Benutzeranleitung / Produktwartung CR-H255 des Produzenten Teac
Zur Seite of 44
9A10355200 CR-H255 OWNER’S MANUAL CD/Receiver Z.
2 Contents Thanks you for choosing TEAC. Read this manual carefully to get the best performance from this unit. Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Remote Control Unit . . . . . . . . . . . . . . . . . . . . . .
CAUTION The product shall not be exposed to dripping or splashing and that no object filled with liquids, such as vases, shall be placed on the product.
Compact Disc Discs which can be played on this unit: • Conventional audio CDs bearing the CD-DA logo on the label: • Properly finalized CD-R and CD-RW discs Note: < Depending on the quality of the disc and/or the condition of the recording, some CD-R/CD-RW discs may not be playable.
5 MP3 and WMA < This unit can play MP3 and WMA files recorded on a CD-R, CD-RW or USB storage device. < File names of MP3 or WMA should be alphanumeric characters. This unit cannot display symbols and full-size or double-byte characters (such as Japanese, Chinese, etc.
6 Connections SUBWOOFER SPEAKER LINE IN A B Speaker Connections Caution: < To avoid damaging the speakers by a sudden high-level signal, be sure to switch the power off before connecting the speakers. < Check the impedance of your speakers. Connect speaker with an impedance of 6 ohms or more.
7 C LINE OUT LINE IN R L R L Cassette Deck MD, CD-R, etc. R L R L LINE OUT L R VCR, DVD, etc. LINE OUT DIGITAL IN (OPTICAL) LINE IN E D AC Power Cord Plug this AC power cord into an AC wall socket.
8 Connecting Antennas (AM/FM) < If the AM loop antenna provided does not deliver sufficient reception (often due to being too far from the transmitter or in a concrete building, etc.
9 Connecting Antennas (DAB) DAB Indoor Antenna Connect the T-type DAB antenna to the DAB socket, extend the lead vertically and attach it to a window frame or wall with thumbtacks, or the like, where reception is best. < You can check the antenna adjustment or positioning for the best reception by viewing the signal strength on the display.
10 Names of Each Control 1 Q P O N M L K J I H G F B A E C D Remote Sensor When operating the remote control unit, point it towards the remote sensor. Display Disc tray OPEN/CLOSE ( L ), TUNING MODE, ENTER In CD mode, use this button to open and close the disc tray.
11 STOP ( H ), INFO, RDS MODE, CLEAR In CD mode or USB mode, use this button to stop playback. In DAB mode, this button is used to change the text content on the second line of the display, to show DLS (Dynamic Label Segment, info text supplied by each radio station), Programme type (classification given by the radio station i.
Names of Each Control 2 STANDBY/ON Press this button to turn the unit on or standby. FILE ( b , 5 ) Use these buttons to select a file of MP3/WMA. FOLDER ( b , 5 ) Use these buttons to select a folder of MP3/WMA. PRESET ( b , 5 ) In TUNER mode, use these buttons to select the preset stations.
CLEAR Use this button to clear a program. In the USB mode, use this button to delete recorded files. SLEEP Use this button to set the sleep timer. Input selector Use these buttons to select a source. PAUSE ( J ) In CD mode or USB mode, use this button to pause playback.
14 B A How to select SOURCE Every time the SOURCE button is pressed, the mode is changed as follows: A Basic Operation Adjust the volume To protect speakers from a sudden high-level signal, gradually turn up the volume to the required level with the VOLUME knob.
Bass control This control is used for adjusting the level of the low frequency sound range. Treble control This control is used for adjusting the level of the high frequency sound range. Balance control This control is used for adjusting balance of the volume level between the left and right channels.
16 Listening to CD/MP3/WMA (discs) Press the OPEN/CLOSE button ( L ). 2 Place a disc on a tray with the printed surface up. 3 Press the OPEN/CLOSE button ( L ) to close the tray. 4 Press the PLAY button ( G ). Playback starts from the first track/file.
17 Listening to a USB device 2 1 3 Search 1 3 2 4 You can play MP3/WMA files by connecting various external USB storage devices such as USB flash memory. Select USB function by pressing the SOURCE button repeatedly. ‘Not connected’ will be displayed if no USB device is connected.
18 To stop playback Press the STOP button ( H ) to stop playback. A A B C D To suspend playback temporarily (pause mode) Press the PAUSE button ( J ). Playback stops at the current position. To resume playback, press the PLAY button ( G ) or PAUSE button ( J ).
19 Repeat Playback Repeat A-B This function allows repeat playback of any desired portion of the disc. Designate the point at which repeat playback should start by pressing the A-B button. ‘Repeat A-’ lights up and ‘B’ blinks. When the point at which repeat playback should end is reached, press the A-B button again.
20 Programmed Playback Press the PROGRAM button in the stop mode. 1 Select the desired track or file by pressing the . or / button and press the PROGRAM button to enter. 2 Repeat this step to store other tracks. < If you attempt to program more than 32 tracks or files, ‘P-FULL’ is displayed and no more can be programmed.
To clear the program 1. In the stop mode, press the PROGRAM button. 2. Hold down the CLEAR button for more than 4 seconds. < If the OPEN/CLOSE button ( L ) is pressed, the programmed contents will also be cleared.
elapsed time of the current track remaining time of the current track 22 Time Display When playing back an audio CD, each time the TIME button is pressed the display changes as follows: Display During MP3/WMA playback, press the DISPLAY button repeatedly to change what information is displayed.
23 Before Recor ding Setting the Record Mode 2 1 3 You can select the desired record mode. In USB mode, press the REC MODE button. 1 This unit can record musics from CDs, cassette tapes and radio, on USB memory devices, as MP3 or WMA files. CAUTION < Do not disconnect the USB storage device during recording.
Recording to USB 1 2 3 You can record a source of CD, MP3/WMA disc, cassette tape, radio broadcast and external device to the external USB storage device as MP3/WMA files. Connect the external USB storage device to the USB port on the front panel of the unit.
25 The following screen will display for 2 seconds. The unit will scan for broadcast services in the local area and add them to the channel list as they are found. The scan should take about 10 seconds. As channels are added to the channel list the number of channels found is displayed.
26 < To display the signal strength of a channel, press the ENTER button. The signal strength is displayed. Press the ENTER button once again to cancel the signal strength display. < Channels are displayed in alphanumeric order in the channel list, with numbers coming first.
27 Using Function Control 1 In DAB mode, use Function Control to set system options. There are four options in the function control: Station order, Preset tune, DRC value and Manual tune. Station order Use station order to set the order in which stations are listed.
28 Using Function Control 2 Preset tune Use this option to select the DAB preset station. While listening to a DAB broadcast press the FUNCTION/FM MODE button. 1 The currently tuned station is displayed. Press the TUNING/PRESET/TIME button until the desired preset station is displayed.
29 Press the TUNING/PRESET/TIME button until the desired level of DRC is displayed in the second line of the display. 4 Press the ENTER button. 5 Manual tune This option allows you to manually tune in a channel and view a continuously updated display of the strength of the signal.
30 You can choose the type of information displayed in the second line of the display while listening to a DAB channel. Each time the INFO/RDS MODE button is pressed, the information is displayed as follows. Multiplex name This displays the name of the Mulitplex that is broadcasting the programme.
31 Sw version (Software version) This displays the version number of the installed software. Sig error rate (Signal error rate) This displays the digital bit error rate (0-99) of the currently tuned channel. The lower the figure the better the quality of the received broadcast.
32 Listening to FM/AM Selecting stations which cannot be tuned automatically (Manual tune) Select ‘Manual tune’ in step . Repeatedly press the TUNING/PRESET/TIME button until the station you want to listen to is found. Or hold down the TUNING/PRESET/TIME button until the station you want to listen to is found and release the button.
FM or AM DAB ‘CH01’ or ‘01’ blinks on the display. 33 Preset T uning 1 You can store up to 30 FM, 30 AM and 10 DAB stations. Preset Manually (FM/AM/DAB) Select DAB, AM or FM by pressing the BAND button. 1 1 1 4 5 2 4 3 Tune the station you would like to store.
34 Preset T uning 2 1 2 3 < Preset channels can also be selected by the PRESET ( b / 5 ) buttons or the numeric buttons of the remote control. < When you use the numeric buttons, press the input selector button of the remote control first. < When using the remote control, you can skip step .
35 RDS The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM station (see steps to of page 32).
36 1 2 4 3 5 PTY Search You can search for stations by programme type. Select FM by pressing the BAND button. 1 Press the INFO/RDS MODE button for more than 3 seconds. 2 Select the desired PTY programme using the TUNING/PRESET/TIME buttons. 3 Select your desired one from among 31 kinds of PTY programmes.
News: brief announcements, events, public opinion, reports, actual situations. Current Affairs: a kind of suggestion including practical announcements other than news, documents, discussion, analysis and so on. Information: daily information or reference such as weather forecast, consumer guide, medical assistance and so on.
38 Every time the TIME MODE button is pressed, the mode is changed as follows. < The unit uses the 24-hour ‘military’ clock. < When no action is taken for 1 minute, the time adjust mode will be cancelled. < Press the STOP button to cancel the time setting.
39 ENTER TUNING/PRESET/ TIME TIME MODE STANDBY/ON Setting the Timer < Adjust the clock before setting the timer. < When no action is taken for 1 minute, the timer setting mode will be cancelled. Press the TIME MODE button repeatedly until ‘On time’ is displayed.
40 Sleep Timer The power can be switched off after a specified amount of time. Press the SLEEP button repeatedly until desired time appears on the display. SLEEP-90 (80, 70 ... 10) The power will be switched off 90 (80, 70 ... 10) minutes later. (normal display) The sleep timer is off.
41 Specifications GENERAL Power Requirements . . . . . . . . . . 230 V AC, 50 Hz Power Consumption . . . . . . . . . . . . . . . . . . . 75 W (standby) . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 W Dimension (W x H x D) . . . . . .215 x 110 x 359 mm Weight .
42 Tr oubleshooting Amplifier No power e Check the connection to the AC power supply. No sound from speakers. e Check the connection to the speakers. e Adjust the volume. e Select proper source. e Pull out the headphone plug from PHONES jack. e If muting is on, press the MUTING button.
43 CD Player Cannot play. e Load a disc with label side up. e If the disc is dirty, clean the surface of the disc. e A blank disc has been loaded. Load a prerecorded disc. e Unfinalized CD-R/CD-RW disc is not playable. Finalize the disc properly. Sound skips.
0905 . MA-1008A Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
Ein wichtiger Punkt beim Kauf des Geräts Teac CR-H255 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Teac CR-H255 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Teac CR-H255 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Teac CR-H255 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Teac CR-H255 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Teac CR-H255 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Teac CR-H255 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Teac CR-H255. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Teac CR-H255 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
