Benutzeranleitung / Produktwartung Internet Radio Quattro MKII des Produzenten Tangent
Zur Seite of 33
1.
5 UK - USER MANUAL Contents Internet Radio Quickstart Guide 7 What you need before you can use your Internet radio 7 Controls 8 Connections 9 Steps for connecting your radio to your wireless network 1.
6 Browsing the list of tracks currently queued up for playback 23 Removing tracks from the queue 23 Playing tracks in random order 23 Playing tracks in the queue repeatedly 24 Set up a Windows PC to a.
7 Internet Radio Quickstart Guide What you need before y ou can use your Internet radio Before you can use your Internet radio, you need the following: • A broadband Internet connection. • A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.
8 Controls Power Press this button to turn on and off the radio Volume Turn this button clockwise to turn up the volume, and counter clockwise to turn down the volume. Tune Turn this button to navigate in menus and between channels. 1 / Prev This button selects the previous track during media player mode.
9 Back This button allows you to go back in menus. Select Press this button to confirm your choices in menus etc. Connections 12V DC in For connecting the included 12V DC power supply. Line out For connecting the radio to an external amplifier. Headphone ou t For connecting headphones.
10 Steps for connecting your radio to your wireless network Step 1 - Power up the radi o Plug the cable from the mains adapter into the socket labelled 12V DC on the back of the radio.
11 < My Home Network > It is possible, and in some locati ons highly likely, that your radio will find more than one wireless access point, in which case you can choose w hich one you want to connect to. Turn the TUNE knob on the radio to see the ESSID for each access point the radio has found.
12 SELECT button after each character. Note that WEP and WPA codes are sensitive to upper and lower case characte rs so you must enter them exactly. After the final character, use the TUNE knob to select the END character and press the SELECT button. The radio should now be able to connect to the network.
13 4. Turn the TUNE button until the display says < Wired/Wireless > and press SELECT to confirm. < Wired/Wireless > 5. Now it is possible to choose between Auto, Wired Only and Wireless Only. Choosing a radio station to listen to 1. Press the SELECT button to return to the top-level menu.
14 8. Press the SELECT button and wait until the radio connects to that station. Note that some radio stations do not broadcast 24 hours per day, and some stations are not always on-line.
15 Using your radio for t uning into FM stations Your radio supports an FM tuner with RDS, so you will be able to access standard FM stations from it. 1. You can access the radio’s FM tuner by pressing the ‘Mode’ button twice (pressing the button once will cause the radio to play audio from its auxiliary input).
16 Storing a radio station in a preset Whilst a radio station is playing, hold down one of the preset buttons (numbered 1 to 6) until the screen says Assigned to Preset # Where # is the number of the button you held down.
17 3. When you have chosen the programme you want to listen to, either it will just start playing, or the display may show a li st of days for you to choose from - use the TUNE knob to set the day the programme was broadcast, then press the SELECT button.
18 < Set Time / Date > 8. Press the SELECT button. Set Time 14 :03 9. Turn the TUNE knob until the hour setting is correct, then press the SELECT button. Set Time 15:03 10. Turn the knob until the minute setting is correct, then press the SELECT button.
19 Set Alarm 07:06 7. Turn the TUNE knob until the minute setting is correct, then press the SELECT button. Alarm Set: 07:45 8. Turn the TUNE knob to choose between ONCE, EVERY DAY, WEEKLY, WEEKDAYS and WEEKENDS. • If you choose ONCE, you must choose which weekday you want the alarm to be active.
20 < Weekdays > • If you choose WEEKENDS the alarm will start every Saturday and Sunday of the week on the selected time. Confirm your choice by pressing SELECT. Then you must choose if you want the alarm to be a buzzer, the radio station that you are currently listening or a radio station assigned to a preset.
21 Media Player Quickstart Guide The Media Player allows you to play audio files (AAC, AIFF, AU, MP3, RM, WAV and WMA) and playlists (M3U) stored on a networked PC. It has been verified to work on Windows 2000 and Windows XP. Set up your Windows PC to allow the radio to access your audio files via Window s Shares 1.
22 10. Once the radio has finished scanning, it will d isplay 'By Album'. Y ou can now browse through the scanned media files, which will now be organised ‘By Album’, ‘By Artist’ and ‘Playlists’ – if available. Note that the first time the file scan is done a file called ‘.
23 Controlling play back 1. Use the 5 / STOP button to stop playback. 2. Use the 2 / PLAY button to either pause a currently playing track or to restart a currently paused track or to restart a stopped track. 3. Use the 1 / PREV button to start playback of the previous track in the queue.
24 4. Turn the TUNE knob until 'Playback Mode' is displayed. 5. Press the SELECT button. 6. Turn the TUNE knob until 'Shuffle' is displayed. 7. Press the SELECT button. 8. Turn the TUNE knob to select YES/NO to confirm that shuffle mode should be enabled.
25 • Press SELECT and the radio will scan for all available UPnP servers. Note , this may take a few seconds for the radio to complete its scan and before the scan has completed, the radio will display ‘[Empty]’. The radio will cont inue to display ‘[Empty]’ if no UPnP servers are found.
26 Allowing the Radio to Connect: Locating and playing media file s using the radio and UPnP 1. Once the UPnP server is configured to share media files with the Internet radio, you can play the files by doing the following on the radio. 2. Keep pressing BACK to get to the radio’s top-level menu and then turn the knob to select ‘Media Player’.
27 to highlight a sub category and press SELECT again. For example, you could select ‘Music’ and then ‘Album’. 7. Turn the TUNE knob to highlight the media files that you wish to play and press SELECT .
28 Removing tracks from the queue 1. Press the BROWSE button. The currently playing track name will be displayed. 2. Turn the TUNE knob to select the track you want to remove from the queue. 3. Press and hold the STOP button for 2 seconds. 4. Turn the TUNE knob to highlight ‘Yes’ or ‘No’.
29 Configure menu Choosing the option you w a nt from the Configure menu 1. Press the SELECT button. Note : if you make a mistake at any point, press the BACK button to go back to the previous screen. 2. Turn the TUNE knob until ‘Configure’ is displayed 3.
30 <Language> Allows you to change the display language. <Factory Reset> Puts all the settings back to their defaults as they were when they left the factory. If you perform a factory reset on your radio you will lose al l your presets and your wireless network connection.
31 Configuring ‘M y Stuff’ Registering an account on Reciva’s website 1. Open the website, http://www.reciva.co m, from your Internet browser. 2. Click on the ‘My Account’ link and follow the on-screen instructions to register an account. Please note, during the registration process, a validation code will be sent to you via email.
32 Configuring ‘My Streams’ 1. Once logged into your Reciva website account, you can add your own Internet radio streams to the ‘My Streams’ section, which is listed under the ‘My Account’ section 2. Clicking on ‘My Streams’ will prompt you to enter the station’s na me and its media stream URL.
33 Troubleshooting If you experience any trouble with your wi reless Internet radio, then you may find it useful to visit the help section on our webpage: http://www.reciva.com If you have trouble connecting the radio to your wireless network, these steps may help to resolve the problem: 1.
34 If you can play back the station with a PC, use the form at http://www.reciva.com/ to notify us so that we can change the station data that is used by the radio. Software licence information This product contains software licensed under version 2 of the GNU Public License and version 2.
35 Specifications Connection: 802.11b/g Security: WEP, WPA1 (TKIP) and WPA2 (TKIP) File formats: Real audio, MP 3, Windows media streams, OGG vorbis, AAC, WAV, AIFF and AU Controls: Power button, Volu.
332 Item no.: 40510.02.
Ein wichtiger Punkt beim Kauf des Geräts Tangent Internet Radio Quattro MKII (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tangent Internet Radio Quattro MKII noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tangent Internet Radio Quattro MKII - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tangent Internet Radio Quattro MKII reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tangent Internet Radio Quattro MKII erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tangent Internet Radio Quattro MKII besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tangent Internet Radio Quattro MKII verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tangent Internet Radio Quattro MKII. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tangent Internet Radio Quattro MKII gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
