Benutzeranleitung / Produktwartung RT2350BK des Produzenten Technicolor - Thomson
Zur Seite of 31
EXPORTER Thomson multimedia Inc. P .O. Box 1976 Indianapolis, IN 46206 - 1976 ©2 002 Thomson multimedia Inc. T rademark(s) ® Registered Marca(s) Registrada(s) Marque(s) Deposée 55302850 Rev .1 (EN/F/E) www .rca.com www .rca.com/LatinAmerica Printed in China / Impreso en China IMPORT ADOR Comercializadora Thomson de Mexico, S.
MUTE ON/STANDBY BASS/TREBLE VOLUME LEVEL HOME THEA TER AUDIO VIDEO RECEIVER PHONES TUNING MEMORY FM/AM SETUP TEST TONE EQ DIGITAL INPUT ST / MONO OK SURR MODE DSP MODE VIDEO V-AUX L - AUDIO - R SOURCE SOURCE usermanual RT2350/RT2350BK/RT2600 It is important to read this instruction book prior to using your new product for the first time.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two condi- tions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1 T able of Content FCC Information Getting Started Unpacking the Receiver . . . . . . . . . . . . .2 Unpacking the Speakers . . . . . . . . . . . . .3 Inserting Batteries into Remote Control .3 Set Up and Maintenance of the Receiver . . . . . . . . .
Getting Started Unpacking the Receiver Y ou should receive the following items: 2 MUTE BASS/TREBLE VOLUME LEVEL HOME THEATER AUDIO VIDEO RECEIVER PHONES TUNING MEMORY FM/AM SETUP TEST TONE EQ DIGITAL .
Getting Started Unpacking The Speakers • one set of speakers including 2 front speakers, 1 centre speaker , 1 subwoofer and 2 rear speakers. • 6 speaker wires including: Inserting Batteries into Remote Control Insert two AA(R6) batteries according to the + and - signs on the battery compartment.
Getting Started Connecting to Audio-Visual Components 4 OPTICAL 1 TV VCR CD Player T ape Deck SA T to LINE OUT (T ape Deck) to LINE IN ( T ape Deck ) to AUDIO OUT (CD) to VIDEO OUT (SA T) to AUDIO OUT.
Getting Started EN 5 Digital Connections Read instructions carefully when connecting compo- nents to the receiver . Digital In Jacks can accept Dolby Digital (AC-3), DTS (RT2600 only) or PCM signals when compatible components are connected.
Getting Started Connecting the Speakers Speakers There are 6 speakers equipped with the unit (2 front, 1 center , 2 rear , 1 subwoofer). In order to enjoy good surround effects, all six speakers need to be connected to the receiver . At least two front speakers (left and right) are required.
Getting Started Positioning your speaker 1 Left, Right (Front Speakers) They carry primarily music and sound effects 2 Center In surround mode, the center speaker carries much of the dialogue as well as music and effects. It should be set between the left and right speakers.
Getting Started Preferr ed surround placement Location If possible, place surround speakers to either side of the listening area, not behind it. Height If space permits, install surrounds 2-3 feet above viewers. This helps to minimize localization effects.
Getting Started EN 9 Te st T one / Channel balance Channel balance Y our receiver is equipped with a test signal generator for balancing the channels. As the signal "travels" from channel to channel, adjust the level controls until each channel plays at the same loudness level.
MUTE BASS/TREBLE VOLUME LEVEL HOME THEA TER AUDIO VIDEO RECEIVER PHONES TUNING MEMORY FM/AM SETUP TEST TONE EQ DIGITAL INPUT ST / MONO OK SURR MODE DSP MODE SOURCE VIDEO V-AUX L - AUDIO - R SOURCE ON/STANDBY Operating Y our Receiver Receiver Controls 1.
Operating Y our Receiver EN 11 Y our Remote Control Please be sure you have inserted the batteries into the remote control (see relevant section on page 3.
Operating Y our Receiver S RS R C • Audio output is in dts mode (RT2600 only) • Audio output is in Dolby Digital mode. • Audio output is in Dolby Pro Logic mode. • Audio output is in Dolby Pro Logic II mode. (RT2600 only) • T uner stereo signal detected.
Operating Y our Receiver EN 13 Switching on/off • T o switch on the receiver , press ON/ST ANDBY button once, or any source button on the remote control. • Standby: when the receiver is on, press the ON/ST ANDBY button once to activate the standby mode.
Operating your Receiver Y ou can connect up to 7 audio/video sources to this amplifier: Source button Corresponding connector (receiver front panel) (receiver back panel) - DVD DVD IN (audio / video) .
Operating your Receiver EN 15 Using the receiver to play a sour ce After having properly connected a source (DVD, CD, VCR) to the receiver , you can partly control them through the receiver . Playing a DVD with the receiver 1. Connect a DVD player to the receiver (see connect- ing your receiver for details) 2.
Operating your Receiver Operating the Radio The receiver has a built-in tuner that allows for AM/FM radio function. Manual tuning 1. Connect the FM and AM antenna accordingly (see "Connecting the Antenna" on page 5 section for details) 2. Press ON/ST ANDBY to switch on the receiver .
EN 17 Operating your Receiver Storing radio stations: The receiver can store up to 40 radio stations in memory . Y ou can enter every single radio station yourself or the receiver can store all available radio station automatically in an ascending order .
Operating your Receiver Retrieving preset stations 1. Press FM/AM to select tuner mode 2. Press MEMOR Y/MENU button to enter preset set- ting mode ( MEMOR Y icon shows on display), Press TUNING UP/DOWN to select preset station.
EN 19 Advanced Sound Contr ol Sound Enhancement Systems This receiver is equipped with several built-in sound enhancement systems. Dolby Pro Logic II (R T2600 only) The Pro Logic II mode uses the buil.
20 Advanced Sound Contr ol Stereo The Stereo mode uses the two main channel outputs from the front speakers. Use this mode if you have connected the front speakers only . DSP (Digital Sound Processor) These digital sound effects resemble sounds in a real environment such as (ST ADIUM / THEA TER / CONCERT / CLUB / CHURCH / ARENA) .
EN 21 Advanced Sound Contr ol Fine Setting of the Speakers This receiver supports a wide range of speakers and subwoofers. For optimal surround sound enjoyment, you need to register the speaker selection settings of your audio system. If you buy this receiver with accompanied speaker package, then this step has been done for you.
22 Advance Sound Contr ol Use a subwoofer to enjoy optimum sound. • Subwoofer Phase: T ry both settings and select the sound preferred. • Speaker distance: For optimum surround experi- ence measure the distance between the speaker and your favorite listening position.
EN 23 Car e and Maintenance Tr oubleshooting Tips Receiver/T uner Operation ST indicator is off. • Adjust the antenna. • Press DIGIT AL INPUT/ST/MONO button to insure you are not outputting in mono. The signal is Mono. Severe hum or noise. • The signal is too weak.
24 Remote Codes CABLE CODES ABC 5002, 5003, 5004, 5005, 5006, 5009, 5053 ANTRONIX 5008, 5009 ARCHER 5008, 5009, 5010, 5011 CABLETENNA 5008 CABLEVIEW 5008 CENTURY 5011 CITIZEN 5011 COLOUR VOICE 5012, 5.
EN 25 Remote Codes MEMOREX 2002, 2011, 2013, 2014, 2021, 2023, 2026, 2104, 2131 MGA 2029, 2065, 2113 MGN TECHNOLOGY 2013 MIDLAND 2053 MINOL T A 2055, 2056, 2107 MITSUBISHI 2029, 2055, 2056, 2065, 2066.
26 Remote Codes KAWASHO 1002, 1004, 1006 KA YPANI 1175 KENWOOD 1004, 1006, 1019 KLOSS NOV ABEAM 1068, 1069, 1174, 1183 KTV 1038, 1070, 1171, 1176, 1177 LOEWE 1062 LOGIK 1083 LUXMAN 1004, 1006 LXI 1000.
EN 27 Limited W arrranty (U.S.) What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor and parts • The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
28 Limited W arranty (Canada) What your warranty covers: • Defects in materials or workmanship. For how long after your purchase: • One year from date of purchase for labor and parts • The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.
Ein wichtiger Punkt beim Kauf des Geräts Technicolor - Thomson RT2350BK (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Technicolor - Thomson RT2350BK noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Technicolor - Thomson RT2350BK - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Technicolor - Thomson RT2350BK reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Technicolor - Thomson RT2350BK erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Technicolor - Thomson RT2350BK besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Technicolor - Thomson RT2350BK verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Technicolor - Thomson RT2350BK. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Technicolor - Thomson RT2350BK gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
