Benutzeranleitung / Produktwartung CD-200SB des Produzenten Tascam
Zur Seite of 48
D01174820B CD-200SB CD / Solid State Player OWNER'S MANU AL.
2 T ASCAM CD -200SB IMPORT ANT SAFETY PREC A UTIONS The exclama tion point within an equilateral triangle is int ended to alert the user to the presence of important operating and maint enance (servicing) instructions in the litera - ture accompan ying the appliance.
T ASCAM CD -200SB 3 IMPORT ANT SAFETY INSTRUCTIONS • The apparatus dra ws nominal non-operating power from the A C outlet with its POWER or ST ANDBY/ON switch not in the ON position. • The mains plug is used as the disconnect device, the disconnect device shall remain readily operable .
4 T ASCAM CD -200SB 8 CA UTIONS ABOUT BA T TERIES This product u ses batteries. Misuse of bat teries c ould ca us e a le ak , r up tur e or o th er t ro ub le. A lw ays a bi de by the following precautions when us ing batteries. • Never recharge non-rechargeable batteries.
T ASCAM CD -200SB 5 C onten ts 1 – Introduc tion ...................................................................... 7 Features .................................................................................. 7 Included item s .................
6 T ASCAM CD -200SB 9 – Message Lists .................................................................. 43 Operation messages ........................................................ 43 Warning message s ............................................
T ASCAM CD -200SB 7 1 – Intr oduc tion Thank you f or your purchase of the T ASC AM CD-200SB CD / Solid State Play er . Before connecting and using the unit, please take time to r ead this manual thoroughly to ensure y ou understand how to properly set up and connect the unit, as well as the operation of its many useful and con venient functions.
8 T ASCAM CD -200SB 1 – Intr oduc tion T rademarks • T ASCAM is a registered tr ademark of TEAC C orporation. • SDHC Logo is a trademark of SD-3C, LL C.
T ASCAM CD -200SB 9 1 – Intr oduc tion SD cards and USB flash driv es This unit can use SD cards and USB flash drives f or playback and dubbing. A list of SD cards and USB flash drives that w e have confirmed to operate with this unit is posted on the T ASCAM website (http:// tascam.
10 T ASCAM CD -200SB 2 – Names and func tions of par ts T op panel 1 POWER switch Press this swit ch to turn the unit on or off . NO TE • Before turning this unit’ s pow er ON/OFF , minimize the volume of monitoring systems c onnected to it. • Do not wear headphones when turning the power ON/OFF .
T ASCAM CD -200SB 11 2 – Names and func tions of par ts w USB port Connect and disconnect USB flash drives here. (See “Connecting and disconnecting USB flash drives ” on page 19.) This unit can dub to USB flash drives and playback files on them.
12 T ASCAM CD -200SB 2 – Names and func tions of par ts Rear panel f ANAL OG OUTPUT (UNBALANCED) jacks These jacks output analog signals (–10 dBV ) of the CD , SD card or USB flash drive playback sound sig nal. g DIGIT AL OUTPUTS (C OAXIAL) jack This jack outputs the CD , SD card or USB flash drive pla yback signal in S/PDIF digital format .
T ASCAM CD -200SB 13 2 – Names and func tions of par ts Display 1 Playback mode indicator This shows the curren t playback mode. Indicator Playback mode None Continuous playback mode SNGL Single pla.
14 T ASCAM CD -200SB 2 – Names and func tions of par ts Remote con trol unit (T ASC AM RC-CD200SB) 1 DISPLA Y button Press t o change how the time is shown and other infor - mation. When this button is pr essed, the type of information currently display ed is shown for two seconds .
T ASCAM CD -200SB 15 2 – Names and func tions of par ts e OPEN/CL OSE button Use to open and close the disc tray . r MEDIA SELECT button Set the current media to CD , SD card or USB flash driv e. Cy cle through the current media options NO TE Y ou cannot select SD or USB if the corresponding media type is not loaded.
16 T ASCAM CD -200SB 3 – Pr epar a tions Making connec tions Examples of connections that can be made with a CD-200SB are shown below . 8 Precautions bef ore making connections • Before connecting other devices , read their operation manuals carefully and c onnect them properly .
T ASCAM CD -200SB 17 3 – Pr epara tions Preparing the r emote c ontrol Inser ting batteries 1. Open the lid. 2. Confirm +/- polarity , and insert t wo AA batteries . 3. Close the lid. Replacing the batteries Replace both batteries with new ones when the range of the remote contr ol becomes short or if the function buttons become unresponsive .
18 T ASCAM CD -200SB 3 – Pr epara tions Inser ting and remo ving SD cards Inser ting SD cards T o use an SD card with this unit for playback/dubbing , insert the SD card into the SD car d slot on the front panel. NO TE Y ou can insert an SD card regardless of whether the power is ON or OFF .
T ASCAM CD -200SB 19 3 – Pr epara tions C onnecting and disconnec ting USB flash drives Connecting USB flash drives T o use a USB flash drive with this unit for playback and dubbing , insert it into the USB por t. NO TE Y ou can insert a USB flash drive anytime regardless of whether the power is ON or OFF .
20 T ASCAM CD -200SB 4 – Pla yback In this chapter , we e xplain playback functions that can be used with tracks on audio CDs and audio files on data CDs, SD car ds and USB flash drives.
T ASCAM CD -200SB 21 4 – Pla yback Playback ar ea Y ou can set the area to be used for pla yback (PLA Y AREA setting). F ollow the procedur es below to set the playback ar ea.
22 T ASCAM CD -200SB 4 – Pla yback Selec ting the playback mode Press the main unit PLA Y MODE/INTRO CHECK [PLA Y AREA] button or the remote PLA Y MODE button to cycle through the playback modes. During playback, howev er , you can only switch among continuous, single and random pla yback modes.
T ASCAM CD -200SB 23 4 – Pla yback Selec ting a track There are tw o ways to select a track. Y ou can move (skip) to the previous or next track, or you can select a track directly by its track number . Skipping to the next or previous tr ack Use the main unit SEARCH m / , [ .
24 T ASCAM CD -200SB 4 – Pla yback F older playback (da ta CDs/SD cards/ USB flash drives) With data CDs , SD cards and USB flash drives, y ou can set the selected folder (current f older) as the playback area. F ollow the procedures belo w to set the playback f older .
T ASCAM CD -200SB 25 4 – Pla yback Setting the program When no program is set , follow the proc edures below to set a program using the r emote control . Y ou can set programs independently f or each type of media (CD/ SD card/USB flash drive). NO TE • The program cannot be set from the main unit.
26 T ASCAM CD -200SB 4 – Pla yback Checking the program Y ou can check the contents of the prog ram. 1. Press the PR OGRAM EDIT button on the remote contr ol while playback is stopped to put the unit int o program setting mode. The track number and playback time of the track set as program step 01 is sho wn on the screen and PROG blinks.
T ASCAM CD -200SB 27 4 – Pla yback Repeat playback Y ou can play back all the tracks in the playback area r epeatedly . Press the main unit REPEA T [PIT CH] button or the remote REPEA T button to turn the repeat playback function ON/OFF . Repeat ON (REPEA T indicator appears) All tracks are play ed back repeatedly .
28 T ASCAM CD -200SB 4 – Pla yback NO TE • After pressing the DISPLA Y [SHIFT ] button on the main unit or the DISPLA Y button on the remote control, the currently selected type of information to be shown on the main display appears for two seconds as follows.
T ASCAM CD -200SB 29 Intro Check function When stopped or during playback press and hold the main unit PLA Y MODE/INTRO CHECK [PLA Y AREA] button or press the remote INTRO CHECK button t o play the first 10 seconds of each track one after another . The INTRO indicat or appears when this function is active.
30 T ASCAM CD -200SB 5 – Bro w sing Using this unit’ s browse function, you can examine the folder and file structure of SD cards and USB flash drives without need for a computer . The name of the selected folder or file is shown on the displa y along with an icon that indicates its type.
T ASCAM CD -200SB 31 5 – Bro w sing 3. T o move down a level , select the folder ( ) y ou want to open, and press the main unit FOLDER t [PIT CH +, ] button or the remote FOLDER t [ ] button. After opening a folder , the first subfolder or track inside that folder is shown on the displa y .
32 T ASCAM CD -200SB 6 – Direc t folder function Y ou can assign folders on an SD card or USB flash driv e to the main unit FOLDER/TRACK SELECT (1–10/0) buttons. When you press a button with an assigned f older , you can immediately select that folder on the SD card or USB flash drive and start playback.
T ASCAM CD -200SB 33 6 – Direc t folder function Assigning direct folders individually 1. Press the MEDIA SELECT button on the main unit or the remote and select the media that contains the f older that you want to assig n as a direct folder . (See “S electing the playback media ” on page 19.
34 T ASCAM CD -200SB 6 – Direc t folder function 3. Press the main unit SET [ A UT O SET ] button or the remot e A UT O SET button again. The unit automatically checks which of the 1–10/0 buttons do not yet have dir ect folder assignments and assigns f olders to them.
T ASCAM CD -200SB 35 6 – Direc t folder function Direct folder playback When the main unit TRK SEL indicator is not lit, lit indicat ors for the FOLDER/TRACK SELECT (1–10/0) buttons show they hav e direct folder assignments f or the current media (SD card or USB flash drive).
36 T ASCAM CD -200SB 6 – Direc t folder function Random playback mode o The tracks in the selected direct folder play back in random order . F or example, if you pr ess button 1, all the tracks in the assigned folder will be play ed back in random order .
T ASCAM CD -200SB 37 6 – Direc t folder function 3. Press the 1–10/0 butt on with a blinking indicator that has the direct folder assignment that y ou want to clear . After the assignment has been cleared , DONE appears on the display for a f ew seconds and then, it returns to its pr evious state.
38 T ASCAM CD -200SB 7 – Dubbing (cop ying) Using this unit’ s dubbing (copying) function you can dub the content of a CD to an SD car d or USB flash drive.
T ASCAM CD -200SB 39 7 – Dubbing (cop ying) Dubbing 1. Load the dubbing sourc e CD . If the dubbing source CD is a data CD , press the main unit or remote MEDIA SELECT button to set the dubbing sourc e media to CD . (See “S electing the playback media ” on page 19.
40 T ASCAM CD -200SB 7 – Dubbing (cop ying) 6. Press the main unit FOLDER/TRA CK SELECT (1–10/0) button or the remote number (1–10/0) butt on for the folder that you want t o select as the dubbing destination. PREPARE appears on the display for a f ew seconds, then the time counter f or the track being dubbed is shown and dubbing begins.
T ASCAM CD -200SB 41 7 – Dubbing (cop ying) Recor ding times when dubbing The following table sho ws recor ding times (in hours and minutes) for diff erent file f ormats and SD/SDHC card and USB flash drive capac- ities. File f ormat (dubbing setting) SD card/USB flash drive 1 GB 2 GB 4 GB 8 GB W A V (STEREO) 16 bit 44.
42 T ASCAM CD -200SB 8 – Er ase folder function Using this unit, you can erase un wanted f olders containing audio files on SD cards and USB flash drives. CAUTION • Y ou cannot use this unit to er ase individual files. • All files (not just music files) in the designated folder will be erased, reg ardless of their statuses (Read Only , etc.
T ASCAM CD -200SB 43 9 – Message Lists Operation messages Depending on the operation of the unit, the follo wing messages will appear in the main display area. Message Meaning Response CANCELED An operation has been canceled . -CLEAR- All prog rams have been clear ed.
44 T ASCAM CD -200SB 9 – Message Lists Error messages If one of the following error messages is shown, please r efer to the Response column and try to resolve it. If you ar e still unable to correct the problem, please contact the nearest retailer or T ASCAM representative .
T ASCAM CD -200SB 45 10 – T roubleshooting If you have pr oblems with your system, look thr ough this chart and see if you can solve the problem yourself bef ore calling the nearest retailer or T ASC AM repr esentative . 8 No power e Is the unit’ s pow er plug completely inserted into a working power outlet? 8 Remote contr ol doesn ’t w ork.
46 T ASCAM CD -200SB 11 – Specifications Ratings Supported media typ es CD , CD-R and CD-R W discs (including 12cm, 8cm and multisession discs and discs with CD text) The following types of media must be f ormatted in F A T16 or F A T32 format. USB (4GB–64GB) SD (2GB) SDHC (4GB–32GB) Playback file forma ts CD-DA: 44.
T ASCAM CD -200SB 47 General Po wer Requir ement AC 120 V , 60 Hz (U.S.A./Canada) AC 230 V , 50 Hz (U.K./Europe) AC 240 V , 50 Hz (Australia) Po wer C onsumption 11 W Dimensions ( W x H x D) 481 x 94.5 x 298 (mm) / 18.94 x 3.72 x 11.73 (in) W eight 4.
TEA C C ORPORA TION http: / /tasc am.jp/ Phone: +8 1-4 2- 3 56-91 43 1 - 4 7 Ochiai, T ama- shi, T ok yo 206 -8530 Japan TEAC AME RICA, INC . http:/ /tascam.com/ Pho ne: + 1-3 23 - 726 - 0303 773 3 T e legrap h Road, M ontebello, Cali fornia 9 06 40 USA TEAC MEXICO , S .
Ein wichtiger Punkt beim Kauf des Geräts Tascam CD-200SB (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tascam CD-200SB noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tascam CD-200SB - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tascam CD-200SB reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tascam CD-200SB erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tascam CD-200SB besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tascam CD-200SB verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tascam CD-200SB. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tascam CD-200SB gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
