Benutzeranleitung / Produktwartung 9786166-0001 des Produzenten Texas Instruments
Zur Seite of 286
Maintenance Manual TravelMate 5000 Series Notebook Computers 9786166-0001 March 1995.
Copyright (©) 1995 T exas Instruments Incorporated All Rights Reserved — Printed in U.S.A. T ravelMate TM 5000 Series Notebook Computers Maintenance Manual TI Part No. 9786166-0001 Original Issue: March 1995 Changes may be made periodically to the information in this publication.
Contents Preface 1 General Description 1.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.2 . . . . Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 1.2.1 . . . MultiMedia Features . .
1.7 . . . . Notebook Physical Description . . . . . . . . . . . . . . . . . 1-26 1.7.1 . . . Cover -Display Assembly . . . . . . . . . . . . . . . . . . . . 1-27 1.7.2 . . . System Base Assembly . . . . . . . . . . . . . . . . . . . . . 1-28 1.8 . . .
2.6.5 . . . Installing Exter nal Headphone/Microphones . . . . 2-17 2.6.6 . . . Installing Devices With IR Interface . . . . . . . . . . . 2-18 2.7 . . . . Installing the AC Power Adapter . . . . . . . . . . . . . . . . 2-19 2.8 . . . . Initial System Checkout .
4.2.4 . . . PCMCIA Modem Problems . . . . . . . . . . . . . . . . . . 4-10 4.2.5 . . . Fault Isolation Using Diagnostics . . . . . . . . . . . . 4-10 5 Field Service 5.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Illustrated Parts Listing 6.1 . . . . Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 6.2 . . . . TM5000 Pentium, 10.4 TFT 810HD, Domestic . . . . . . . Notebook with Pack, P/N 9798842-0001 . . . . . . . . . . 6-2 6.2.
D.2 . . . . Memory Areas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-1 D.2.1 . . . Extended Memory . . . . . . . . . . . . . . . . . . . . . . . . D-2 D.2.2 . . . Expanded Memory . . . . . . . . . . . . . . . . . . . . . . . . D-2 D.
F .12 . . . Function F Ah - Subfunction 03h . . . . . . . Get Video Information . . . . . . . . . . . . . . . . . . . . . . . F-9 F .13 . . . Function F Ah - Subfunction 05h . . . . . . . Get Setup Infor mation . . . . . . . . . . . . . . . . . . . . .
Illustrations Figure T itle Page No. 2-4 . . . . Installing PCMCIA Options . . . . . . . . . . . . . . . . . . . . 2-6 2-5 . . . . Installing the Optional PS/2 Numeric Keypad . . . . . . 2-7 2-6 . . . . Installing the Exter nal Microphone and . . . . .
Illustrations Figure T itle Page No. 5-9 . . . . Opening the Base Cover . . . . . . . . . . . . . . . . . . . . . . 5-15 5-10 . . . Keyscan Board, Removal/Replacement . . . . . . . . . . . 5-16 5-11 . . . IR Board, Removal/Replacement . . . . . . . . .
Illustrations Figure T itle Page No. 7-3 . . . . Keyscan Board, P/N 9786209, Logic Diagram . . . . . . . (5 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36 7-4 . . . . Sleep Switch Board, P/N 9786148, Logic Diagram . . 7-41 7-5 .
T ables T able T itle Page No. 1-1 . . . . T ravelMate 5000 Series Notebook Domestic/ . . . . . . . Inter national Configurations . . . . . . . . . . . . . . . . . . 1-24 1-2 . . . . T ravelMate 5000 Series Notebook Specifications . . . . 1-41 4-1 . .
T ables T able T itle Page No. E-2 . . . . Exter nal Monitors Extended VGA Modes . . . . . . . . . . E-2 E-3 . . . . Standard VGA LCD-Only Video Modes . . . . . . . . . . . E-5 E-4 . . . . Extended LCD-Only Video Modes . . . . . . . . . . . . . . . E-6 E-5 .
Pr eface Introduction This manual contains operation, installation and maintenance instructions for the Texas Instruments T ravelMate 5000 Series Notebook Computers. This preface introduces the contents of the manual and lists and describes all related publications.
Contents This manual contains seven sections and seven appendices including: • Section 1: General Description — Introduces the TravelMate 5000 series Notebook Computers and identifies all standard and optional features.
Other Manuals About the Notebook Computer The following documents provide additional infor mation about the T ravelMate 5000 Series Computers: • TravelMate 5000 Series Notebook Computers Quick Start Manual, TI P/N 9786164-0001 - provides the basic information needed for first-time users to configure and begin using the notebook.
1 General Description 1.1 Introduction This manual contains field and factory level servicing information for the T ravelMate 5000 Series of Notebook Computers (Figure 1-1), manufactured by Texas Instruments, Incorporated.
TM5000 P en tiu m Note bo ok Pent ium No teboo k Do cked t o EZ -Dock Plus Po rt Re plic ator Figure 1-1 TravelMate 5000 Series Notebook Computers 1-2 General Description.
1.2 Product Overview The T ravelMate 5000 Series Notebook Computers are high per formance, multimedia notebooks powered by the Intel P54-C Pentium tm superscalar processor with built-in co-processor and dual, on-chip, 16KB data and instruction caches.
All members of the TM5000 family come standard with 8MB of 70-ns page-interleaved, DRAM on the main board (expandable to 32MB with user -installable RAM Expansion Boards based on 16M DRAM technology). The Basic Input Output System (BIOS) fir mware for the main system and for the VGA BIOS is stored on a 256K x 8 Flash reprogrammable Flash ROM.
Co ver Latch, Le ft Cove r Latch, Right Exte rn al PS/2 Mo u se or Exte rnal PS/2 Ke ypad Optio n Pe n tiu m P54- C Pr oce s s or (Internal) Two PC M CI A Op t i on Sl ot s 1.
1.2.2 Dual Intelligent Battery Packs The TM5000 notebook series support the use of two hot plugable intelligent battery packs (with front panel charge remaining indicators) that allow for battery removal and replacement while the system is operational (as long as one battery contains a partial charge).
1.2.3 Standard Peripherals As standard features, the TM5000 notebooks include a built-in 3.5 " Floppy Drive and a user -replaceable, Hard Disk Drive. (Initially, either 810 Million Byte drive or 524 million Byte Drive). The hard drive uses the Fast IDE inter face (with a 128 KB buffer) and has an average access time of 12 milliseconds or less.
1.2.4 Preloaded Softwar e All members of the TM5000 family are preloaded with the following system software: • DOS v6.2 Operating System (or later version) • Windows for Workgroups v3.
1.2.5 Preloaded Online Documentation The TM5000 Series Notebooks are also factory-loaded with the following online manuals: • TravelMate 5000 Series Notebook User’s Guide Super Shutdown Pass word .
• TravelMate 5000 Series Notebook Computers Online User’s Reference Manual, TI P/N 9786167-0001- provides more comprehensive application loading and configuration instructions for the TM5000 Series Notebook Computers.
User -Repla ceable Har d Driv e ( Unit i nit ially equi pped wit h 810 Dr ive ) PS/2 Port (Ex ternal PS/2 Keyboard or Mou se; or 101 -Ty pe Ke yboard with adapter) RAM Expan sion Cap ab ilities (User .
As new versions of BIOS become available, they can be downloaded into Flash ROM from floppy disk without physically having to replace the ROMs. (See Appendix G for details.
Attache s to Ex pa nsion Bus and VGA Port on th e Rear of the TM5000 Series No tebook SCS I Port RS- 2 32 Se ria l Po rt Bi- Dire c t io nal Par a lle l Po r t Exter nal VG A Mo ni t or Por t MIDI/Gam.
1.2.6.2 EZ-Dock Port Replicator The EZ-Dock Port Replicator includes the multi-port adapter features of EZ-Dock Plus (serial, parallel, exter nal keyboard, external mouse, exter nal VGA monitor connectors) but does not include the additional features (PCMCIA, SCSI and multi-media support features).
As shown in Figure 1-2, the Pentium version of the TM5000 Notebook also contains a higher per formance hard disk subsystem. The IDE hard disk drive is inter faced to the VL local bus and achieves I/O operations in the 11 million to 14 million operations per second.
1.3.3 Hard Disk Subsystem The TM5000 Notebook family features a user -replaceable, 2.5 inch, (initially either 810 million byte or 524 million byte capacity) enhanced IDE inter face Hard Disk Drive. Both drives have a 128KB buffer and can transfer data in or out of the buf fer at a 4.
• Special Keys for the following: • Setup Menu ( Fn-ESC ) • Standby Mode ( Fn-F4 ) • Scroll Lock Mode ( Fn-F6 ) • Num Lock Mode ( Fn-F7 ) • Real-T ime Sound V olume Adjustment ( CTRL-ALT-U.
1.3.6 Video Display Subsystem The initial of fering of the TM5000 Series Notebook Family contains a built-in TSTN (T riple Super Twist Nematic) active matrix color LCD with CCFT (Cold Cathode Fluorescent Tube). The LCD has a VGA compatible resolution of 640 by 480 pixels.
1.3.8 Exter nal Ports The TM5000 Notebook contains extern al connectors on the left, right and rear of the notebook as shown in Figure 1-11. Sound, power and external keyboard connectors are located o.
1.3.8.1 Bi-Directional Parallel Port The TM5000 notebooks include a 25-pin Parallel Printer Port with EPP/ECP bi-directional modes. The parallel port is implemented using a standard 25-pin, female, D-subminiature connector .
1.3.8.6 PCI Expansion Bus Inter face The TM5000 Notebook is equipped with a 160-pin PCI expansion bus that includes the PCI bus, VESA V ideo Feature interface, MIDI inter face, Power Control and Plug N Play inter faces.
• 8 MB Shuttle Memory Option Kit (TI Part No. 9798816-0003) - This Kit installs on one of the other RAM Module optio ns (expands RAM to 32MB if installed on 16MB RAM Option boards) These RAM expansion kits are user -installed as detailed in Section 2.
1.4.6 Notebook Carrying Case Options The following carrying cases are available for the TM5000 Notebook Computer: • Leather Portfolio (TI P/N 2567028-0001) - carries only the notebook • Deluxe Carrying Case (TI P/N 2568069-0001) - carries the notebook and smaller accessories.
1.5.2 Diagnostics Program The TM5000 Series Notebooks are shipped with PC-Doctor , a power ful diagnostics tool that deter mines the hardware configuration of a local or remote system, benchmarks the .
T able 1-1. T ravelMate 5000 Series Notebook Domestic/International Configurations (continued) Configuration Dash No. Ger man Configuration -0003 French Configuration -0004 Spanish Configuration -0005.
1.7 Notebook Physical Description The T ravelMate 5000 Series Notebooks are modular in design and can be disassembled for maintenance purposes using a set of TORX TM head, Phillips head, and straight slot screwd rivers as described in Section 5 of this manual.
1.7.1 Cover-Display Assembly The Cover -Display Assembly contains the LCD screen, power inverter circuits, and associated control circuitry. The assembly, shown in Figure 1-14, contains four major com.
1.7.2 System Base Assembly As shown in Figure 1-15, the System Base Assembly houses a variety of field-replaceable subassemblies and components including: • Main Board Assembly • PCMCIA/Sound Boar.
1.8 Notebook Functional Overview The T ravelMate 5000 Series Notebooks consist of eight major functions or sections including: • System Processor- implemented on Main Board • Memory Subsystem- imp.
Figure 1-16 TM5000 Series, Functional Block Diagram 1-30 General Description.
1.8.1 System Processor The System Processor function for the notebook is implemented on the Main Board using an Intel Pentium P54-C Superscalar Processor Chip. The processor operates in conjunction with RAM and ROM Memory and other control logic (E.G.
1.8.3 I/O Subsystem The I/O ASIC on the Main Board and an SMC 37C665 GT Combo I/O Controller Chip control all "AT"-type I/O peripherals. Two cascaded DMA controllers and two cascaded interrupt processors on the I/O ASIC support transfers between memory and the 8-bit and 16-bit peripherals (via the Combo Controller).
addition to power ful multi-media capabilities, the video controller offers full hardware and BIOS compatibility with the IBM VGA standard. 1.8.6 Exter nal VGA Capability All members of the TM5000 not.
1.8.8 Pointing Device Subsystem The pointing device subsystem (Figure 1-17) consists of the built-in "Point" device on the keyboard and a pre-programmed 82c752 micro-controller that inter faces the mouse device to the main board. An exter nal PS/2 port also supports the use of an exter nal PS/2 compatible mouse.
• Integrated numeric keypad • "Inverted T" Cursor Control K ey Layout • Special Keys for the following: • Setup Menu (Fn-ESC) • Standby Mode (Fn-F4) • Real-T ime Sound V olume Ad.
1.8.9.1 LED Displays As shown in Figure 1-19, the T ravelMate 5000 Series N otebook Computers contain a set of three LED displays just above the keyboard including: • Caps Lock indicator. This LED indicates that the keyboard is locked in the uppercase mode.
1.8.10 Hard Disk Subsystem The Hard Disk Subsystem, implemented on the Main Board and on the associated hard disk drive module, provides disk storage for all system software and user files. Depending on the model, the notebook is equipped with an 810 million byte, 1/2" hard drive or other high capacity drive.
c Caution: Format ting the disk drive erases any data that ma y be stored on the disk. Therefore do not attempt a format of the hard disk unless the computer self-test and diagnostics confirm that the disk has not been formatted. A Hard Drive activity LED is located along the front edge o f the notebook (See Figure 1-19).
1.8.12.1 AC Power Adapter The computer is equipped with a universal AC power adapter that converts AC voltage (100 to 240 V AC, 50 to 60 Hz) into DC voltage used to operate the notebook and charge the batteries.
The outputs of the Power Supply Section include: • +3 VDC at 3 Amps • +5 VDC at 5 Amps • +12 VDC at 60 Milliamps (Flash memory) 1.8.12.5 Inverter Board Assembly The Inverter Board Assembly, loca.
1.9 T ravelMate 5000 Series Notebook Specifications Specifications for the T ravelMate 5000 Series Notebooks are provided in Table 1-2. Table 1-2 TravelMate 5000 Series Notebook Specifications Functional Characteristics Characteristics Specification Processor Pentium Model Intel P54-C, 75 MHz clock rate; 3.
T able 1-2 T ravelMate 5000 Series Notebook Specifications (continued) External Inter faces Characteristics Specification Serial Port Connector Type: T ransmission Type: Bits per second: Line control:.
T able 1-2 T ravelMate 5000 Series Notebook Specifications (continued) Physical Characteristics Width:, Depth: Height: W eight: 11 inches (27.9 cm) 8.5 inches (21.
2 Installation 2.1 Introduction This section contains unpacking and preparation for use instructions for the TM5000 Series Notebook Computers. This includes: • Removing the computer and all manuals, options and accessories from the shipping container(s) (Paragraph 2.
Software License agreement Battery Pack Filler End Caps TM5000 Notebook Computer TM5000 Handle Overpack Box TM5000 Pack Box Figure 2-1 TM5000 Series Notebook Packaging Diagram 2-2 Installation.
2.3 Installing Inter nal Notebook Options If you have no inter nal options to install at this time, skip to Paragraph 2.4. Otherwise, continue with Paragraph 2.3.1. 2.3.1 Installing RAM Expansion (Optional) n Note: If not installing RAM Expansion option at this time, skip to the next paragraph.
The installation process consists of the following steps: c Caution: The RAM module option contains components that are sensi- tive to static electricity . When handling the module and the internal parts of the computer , protect against static electricity by using wrist or ankle grounding straps and grounded working mats.
Remo ve Front Beze l Bel ow Fl oppy Dri ve (Rem ov e two Sc rews fr om Bot tom) STEP 1: STEP 2: If installing Shuttle RAM, Insert Shuttle RAM Module onto RAM Expansion Modu l e. Insert RAM Expan sion Module into Main Board and replace the Fr ont B ezel (See Abov e).
2.3.2 Installing PCMCIA Options The Notebook has two connector slots for PCMC IA option cards. These two slots can be used to install one type III or two type I/II credit card size PCMCIA option cards. Install the PCMCIA op tions as follows: 1. Review the installation instructions supplied with the PCMCIA option card(s).
2.4 Installing Exter nal Notebook Options 2.4.1 Installing the Optional Numeric Keypad An optional numeric keyboard can be attached to the notebook via the keyboard connector as shown in Figure 2-5.
2.4.2 Installing Exter nal Mic and Headphone Kit Option Figure 2-6 shows the recommended installation of the Exter nal Microphone and Headset Kit onto the notebook. n Note: Before installing external microphone and headphones, tur n of f power to the notebook.
2.4.3 Installing the EZ-Dock /EZ-Dock Plus Port Replicator (Option) n Note: Skip this paragraph if not installing a p ort replicator option at this time. The optional Port Replicator is installed as fo llows: 1. Remove the port replicator and any accessories from its shipping carton .
Adapte r Connecti ons for a Docked Notebook Figure 2-8 Installing the EZ-Dock Port Replicator/Plus Figure 2-8 Installing the EZ-Dock/EZ-Dock Plus Port Replicator 2-10 Installation.
2.5 Removing/Installing Battery Packs As shown in Figure 2-9, the TM5000 Notebook has provisions for two Lithium-Ion battery packs. Battery Pack Removal 1. If one of the two batteries contains a partial charge (at least one LED lit on the front of the battery), the remaining battery pack can be removed with the Notebook in Suspend.
2.6 Installing Desktop Devices When using a port replicator or docking system, all external devices connect to the docking system as shown in Figure 1-8. Otherwise, all exter nal devices connect to the Notebook via the connectors on the rear and sides of the notebook as shown Figure 2-10.
2.6.1 Installing an External Keyboard/Mouse/Keypad A PS/2 compatible Keyboard, mouse or an optional PS/2 Compatible numeric keypad may be installed on the Notebook via the mouse connector on the left side of the Notebook. The connector pinouts are shown in Figure 2-11.
2.6.2 Installing Exter nal Parallel Printer The Notebook is equipped with an external, bi-directional, ECC/EPP compatible, 25-pin parallel printer port.
2.6.3 Installing Exter nal Serial Port Device The notebook contains an external RS-232 serial port with a male DB-9 connector as shown in Figure 2-13. The serial ports are used to interconnect such de.
2.6.4 Installing Exter nal VGA Monitor The notebook is capable of driving both its internal LCD display and an exter nal VGA monitor (LCD only, simultaneous, or C R T only). The exter nal monitor connector pinouts and connector locations are shown in Figure 2-14.
2.6.5 Installing Exter nal Headphone/Microphones The notebook connectors used for installing a set of external headphones (or speakers) and an exter nal microphone are shown in Figure 2-15. n Note: When external devices are connected to the Audio Out and Micro- phone In connectors, the inter nal speaker and microphone are disab led.
2.6.6 Installing Devices With IR Inter face Any device with an Infrared inter face conforming to IRDA specifications may be placed adjacent to the IR connector on the notebook (two IR interfaces must face each other) as shown in Figure 2-16.
2.7 Installing the AC Power Adapter Use the following procedures to connect the AC Adapter to the system: c Caution: Use only the AC Adapter supplied with the computer; other adapters can damage the unit.
2.8 Initial System Checkout After you’ve installed all inter nal options and external cabling, you’re ready for system checkout and software configuration. To check out the system, set the power switch on the notebook to the On ( I ) position which initiates the notebook self test.
2.10 Making Backups of System Software The Notebook is preloaded with the DOS/W indows operating system software, Jazz 16 Sound Utilities, PCMCIA drivers, BatteryPro Software, and other configuration software. Supplied with your system is a diskette containing backup and restore utilities, tools and diagnostics.
3 Operating Instructions 3.1 Introduction The first two subsections describe the TM5000 Notebook operating controls and indicators. The remainder of this section contains a summary of computer operations related to notebook maintenance including how to restore system softwar e.
3.2.1 Notebook Switches and Controls The Notebook switches and controls are shown in Figure 3-1 and described in the following paragraphs. All controls (except the Connector Door Release switch on the rear of the unit) and many of the LED displays are accessible only when the notebook is in the open position.
3.2.1.2 Power/Suspend Switches The notebook contains two power/mode switches including: • Power On/Off Switch- Horizontal slide type switch that controls po wer to the unit (left most position is Off).
3.2.2.2 Rear Connector Door Release Button The Rear Connector Door Release Button, located in the center of the rear panel of the notebook as shown in Figure 3-1, is used to open the two rear panel connector doors when attaching external devices or installing the notebook onto a "Docking System" option.
• NUM (Num Lock) Indicator- This LED lights when you press the Fn-F7 (NumLk) keys to toggle on the numeric keypad lock function. When the LED is On, the embedded numeric keyboard keys generate AT-keypad characters and functions when pressed in conjunction with the Fn key.
The Low Battery indicator glows red (and the alar m sounds if enabled using the Setup Program) when the battery charge is low to war n of an impending low battery condition (approx. 1 to 10 minutes of charge remaining in battery). Both the alar m and indicator remain on until the computer shuts itself down.
3.3 Inter nal Speaker/Microphone The notebook is equipped with an internal speaker and condenser -type microphone in the locations shown in Figure 3-4. The internal microphone and speakers are disabled when using an exter nal microphone and external headset or speakers.
3.4.2 Using Sound Utilities Several sound utilities are factory installed on the hard drive including: • Pocket Recorder- Windows application for recording waveform data in 8- or 16-bit format.
• Press SUSPEND to spin down the Hard Disk Drive • Save RAM Disk to Disk (if using RAM Disk) • If using Windows, double-click on the Shutdown icon to exit all active applications as well as Wind.
3.4.7 Recharging the Battery Packs A standalone battery charger option is available to charge notebook battery packs. The battery packs may also be charged in the notebook as follows: 1. Install the battery pack in your computer (if not already installed).
3.4.11 Rebuilding the System Software In the event of a hard drive replacement or system board replacement which resulted in loss of system software, you may need to rebuilt the entire system software structure.
4 T roubleshooting Procedur es This section provides an overview of the fault isolation process, provides guidelines for isolating computer malfunctions to replaceable subassemblies and provides instructions for executing diagnostics and interpreting error messages.
The detailed block diagram, shown in Figure 4-2, is useful in per forming fault analysis of various inter nal subsystems. For example, a sound hardware problem can be traced to either the PCMCIA/Sound Board, the main board, or the interconnecting cabling software.
Figure 4-2 Notebook Detailed Block Diagram Troubleshooting Procedures 4-3.
4.2 T roubleshooting Procedur es The built-in self test program and the disk resident diagnostics program (PC-Doctor) are useful tools in computer troubleshooting. However , if the computer has a power , keyboard or display problem, you first solve this problem before running diagnostics.
• Notebook Set for External Monitor- use VGA or WinMo de Utility command to reset notebook. • LCD - Replace the cover-display assembly as described in Section 5 of this manual.
T able 4-1 Self-Test Error Messages Diskette drive 0 failure This message indicates the inter nal floppy diskette (drive A) has failed. Press CTRL-ALT-ESC to ensure that drive type is correctly set (3.5 inch, 1.44MB). Run the Diagnostics to check drive A as described in Paragraph 4.
If the self-test still fails, execute the diagnostics as described in paragraph 4.2.5. No boot device available - press F1 to retry boot This message indicates the system disk, the diskette drive, or the diskette is defective (if loading MS-DOS from diskette) or that the NVRAM is not correctly configured for the installed disk drive type.
4.2.3.2 Self T est Beep Error Messages In the event of a hardware problem that affects the display, the Notebook also communicates errors via a series of beeps. These codes may be heard over the system’s speaker as three bursts of beeps. The interpretation of the beep codes is provided in Table 4-2.
T able 4-2 Self-Test Beep Codes (continued) Beep Code Port 80h Description 2-3-3 1Ah Bit A, 1ST 64K RAM Failure 2-3-4 1Bh Bit B, 1ST 64K RAM Failure 2-4-1 1Ch Bit C, 1ST 64K RAM Failure 2-4-2 1Dh Bit .
4.2.4 PCMCIA Modem Problems If an optional PCMCIA modem does not work properly, check the following items: • Proper installation of any PCMCIA options (r un Phoenix PCMCIA PhoenixCARD Manager install program). • Dialing problem or wrong number - Try dialing a number that you have previously dialed successfully.
Functionally, PC-Doctor includes the following: • Group of nine non-Interactive diagnostic tests that perform a non-destructive test of the major hardware functions in the notebook (Processor, Memory, System board, video section, serial and parallel ports (when loopback adapters are installed), hard disk and floppy disk.
Interactive T ests The PC-Doctor diagnostic test includes a suite of seven Interactive tests that require operator input during the course of the test. The Interactive T ests category includes: • Keyboard - tests the keyboard keys, LEDs and repeat function • Vid eo -tests the LCD and external VGA charac ter sets, and colors.
4.2.5.1 User Interface to PC-Doctor PC-Doctor is structured as a text-mode, windowed user interface with pull-down menus. Program operation requires the use of the following keys: • Cursor Keys- mov.
4.2.5.3 Running PC-Doctor PC-Doctor is a DOS-resident program that can be run from either hard disk or from the bootable diskette you previously created. 1 .F r o m t h e C: prompt, type: PCDR and press En ter 2 . The Diagnostics Program loads into system memory, and the LCD displays the diagnostics Header .
5 Field Service 5.1 Introduction This section contains preventive and corrective maintenance procedures for the T ravelMate 5000 Series Notebook Computers. The first part of the section describes the computer cleaning procedures and preferred handling procedures for sensitive components (e.
5.2.3 Handling the Computer Battery Packs The battery packs fur nished with the computer require reasonable care and handling to ensure efficient operation and maximum life. Periodically inspect the battery ter minals and the batteries for evidence of corrosion and oxide build-up; clean if necessary.
c Caution: All boards, options and peripherals contain components that are sensitive to stati c electricity . When handling any of these items, pro- tect against static electricity by using wrist or ankle grounding straps and grounded working mats. When moving or storing items, use the anti-static bags supplied with the items.
5.4.1 Cover-Display Assembly As shown in Figure 5-2, the Cover -Display Assembly contains the LCD screen, Power Inverter Board, Display Adapter Board, Microphone, and four cable assemblies (Inverter Cable Assembly, TFT Display cable assembly, and two DAB to Base Cable Assemblies (Left).
Table 5-1 Co ver Display Assembly, Field Replaceable Units (FRUs) FRU Description TI Part No. Removal/Replacement Paragraph No. TM5557, Pentium-Based Color LCD, 810 Drive, P/N 9798843 10.
5.4.2 System Base Assembly As shown in Figure 5-3, the System Base Assembly houses a variety of field-replaceable subassemblies an d components. The various assemblies, associated TI part numbers and paragraphs numbers containing removal/replacement procedures are listed in Table 5-2.
T a ble 5-2 Base Assembly, Field Replaceable Units (FRUs) FRU Description TI Part No. Removal/Replacement Paragraph No. TM5557, Pentium-Based Color LCD, 810 Drive, P/N 9798843 Keyboard Assembly 9791004-00XX 5.5.3 Hard Disk Drive, 810 9786285-8001 5.5.
T able 5-3 Notebook CRUs (Customer Replaceable Units) CRU Description TI Part No. Removal/Replacement Paragraph No. All TM5000 Models Battery Pack Kit, LI-ON 9786217-0001 5.5.1 PCMCIA Options (See Section 1) 5.5.2 AC Power Adapter 9786094-0001 Section 2 8 MB RAM Expansion Kit 9798816-0001 5.
5.5 Notebook Sub-Assembly Removal and Replacement Procedures The following paragraphs contain field service-level removal/replacement procedures for the Notebook. 5.5.1 Removing/Replacing the Notebook Battery Pack The procedure for removing and replacing the battery pack(s) is as follows: 1.
5.5.2 Removing/Replacing PCMCIA Options The procedure for removing and replacing the PCMCIA options is as follows: 1. Tur n off the computer . 2. Press the associated PCM CIA Eject button (left button ejects the top PCMCIA device, right button ejects the bottom device (see Figure 5-5).
4. Repeat this procedure until the top edge of the keyboard is free. 5. T ilt the top edge of the keyboard toward you to gain access to the two keyboard cable connectors underneath the keyboard. 6. Note that the wide keyboard connector attaches to the Main Board using a ZIF (zero insertion force ) type connector .
5.5.4 Removing/Replacing the Hard Drive Assembly The procedure for removing and replacing the Hard Drive assembly is as follows: 1. Power down the notebook, remove the battery packs, and disconnect the AC Adapter , if installed.
5.5.5 Removing/Replacing Expansion RAM Boards To remove and replace the expansion RAM board(s),per for m the following procedure: 1. Power down the notebook, remove the battery packs, and disc onnect the AC Adapter , if installed.
5.5.6 Opening/Replacing the Base Cover Assembly The Top Cover Assembly protects all inter nal components housed in the base assembly (Boards, Floppy Drive, Speaker , etc.
Tamper Evident Label; Remove lab el t o access screw (La bel must be re place d after servicing unit) Remove four recess ed Tor x Scre ws fro m Botto m of U nit Figure 5-9 Opening the Base Cover Field.
5.5.7 Removing/Replacing the Keyscan Board To remove and replace the Keyscan Board, perfor m the following procedure: 1. Open up the base assembly as described in the previous paragraph. 2. Gently lift the floppy drive cable up and backwards to gain access to the Keyscan Board.
5.5.8 Removing/Replacing the IR Board To remove and replace the IR Board, per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Remove the IR lens by bowing gently to the middle and removing lens.
5.5.9 Removing/Replacing the Floppy Drive To remove and replace the Floppy Drive, reference Figure 5-12 and per for m the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Remove the Keyscan Board as described in Paragraph 5.
5.5.10 Removing/Replacing the LED Board To remove and replace the LED Board Assembly, reference Figure 5-13 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2. Unplug the cable connector from J11 on the Sound/PCMCIA B oard.
5.5.11 Removing/Replacing the Sleep Switch Board To remove and replace the Sleep Switch Board Assembly, reference Figure 5-14 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). 2.
5.5.12 Removing/Replacing the Sound/PCMCIA Board To remove and replace the Sound/PCMCIA Board, reference Figure 5-15 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.5.6). Remove any installed PCMCIA optio ns (Paragraph 5.
5.5.13 Removing/Replacing the Main Board To remove and replace the Main Board Assembly, reference Figure 5-16 and per form the following procedure: 1. Open up the base assembly as described in the previous paragraph (Paragraph 5.
1 Ground ing st rap goes u nder right most scr ew holdi ng DAB Board to Cov er Assembly. Shown wi th Di spl ay Bez el Remo ved Remov e LCD Be zel; di sc onnect groundi ng str ap from Main B oar d to DA B B oard.
5.5.14 Removing/Replacing the Display Bezel To remove the Display Bezel (to gain access to Cover -Display FRU’s), refer to Figure 5-17 and per form the following procedure: 1. Turn of f the computer and disconnect the ac power adapter (if it is attached).
5.5.15 Removing and Replacing the DAB Board To remove the DAB Board, refer to Figure 5-18 and per form the foll owing procedure: 1. Tur n off the computer , remove the battery packs and disconnect the ac power adapter (if it is attached). 2. Remove the Display Bezel as described in paragraph 5.
5.5.16 Removing and Replacing the LCD Cover Assembly To remove the LCD Cover Assembly with LCD Panel, Microphone, DAB, Inverter Board, Cover Plastics and V ideo Driver Board components , refer to Figure 5-19 and use the following procedure: 1. Tur n off the computer , remove the battery packs and disconnect the ac power adapter (if it is attached).
5. Install the replacement LCD Cover Assembly onto the base of the notebook and secure using the hinge screws. Reconnect the two video cables under the DAB Board and secure the DAB insulator to the top of the board. 6. Install the original LCD bezel .
5.6 Removing/Replacing the Inverter Board To remove/replace the Inverter Board (Figure 5-20), use the following the procedure; 1. Remove the Display Bezel as described in Paragraph 5.5.14. c Caution: Ensure that the AC Adapter is disconnected from the note- book and both batteries removed.
Sc rews Hol din g I nv ert er Boar d to C over R emoving/Repl acing Inverte r Bo ard Step 1: Re move two Snap On Plastic Hinge Covers Step 2: Remove two plugs a nd remove r ecessed screws.
6 Illustrated Parts Listing 6.1 Introduction This section contains an illustrated parts listing for the TM5000 Pentium, 75MHz, 10.4 inch Active Matrix Color , 8MB Memory, 810 Drive, TI P/N 9798842.
6.2 TM5000 Pentium, 10.4 TFT 810HD, Domestic Notebook with Pack, P/N 9798842-0001 Figure 6-1 and Table 6-2 contain an illustration and parts listing for the TM5000 Pentium 10.4 inch TFT , 810 Drive, TI Part No. 9798842-0001 (Domestic version only shown for clarity).
Table 6-2 TM5000 Pentium, 10.4 TFT , 810HD, Domestic Notebook with Pack, P/N 9798842-0001 P AR T NO: 9798842-0001TM MDL 5557, 810HD, 10.4TFT , W/P ACK, DOM REV : B/B Item TI Part No. Quantity Description 01 9798842-0100 1 COMMON PAR TS FOR 9798842-XXXX 02 9798843-0001 1 UNIT ASSY ,MDL 5557,810HD,10.
6.2.1 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing A breakout of the parts listing for the unit level assembly for the TM5000 Pentium, 10.4 inch TFT , 810 Drive is shown in Figure 6-2. The associated parts listing is provided in Table 6-3.
Figure 6-2 Figure 6-2 TM5000, 10.4 TFT Color, 810HD, Domestic Unit Assembly, P/N 9798843 (Sheet 2 of 2) Illustrated Parts Listing 6-5.
T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing P AR T NO: 9798843-0001 UNIT ASSY , MDL 5557, 81 0HD, 10.4 TFT , DOM REV : J/ M Item TI Part No. Quantity Description 01 9798843-0100 1 COMMON PAR TS FOR 9798843-XXXX 02 9786285-0101 1 HDD,2.
T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing (continued) Item TI Part No. Quantity Description 103 9786147-0001 1 BUTTON,LCD,CONTRAST,BRIGHTNESS,TM5000.
T able 6-3 TM5000, 10.4 TFT Color , 810HD, Domestic Unit Assembly, P/N 9798843, Parts Listing (continued) Item TI Part No. Quantity Description 141 2248407-1307 2 SCREW,SLOT -TORX,PLASTITE,PAN,2-28 X .188 142 2248407-0073 3 SCREW,TORX,MACHINE,2-56 X .
6.2.2 10.4 Inch TFT Cover Display Assembly The 10.4 Inch Color TFT Cover Display Assembly, TI Part No. 9786250-0003/8003, is shown in Figure 6-3. The associated parts listing is provided in Table 6-4.
Table 6-4 10.4 Inch Co lor TFT Cover Display Assembly, P/N 9786250-0003, Parts Listing PAR T N O: 9786250-0003 LCD ASSY ,10.4" TFT SHARP ,TM5000 S ERIES REV: M/ R Item TI Part No.
6.3 Assessory Kit Parts Listing for TM5000 Series Notebooks. A breakout of the parts associated with the Assessory Kit for the TM5000 Series Notebooks is provided in Table 6-5.
6.4 Board Level Illustrated Parts Listings The remainder of this section contains board-level illustrated parts listings that are common to various product models (see unit level breakout for a particular model; reference the inter nal PWB part numbers and refer to paragraph 6.
Figure 6-4 Main Board (P54, 75MHz), P/N 9798803-0001 Figure 6-4 Main Board (P54, 75MHz) P/N 9798803-0001 (Sheet 1 of 2) Illustrated Parts Listing 6-13.
Figure 6-4 Main Board (P54, 75MHz) P/N 9798803-0001 (Sheet 2 of 2) 6-14 Illustrated Parts Listing.
T a ble 6-6 Main Boar d (P54, 75MHz), P/N 9798803-0001, Parts Listing P AR T NO: 9798803-0001PWB AS SY ,MAIN BOAR D, TM5000P REV : R/AA Item TI Part No.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 141 9786236-0001 1 INDUCTOR,13UH,5 AMP ,TM5000 SERIES L201 142 2248749-0010 1 CAP ,AL ELECT,OR.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description Note: The following is a breakout of the tab parts associated with item 191. PAR T N O: 9798803-6001 TAB PAR TS FOR 9798803-0001 REV: R/AA Item TI Part No.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 66 2563196-0003 4 IC,74LVT16245,16-B BUS XCVR,S-R,PL TSSOP U61 U62 U63 U64 67 2563197-0003 2 I.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description Note: The following is a breakout of the topside parts associ ated with item 003 above. P ART NO: 9798803-3001 TOPSIDE P ARTS FOR 9798803-0001 REV : R/AA Item TI Part No.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 63 2248889-0015 1 CR YSTAL,MINIATURE,24.000 MHZ,CERAMIC,SMT Y15 64 2248657-0002 1 XTAL,QUAR TZ,32.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 83 2248731-0001 1 CAP ,TANT CHIP ,4.7 UF ,20%,10V ,1206 PKG C1810 84 2248872-0013 2 CAP ,CER C.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 92 2248863-0009 48 RES,CHIP ,22 OHM,5%,.063W,0603 PKG R500 R501 R502 R503 R504 R505 R506 R507 .
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 106 2248654-0005 4 FERRITE CHIP ,WIDE BAND,400 OHMS @ 100MHZ FB171 FB172 FB173 FB174 107 22484.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 144 2248834-0001 1 CAP ,TANT CHIP ,CNFRML,100UF,20%,15V ,H-PKG C208 145 2248252-0067 2 TANTALUM CHIP CAPACITOR,10UF+/-20% ,16VDC C2001 C195 147 2248813-0025 2 RES,CHIP ,.
T a ble 6-6 Main Board, P/N 9798803-0001, Parts Listing (continued) Item TI Part No. Quantity Description 181 2248872-0053 1 CAP ,CER CHIP ,.022 UF ,+80/-20%,25V,Z5U,06 C202 183 2248872-0045 3 CAP ,CER CHIP ,4700 PF ,10%,50V,X7R,0603 PK C197 C198 C2003 185 2248863-0121 1 RES,CHIP ,1 M OHM,5%,.
Figure 6-5 Figure 6-5 PCMCIA/Sound Board, P/N 9786205-0001 (Sheet 1 of 2) 6-26 Illustrated Parts Listing.
Figure 6-6 Figure 6-5 PCMCIA/Sound Board, P/N 9786205-0001 (Sheet 2 of 2) Illustrated Parts Listing 6-27.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing P AR T NO: 9786205-0001 PWB ASSY , PCMCIA/SOUND BOAR D, TM4100 REV : K/L Item TI Part No. Quantity Description 02 9786207-0001 REF LOGIC,PCMCIA/SOUND BOARD,TM5000 03 2363830-0008 .0030 LABEL,SYMBOLIZATION (.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 54 2563212-0001 1 IC,AD720,RGB TO NTSC ENCODER,PLCC U29 55 9798685-0003 1 CM,IC,74HC157,.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description C20 C21 80 2248600-0037 2 CAP ,CER CHIP ,1000 PF ,10%,50V,COG,805 PKG C13 C37 83 2248600.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 117 2248846-0178 3 RES,CHIP ,698 OHM,1%,.10W,0805 PKG R102 R103 R104 118 2248523-0085 3 RES,CHIP ,75.0 OHM,1%,.25W,1210 PKG R105 R106 R107 119 2248846-0385 1 RES ,CHIP ,100 K OHM,1% ,.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 39 2563157-0001 1 IC,YMF262,FM SOUND S OURCE,PLASTIC SOIC U13 40 2563158-0001 1 IC,Y AC5.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 62 2248808-0005 1 COIL,ELECT,22UH,.68A,4.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 79 2248600-0025 2 CAP ,CER CHIP ,100PF ,10%,50V,COG,0805 PKG C4 C7 80 2248600-0037 1 CAP ,CER CHIP ,1000 PF ,10%,50V,COG,805 PKG C38 81 2248252-0044 1 TANTALUM CHIP CAP ,1.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 99 2248601-0080 2 CHIP RES,20 K OHM,.1 W,5%,0805 PKG R130 R131 100 2248601-0033 1 CHIP RESISTOR,220 OHM,.1W,5%,0805 PKG R115 101 2248601-0081 1 CHIP RESISTOR,22K OHM,.
Table 6-7 PCMCIA/Sound Board, P/N 9786205-0001, Parts Listing (continued) Item TI Part No. Quantity Description 123 2248601-0097 8 CHIP RESISTOR,100K OHM,.
Figure 6-7 Keyscan Board, P/N 9786209-0001 Illustrated Parts Listing 6-37.
T a ble 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing P AR T NO:9786209-0001 PWB AS SY ,KEYSCAN BD (II),TM410 0 REV : H/ J Item TI Part No. Quantity Description 01 9786211-0001 REF LOGIC,KEYSCAN .
T able 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing (continued) Item TI Part No. Quantity Description 46 2248872-0019 2 CAP ,CER CHIP ,33 PF ,10%,100V,COG,0603 PKG C17 C18 47 2248872-0061 8 CAP ,CER CHIP ,.
T able 6-8 Keyscan Board, P/N 9786209-0001, Parts Listing (continued) Note: The following is a breakout of the topside parts associated with item 3 abov e. P AR T NO: 9786209-3001 TOPSIDE SMT PARTS FOR 9786209-0001 REV: H/ J Item TI Part No. Quantity Description 02 9786210-0001 1 PWB,KEYSCAN B D (II),TM5000 29 2248912-0001 1 CONN ECTOR,FFC,5-PIN,1.
T able 6-9 IR Board, P/N 9798813-0001, Parts Listing P AR T NO: 9798813-0001 PWB ASS Y , UNIVER IR TRANSCEIVER, TM5000 REV : A/ C Item TI Part No. Quantity Description 01 9798815-0001 REF LOGIC,UNIVER.
T able 6-9 IR Board, P/N 9798813-0001, Parts Listing (continued) Note: The following is a breakout of the backside parts assoc iated with item 19 above.
T able 6-10 Sleep Board, P/N 9786148-0001, Parts Listing P AR T NO: 9786148-0001 PWB AS SY , SLEEP SWITCH, LILY REV : / A Item TI Part No. Quantity Description 01 9786150-0001 REF LOGIC, SLEEP SWITCH, LILY 02 9786149-0001 1 PWB, SLEEP S WITCH, TM5000 03 2248941-0002 1 SWITCH, DETECTOR,30V, 0.
Table 6-11 LED Board, P/N 9786128-0001, Parts Listing P AR T NO: 9786128-0001 PWB ASSY , LED BOARD, LILY REV : B/ D Item TI Part No. Quantity Description 01 9786130-0001 REF LOGIC,LED BOARD,LILY 03 25.
Figure 6-11 Inverter Board, P/N 9786134-0001 Illustrated Parts Listing 6-45.
Table 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing P AR T NO:9786134-0001 PWB AS SY ,INVR TR,SHARP TFT UNI,TM5000 REV : E/E Item TI Part No. Quantity Description 02 9786136-0001 1 LOGIC,INVER TER,SHARP ,9.5/10.4TFT,TM5000 03 2248831-0001 1 CAP ,MTLZ PLYEST,N-IND,.
T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 32 2248601-0073 1 CHIP RESISTOR,10K OHM,.1W ,5%,0805 PKG R7 33 2248846-0322 1 RES,CHIP ,22.1 K OHM,1%,.10W,0805 PKG R8 34 2248846-0265 1 RES,CHIP ,5.
T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 58 2548534-0014 1 DIODE,VOL TAGE REGULATOR,BZX84,8.2V ,1% Z2 *ALT P/N 2548534-0051 (SEC) *LM ITEM 0059 *ALT P/N 2548534-0125 (SEC) *LM ITEM 0060 59 2548534-0051 0 D IODE,VOLTAGE REGULATOR,BZX84,8.
T able 6-12 Inverter PWB, P/N 9786134-0001, Parts Listing (continued) Item TI Part No. Quantity Description 20 2563148-0001 2 XS TR,MOSFET ,N-CHN,50VDS,25AID,50W,TO-252 Q12,Q14 23 2248600-0061 1 CAP ,CER CHIP ,.
Figure 6-12 DAB Board, P/N 9786273-0001 6-50 Illustrated Parts Listing.
Table 6-13 DAB Board, P/N 9786273-0001, Parts Listing P AR T NO:9786273-0001 PWB AS SY ,DAB #2 ,SHARP 10.4TFT ,TM5000 REV: F/G Item TI Part No. Quantity Description 01 9786275-0001 REF LOGIC,DAB #2,SHARP 10.4TFT ,TM5000 09 2363830-0008 .0030 LABEL,SYMBOLIZATION (.
7 Schematic Diagrams 7.1 Introduction This section contains schematic diagrams for the pinted wiring boards (PWBs) used in the T ravelMate 5000 Series of Notebook Computers. Table 7-1 contains an index to the drawings in this section. Table 7-1 Schematic Drawing Index Board Type TI Part No.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 1 of 22) 7-2 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 2 of 22) Schematic Diagrams 7-3.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 3 of 22) 7-4 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 4 of 22) Schematic Diagrams 7-5.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 5 of 22) 7-6 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 6 of 22) Schematic Diagrams 7-7.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 7 of 22) 7-8 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 8 of 22) Schematic Diagrams 7-9.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 9 of 22) 7-10 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 10 of 22) Schematic Diagrams 7-11.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 11 of 22) 7-12 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 12 of 22) Schematic Diagrams 7-13.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 13 of 22) 7-14 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 14 of 22) Schematic Diagrams 7-15.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 15 of 22) 7-16 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 16 of 22) Schematic Diagrams 7-17.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 17 of 22) 7-18 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 18 of 22) Schematic Diagrams 7-19.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 19 of 22) 7-20 Schematic Diagrams.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 20 of 22) Schematic Diagrams 7-21.
Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 21 of 22) 7-22 Schematic Diagrams.
T o Be Supplied Figure 7-1 Figure 7-1 Main Board, Part No. 9798803, Logic Diagram (Sheet 22 of 22) Schematic Diagrams 7-23.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 1 of 12) 7-24 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 2 of 12) Schematic Diagrams 7-25.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 3 of 12) 7-26 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 4 of 12) Schematic Diagrams 7-27.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 5 of 12) 7-28 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 6 of 12) Schematic Diagrams 7-29.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 7 of 12) 7-30 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 8 of 12) Schematic Diagrams 7-31.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 9 of 12) 7-32 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 10 of 12) Schematic Diagrams 7-33.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 11 of 12) 7-34 Schematic Diagrams.
Figure 7-2 Figure 7-2 PCMCIA/Sound Board, P/N 9786205, Logic Diagram (Sheet 12 of 12) Schematic Diagrams 7-35.
Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 1 of 5) 7-36 Schematic Diagrams.
Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 2 of 5) Schematic Diagrams 7-37.
Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 3 of 5) 7-38 Schematic Diagrams.
Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 4 of 5) Schematic Diagrams 7-39.
Figure 7-3 Figure 7-3 Keyscan Board, P/N 9786209, Logic Diagram (Sheet 5 of 5) 7-40 Schematic Diagrams.
Figure 7-4 Figure 7-4 Sleep Switch Board, P/N 9786148, Logic Diagram (Sheet 1 of 1) Schematic Diagrams 7-41.
Figure 7-5 Figure 7-5 IR Board, P/N 9798813, Logic Diagram (Sheet 1 of 2) 7-42 Schematic Diagrams.
Figure 7-5 Figure 7-5 IR Board, P/N 9798813, Logic Diagram (Sheet 2 of 2) Schematic Diagrams 7-43.
Figure 7-6 Figure 7-6 LED Board, P/N 9796128, Logic Diagram (Sheet 1 of 2) 7-44 Schematic Diagrams.
Figure 7-6 Figure 7-6 LED Board, P/N 9796128, Logic Diagram (Sheet 2 of 2) Schematic Diagrams 7-45.
Figure 7-7 Figure 7-7 8/16 MB RAM Exp. Board, P/N 9798816, Logic Diagram (Sheet 1 of 1) 7-46 Schematic Diagrams.
Figure 7-8 Figure 7-8 Inverter Board, P/N 9796134, Logic Diagram (Sheet 1 of 2) Schematic Diagrams 7-47.
Figure 7-8 Figure 7-8 Inverter Board, P/N 9796134, Logic Diagram (Sheet 2 of 2) 7-48 Schematic Diagrams.
Figure 7-8 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 1 of 3) Schematic Diagrams 7-49.
Figure 7-9 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 2 of 3) 7-50 Schematic Diagrams.
Figure 7-9 Figure 7-9 Display Adapter Board, P/N 9786273, Logic Diagram (Sheet 3 of 3) Schematic Diagrams 7-51.
A Character Sets A.1 Introduction The T ravelMate Computer character sets are identical to the IBM Code Pages for MS-DOS . This appendix shows the character sets for Code Page 437 (United States), 850 (Multilingual), 863 (Canadian-French), and 865 (Nordic), with the decimal and hexadecimal codes for each character .
Figure A-1 Code Page 437, United States A-2 Character Sets.
Figure A-2 Code Page 850, Multilingual Character Sets A-3.
Figure A-3 Code Page 863, Canadian-French A-4 Character Sets.
Figure A-4 Code Page 865, Nordic Character Sets A-5.
B Keyboar d Layouts B.1 Introduction This appendix contains the keyboard layouts for domestic and international models of the T ravelMate 5000 Series Notebook Computers.
Æ > < Q W E R T Y Ent er Caps Loc k A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F 1 2 N u m L k Ins Del Prt Sc SysR q Ctrl Hom e End Pg Up Pg Dn Alt Gr 0 M 7 9 8 F9 F8 F10 Set Up Esc J K L U I O P 0 Break 1 2 34 5 % 1/2 6 & 7 8 9 0 Å Shift Shi ft () 4 56 1 23 Figure B-3 Danish Keyboard Layout M Suppr Ar.
Y Ende Bild Pos 1 Strg Ein fg A U Konfig Alt G r O Q W ER T Z Ent er A SD FG H X C V B N Fn 1 2 34 56 Esc F1 F2 F3 F5 F6 F7 Pause F4 F11 F12 Entf Druck S-Ab f 4 56 U I O P 1 23 J K L 0 0 M 7 90 8 F9 F.
Q W E R T Y Ente r Caps Lock A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F 12 Nu m L k Ins Del Pr t Sc SysRq Ctrl Hom e En d P gUp PgDn Alt Gr 4 56 U I O P 12 3 J K L 0 0 M 7 9.
1 2 3 45 Å 1/2 67 8 90 Q W ER T Y Caps Loc k A SD FG H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F1 1 F12 N u m Lk Ins Del Prt Sc SysRq Ctrl Home End PgUp PgDn Alt Gr 4 56 U I O P 1 23 J K.
1 2 3 45 6 7 8 9 0 c a o Q W E R T Y Enter Caps Loc k A SD F G H X C V B N Z Fn Alt F1 F2 F3 F5 F6 F7 Pause F4 Scr Lk F11 F12 N u m L k Ins Del Prt Sc SysR q Ctrl Hom e End Pg Up Pg Dn Alt Gr 4 56 U I.
C PC-Doctor Diagnostics C.1 Introduction The TM5000 Series Notebooks are shipped with PC-Doctor , a power ful diagnostics tool that can help you deter mine the hardware configuration of a local or rem.
C.3 Keyboar d Navigation The keys shown in Table C-1 can be used to navigate through the PC-Doctor menus: T a ble C-1 PC-Doctor Key Assignments In addition, when you select All Tests from the Diagnostics menu, the Test Selection Menu that appears uses the keys listed in Table C-2: T able C-2 Test Selection Menu Special Keys C.
C.5 PC-Doctor Menus There are several selections available from the menu bar of the PC-Doctor Diagnostics main menu. These include: • ? • Diagnostics • Interactive Tests • Hardware Info • Utility • Quit C.5.1 Online Help (?) To obtain context sensitive help from any menu, press F1 .
• Pass Count - selects how many times tests are repeated. The highest limit is 9999 times. • Test Logging - opens the Log Options menu that lets you define how test results are printed or stored to a file during testing. By default, PC-Doctor produces a test result file at the end of testing if an error was detected.
C.5.4 Hardware Info Menu This menu contains functions that deter mine and report on the setup of the computer . None of these functions per for m diagnostic tests; however any errors are included in the reports. The following functions are available from the Hardware Info menu: • System Configuration - lists main system configuration data.
• Remote Operation - enables remote control if available • Tech Support Form - allows you to collect information about the current system • Battery Rundown - quickly deep-discharges the NiCad or NiMh battery of a laptop computer.
D Configuring Memory D.1 Introduction This appendix describes the various areas of RAM within the TM5000 Series Notebook Computers and how you can make the Notebooks more ef ficient by configuring them with the memory management device drivers supplied with your computer .
D.2.1 Extended Memory Extended Memory is defined as intern al system RAM above 1024 KB. MS-DOS or your applications (that support Extended Memory) can access Extended Memory if your system is configured with an Extended Memory driver (XMS).
The Expanded Memory Manager included with MS-DOS ( EMM386.EXE ) manages the inter face between the program and Expanded Memory, bringing data in and out thr ough the page frame as r e qu ir e d . Before you can use Expanded Memory, you must install the EMM386.
D.3.2 EMM386.EXE The EMS memory manager provided with your computer , EMM386.EXE, confor ms to version 4.00 of the Lotus/Intel/Microsoft Expanded Memory Specification (EMS). EMM386.EXE enables areas of system memory to be used as Expanded Memory. The EMM386.
E Scr een Standards E.1 Introduction This appendix summarizes the screen standards supported by your computer’s inter nal display adapter . The following tables display screen standard and extended modes for exter nal monitors, the LCD, and additional SIMULSCAN modes.
E.3 Extended VGA Modes T able E-2 - Exter nal Mo nitors Extended VGA Modes Hex Mode Display Mode Number of Colors Resolution Refresh Rate 11 a Graphics 2/256 640 x 480 72 11 a Graphics 2/256 640 x 480.
Table E-2 Exter nal Monitors Extended VGA Modes (cont.) Hex Mode Display Mode Number of Colors Resolution Refr e sh Rate 5D Graphics 16/256K 1024 x 768 70 5D Graphics 16/256K 1024 x 768 72 5D Graphics.
Table E-2 Exter nal Monitors Extended VGA Modes (cont.) a IBM standard VGA mode enhanced for higher vertical frequency b Mode 54 uses 1056 x 344 addressable pixels (text mode), however it uses 1056 x 350 timing.
E.4 Standard LCD Modes T able E-3 Standard VGA LCD-Only Video Modes Hex Mode Display Mode # of Gray Shades (Mono) Number of Colors Char . Per Row Char .
E.5 Extended LCD Modes T a ble E-4 Extended LCD-Only Video Modes E.6 Standard SimulSCAN Modes T a ble E-5 Standard SimulSCAN Video Modes Hex Mode Number of Colors Char . Per Row Char . Cell (pixels) Screen Resolution Vid eo Clock (MHz) 5E 256/256K 80 x 25 8 x 16 640 x 400 25 5F 256/256K 80 x 30 8 x 16 640 x 480 31.
E.7 Extended SimulScan Modes T a ble E-6 Extended SimulSCAN Video Modes a T rue-color packed-pixel mode Hex Mode Number of Colors Char . Per Row Char .
F Added Interrupt 15 Functions F .1 Introduction This section describes the interrupt 15h functions that have been added to the TM5000 BIOS. Only added functions are described in this specification. All standard BIOS calls are described in the PhoenixBIOS Customer Docu- mentation manual.
AL = Power Conservation Configuration 76543210 Power Source (0 = Internal, 1 = Exter nal) Battery State (00 = Good, 01 = Low State 1, 10 = Reserved, 11 = Low State 2) Power Conservation Mode (0 0 = Au.
Returns: AH = Error Code 00h = No Error 01h = Invalid Parameter 02h = No Modem BL = System inactivity timeout (in minutes) CL = Video inactivity timeout (in minutes) DH = Modem State 00h = Tur ned modem Off 01h = Tur ned modem On FFh = Didn’t modify state DL = Fixed Disk inactivity timeout (in minutes) CY = Set on Error (see AH) F .
Parameter BL V alue Battery Count BH = 00h Only legal value for this model is 1 Battery Level (0%) BH = 01h 0 = empty, 100 = full, increment by 1 Low Battery W ar ning T ime (min) BH = 02h 0 - 15, inc.
Returns: AH = 00h AL = Current CPU Speed 00h = Low 01h = High 02h = Medium BL = Current Auto Setting 00h = Of f. 01h = On F .6 Function F8h - Set CPU Speed This function sets the CPU speed to low, medium, or high.
Call with: AH = F9h AL = 5Eh Returns: AH = Error Code 00h = No Error 86h = Invalid Parameter AL = Reserved BH = Model Type 76543210 System Type 000 = Reserved 001 = Laptop 010 = Notebook 011 - 111 = R.
76543210 Reserved LCD Type 0000 = Mono 0001 = Passive Color 0010 = Active Color 0011 = EL 0100 - 1111 = Res erved DL = Reserved CY = Set on error (see AH) F .8 Function F9h - Subfunction 60h Get Standby Level This function retur ns the current standby level, and the maximum level currently supported.
Returns: AH =Error Code 00h = No Error 86h = Invalid Parameter F .10 Function F9h - Subfunction 63h Get Extended Model ID This function retur ns a variety of information about the system, including the model ID and installed devices. Also, see related functions F95Eh and FA00 h.
76543210 Expansion Station (0 = Not install ed, 1 = Installed) SCSI Option (0 = Not install ed, 1 = Installed) External Keyboard (0 = Not installed, 1 = Installed) Numeric Keypad (Always retur ns 1) B.
Call with: AH = FA h AL = 03h BH = Request Parameter 00h = Reverse 01h = Expanded Mode 02h = Block Cursor 03h = Display 04h = Monitor Type 05h = LCD Power 06h = Backlight 07h = Text Resolution 08h = C.
Parameter B L V alue Reverse BH = 00h 00h = On 01h = Graphics 02h = Text 03h = Off FFh = Not Supported Expanded Mode BH = 01h 00h = Of f 01h = On FFh = Not Supported Block Cursor BH = 02h 00h = Of f 0.
F .13 Function F Ah - Subfunction 05h Get Setup Infor mation Retur ns the state of various setup features. Also, see related function FA03 h. Call with: AH = FA h AL = 05h BH = Request Parameter 00h =.
BL = Setup Parameter Parameter BL V alue Expansion B us BH = 00h 00h = Standard 01h = Enhanced 02h = Auto System T imeout Interval BH = 01h 00h = Always On 01h = 1 Minute 02h = 2 Minutes 03h = 5 Minut.
BL = Setup Parameter (cont.) Parameter BL V alue Speaker BH = 0Fh 00h = Off 01h = On Activity Monitor BH = 10h 76543210 Monitore d if set Keyboard T ravelPoi nt Disk Acces s Comm Ports Reserved Proces.
BL = Setup Parameter (cont.) Parameter BL V alue Standard Comm Control Lines BH = 13h 7 6543210 DCD 0 = Normal 1 = Force On DSR 0 = Normal 1 = Force On CTS 0 = Normal 1 = Force On Reserved Option Comm.
BL = Setup Parameter (cont.) Parameter BL V alue Shadow BIOS Info BH = 16h 76543210 Shadow Video BIOS 0 = No 1 = Y es Shadow System BIOS 0 = No 1 = Y es Shadow Everything 0 = No 1 = Y es Reserved Powe.
G BIOS Updates G.1 Introduction This appendix describes the procedure for rebuilding TM5000 BIOS files using floppy updates and reflashing BIOS ROM with the floppy updates. G.2 Update Procedure Use the following procedure to incorporate BIOS updates: 1.
Alphabetical Index A AC Power Adapter , 2-19 Specifications, 1-41 Accessories, 1-22 Assemblies, Customer Replaceable Units (CRUs), 5-8 Assemblies, Field Replaceable (FRUs)(Section 5) Cover -Display As.
Field Replaceable Units (FRUs),5-4, 5-5, 5-6, 5-7 Preventive Maintenance,5-1 T roubleshooting,Section 4 Field Replaceable Assemblies,Section 5 Flash ROM, 1-15 Floppy Controller , 1-30, 1-32, 1-38 Floppy Drive, 1-5,1-16, 5-18 Flowchart, T roubleshooting, 4-2 For matting a Hard Disk,See DOS/W indows Users Manual.
AC Adapter , 2-19 LED Indicators, Section 3 Power Switch, 3-2, 3-3 Power Saving Mode, 3-8 Power Switch, 3-6 Product Models, 1-1, 1-24 Productivity Software,1-6 (Also see User’s Manual) Preventive Ma.
Printed in U.S.A..
Ein wichtiger Punkt beim Kauf des Geräts Texas Instruments 9786166-0001 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Texas Instruments 9786166-0001 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Texas Instruments 9786166-0001 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Texas Instruments 9786166-0001 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Texas Instruments 9786166-0001 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Texas Instruments 9786166-0001 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Texas Instruments 9786166-0001 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Texas Instruments 9786166-0001. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Texas Instruments 9786166-0001 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
