Benutzeranleitung / Produktwartung Argent des Produzenten Telstra
Zur Seite of 28
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 1/29 ACN 051 775 556 Version 1.3.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 2/29 ACN 051 775 556 The information contained in this document was correct at the time of printing. However, in order to improve its products, Telstra reserves the right to modify the details in this document at any time and without warning.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 3/29 ACN 051 775 556 Table of Contents 1 INTRODUCTION 5 2 SCOPE 5 3 DESCRIPTION 5 3.1 Application 5 3.2 Definitions 6 3.3 Package Contents 6 3.4 Back Panel 7 3.5 Top Panel Seven Segment Display 8 3.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 4/29 ACN 051 775 556 4 V.24 SERIAL PORT ‘AT’ COMMANDS 21 4.1 Introduction 21 4.2 ‘AT’ Commands 21 4.3 S register settings 22 5 POTS TELEPHONE SUPPLEMENTARY FEATURES 23 5.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 5/29 ACN 051 775 556 1 INTRODUCTION This document is provided as a guide describing the procedures for installation, usage and maintenance of Telstra’s Argent Terminal Adaptor (ATA).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 6/29 ACN 051 775 556 3.2 Definitions The following words, acronyms and abbreviations are referred to in this document.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 7/29 ACN 051 775 556 3.4 Back Panel The ATA contains one analogue EFTPOS port (611 data phone socket), one V.24 (Serial/RS232) data port (DB25 connector), one standard analogue telephone port (RJ45 connector) and one ISDN port (RJ45 keyed connector).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 8/29 ACN 051 775 556 3.5 Top Panel Seven Segment Display The Seven-Segment display consists of lighted segments to display numbers 0-9 plus a dot. This shows the startup state of the ATA and on-going status of the EFTPOS connection.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 9/29 ACN 051 775 556 Only the decimal point on the Seven Segment Display is illuminated when the configuration has been downloaded successfully by the Argent NMS, and the ATA is functioning correctly with connected EFTPOS terminals responding normally.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 10/29 ACN 051 775 556 3.6.4 Power-up the ATA Insert the Plugpack connector into the 12VDC socket on the ATA back panel. Whilst pressing and holding the RST button at the back of the ATA, turn the 240V power on at the power point.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 11/29 ACN 051 775 556 Next, the ATA makes a new D-Channel X.25 call to the main Argent NMS, to automatically download its configuration. “Remote Management in Progress” (Display 4) will be displayed during this process.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 12/29 ACN 051 775 556 3.6.12 Observe that the ATA is ready and record the service details When the above steps have completed successfully, and the configuration is downloaded.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 13/29 ACN 051 775 556 3.6.14 Point-to-Point Protocol (PPP) Installation PPP is used to connect to Internet or other ISDN TAs using the common Windows, Unix, Macintosh interfaces.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 14/29 ACN 051 775 556 5. Click on Add 6. Tick Don’t detect my modem; I will select from list 7. Click on Next 8. Select Standard Modem Types – Standard 33600 bps Modem 9.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 15/29 ACN 051 775 556 11. Click on Finish 12. Click on Properties 13.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 16/29 ACN 051 775 556 3.6.16 Configuring Dial-Up Networking (DUN) 1. Open My Computer from your Desktop 2. Open Dial-Up Networking 3. Double click on Make New Connection 4.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 17/29 ACN 051 775 556 8. Click Next 10. Click Finish 3.6.17 V.120 Setup V.120 allows a device using a serial port to connect to another remote device using a serial port.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 18/29 ACN 051 775 556 3.7 ATA Maintenance In the case where the Argent TA fails to operate, contact your Service Provider for assistance. 3.7.1 Check the Seven Segment display Check the ATA Seven Segment Display for indication of possible fault conditions.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 19/29 ACN 051 775 556 3.7.7 Maintenance by Telstra Telstra Service Assurance contracts are available for the ATA which can cover labour and parts for maintenance activity during contracted hours (please note that some exclusions do apply eg unfair wear & tear).
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 20/29 ACN 051 775 556 3.8.4 ATA out of Warranty - with Telstra Service Assurance If an ATA, which is out of warranty, .
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 21/29 ACN 051 775 556 4 V.24 SERIAL PORT ‘AT’ COMMANDS 4.1 Introduction The Argent Terminal Adaptor (ATA) is an ISDN device with powerful features for interconnection.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 22/29 ACN 051 775 556 AT Description ATQ0 (default) Enable result codes output to the terminal. ATQ1 Disables result codes to the terminal. ATQ2 Disable result code in answer mode only.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 23/29 ACN 051 775 556 Register Description allows multiple phone numbers on an ISDN service. S59 ISDN connection status can only be read ATS59? Returns 0 for connection not synchronised to Telstra network ATS59? Returns 1 for connection ready for calls.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 24/29 ACN 051 775 556 5.1.1 Abbreviations used in the POTS feature descriptions [.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 25/29 ACN 051 775 556 5.2 Telephone Port (POTS) Features 5.2.1 Call Waiting (CW) Call Waiting is an Easycall ™ feature so the customer can detect the presence of another call, while a call is in progress.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 26/29 ACN 051 775 556 If you do not have access to a computer, you can enable CLIR on a permanent basis using the foll.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 27/29 ACN 051 775 556 5.2.5 Call Forward Call forward allows calls to be forwarded to any other telephone including mobiles either immediately, when busy or if the call is not answered.
Argent Terminal Adaptor - User Guide Version 1.1 Telstra Corporation Limited Page 28/29 ACN 051 775 556 All voice phone calls and data calls will be answered if a telephone number is not entered into the AT command registers.
Ein wichtiger Punkt beim Kauf des Geräts Telstra Argent (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Telstra Argent noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Telstra Argent - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Telstra Argent reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Telstra Argent erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Telstra Argent besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Telstra Argent verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Telstra Argent. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Telstra Argent gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
