Benutzeranleitung / Produktwartung TravelMate 2000 des Produzenten Texas Instruments
Zur Seite of 208
Texas Instruments TravelMate 2000 Notebook Computer User’s Manual.
Contents Preface .................................................................................................... v 1 Taking a First Look The Hardware ...................................................................................... 1-3 TravelMate 2000 Options .
Contents 5 Application Programs Guidelines for Installing Applications .............................................................................. 5-3 LapLink .........................................................................................
Copyright(C) 1990 Texas Instruments Incorporated All Rights Reserved - Printed in U.S.A TravelMate 2000 Personal Computer, User's Manual Part No. 2568084-0001 Original Issue: July 1990 Revision C: January 1991 Changes may be made periodically to the information in this publication.
Preface Congratulations ... you have purchased one of the most powerful notebook computers available, the Texas Instruments TravelMate TM 2000 Computer.
Preface When you open the container in which your computer is packaged, you will find the following items: Computer Battery AC A daptor AC Cord Parallel Port Conversion Adaptor .
Preface Conventions and Symbols Throughout this manual, the following conventions are used to distinguish elements of text: SMALL CAPS Used for commands, options, switches, and literal portions of syn.
Preface About this Manual This manual describes the operation of your Texas Instruments TravelMate 2000 Notebook Computer. We have designed this manual so that you can locate information quickly and easily. Each chapter begins with a title page that gives the major sections in the chapter.
Preface Chapter 3 - Setting Up tells you what to do to get your TravelMate 2000 ready for operation. Chapter 4 - Getting Started shows how to customize the TravelMate 2000 for your own special needs.
Preface Appendix G - BIOS Messages lists the error messages you may encounter and what to do about them. Appendix H - Configuring Memory illustrates the TravelMate 2000's memory map and describes the memory options of the computer.
Preface What to Read Before performing any of the tasks below, we recommend you read the corresponding chapter(s) in this manual. Quick start - Chapters 3 and 4 Setting up the TravelMate 2000 .
1 Taking A First Look This chapter tells you about: Computer hardware such as the system main circuit board, the display, and the keyboard Options for your TravelMate 2000 Software operating systems and application programs Caring for the Hard Disk Contents The Hardware .
Contents The Software................................................................................................................... 1-10 The Hard Disk ...............................................................................................
The Hardware This is what the standard TravelMate 2000 Computer looks like when it is closed. Here's how the TravelMate 2000 looks when it is set up and ready to operate.
The Hardware Let's take a closer look at each part of the computer. The TravelMate 2000's hardware consists of a system board, keyboard, liquid crystal display (LCD) screen, hard disk drive, I/O (input/output) ports, and other electronic circuits needed to control the display and externally connectable options.
The Hardware RAM RAM (Random Access Memory) stores data and application software for the processor. You can write to or read from RAM freely, but once the power is turned off, the data in RAM is lost. RAM size is described by the amount of information (bytes) it can store.
The Hardware LCD Screen The LCD screen acts as a window where the computer sends information for you to view. Information entered on the keyboard, read from the hard disk or a floppy, or sent via a modem, for example, is displayed on the screen.
TravelMate 2000 Options The performance of a standard TravelMate 2000 can be enhanced with the addition of hardware options available from Texas Instruments. These options enable you to send and receive data over telephone lines, operate the computer for longer periods, use external displays, increase memory, and a variety of other features.
TravelMate 2000 Options Laser and impact Printers External Keyboards Add-On Battery Pack Attaching the optional Add-On Battery Pack to the rear of the TravelMate 2000 adds 3 hours to the operating time. When the Add-On Battery Pack is installed, you cannot use the 3.
TravelMate 2000 Options CRT Adaptor Installing the CRT Adaptor into the computer allows you to connect a VGA or multi frequency monitor to the TravelMate 2000. 2400 BPS Modem with Send-Fax and MNP Class 5 (Internal Modem) Installing the internal modem card in the TravelMate 2000 allows you to send Facsimile (fax) information over telephone lines.
The Software A computer system needs software before it can carry out any useful task. Without software, your computer is just a collection of electrical components. In order to use computer hardware for tasks like writing memos or balancing a checking account, software is necessary.
The Hard Disk The hard disk is a permanently installed magnetic disk. Information is read from and written to both sides of the disk at extremely high speeds by heads that float above the disk surface on a cushion of air.
The Hard Disk Never subject the computer to strong vibration or sudden shocks, especially during transportation. You can move your computer with the power on; however, it is a good idea to put the computer in Standby mode. Always keep backup floppies of all programs and data stored on your hard disk, just in case of a hard disk failure.
2 More About Hardware This chapter tells you about: Your LCD screen and how to adjust it Controls and connectors on the sides of the TravelMate 2000 case Common keyboard key assignments Indicators and their meanings Contents LCD Screen .
Contents Keyboard ........................................................................................................................ 2-13 Enter Key .................................................................................................
LCD Screen Your TravelMate 2000 displays text and graphics on a triple supertwist, illuminated, liquid crystal display (LCD), giving true black-on-white contrast. The TravelMate 2000 can emulate IBM's video graphics array (VGA), and it displays colors as 16 shades of gray.
LCD Screen Screen Angle The LCD screen can be adjusted for the best viewing angle, but be careful not to tilt the screen more than necessary. Appropriate angles are 90' to 132' from horizontal. Caution: To ensure safety and save battery, power, an alarm sounds for about 90 seconds when the screen is closed with the power on.
LCD Screen Contrast Control The Contrast Control adjusts the contrast between the displayed information and the background for the best viewing condition. Use in conjunction with the Brightness Control. Brightness Control The Brightness Control adjusts the brightness of the illuminated display.
Right Side Panel The right side panel on the computer contains the numeric keypad connector and the security hook holder, as shown and described below. Numeric Keypad Connector The Numeric Keypad connector connects the optional Numeric Keypad to your computer.
Left Side Panel There are two connectors and a slide switch on the left side panel of the computer, as illustrated and described below. Caution: Connections and settings made on the left side of the computer must be done with the power off.
Left Side Panel LCD/CRT Switch The TravelMate 2000 can display on either the standard LCD screen or on an external VGA monitor connected to the optional CRT Adaptor. Set the LCD/CRT switch appropriately. When the switch is set to CRT with the optional CRT Adaptor installed, the computer LCD screen is off.
Rear Panel The rear panel of the computer has two connectors and an AC Adaptor jack. Expansion Bus Connector The optional Floppy Drive Unit or the optional Expansion Unit plugs into the expansion bus connector on the rear of the TravelMate 2000. For details, see Chapter 6.
Rear Panel AC Adaptor Jack The AC Adaptor plugs into this jack for recharging the battery or supplying ac power to the computer. See Chapter 3 for instructions on how to recharge the battery. Caution: Use only the supplied AC Adaptor with your TravelMate 2000 Computer.
Bottom Panel Battery Slot The bottom panel of the computer has a slot for the supplied internal battery. For battery installation instructions, see Chapter 3.
Front Panel The front panel of the computer has a power switch, an optional card slot cover, a keyboard, and eight indicators. Power Switch The power switch turns the power to the computer on and off for both battery-powered and ac operation. Set the switch to the I position to turn on the computer and to the position to turn off the computer.
Keyboard The TravelMate 2000 keyboard provides all the functions of the IBM enhanced keyboard. Many of the keys on the keyboard are similar to those on a standard typewriter. There are some keys, however, that might not be familiar to you. The following is a description of keys not found on a standard typewriter.
Keyboard Enter Key The Enter key is generally used to end a line or menu entry and move to the next one; also referred to as the Return key. Shift There are two identical Shift keys. Any alphanumeric key pressed while the Shift key is held down gives that key's uppercase character or the symbol on the top of the keytop.
Keyboard Tab The Tab key works like the tab key on a regular typewriter. Pressing the Shift key with the Tab key allows you to backtab. Backspace ( ← ← ) The ← (Backspace) key moves the cursor to the left one space at a time, erasing the character to the left of the cursor.
Keyboard Cursor Control Keys The four arrow keys move the cursor by spaces or lines in the direction of the keytop arrows. The Fn key shifts the functions of these keys to Home, End, PgUp, and PgDn. These cursor and screen control functions may vary according to the software application.
Keyboard Del (Delete) The Del (Delete) key is used to delete the character at the cursor position. In MS-DOS and many applications, remaining characters usually move left to fill the space. Num Lk The Num Lk key (Fn - Ins) toggles the numeric keypad keys on and off.
Keyboard Prt Sc Pressing the Fn and Sys Rq keys together gives you the Prt Sc (Print Screen) key. This prints whatever is displayed on the screen when a printer is connected. Note that the MS-DOS utility GRAPHICS.COM must first be executed in order to print graphic displays: otherwise, only text characters will be printed.
Status Indicators There are eight status indicators on the upper left of the keyboard which light to show the state of the battery, keyboard and drives. Power The Power indicator lights green when the power is on, and lights orange when the computer is in the standby mode.
Status Indicators Hard Disk The Hard Disk indicator comes on when the computer writes to or reads from the built-in hard disk. Caps Lock The Caps Lock indicator comes on when you press the Caps Lock key to toggle on the caps lock function.
3 Setting Up This chapter tells you about: Operating and storage environments for your Travel-Mate 2000 Installing, removing, and charging the battery Setting the DIP switches Contents Guidelines & Precautions .........................
Guidelines & Precautions Use your TravelMate 2000 according to the following environmental specifications and operating guidelines. Operating Environment When using your computer, always try to ensure that the temperature and humidity of the surroundings fall within the following ranges.
Installing the Battery] Follow these steps to install the battery. Charging the battery is described later. 1. Turn the computer off and disconnect the AC Adaptor. 2. Carefully turn the computer over on a padded surface. Then remove the battery cover by sliding it to the left.
Installing the Battery Note: When installing the battery, be careful to keep the lead wires out from under the battery. 4. Set the battery into the case. 5. Replace the battery cover by aligning the tabs on the cover with the slots on the computer, then slide the cover to the right.
Removing the Battery To remove the battery (when installing an internal option, for example): 1. Turn off the computer and disconnect any external devices. 2. Position the computer with the bottom panel facing up and remove the battery cover by sliding it to the left.
Removing the Battery 3. Covering the battery slot with your hands, turn the computer over and take out the battery. 4. Disconnect the battery connector. 5. Replace the battery cover by aligning the tabs on the cover with the slots on the computer, then slide the cover to the right.
Charging the Battery/AC Operation The AC Adaptor supplied with your TravelMate 2000 can be used to charge both the internal battery and the optional Add-On Battery Pack, as well as to operate the computer on ac power, Caution: Use only the AC Adaptor supplied with your TravelMate 2000.
Charging the Battery/AC Operation 3. After the battery is completely discharged, recharge the battery completely using the AC Adaptor. a. Plug the female end of the supplied ac cord into the inlet on the AC Adaptor body. b. Plug the male end of the ac cord into a grounded outlet.
Setting DIP Switches Two DIP switches are provided inside the computer. These switches allow you to control whether an alarm sounds when certain conditions are met. 1. Turn off the computer and disconnect the AC Adaptor if installed. 2. Locate the option card slot cover on the top left of the computer.
Setting DIP Switches 5. Set these two DIP switches appropriately using a pointed object such as a ball-point pen. The DIP switches are used to control the following functions: Screen Closed Alarm/ Switch 1 System Speaker ON On OFF Of f Switch 2 Low Battery Alarm ON On OFF Of f Note: Change the DIP switch settings only when the power is off.
4 Getting Started This chapter tells you about: Starting up your TravelMate 2000 Defining your set-up options Setting up your LCD Configuring your hardware Contents System Start-up ......................................................
Contents System Timeout ........................................................................................................ 4-12 System Configurations ...............................................................................................
Contents Drive C/Drive D ....................................................................................... 4-24 Memory Configuration ...................................................................................... 4-24 Internal Memory Size .
System Start-up The TravelMate 2000 computer comes from the factory with software already installed on the hard disk. The TravelMate 2000 computer contains MS-DOS, version 4.
System Start-up 3. If you have not removed the internal battery or installed an internal option, the computer displays the Laptop Manager screen. Restoring Your System Configuration The system configu.
System Start-up 6. Press the SetUp key and then press the Enter key to exit the Hardware Installation screen and restart the computer. 7. When the Laptop Manager main menu appears, press the F8 (Reset Config) key to complete resetting the factory default values.
Accessing the Set Up Screen You can customize many of the settings of your system so that your TravelMate 2000 always powers up with those settings. Normally, you should access the Set Up screen when the MS-DOS prompt is displayed, although you can access the Set Up screen from an application program.
Making Selections on the Set Up Screen 1. To move forward through each field, use the → key (Right Arrow) or the ↓ key (Down Arrow). To move backward through each field, use the ← key (Left Arrow) or the ↑ key (Up Arrow). To move to the first field in the next category, press the PgDn key (Page Down).
Making Selections on the Set Up Screen] 3. Press the Set Up key or the Esc key when you have finished all entries. Then the system prompts you to press the Enter, Esc, or Set Up keys. 4. Press the Enter key to save the new settings and return to MS-DOS.
Set Up Screen Fields Clock The computer contains a battery-operated clock that keeps track of the time and date. This category allows the current time and date to be set and modified. Time This field specifies the current time. Time is set either in a 12-hour or a 24-hour clock format depending on the country setting.
Set Up Screen Fields To use the entire display, set the LCD mode to Expanded. However, for some CGA- and EGA-based applications where the aspect ratio is critical, it may be desirable to use the Standard setting. Keyboard This category specifies the state of the three lock keys and the key repeat rate when the system is started up.
Set Up Screen Fields Display Timeout After a certain period of inactivity, with no input from the keyboard, the system automatically shuts off the power to the LCD screen. Pressing any key on the keyboard turns the LCD back on. The length of the timeout period can be set or the LCD can be kept on continuously.
Set Up Screen Fields System Configurations This category specifies various settings concerning the system configuration. CPU Speed/Bus Speed These fields specify the CPU clock speed and bus clock speed used on power-up. The speeds are set as a pair and change simultaneously to the values displayed when you exit the Set Up screen.
Set Up Screen Fields You can hear a high-pitched beep when pressing the Ctrl-Alt- ↑ ↑ keys and a lower pitched beep when pressing the Ctrl-Alt- ↓ ↓ keys. The higher beep results from the higher CPU speed, while the lower beep results from the lower CPU speed.
Setting Up the LCD The TravelMate 2000 computer gives you many ways to set up the LCD, which allows you to create the screen configuration that suits your needs best.
Setting Up the LCD The LCD/CRT switch (on the left side panel) determines whether the image is displayed on the LCD or on an optional external VGA monitor. When the LCD/CRT switch is set to CRT, the internal VGA display adaptor sends display signals to an external monitor connected to the optional CRT Adaptor.
Setting Up the LCD Text Mode In text mode, text is displayed on a 25-line screen in either 40 or 80 columns in CGA, EGA and VGA modes. Graphics Mode The TravelMate 2000 LCD screen can display high-quality graphic images. The VGA mode gives the best results, since it has the highest screen resolution.
Setting Up the LCD Changing the LCD Color Palette The TravelMate 2000 LCD screen displays up to a maximum. of 16 colors as shades of gray. The shade of gray selected to represent each of the 16 colors can be changed by the user to maximize contrast between adjacent gray scale shades when running programs which use particular color combinations.
Displaying the Hardware Installation Screen If you have removed the battery or added an internal option, you may need to configure the hardware on the Hardware Installation screen.
Displaying the Hardware Installation Screen The Hardware Installation screen with its default settings appears as follows: 4-20 Getting Started.
Making Selections on the Hardware Installation Screen 1. To move forward through each field, use the → key (Right Arrow) or the ↓ key (Down Arrow). To move backward through each field, use the ← key (Left Arrow) or the ↑ key (Up Arrow). To move to the first field in the next category, press the PgDn key (Page Down).
Hardware installation Screen Fields Display Configuration There are two settings for the display. Display Mode The Display Mode specifies the mode of the internal VGA controller. The possible settings are: VGA Mode, EGA Mode, CGA mode, MDA mode, and HGC mode.
Hardware Installation Screen Fields Internal Parallel Port This field assigns a number to the standard parallel port. Possible settings are Port 1, Port 2, and Disable. ROM Disk Port This field specifies the ROM disk I/O port address. The possible settings are from 108h- 10Bh to 1F8h- 1FBh.
Hardware installation Screen Fields Drive C/Drive D These fields specify the drive assignments of the internal hard disk and the ROM disk. You should usually assign Drive C to the Internal HDD and Drive D to none. If you need to boot from the ROM disk to restore the system, you should assign Drive C to the ROM disk and Drive D to the internal HDD.
Hardware Installation Screen Fields Disabled Memory- This field shows the amount of memory which is not available to the user. See Appendix H for the relationship between the settings in this category and each memory size.
Restarting the System You may sometimes want to return the system to its start-up state-with only MS-DOS, CONFIG.SYS and AUTOEXEC.BAT in memory-without turning off the power.
Backing Up the Hard Disk Although the hard disk is a precision device, the data stored in it may be lost due to shock or vibration of the disk or in the event of disk or hardware failure. Once lost, the data cannot be restored unless you have backup copies.
5 Installing and Using Application Programs This chapter tells you about Guidelines for loading IBM AT-compatible application programs The furnished LapLink program that transfers files and le.
Contents LapLink File Transfer Utility .................................................................................. 5-10 LapLink Device Driver ........................................................................................... 5-11 Laptop Manager .
Guidelines for Installing Applications Your TravelMate 2000 is fully compatible with IBM AT computers - All application programs written to execute on AT computers will execute on the TravelMate 2000, and you can install the programs in much the same way on the TravelMate 2000.
Guidelines for Installing Applications Installing Programs Not Copy-Protected If the application program you want to install in the TravelMate 2000 is not copy-protected and is already installed on another AT-compatible computer, you can use LapLink to copy the program to your TravelMate 2000.
Guidelines for Installing Applications Installing Applications Using the Floppy Drive Option If you have the optional floppy drive unit attached to your TravelMate 2000, you can use it to install any application programs available on 3.5-inch floppies.
Guidelines for Installing Applications Communication Ports The serial port is Port 1 (default) and the optional Internal Modem, if installed, is Port 2 (default). When installing an application program requiring communication support, select Port 1 or Port 2, as appropriate.
Guidelines for Installing Applications Review your application program documentation for its memory requirements and set up the TravelMate 2000 memory to maximize your program's performance. AUTOEXEC.BAT and CONFIG.SYS Files If your application program requires additions or changes to the TravelMate 2000 AUTOEXEC.
Guidelines for Installing Applications Default AUTOEXEC.BAT File Line Purpose 1 echo off - prevents the Me from displaying on the screen when invoked 2 ver - displays version number of MS-DOS 3 set comspec=c:doscommand.corn - tells MS-DOS to get its COMMAND.
Guidelines for Installing Applications Default CONFIG.SYS File Each line of the TravelMate 2000 default CONFIG.SYS file and its purpose are defined in the table following the file listing. You can add commands required by your application program(s), but do not delete the existing default commands.
LapLink The LapLink file transfer and device driver programs, products of Traveling Software Inc., are furnished with your TravelMate 2000. LapLink makes it practical to use a computer without a floppy drive. LapLink requires use of a special cable also furnished with your TravelMate 2000.
LapLink LapLink displays a split screen: on one side you see the files and directories on one computer and on the other side the files and directories on the other computer. The split screen not only tells you what is happening on both computers but also gives you access to both.
LapLink One of the most common uses of the device driver is sharing a printer. You can create files on your TravelMate 2000 and, through the device driver, print them on a printer already connected to a second computer.
Laptop Manager Laptop Manager, furnished with your TravelMate 2000, is an application control program. Laptop Manager provides two submenus into which you can insert application programs you have installed on the hard disk.
Laptop Manager Quick Commands Box Application programs you add to the Quick Commands box can be selected by pressing the function key (F2 to F9) you assign to it.
Using the Password Utility The TravelMate 2000 includes the Password utility, a program which limits access of your computer only to people who know the password you specify using this utility. The password is valid until you remove or change it using the Password utility.
Using the Password Utility Installing a Password 1. To install a password, select "Install Password" from the Password Utility screen. The following screen appears: 2.
Using the Password Utility 2. Type the current password and press the Enter key. Your entry is shown as squares so that it is not seen by other people. If you type the correct password, the message "Password check OK" appears on the next line and you are prompted to enter the new password.
Using the Password Utility 2. Type the current password and press the Enter key. Your entry is shown as squares so that it is not seen by other people. If y ou type the correct password, the message "Password check OK" appears on the next line.
Using the Password Utility If you enter the correct password after several incorrect passwords, the following message appears: Password : Password OK incorrect passwords attempts Press any key to continue This message shows how many wrong passwords have been entered since you last entered the correct password.
6 TravelMate 2000 Options This chapter tells you about: Options available for your TravelMate 2000 FCC requirements for modem users Care for your modem Contents Add-On Battery Pack ..........................................................
Add-On Battery Pack The Add-On Battery Pack attaches to the rear of the TravelMate 2000 to extend battery operation time up to 5 hours. In order to save weight and still have longer battery life, the Add-On Battery Pack can be used without the internal battery installed.
Add-On Battery Pack 4. Move the battery pack up to the rear of the computer, and push the two units together until the connectors mate. 5. Using your fingers, turn the two wheel screws clockwise until tight. Charging the Battery Pack The Add-On Battery Pack can be charged separately or when attached to the computer.
Add-On Battery Pack When charged separately, the Add-On Battery Pack takes about 3.5 hours to fully charge. When installed along with the Internal Battery, charging takes about 5-1/2 hours. The indicator on the top right of the Add-On Battery Pack blinks while it is being charged, and illuminates when it is at least 70 percent charged.
3.5-inch Floppy Drive Unit The optional 3.5-inch Floppy Drive Unit (TI Part No. 2568031 -0001) can be attached directly to the rear panel of the TravelMate 2000 or to the Expansion Unit attached to the computer. Attaching the Floppy Drive Unit To attach the 3.
3.5-inch Floppy Drive Unit 4. Turn the two wheel screws on the floppy drive unit clockwise to secure the floppy drive unit to the computer. Note: Do not transport the TravelMate 2000 when the Floppy Drive Unit is attached. Using the optional 3.5-inch Floppy Drive Unit enables you to add a 5.
3.5-inch Floppy Drive Unit Formatting a Floppy In order to store data on a floppy, the operating system must first prepare-format-the floppy. This process enables data on the floppy to be easily located. During formatting, the floppy is divided into circular tracks, similar to those on a phonograph.
3.5-inch Floppy Drive unit Access Shutter-The access shutter allows the drive head to read from and write to the floppy. The shutter opens automatically when you insert the floppy into the drive. Do not open the shutter manually, as this will expose the floppy surface to dust.
3.5-inch Floppy Drive Unit Never remove a floppy from the drive while the computer is reading from or writing to the floppy. Never expose floppies to moisture, excessive heat or direct sunlight. If a floppy appears to be damaged, make a copy of it if possible, and discard the damaged floppy immediately.
Numeric Keypad Connecting the optional Numeric Keypad (TI Part No. 2568033-000 1) enables numeric data to be conveniently entered while still permitting data entry on the keyboard. The Numeric Keypad also adds the convenience of direct access to some functions (such as PgUp, PgDn, Home, etc.
Numeric Keypad 3. Attach the Numeric Keypad to the computer by joining the connector on the left side of the Numeric Keypad with the connector on the right side of the computer. 4. Using your fingers, turn the wheel screw on the Numeric Keypad clockwise until tight.
RAM Card The TravelMate 2000 computer comes with 1 M byte of main memory (RAM). If you need to expand the RAM capacity, up to two optional RAM cards (TI Part No. 2568034-0001), each containing 1 M byte of memory, can be installed. Installing the RAM Card 1.
RAM Card 4. Holding the keyboard, set the computer upright. Place the keyboard in front of you with the keys facing down as shown in the following figure. Caution: Prevent possible component damage cause by electrostatic discharge (ESD). Use a high-impedance, grounded-conductive floor mat or wrist strap to prevent ESD.
RAM Card 6. Insert the three tabs on the keyboard panel into the slots on the main unit, replace the keyboard panel and close the screen. 7. Holding the bottom panel with your hands, turn the computer over so that the bottom panel faces up. 8. Secure the bottom panel with two screws.
RAM Card After installing the RAM card, return to the Hardware Installation Screen to set the correct amount of extended and/or expanded memory. In addition, the settings on the Set Up and Hardware Installation screens may no longer be valid if you kept the battery out too long during installation of the RAM card.
CRT Adaptor The CRT Adaptor (TI Part No, 2568035-000 1) supplies an optional CRT port for your TravelMate 2000. With this adaptor installed, an analog multi frequency or a VGA monitor with a 15-pin male connector can be used with your computer.
CRT Adaptor 4. With the component side facing down, insert the CRT Adaptor into the slot. Be sure that the connectors on the computer and on the lower side of the CRT Adaptor fully mate, and then tighten the two screws on the CRT Adaptor. 5. Close the option card slot cover by pushing down on both sides of the cover and replace the template.
External Monitor Using the optional CRT Adaptor allows you to connect an external monitor via a 15-pin analog connector. To connect an external monitor: Caution: Always turn the computer off before operating the LCD/CRT switch on the left side of the computer.
2400 BPS Modem with Send-Fax and MNP Class 5 The 2400 BPS Modem with Send-Fax and MNP Class 5 (Internal Modem) option (TI Part No. 2566941- 0001) adds a 2400 bits-per-second (bps) modem to your TravelMate 2000. For modem or fax-sending operation, you can connect your TravelMate 2000 to the telephone network.
80C287 Coprocessor A Texas Instruments 80C287 coprocessor can be added to your system to speed up processing and improve throughput of calculations with application programs that support a math coprocessor.
80C287 Coprocessor 4. Holding the keyboard, set the computer upright. Place the keyboard in front of you with the keys facing down as shown in the following figure. 5. Making sure that the pins on the 80C287 coprocessor are straight and aligned with the socket, insert the 80C287 coprocessor into the socket.
80C287 Coprocessor 6. Insert the three tabs on the keyboard panel into the slots on the main unit and replace the keyboard panel. 7. Holding the bottom panel with your hands, turn the computer over so that the bottom panel faces up. 8. Secure the bottom panel with two screws 9.
80C287 Coprocessor Because you removed the battery during installation, the settings on the Set Up and Hardware Installation screens may have changed. From the Set Up and Hardware Installation screens, enter appropriate values for each category, as described in Chapter 4.
External Keyboards The TravelMate 2000's standard keyboard supports all the key functions of the IBM 101/102-key Enhanced Keyboard layout. In addition, a full-sized keyboard can be connected to the TravelMate 2000 via the external keyboard connector on the optional 3.
Printers Texas Instruments makes a variety of printers, any of which can be used with your TravelMate 2000. To connect a parallel printer, use the supplied conversion adaptor between the parallel port and the TravelMate 2000 printer port. To use a serial printer, connect the printer to the serial port on the left side of the TravelMate 2000 case.
A Specifications Central Processing Unit (CPU) Type: 16-bit 80C286 Clock Speed: 6 MHz/7.16 MHz/ 12 MHz Memory RAM: 1 M byte internal RAM standard, expandable to 3 M bytes. ROM: 128 K byte P-ROM for IPL, BIOS, power-on check, set up and hardware installation functions, and VGA-BIOS.
Specifications Power Source NiCad battery: 1 1 .5 watt hours/AC Adaptor AC Adaptor Input: 100 to 240 Vac, 0.7 to 0.4 A, 50 to 60 Hz Output: 15 Vdc, 1.8 A, approx.
Specifications Options Add-On Battery Pack TI Part No. 2568030-0001 Attaches to rear of TravelMate 2000 Extends battery life by approx. 3 hours Size: Width: 1 1 inches (279 mm) Depth: 2.3 inches (59 mm) Height: 1.4 inches (34.5 mm) Weight: 1.9 lbs (880g) Internal Modem TI Part No.
Specifications 80C287 Coprocessor TI Part No. 2560874-0001 16-bit 80C287 running at 12 MHz CRT Interface Board TI Part No. 2568035-0001 15-pin D-SUB analog connector Size: Width: 2.2 inches (55 mm) Depth: 4.3 inches (110 mm) Height: 0.6 inches (16 mm) Weight: 0.
Specifications Numeric Keypad TI Part No. 2568033-0001 Size: Width: 3.9 inches (99 mm) Depth: 5.5 inches (139 mm ) Height: 0.9 inches (24 mm) Weight: 0.
B Taking Care of Your Computer We recommend that you regularly take the time to check over your TravelMate 2000 and to clean the screen, keyboard and case. You can spot trouble before it starts, and help give you efficient, trouble-free computing with your TravelMate 2000.
Do's and Don'ts The TravelMate 2000 is a precision instrument containing many sensitive components. It should be handled with care. Here are some steps you can take to prevent damage to your system: Never use the TravelMate 2000 in harsh environments where it may be subjected to rapid temperature changes or excessive dust.
Cleaning the TravelMate 2000 Cleaning the Case It is important to keep the case of the TravelMate 2000 free of dust. Apply a small amount of dust remover to a dry, lint-free cloth and wipe the case with the cloth. Never use alcohol, benzine, thinner or other strong chemical agents that may damage the TravelMate 2000's case.
Conserving Battery Power With a little care, you can maximize the time that your TravelMate 2000 will operate on a single battery charge. The following tips will enable you to run your computer for the longest possible time on battery power. Keep the illumination of the LCD screen at the lowest comfortable brightness level.
Care and Handling of the Battery] The battery should be handled carefully to ensure maximum life. In particular: Do not drop the battery or subject it to shocks. Do not leave the battery exposed to direct sunlight. Do not try to take the battery apart.
Care and Handiing of the Battery When using the computer or External Battery Pack for the first time, or after prolonged storage in temperatures over 95 o F (35 o C), the life of a single battery charge may initially be shorter than normal. This problem will disappear after a few discharge-recharge cycles.
C Character Set The TravelMate 2000 Computer character sets are identical to the IBM Code Pages for DOS version 4. 0 1. This section shows the character sets for Code Page 437 (United States), 850 (Multilingual), 860 (Portuguese), 863 (Canadian-French), and 865 (Nordic), with the decimal and hexadecimal codes for each character.
Character Sets Code Page 437, United States C-2 Character Sets.
Character Sets Code Page 850, Multilingual Character Sets C-3.
Character Sets Code Page 860, Portuguese C-4 Character Sets.
Character Sets Code Page 863 (Canadian-ftench) Character Sets C-5.
Character Set Code Page 865, Nordic C-6 Character Sets.
D Keyboard Layouts The following diagrams show the TravelMate 2000 Computer keyboard layouts for the Fn and Num Lk keys. These combinations make all 10 1 / 102 keys on the IBM Enhanced Keyboard layout available.
Keyboard Layouts U.S. English Keyboard Fn Key Held Down U.S. English Keyboard Num Lk Key On D-2 Keyboard Layouts.
Keyboard Layouts IBM Enhanced Keyboard Keyboard Layouts D-3.
E Diagnostics There are two diagnostic routines available to make sure your TravelMate 2000 Computer and its peripherals are functioning as they should.
Diagnostics Diagnostic Program If the power-on diagnostic routine doesn't display any messages, but you suspect there is a problem, run the diagnostic Program included with MS-DOS on the ROM disk.
Diagnostics Starting the Diagnostic Program Turn on power to the computer, and at the C:> prompt type DIAG and press the Enter key. The diagnostic program starts up.
Diagnostics Memory This category contains the following checks: Caution: These checks will destroy the contents of the memory. Main Memory Check - Reads/writes data in the standard memory area. The check stops at the first error and displays an error message.
Diagnostics DAC Check - Checks the digital-to-analog converter in the VGA subsystem when the optional CRT Adaptor is installed. Attribute Check - Displays 16 foreground, 8 background, and 8 blinking shades of gray. Character Set Check - Displays characters on the screen normally on an 80-by-25 text mode display.
Diagnostics Printer This test checks the operation of the printer, if one is connected. After selecting the test, the printer submenu is displayed on the screen with the following categories: Sense Printer Status Check - The printer status signals are checked and displayed.
Diagnostics Hard Disk Drive This test reads and writes data continuously to the hard disk to test the read/write ftinctions of the drive. After selecting the test, the hard disk submenu is displayed on the screen. Caution: The write-read check will erase all data on the hard disk.
F Troubleshooting This section is designed to help you solve common problems you may encounter while using your TravelMate 2000 Computer. If you encounter a problem which is not listed here, please contact your nearest Texas Instruments dealer.
Troubleshooting The unit starts up but a TravelMate 2000 hardware -Turn message Indicates that a the unit off and then on again. If power-on test has failed. the same message appears, check against the list of power-on error messages in the next section, and if necessary, make a note of the message and contact your Texas Instruments dealer.
G BIOS Messages Power-up self-tests are the system tests and component initialization processes performed by the AT-compatible ROM BIOS in the TravelMate 2000 Computer. The central hardware is tested and initialized first. Proper functioning of the central hardware is required before further system tests can be run.
BIOS messages Hard disk failure Reboot. If that doesn’t work, run the DIAG program to check the hard disk drive, then contact your Texas Instruments dealer. Hard disk read The hard disk is defective - Reboot. failure If that doesn’t work, run the DIAG program to check the hard disk, then contact your Texas Instruments dealer.
BIOS Messages Time-of-day clock The CMOS time-of-day clock chip stopped has failed -Reset the time and date on the Set Up screen (see Chapter 4). Power-Up Self Test Informational Messages XXX Main Memory, This message indicates the amount XXX Extended of memory that has tested successfully.
H Configuring Memory Computers handle information as strings of binary digits; one's and zero's. A single 1 or 0 is referred to as a "bit", the smallest piece of information handled by the processor.
Memory Map MS-DOS accesses different areas of the TravelMate 2000's memory in different ways. Tliis memory map shows the available memory areas and how MS-DOS uses them.
Memory Areas in the TravelMate 2000 Conventional memory Also referred to as main memory, conventional memory is internal RAM up to 640 K bytes that MS-DOS accesses directly. Conventional memory is used for the execution of programs and commands and for storing temporary data.
Memory Areas in the TravelMate 2000 The total amount of internal memory above 640 K byte can be assigned to either Extended memory or Expanded memory by setting the internal memory size and boundary address on the hardware installation screen. The relationship between these two settings and each memory size is shown below.
Memory Areas in the TravelMate 2000 Internal Memory: 3 M byte Boundary Extended Expanded Disable 100000H 0 K byte 2432 K byte 0 K byte 110000H 64 K byte 2368 K byte 0 K byte 140000H 256 K byte 2176 K .
Memory Areas in the TravelMate 2000 SMARTDRV.SYS - device driver for use with a hard disk and Extended or Expanded memory that supports disk-caching to speed up reading from the hard disk. Installing Device Drivers To install a driver, add a DEVICE command line to your CONFIG.
Memory Areas in the TravelMate 2000 If you need to specify special conditions for Expanded memory, use the command in the following form: DEVICE=C:DOSEMM4J.
Memory Areas in the TravelMate 2000 HIMEM.SYS HIMEM.SYS is an eXtended Memory Manager (XMM) conforming to eXtended Memory Specifications (XMS), version 2.0, HIMEM.SYS uses 64 K byte of the high-memory area (HMA) at the beginning of Extended memory to store a single TSR program or device driver, or it uses this area for data storage.
Memory Areas in the TravelMate 2000 If you need to specify special conditions for the use of the high-memory area, use the command in the following form: DEVICE=C:DOSHIMEM.
Memory Areas in the TravelMate 2000 RAMDRIVE.SYS A RAM disk is a portion of your computer's memory configured to simulate a disk drive. Such a disk can be called a "virtual disk" and can be accessed much faster than a normal disk drive.
Memory Areas in the TravelMate 2000 SMARTDRV.SYS SMARTDRV.SYS is a disk-caching program used to reduce the time it takes your computer to read data from the hard disk. When SMARTDRV.SYS is installed, information from the hard disk is temporarily stored in a cache in Extended or Expanded memory.
I Connector Pin Assignments RS-232C Connector Pin No. Signal Name Abbreviation Direction 1 Ca rrier detect CD Input 2 Receive data RD Input 3 Transmit data TD Output 4 Data terminal ready DTR Output 5.
Connector Pin Assignments CRT Connector (option) Pin No. Signal Name Direction 1 R ed Output 2 Green Output 3 Blue Output 4 Not used 5 Ground 6 Red Rtn 7 Green Rtn 8 Blue Rtn 9 Not used 10 Ground 11 N.
J Screen Standards The following is an overview of the screen standards supported by the TravelMate 2000 internal display adaptor. MDA (Monochrome Display Adaptor) The MDA standard supports a 720-by-350 monochrome text display using a 9-by- 14 pixel character box.
Screen Standards Color graphics are supported by displaying color in two resolutions, each with standard and expanded modes: Resolution : 320 by 200 pixels with four shades of gray Standard One pixel .
Screen Standards Color graphics are supported in three resolutions, each with standard and expanded modes: Resolution: 320 by 200 in 16 shades of gray Standard One pixel is converted to a 2 x 2 cell D.
Screen Standards VGA (Video Graphics Array) The VGA standard supports 640-by-480 pixel monochrome or 16-color graphics and 320-by-200 pixel 256- color graphics, and uses an 8-by-16 pixel character box for text display. The TravelMate 2000 LCD screen supports VGA by displaying text in an 80-column.
Screen Standards HGC (Hercules Graphics Card) The HGC standard supports a high-resolution 720-by-348 pixel monochrome text or graphics display. The text display for HGC mode is the same as for MDA mode. The TravelMate 2000 LCD screen does not support HGC graphics mode.
K Restoring MS-DOS System Files The MS-DOS files COMMAND.COM, IO.SYS, and MSDOS.SYS are necessary for the operation of your computer. If any of these files are accidentally deleted or modified, your computer will not function.
Restoring MS-DOS System Files 1. Press the Ctrl-Alt-SetUp keys to access the Set Up screen, then press the Ctrl-Alt-SetUp keys again to access the Hardware Installation screen. 2. Press the ↓ ↓ key until the Drive C:/Drive D: field is highlighted, then press the Spacebar to toggle Drive C: to ROM Disk, and Drive D: to Internal HDD.
Restoring MS-DOS System 6. Press the Enter key. The following screen appears: Use the ↑ ↑ or ↓ ↓ keys to select option 1, 2, or 3 and press the Enter key. Caution: If you select option 3, some application software may not run properly because of insufficient workspace.
Restoring MS-DOS System Files This screen lets you select the appropriate country and keyboard settings for your computer. You can assign the monetary symbol, decimal separator, date and time format, and keyboard layout for the country of your choice.
Restoring MS-DOS System Files 9. Press the Enter key. The following screen appears: The bar cursor highlights option 2, which is to not install the MS-DOS Shell. The MS-DOS Shell is a program that assists you in using your system, much in the same way Laptop Manager assists you.
Restoring MS-DOS System Files 11. Press the Enter key. The screen displays the following Transferring system followed by Copying files When the files are completely copied, the screen displays the following message Installation of MS-DOS 4.0 is complete.
Warranty and Service The TravelMate 2000 Notebook Computer and its Texas Instruments options are warranted for 12 months from the purchase date. Standard Warranty Texas Instruments offers a 1-day turn.
Warranty and Service Complete a separate Repair Request form (on the back of this page) for each computer or option you are returning and include the completed form or forms with your shipment.
Warranty and Service Your name and address Your Name Company Name Address City State Zip Code Phone number ( ) Ext. Product serial number Unit(s) you are returning (check where applicable) ❏ TravelMate 2000 ❏ 3.
Glossary This glossary explains many of the terms found in this manual as well as other computer -related terms you many encounter. access -The ability to obtain data from or place data into internal memory, or a floppy or the hard disk.
Glossary backing up - Duplicating a program or file onto a separate storage medium so that a copy will be preserved against possible loss or damage to the original. backup - A duplicate copy of information or programs; usually stored on a diskette and kept in a separate location in case the original is lost or damaged.
Glossary brightness control - A control that allows you to adjust the brightness of the display. buffer - A portion of the system's memory that temporarily holds information used by a program; for example, the portion of a document you are working on while using a word processor.
Glossary CMOS - An acronym for Complementary Metal Oxide Semiconductor; a large-scale integration technology that requires low power consumption and is therefore used for battery-assisted memory systems. command - The portion of a computer instruction that specifies what operation is to be performed.
Glossary control code - A code that initiates some kind of physical control action that is not printed (such as line feed and tab), turns off an external device, or, in combination with other characte.
Glossary data file - A grouping of information with common descriptive attributes. For example, a customer data file might consist of basic customer information. Each file might represent one customer. data processing - The input, storage, manipulation, and dissemination of information using sequences of mathematical and logical operations.
Glossary double density - A technique used to increase bit density on a magnetic storage medium to twice the amount of single density so that more information can be stored in the same amount of space. double-sided diskette - A magnetic medium capable of storing information on both its surfaces.
Glossary file - A group of organized data assembled for one particular purpose, considered as one unit, and stored in permanent off line storage, such as a drive or tape. filenarne - A name that distinguishes one Me from another; may consist of alphabetical characters, numeric characters, or a combination of both.
Glossary hardware - The physical components of a system: central processing unit, internal memory, drives, printer, display unit, option boards, external devices, etc. Contrast with software. hardware options - Any of several devices that can make your computer more efficient and powerful for your applications.
Glossary K byte- An abbreviation for 1,024 bytes, used to designate the memory capacity of a computer or the storage capacity of a storage device. keyboard - A device, similar to a typewriter keyboard, that allows you to communicate with your computer.
Glossary modem - A device that allows the use of telephone lines for communication between computers. mouse - A device, manipulated by hand, that moves the cursor in the same direction as the movement created when the mouse is moved on a flat surface.
Glossary program - A list of instructions that tells your system how to perform a specific task. program file - A program stored on a storage medium, such as a floppy or hard disk drive. programming language - A set of words, abbreviations, or symbols that are converted into the binary numbers that represent instructions to the system.
Glossary resolution - The contrast between the display and the background on an LCD screen. ROM - See read-only memory . security hook holder - A locking device to help prevent theft of your computer. self-test - An automatic check the system performs every time it is turned on.
Glossary working copy - A copy of a floppy that is used in day-today operations while the original is kept in storage. This term also can mean a floppy that has both an operating system and an application program on it. working directory - the default directory used by an application program when it first is loaded onto the hard disk.
Index 8OC287 12Mhz coprocessor........... 1-7, 6-20 a ac adaptor........................................ 2-10, 3-7 ac adaptor Jack........................................2-10 adaptors display .............................................4-21 internal display .
Index configuring memory ........................ 4-23, H-1 configuring the hardware ........................ 4-19 connector pin assignments ........................ 1 -1 connectors................................................. 1-6 connector pin assignments .
Index f files AUTOEXEC.BAT .............................. 5- 7 CONFIG.SYS ..................................... 5 -7 firmware ................................................... 1 -5 floppy disk ............................................. ...6-6 Floppy Disk indicator .
Index IPL (initial program loader) ..................... 1-5 j Jack, ac adaptor ........................................ 2 -9 k keyboard .......................................... 1-4, 2-13 .................................. 4-10, 5-5, A-2, D-1 customizing your system .
Index R OM ........................................... 1-5, H-1 standard .............................................. 5-6 memory configuration ............................. 4-23 memory map ............................................ H-2 messages, power-on .
Index r R AM................................................. 1-5, A-1 internal ............................................... H-3 card ............................................ 1-4, 6-12 card specifications ............................. A-5 disks.
Index standby mode .......................................... 4-12 start-up...................................................... 4-4 starting the diagnostics program ............... E -3 stop bits .................................................. 4-13 switches DI P.
Notice This computer has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 fo the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installtion.
Texas Instruments reserves the right to change its product and service offering at any time without notice..
.
Manual part No. 2568084-0001, Rev. C Printed in U.S.A. Texas Instruments.
Ein wichtiger Punkt beim Kauf des Geräts Texas Instruments TravelMate 2000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Texas Instruments TravelMate 2000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Texas Instruments TravelMate 2000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Texas Instruments TravelMate 2000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Texas Instruments TravelMate 2000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Texas Instruments TravelMate 2000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Texas Instruments TravelMate 2000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Texas Instruments TravelMate 2000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Texas Instruments TravelMate 2000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
