Benutzeranleitung / Produktwartung 5015A-EHF-D525 des Produzenten Supermicro
Zur Seite of 90
® S UPER USER’S MANUAL Revision 1.0 S UPER S ER VER 5015A-EHF-D525.
The information in this User ’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 5015A-EHF- D525. Installation and maintainance should be performed by experienced techni- cians only .
S UPER S ERVER 5015A-EHF-D525 User's Manual iv Chapter 4: System Safety Y ou should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 5015A-EHF-D525.
v Preface Notes.
vi S UPER S ERVER 5015A-EHF-D525 User's Manual T able of Contents Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Motherboard Features .........
vii T able of Contents HDD ................................................................................................................. 3-2 Power ....................................................................................................
viii S UPER S ERVER 5015A-EHF-D525 User's Manual SA T A DOM Power .................................................................................... 5-13 Power SMB I 2 C Connector ................................................................
ix 7-2 Main Setup ...................................................................................................... 7-2 7-3 Advanced Setup Con fi gurations...................................................................... 7-4 7-4 Security Settings .
S UPER S ERVER 5015A-EHF-D525 User's Manual Notes x.
Chapter 1 Introduction 1-1 Overview The Supermicro SuperServer 5015A-EHF-D525 is a single processor , 1U rack- mount server . The 5015A-EHF-D525 is comprised of two main subsystems: the SC502L-200B chassis and the X7SPE-HF-D525 motherboard.
1-2 S UPER S ERVER 5015A-EHF-D525 User's Manual 1-2 Motherboard Features At the heart of the SuperServer 5015A-EHF-D525 is the X7SPE-HF-D525, a single processor , low-power motherboard based upon Intel's A TOM D525 + ICH9R chipset. Below are the main features of the X7SPE-HF-D525.
Chapter 1: Introduction 1-3 Figure 1-1. Intel Atom D525 + ICH9R Chipset: System Block Diagram Note: This is a general block diagram. Please see Chapter 5 for details.
1-4 S UPER S ERVER 5015A-EHF-D525 User's Manual 1-3 Server Chassis Features The following is a general outline of the main features of the SC502L-200B 1U mini rackmount server chassis. System Power The SC502L-200B chassis includes a single 200W power supply .
Chapter 1: Introduction 1-5 1-4 Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
1-6 S UPER S ERVER 5015A-EHF-D525 User's Manual Notes.
Chapter 2: Server Installation 2-1 Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 5015A-EHF- D525 up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time.
2-2 S UPER S ERVER 5015A-EHF-D525 User's Manual Leave approximately 30 inches of clearance in the back of the rack to allow for • suf fi cient air fl ow and ease in servicing. This product is for installation only in a Restricted Access Location (dedicated • equipment rooms, service closets, etc.
Chapter 2: Server Installation 2-3 Always keep the rack's front door and all panels and components on the servers • closed when not servicing to maintain proper cooling.
2-4 S UPER S ERVER 5015A-EHF-D525 User's Manual 2-4 Rack Mounting Instructions This section provides information on installing the SC502 chassis into a rack unit There are a variety of rack units on the market, which may mean the assembly procedure will differ slightly .
Chapter 2: Server Installation 2-5 Figure 2-2. Installing the Chassis into a T elco Rack Installing into a T elco Rack The SC502 supports T elco Rack installation. The SC502 chassis compact design allows the chassis to be installed into a T elco rack without the use of rails.
2-6 S UPER S ERVER 5015A-EHF-D525 User's Manual 2-5 Checking the Motherboard Setup After you install the 5015A-EHF-D525 in the rack, you will need to open the unit to make sure the motherboard is properly installed and all the connections have been made.
Chapter 2: Server Installation 2-7 Figure 2-3. Accessing the Inside of the System 1 2 1 3 1 2 1 2.
2-8 S UPER S ERVER 5015A-EHF-D525 User's Manual 2-6 Checking the Drive Bay Setup Next, you should check to make sure the drives have been properly installed and all essential connections have been made. Checking the Drives Depending upon your system's con fi guration, your system may have one or 1.
Chapter 3: System Interface 3-1 Chapter 3 System Interface 3-1 Overview There are several LEDs on the control panel to keep you constantly informed of the overall status of the system as well as the activity and health of speci fi c components. There are also two buttons on the control panel.
3-2 S UPER S ERVER 5015A-EHF-D525 User's Manual Overheat When this LED is on it indicates an overheat condition, which may be caused by cables obstructing the air fl ow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally .
Chapter 3: System Interface 3-3 Power Indicates power is being supplied to the system's power supply units. This LED should normally be illuminated when the system is operating.
3-4 S UPER S ERVER 5015A-EHF-D525 User's Manual Notes.
Chapter 4: System Safety 4-1 Chapter 4 System Safety 4-1 Electrical Safety Precautions ! Basic electrical safety precautions should be followed to protect yourself from harm and the SuperServer 5015A-.
S UPER S ERVER 5015A-EHF-D525 User's Manual 4-2 4-2 General Safety Precautions Follow these rules to ensure general safety: Keep the area around the 5015A-EHF-D525 clean and free of clutter . • The 5015A-EHF-D525 weighs approximately 10 lbs (4.
Chapter 4: System Safety 4-3 4-3 ESD Precautions Electrostatic Discharge (ESD) is generated by two objects with different electrical charges coming into contact with each other . An electrical discharge is created to neutralize this difference, which can damage electronic com ponents and printed circuit boards.
S UPER S ERVER 5015A-EHF-D525 User's Manual 4-4 4-4 Operating Precautions Care must be taken to assure that the chassis cover is in place when the 5015A- EHF-D525 is operating to assure proper cooling. Out of warranty damage to the system can occur if this practice is not strictly followed.
Chapter 5: Advanced Motherboard Setup 5-1 Chapter 5 Advanced Motherboard Setup This chapter covers the steps required to install the X7SPE-HF-D525 motherboard into the chassis, connect the data and power cables and install add-on cards. All motherboard jumpers and connections are also described.
5-2 S UPER S ERVER 5015A-EHF-D525 User's Manual Unpacking The motherboard is shipped in antistatic packaging to avoid electrical static dis- charge.
Chapter 5: Advanced Motherboard Setup 5-3 5-3 Connecting Cables Now that the motherboard is installed, the next step is to connect the cables to the board.
5-4 S UPER S ERVER 5015A-EHF-D525 User's Manual 5-4 I/O Ports The I/O ports are color coded in conformance with the PC 99 speci fi cation. See Figure 5-2 below for the colors and locations of the various I/O ports. Figure 5-1. Control Panel Header Pins Figure 5-2.
Chapter 5: Advanced Motherboard Setup 5-5 5-5 Onboard Processor The Intel Atom processor is soldered directly onto the motherboard. Installing and removing the processor is not required. A small active heatsink sits on the proces- sor to keep it cool.
5-6 S UPER S ERVER 5015A-EHF-D525 User's Manual Figure 5-3. DIMM Installation Position the SO-DIMM mod- 1. ule's bottom key so that it aligns with the receptive point on the slot. Insert the SO-DIMM module 2. vertically at about a 45 degree angle.
Chapter 5: Advanced Motherboard Setup 5-7 5-7 Adding PCI Expansion Cards The SC502L-200B chassis can accommodate one full-height, half-length PCI- Express expansion card (a PCI-E x4 card in a x16 slot). Installing an Expansion Card After powering down the system, remove the PCI slot shield.
5-8 S UPER S ERVER 5015A-EHF-D525 User's Manual Figure 5-4. X7SPE-HF-D525 Layout 5-8 Motherboard Details Note: Jumpers not indicated are for test purposes only .
Chapter 5: Advanced Motherboard Setup 5-9 Number Connector Description 1 KB/Mouse PS/2 Keyboard/Mouse 2, 3 USB1/2 Back Panel USB Ports 4 COM1 Back Panel Serial Port 5 VGA Video/Graphics Port 6 LAN1 RJ45 Connector for LAN1 7 LAN2 RJ45 Connector for LAN2 15 JL1 Chassis Intrusion Header 18 JBA T1 Onboard Battery 19 JPCIE1 PCI-E 1.
5-10 S UPER S ERVER 5015A-EHF-D525 User's Manual Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. T o turn off the power when set to suspend mode, press the button for at least 4 seconds.
Chapter 5: Advanced Motherboard Setup 5-1 1 Reset Button The reset button (from the computer chassis) connects to pins 3 and 4 of JF1. See the table on the right for pin de fi nitions. Reset Button Pin De fi nitions (JF1) Pin# De fi nition 3 Reset 4 Ground Power Fail LED Th e Power Fail LE D co nne ct io n is lo ca ted on p ins 5 an d 6 of JF1 .
5-12 S UPER S ERVER 5015A-EHF-D525 User's Manual Fan Headers The X7SPE-HF-D525 has two fan headers. Fan1 is the CPU fan and Fan2 is for the system cooling fan. These fans are 4-pin fan headers. However , Pins 1~3 of the fan head- ers are backward compatible with the traditional 3-pin fans.
Chapter 5: Advanced Motherboard Setup 5-13 Chassis Intrusion A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable from the chassis to inform you of a chassis intrusion when the chassis is opened.
5-14 S UPER S ERVER 5015A-EHF-D525 User's Manual SGPIO Header Pin De fi nitions Pin# De fi nition Pin De fi nition 1N C 2 N C 3 Ground 4 DA T A Out 5 Load 6 Ground 7 Clock 8 NC T -SGPIO 0/1 Headers T wo T -SGPIO (Serial-Link General Purpose Input/Output) headers are located near the SA T A connectors on the motherboard.
Chapter 5: Advanced Motherboard Setup 5-15 Universal Serial Bus (USB) Four Universal Serial Bus ports (USB1/2/3/4) are located on the I/O backpanel. Additionally , one T ype A USB port (USB10) and fi ve USB headers (USB5/6, 7/8, 9) are pro- vided on the motherboard to provide front chassis access (cables are not included).
5-16 S UPER S ERVER 5015A-EHF-D525 User's Manual 5-10 Jumper Settings Explanation of Jumpers T o modify the operation of the mother- board, jumpers can be used to choose between optional settings. Jumpers create shorts between two pins to change the function of the connector .
Chapter 5: Advanced Motherboard Setup 5-17 SMB (I 2 C) Bus to PCI Slots Jumpers JI 2 C1 and J I 2 C2 all ow you to c onn ec t th e Sys tem M ana gem ent Bus (SMB) to t he PC I - E PC I slot . Th e def ault s et ti ng is D is abl ed. S ee t abl e on t he r ig ht fo r jum per s et ti ngs .
5-18 S UPER S ERVER 5015A-EHF-D525 User's Manual COM3 Redirection Select (OEM option) JPC3 allows selection between RS232 or TTL for COM3 redirection.
Chapter 5: Advanced Motherboard Setup 5-19 5-1 1 Onboard Indicators LAN1/2 LEDs The Ethernet ports (located beside the VGA port) have two LEDs. On each port, the yellow LED indicates activity while the other LED may be green, amber or off to indicate the speed of the connection.
5-20 S UPER S ERVER 5015A-EHF-D525 User's Manual 5-13 Installing Software After the hardware has been installed, you should fi rst install the operating system and then the drivers. The necessary drivers are all included on the Supermicro CDs that came packaged with your motherboard.
Chapter 5: Advanced Motherboard Setup 5-21 Supero Doctor III The Supero Doctor III program is a web-based management tool that supports remote management capability . It includes Remote and Local Management tools. The local management is called SD III Client.
5-22 S UPER S ERVER 5015A-EHF-D525 User's Manual Note: SD III Software Revision 1.0 can be downloaded from our Web Site at: ftp://ftp. supermicro.com/utility/Supero_Doctor_III/. Y ou can also download the SDIII User's Guide at: <http://www .
Chapter 6: Advanced Chassis Setup 6-1 Chapter 6 Advanced Chassis Setup This chapter covers the steps required to install components and perform main- tenance on the SC502L chassis. For component installation, follow the steps in the order given to eliminate the most common problems encountered.
6-2 S UPER S ERVER 5015A-EHF-D525 User's Manual Figure 6-2. Chassis Rear View 6-2 Control Panel The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system control buttons and status indicators.
Chapter 6: Advanced Chassis Setup 6-3 6-3 System Fans The SC502L is a fan-less chassis, which results in an extremely quiet and energy- ef fi cient operation. The only fan in the system is located on the heatsink for the embedded processor . 6-4 Drive Bay Installation/Removal Installling a 3.
6-4 S UPER S ERVER 5015A-EHF-D525 User's Manual The 3.5" hard drive screws directly into the chassis The 2.5" hard drives (1) must be installed in the (optional) bracket (2) before they are screwed into the chassis. 1 1 1 2 Figure 6-3. Installing a 3.
Chapter 6: Advanced Chassis Setup 6-5 6-5 Power Supply The SC502L-200B chassis has a single 200 watt power supply . This power supply is auto-switching capable.
6-6 S UPER S ERVER 5015A-EHF-D525 User's Manual Figure 6-5. Installing the Power Supply Power Supply Mounting Thru Holes Rear Mounting Screws Bottom Mounting Screws.
Chapter 7: BIOS 7-1 Chapter 7 BIOS 7-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X7SPE-HF-D525. The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens.
7-2 S UPER S ERVER 5015A-EHF-D525 User's Manual How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility .
Chapter 7: BIOS 7-3 System Overview: The following BIOS information will be displayed: System Time/System Date Use this option to change the system time and date. Highlight System Time or Sys- tem Date using the arrow keys. Enter new values through the keyboard.
7-4 S UPER S ERVER 5015A-EHF-D525 User's Manual 7-3 Advanced Setup Con fi gurations Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items: X BOOT Feature Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot.
Chapter 7: BIOS 7-5 Bootup Num-Lock Thi s feat ure s ele ct s th e Power- on st ate fo r Num loc k key . T he opt io ns are O f f and On . PS/2 Mouse Support Th is feat ure e nab les s upp or t fo r the P S/ 2 mou se. T he opt io ns ar e Di sab led , Enabled and Aut o.
7-6 S UPER S ERVER 5015A-EHF-D525 User's Manual Standby Power in S5 This feature supplies standby power while in S5 (sleep mode). Set this feature to Disabled to comply with EuP requirements, Enable this feature to activate wake-up capability while in sleep mode.
Chapter 7: BIOS 7-7 X Advanced Chipset Control The items included in the Advanced Settings submenu are listed below . X Northbridge Con fi guration DRAM Frequency This option allows the user to select the desired frequency setting for the onboard memory modules.
7-8 S UPER S ERVER 5015A-EHF-D525 User's Manual Active State Power Management Select Enabled to start Active-State Power Management for signal transactions between L0 and L1 Links on the PCI Express Bus. This maximizes power-saving and transaction speed.
Chapter 7: BIOS 7-9 SA T A#2 Con fi guration (Available if IDE is enabled under "Con fi gure SA T A#1 as" above) Selecting Enhanced will set SA T A#2 to native SA T A mode.
7-10 S UPER S ERVER 5015A-EHF-D525 User's Manual Select Auto to allow the AMI BIOS to automatically detect the PIO mode. Use this value if the IDE disk drive support cannot be determined. Select 0 to allow the AMI BIOS to use PIO mode 0. It has a data transfer rate of 3.
Chapter 7: BIOS 7-1 1 Select UDMA4 to allow the BIOS to use Ultra DMA mode 4 . It has a data transfer rate of 100 MBs. The options are Auto , SWDMAn, MWDMAn, and UDMAn. S.M.A.R.T . For Hard disk drives Self-Monitoring Analysis and Reporting T echnology (SMART) can help predict impending drive failures.
7-12 S UPER S ERVER 5015A-EHF-D525 User's Manual PCI Slot 1 Use this feature to enable or disable PCI slot Option ROMs. The options are Dis- abled and Enabled. Load Onboard LAN 1 Option ROM/ Load Onboard LAN 2 Option ROM Select Enabled to load the onboard LAN Option ROM for the LAN port as speci fi ed.
Chapter 7: BIOS 7-13 Flow Control This feature allows the user to set the fl ow control for Console Redirection. The options are None , Hardware, and Software. Redirection After BIOS POST Se lec t Di sab le d to tur n of f C on sol e Redi rec ti on af te r Power- O n Sel f- T est (PO ST ).
7-14 S UPER S ERVER 5015A-EHF-D525 User's Manual X Hardware Health Con fi guration This feature allows the user to monitor Hardware Health of the system and review the status of each item when displayed.
Chapter 7: BIOS 7-15 User intervention: No action is required. However , consider checking the CPU fans and the chassis ventilation for blockage. High – The processor is running hot.
7-16 S UPER S ERVER 5015A-EHF-D525 User's Manual Fan Speed Control Modes This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase for effective system cooling.
Chapter 7: BIOS 7-17 ACPI Aware O/S Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System. Otherwise, disable this feature.
7-18 S UPER S ERVER 5015A-EHF-D525 User's Manual X IPMI Con fi guration Intelligent Platform Management Interface (IPMI) is a set of common interfaces that IT administrators can use to monitor system health and to manage the system as a whole. For more information on the IPMI speci fi cations, please visit Intel's website at www .
Chapter 7: BIOS 7-19 IP Address - Enter the IP address for this machine. This should be in decimal and in dotted quad form (i.e., 192.168.10.253). The value of each three-digit number separated by dots should not exceed 255. Subnet Mask - Subnet masks tell the network which subnet this machine belongs to.
7-20 S UPER S ERVER 5015A-EHF-D525 User's Manual 7-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervisor password must be set fi rst. Supervisor Password This item indicates if a supervisor password has been entered for the system.
Chapter 7: BIOS 7-21 Change User Password Select this feature and press <Enter> to access the submenu , and then type in a new User Password. Clear User Password (A vailable only if User Password has been set) Password Check Available options are Setup and Always.
7-22 S UPER S ERVER 5015A-EHF-D525 User's Manual X Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot Device. The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 5th boot device and Disabled.
Chapter 7: BIOS 7-23 X Removable Drives This feature allows the user to specify the boot sequence from available Removable Drives. The settings are 1st boot device, 2nd boot device, and Disabled.
7-24 S UPER S ERVER 5015A-EHF-D525 User's Manual fi guration parameters can take ef fect. Select Save Changes and Exit from the Exit menu and press <Enter>. Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system con fi guration, and reboot the computer .
Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes This section lists POST (Power On Self T est) error beep codes for the AMI BIOS. POST error beep codes are divided into two categories: recoverable and terminal. This section lists Beep Codes for recoverable POST errors.
A-2 S UPER S ERVER 5015A-EHF-D525 User's Manual Notes.
B-1 Appendix B: System Speci fi cations Appendix B System Speci fi cations Processors Embedded single Intel® Atom™ D525 dual-core 1.8 GHz processor Chipset Intel Atom D525 + ICH9R chipset BIOS 8 .
B-2 S UPER S ERVER 5015A-EHF-D525 User's Manual System Input Requirements AC Input V oltage: 100-240 V AC (auto-range) Rated Input Current: 3A max. Rated Input Frequency: 50 to 60 Hz Power Supply Rated Output Power: 200W (Part# PWS-202-1H) Rated Output V oltages: +3.
B-3 Appendix B: System Speci fi cations Notes.
B-4 S UPER S ERVER 5015A-EHF-D525 User's Manual (continued from front) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclea.
Ein wichtiger Punkt beim Kauf des Geräts Supermicro 5015A-EHF-D525 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Supermicro 5015A-EHF-D525 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Supermicro 5015A-EHF-D525 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Supermicro 5015A-EHF-D525 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Supermicro 5015A-EHF-D525 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Supermicro 5015A-EHF-D525 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Supermicro 5015A-EHF-D525 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Supermicro 5015A-EHF-D525. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Supermicro 5015A-EHF-D525 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
