Benutzeranleitung / Produktwartung SuperChassis 832S-R760 des Produzenten Supermicro
Zur Seite of 33
1.0a ® S UPER SC832/SC833 CHASSIS USER'S GUIDE MUTE RESET ! 2 1 R.
1-2 S UPER SC832/SC833 Chassis User’s Guide The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuraci.
1-3 Chapter 1: Safety Information and Technical Specifications Table of Contents Chapter I: Safety Information and Technical Specifications .......... 1 - 4 1-1. Electrical Safety Guidelines ............................................................
1-4 S UPER SC832/SC833 Chassis User’s Guide Chapter 1-Safety Information and Technical Specifications 1- 1 Electrical Safety Guidelines Warning: To avoid electrical shock, check the power cords as follows: Checking the Power Cords z Use the exact type of power cords as required.
1-5 Chapter 1: Safety Information and Technical Specifications Use rubber mats specifically designed as electrical insulators when working with computer systems. The power supply or power cord must include a grounding plug and must be plugged into grounded outlets.
1-6 S UPER SC832/SC833 Chassis User’s Guide 1-3 ESD Safety Guidelines Use a grounded wrist strap designed to prevent static discharge. Keep all components and printed circuit boards (PCBs) in their antistatic bags until ready for use. Touch a grounded metal object before removing the board from the antistatic bag.
1-7 Chapter 1: Safety Information and Technical Specifications To avoid personal injury and property damage, please carefully follow all the safety steps listed below: Before accessing the chassis: 1. Turn off all peripheral devices connected to the SC832/SC833.
1-8 S UPER SC832/SC833 Chassis User’s Guide Before installing the chassis into a rack: 1. Make sure that the rack is securely anchored onto a unmovable surface or structure before installing the chassis into the rack. 2. Unplug the power cord(s) of the rack before installing the chassis into the rack.
1-9 Chapter 1: Safety Information and Technical Specifications A. The SC832/SC833 chassis contains the following: The SC832 chassis: 1-6 Packing List and the SC832/SC833 Specifications &RPSRQHQW.
1-10 S UPER SC832/SC833 Chassis User’s Guide D. The Power Supply Specifications of the SC832/SC833 The Accessory box contains the following: C. The Rail Packaging contains the following: Rail Packaging contains: B. The Accessory Box and the Rail Packaging contain the following: Power supply spec 760W series 550W Series Mfr.
1-11 Chapter 1: Safety Information and Technical Specifications E. The Serial ATA Back Panel (*SC832/SC833T Only) E-1 Jumper Settings and Pin Definitions E-2 Jumper Setting Locations A B F E C D BUZZE.
1-12 S UPER SC832/SC833 Chassis User’s Guide F. The SCSI Back Panel (*SC832/SC833S Only) F-1 Jumper Settings and Pin Definitions F-2 Jumper Setting Locations A D C B BUZZER RESET FAN#3 JP43 FAN#2 JP.
1-13 Chapter 1: Safety Information and Technical Specifications F-3 SCSI (Super) GEM Driver Installation (*for Windows OS) (*Note: This driver is not necessary for other Operating Systems. If you have two SCA backplanes, you will need to install the driver twice.
1-14 S UPER SC832/SC833 Chassis User’s Guide Notes.
2-1 Chapter 2: Chassis Description and Installation Instructions 2-1 Chassis Description A. Contents of the Accessory Kit: The following items are included in the Accessory Kit: Chapter 2: Chassis Description and Installation Instructions G H F F. Flat head M4 x 4 mm [0.
2-2 S UPER SC832/SC833 Chassis User’s Guide MUTE RESET ! 2 1 R B. Chassis Front View and the Front Control Panel LED Panel LED Button Definitions L. System Alert/Power Failure K. Overheat J. LAN2 I. LAN1 H. HDD Activity G. Power Indicator F. Alarm Reset (*Note) E.
2-3 Chapter 2: Chassis Description and Installation Instructions LED Button Descriptions /('%XWWRQ &RORU &RQGLWLRQ 'HVFULSWLRQ *UHHQ 2Q 6VWHP2Q 3RZHU .
2-4 S UPER SC832/SC833 Chassis User’s Guide C. Chassis Rear View and the Back Panel *I/O Back Panel Back Panel I/O Port Definitions E. Keyboard & Mouse SC832/SC833 Chassis Rear View Back Panel Devices A. Power Supply Modules (3) (*760W only) B. Back Panel I/O Ports C.
2-5 Chapter 2: Chassis Description and Installation Instructions Power Module LED Descriptions &RORU&RQGLWLRQ 'HVFULSWLRQ *UHHQ 3RZHU6XSSO'&2Q $PEHU.
2-6 S UPER SC832/SC833 Chassis User’s Guide B. Tools needed 2-2 Chassis Installation A. Important Safety Guidelines Stop This product shall only be accessed, assembled and serviced by technically qualified personnel or technicians.
2-7 Chapter 2: Chassis Description and Installation Instructions C. Accessing the SCA Drive Tray and Installing a HDD To install the SCA drive into the chassis, you need to first remove the SCA drive tray from the chassis.
2-8 S UPER SC832/SC833 Chassis User’s Guide D. Removing the Top Cover of the SC832/SC833 Chassis Before installing any components, replacing chassis fans or accessing the motherboard, you will first need to remove the top cover. Procedures 1. Press the release tabs to release the cover from its locking position.
2-9 Chapter 2: Chassis Description and Installation Instructions E. Accessing the Front Chassis Fans Procedures 1. Press the release tab located on the left side of the front chassis fan (when facing the front side of the fan) to release the chassis fan from its locking position as shown in the picture below: 2.
2-10 S UPER SC832/SC833 Chassis User’s Guide F-1. Accessing the 760W Power Supply (*For Triple Redundant Power Supply-3xPWS-0050M) Procedures 1. Locate the release tab on the left side of the power supply. 2. Push the release tab to the right to release the power supply from its locking position as shown below: 3.
2-11 Chapter 2: Chassis Description and Installation Instructions F-2. Accessing the 550W-Power Supply (*For Single PWS-0047) Procedures 1. Unscrew the screws to remove the metal plate.
2-12 S UPER SC832/SC833 Chassis User’s Guide ! Warning: For proper cooling, please be sure to install the air shroud and all the chassis covers before you operate the system. G. Installing the Air Shrouds AAa The SC832/833 chassis and the locations of the Large and Small Air Shrouds A B C D E E A.
2-13 Chapter 2: Chassis Description and Installation Instructions Procedures 2. Locate the six tabs (labelled J, K, L, M, N, and O) on the Small Air Shroud and the six corresponding holes (marked as j, k, l, m, n, and o) on the chassis as shown in the pictures below.
2-14 S UPER SC832/SC833 Chassis User’s Guide II. Installing the Large Air Shroud Procedures 1. Remove all the rear fans from the chassis if you have not done so. You can remove a rear fan from the chassis by pressing the release tab on the upper right corner of the fan and pulling the fan out of the chassis.
2-15 Chapter 2: Chassis Description and Installation Instructions H. Installing the Motherboard Be sue to disconnect the power supply before accessing or installing the mother- board into the chassis.
2-16 S UPER SC832/SC833 Chassis User’s Guide 3. Secure the motherboard to the chassis with Type A(6-32) screws as shown above. (*Please refer to Page 2-1 MB kit for the Type A screw.) 4. Secure the CPU heatsink mechanism to the motherboard. 2. Install standoffs to all the remaining mounting holes on the motherboard.
2-17 Chapter 2: Chassis Description and Installation Instructions Press the Locking Tab I. Installing Chassis Rails Please make sure that the chassis covers and chassis rails are installed on the chassis before you install the chassis into the rack. Procedures to Install Chassis Rails 2.
2-18 S UPER SC832/SC833 Chassis User’s Guide 3. Locate the five rail buttons on each side of the chassis and locate the five corresponding holes on each of the inner rail.
2-19 Chapter 2: Chassis Description and Installation Instructions J. Rack Installation After you have installed the inner rails on the chassis, you are ready to install the outer rails of rail assemblies to the rack. (* The rails are designed to fit in the racks with the depth of 28" to 33".
Ein wichtiger Punkt beim Kauf des Geräts Supermicro SuperChassis 832S-R760 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Supermicro SuperChassis 832S-R760 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Supermicro SuperChassis 832S-R760 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Supermicro SuperChassis 832S-R760 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Supermicro SuperChassis 832S-R760 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Supermicro SuperChassis 832S-R760 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Supermicro SuperChassis 832S-R760 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Supermicro SuperChassis 832S-R760. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Supermicro SuperChassis 832S-R760 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
