Benutzeranleitung / Produktwartung US-224 des Produzenten Tascam
Zur Seite of 44
1 TASCAM TEAC Professional Division US-224 Universal Serial Bus Digital Audio Workstation Controller OWNER’S MANUAL D000640100 A.
2 Important Safety Precautions CAUTION : TO REDUCE THE R ISK OF ELECTRIC SHO CK, DO NOT REM OVE COVER (OR BACK). NO USER-SER VICEABLE PARTS INSID E. REFER SERVICING TO QUALIFIED SERVIC E PERSONNEL.
3 Read all of these Instructi ons. Save these Instructions for l ater use. Follow all W arnings and Instructions marked on the audio equipment. 1) Read instructions — All the safety and operating instru cti ons should be read before the produ ct is operated.
4 This product is des igned to help y ou r ecord and reproduce s ound works to which y ou own the copyright, or where y ou have obtained perm ission from the copyright holder or the rightf ul licensor.
5 Table of Contents Table of Contents ........................................ 5 Introduction ................................................. 6 1.1 Overvie w............................................ 6 1.2 Features ................................
6 Introduction 1.1 Overview The US-224 is a USB contr oller designed for Cubasis and other Digital Audio W ork station (DAW ) so ftware applications . Its design incorporates a two-input, two-output 24-bit audio interfac e, a 16-channel MIDI inter face, and a c ontrol sur face f or your most- used mous e functions .
7 2. Controls and Indicators 2.1 Front Pan el 1. Powe r LED 2. USB LED 3. MIDI In & Out LEDs 4. Mi c/Line – Gtr Sw itch es 5. Signal a nd OL LEDs 6. A and B Input Trims 7. Line Out and Phones Output Levels 8. DA T A W heel 9. NULL Switch and LED 10.
8 2.2 Rear Pan el 18. PHONES jack 19. OUTPUT L/R ja cks 20. INPUT A and B 21. MIC INPUT A a nd B 22. Digital In and Out 23. MIDI Out 24. MIDI In 25. USB jack 26.
9 2.3 Front Pan el Descriptions 1. Power LED Indicates that the unit is powered on when lit. 2. USB LED Indicates a valid USB connection to the host com puter when lit. 3. MIDI In LED indicates pres ence of inc om ing MIDI data at MIDI input. MIDI Out LED indicates trans m ission of MIDI data f rom MIDI output.
10 14. Channel Fade r s send continuous controller infor mation f or banks of f our faders , as selected by the BANK switch Mast er Fader controls level to the s tereo bus output, and/or s ends MIDI controller inform ation to the host. 15. SELECT Sw itch es selects channel for editing, recording, etc .
11 3. Installation 3.1 System Requirements PC: Minim um requir em ents : Pentium II - 266 MHz (or equivalent) proc essor running W indows 98 ( Second or Millennium Edition), W indows 2000 or W indows X P, 96MB RAM. Recom m ended : Pentium II 300MHz process or with 128MB RAM or better.
12 MacOS: PowerPC running MacOS 8.6 or better, and a USB port. Any Mac intosh com puter with one or mor e USB ports running Mac O/S 8.6 or later (the US-224 has not been tested with Mac O/S X as of this writing. Pleas e check the website for updates).
13 In some cases, Add Hardware W iz ard m ay ask for the f ile "US224W DM.SYS". Should this oc cur, c lick Browse and direc t it to the path Windows/System32 /Drivers . In some cases, Add Hardware W iz ard m ay ask for your W in98 CD-ROM if it is unable to find all the needed system files.
14 3.2.2 Macintosh Insert the CD- ROM into the com puter, double-click on the US-224 ins taller, and follow its inst ructions . Connect the US-224 to the com puter, and connect power to the unit. W hen the US-224 is connec ted and powered up, the Mac will find the drivers itself .
15 Certain devices, s uch as network car ds and W inModems , can caus e conflicts with the native handling of USB. Should y ou ex perience suc h conf licts, the off ending device can usually be tempor arily disabled in the Device Manager. Refer to your W indows manual for detailed instr uctions on how to resolve conf licts.
16 3.5 Notes on USB interfa cing The USB pr otocol is an extr em ely ver satile one, and muc h has been m ade of the possibility of using m ultiple ( over 100) devices on a single bus. W hile this is certainly a possibility, w e r ecom m end using as f ew other USB devices as possible in a system equipped with the US-224.
17 4. Hooking up Audio and MIDI to the US-224 4.1 Hooking up audio To m onitor output f rom your computer, connect the analog outputs of the US-224 to y our mix er, am plifier or powered monitors . Output volum e is contr olled by the LINE OUT level pot.
18 input is pass ed directly to the application without modif ication. To r educe the level of the digital audio signal at inputs A and B, y ou will need to r educe the output level of y our digital source.
19 4.4 Monitor vs. Master L evel It’s im portant to m ak e a distinction between MONIT OR LEVEL control and level of the stereo bus output, as contr olled by the MASTER FADER. W hen using the US-224’s analog inputs, only the T RIM contr ols actually affec t the input level to the audio s oftware application.
20 5. The US-224 Contr ol Panel 5.1 Main Pa ge In the Contr ol Panel’s m ain page, you can specif y a num ber of options of the US-224’s ASIO handling. The Control Surface Pr otocol setting governs the ty pe of MIDI m essages us ed to send fader and button inform ation f rom the US-224 to applications.
21 You can also contr ol the input m onitor settings that will be used when the US-224 first s tarts up. You can choos e either the last settings in ef fect at the previous system shutdown, or any one of the four snapshots . 5.2 Buffer Size Adjus tment The US-224 Contr ol Panel contains a second page, tabbed “System” .
22 The num ber s below the tuning lights indicate how far out of tune the note is , in cents (100 cents is one sem itone). W hen the note is in tune, the center ‘0’ light and both the Flat and Sharp arrows are br ight green. Note: T he chrom atic tuner c onsum es som e CPU bandwidth in y our system .
23 6. Interfacing with your Audio Software This sec tion is intended to pres ent the basic concepts needed to inter face the US-224 with the bundled Cubasis VST applic ation. This discuss ion, however, is not intended to replace your software’s us ers’ m anual.
24 To do this in Cubase (full versions ), for exam ple, se lect the VST Rem ote option from the Audio m enu, and choos e the US- 428 option ( See illustr ation 6.
25 Highlight a track in the arrange window, and that trac k will automatic ally be R ecord- Enabled. (see illust ration 6.07) Verify that the drop-in and drop-out f eatures in Cubasis (on the tr ansport bar) are not enabled (or if so, that they are enabled at the desir ed locate points ).
26 6.5 Mute/Solo The MUT E buttons toggle the Mute function in Cubasis’ VST Channel Mixer f or the selected c hannel. W hen a channel is muted, there are two indications: the Mut e button in the Cubasis VST Channel Mixer’s display will be activated, and the MUT E LED on the US-224 c orresponding to the muted tr ack (s) will be illuminated.
27 To enable Dire ct Monitoring in Cubase VST, open the Audio Control Panel. In the “Monitoring” sec tion of the window, check “ASIO Direct Monitor.
28 7. A Sample Recording Session in Cubasis Ok ay . You’ve got y our US-224 connected to y our com puter, and you’ve loaded the drivers. Your audio sof tware is loaded, and y ou’r e ready to cut some track s. Let’s walk through a typical recording ses sion with the US-224 and Cubasis.
29 Connect your audio sourc es to the US-224. Connect an analog s ource via the XLR or 1/4” inputs , or a digital sourc e via the S/PDIF input. 7.2 Recording Your Tracks In Cubasis , choos e the input(s) you wish to enable on the US-224. In the Audio menu, sele ct Input , and c lick on the input pair on the US-224.
30 W hen the corresponding LED is illuminated, channel strips 1 and 2 can be used to adjust the level, pan and m ute status of inputs A and B, respec tively . T his will enable the first two faders as Input level monitor s, allowing y ou to hear the inputs at the source, in sync with the previously r ecorded trac ks .
31 8. Other Applications and US-428 Emulation Mod e As we’ve mentioned thr oughout this manual, the US-224 is an extr em ely ver satile device. Its c apabilities as a c ontroller go well beyond those we’ve desc ribed thus f ar with the bundled Cubasis progr am.
32 8.1 Setting up Sound Manager Support (for use with ProTools Free and Other MacOS Applications) The Macintosh Sound Manager is a standard 2-c hannel software inter face f or play ing and rec ording sound on a Mac .
33 under “ Volume” in this c ontrol panel is only used to enable or m ute the US-224 output. Under “Sound In” you can select the “US- 224” ins tead of the Mac’s Built-in sour ces. You can also do this under the “US-224” control panel’s “System” tab.
34 9. Technical Support 9.1 Troubleshooting W hen installing the US-224 f or the firs t time, if you experience any unusual behavior, here are som e things to c heck : Audio Drivers In Control Panel / System / Device Manager (W in98SE/ME) or Control Panel / System / Har dware / Device Manager (W in2000/XP), find the Audio control panel.
35 Also, since m any of the situations you’re likely to enc ounter will be related to the software you’re using, it’s a good idea to check not only our website, but the websites and res ources of the sof tware program ’s manuf acturer as well.
36 Appendix A - MIDI Implementation Chart Function Transmitted Recognized Remarks Basic Channel Default Changed X X X X Through Mode Default Messages Altered X X …… X X Through Note Number Tr ue V.
37 Appendix B – Control Protocol Purpose Provide sim ple, eff ective integration between the US-224 and hos t soft ware applications. Introduction The US-224 pr ovides digital audio I/O , MIDI, and control sur face f unctions in a s ingle aff ordable USB-based produc t.
38 Transport/Locate command s et The US-224 contains a s et of s tandar d trans port s witches : REW , FF W D, ST O P, PLAY, and REC. In addition, dedicated status LED's are used to c omm unicate the c urrent trans port state to the user. T he LED's indicate REW , FF W D, PLAY, and REC.
39 Per-channel Control command set The US-224 includes a set of 4 channel- strip controls and LED's. Each channel- strip includes the following controls : a. linear fader for gain c ontrol b. Mute/Solo switch and LED c. Record- enable LED d. Select switch and LED Three m odif ier switches af fec t the channel str ip indicators: a.
40 Host to US-224 Mess ages: Note: In these m essages , <STRIP #>is a number in the range [0..3], corr esponding to the channel-str ip #, and <ST ATE>is either 0x00 (LED OF F) or 0x 7F (LED ON) . Trans m it<UNIT> as 0 for now. 1. UPDATE_MUT E_LED: F0 4E<UNIT >12 02<STRIP #> <ST ATE> F 7 2.
41 US-224 to Host Com m ands: DATA_W HEEL (identical to J L Cooper CS-10) a. BF 60 vv, vv = 2's com plem ent us ing 7 data bits Host to US-224 Mess ages: UPDATE_ASN_LED: F0 4E<UNIT > 12 0F<ST ATE> F7 where <UNIT> T ransm it as 0 f or now.
42 Appendix C - US-224 Techn ical Specifications General Frequency Response 20 Hz - 20KHz 1.0 dB / -3.0 dB LINE INPUT A/B to LINE OUT PUT TRIM min., +4 dBu input LINE OUTPUT level m ax. Noise Level Better than 92 dB A W eight MIC INPUT A/B to LINE OUTPUT TRIM min.
43 DIGITAL IN Connector : RCA pin jack Format : IEC60958 Type2 Input impedance: 75 ohm Input Level : 0.5Vp-p DIGITAL OUT Connector : RCA pin jack Format : IEC60958 Type 2 Output Impedance: 75 ohm Output Level: 0.
44 Printed In Taiwan MA-0631 Ž US-224.
Ein wichtiger Punkt beim Kauf des Geräts Tascam US-224 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tascam US-224 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tascam US-224 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tascam US-224 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tascam US-224 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tascam US-224 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tascam US-224 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tascam US-224. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tascam US-224 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
