Benutzeranleitung / Produktwartung X8SIL-V des Produzenten SUPER MICRO Computer
Zur Seite of 102
USER’S MANUAL Revision 1.2a X8SIL-F X8SIL X8SIL-V.
Manual Revision 1.2a Release Date: August 30, 2013 Unless you request and receive written permission from Super Micro Computer , Inc., you may not copy any part of this document.
Preface This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the X8SIL/X8SIL-F/X8SIL-V motherboard. About This Motherboard The X8SIL/X8SIL-F/X8SIL-V supports the Intel® Xeon® 3400 series pro - cessors in an LGA 1 156 socket.
Contacting Supermicro v Contacting Supermicro Headquarters Address: Super Micro Computer , Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. T el: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.
vi X8SIL/X8SIL-F/X8SIL-V User ’s Manual T able of Contents Preface Chapter 1 Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Chipset Overview ...............
vii T able of Contents Front Control Panel Pin Denitions ............................................................... 2-23 Power LED .............................................................................................. 2-23 HDD LED ....
X8SIL/X8SIL-F/X8SIL-V User ’s Manual viii 3-3 Frequently Asked Questions ........................................................................... 3-3 3-4 Battery Removal and Installation ...........................................................
Chapter 1: Introduction 1-1 Chapter 1 Introduction 1-1 Overview Checklist Congratulations on purchasing your computer motherboard from an acknowledged leader in the industry . Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
1-2 X8SIL/X8SIL-F/X8SIL-V User ’s Manual Motherboard Image (X8SIL-F Shown) Note : All graphics shown in this manual were based upon the latest PCB Revision available at the time of publishing of the manual. The motherboard you've received may or may not look exactly the same as the graphics shown in this manual.
Chapter 1: Introduction 1-3 Motherboard Layout Important Notes to the User • See Chapter 2 for detailed information on jumpers, I/O ports and JF1 front panel connections. • " " indicates the location of "Pin 1". • Jumpers not indicated are for testing only .
1-4 X8SIL/X8SIL-F/X8SIL-V User ’s Manual X8SIL/X8SIL-F/X8SIL-V Quick Reference 1 1 X8SIL/X8SIL-F/X8SIL-V Jumpers Number Jumper Description Default 38 JPUSB1 BP USB0/1 W ake-up Pins 1-2 (Enabled) 42 JBT1 CMOS Clear (See Chpt. 2) 40 JPES Energy Saving Feature Pins 2-3 (Disabled) 13,14 JI 2 C1/JI 2 C2 SMB to PCI Slots (See Chpt.
Chapter 1: Introduction 1-5 X8SIL/X8SIL-F/X8SIL-V LED Indicators Number LED Description Color/State Status 43 LE3 Unsupported Memory Installed Indicator Y ellow: Blinking Unsupported Memory Installed .
1-6 X8SIL/X8SIL-F/X8SIL-V User ’s Manual Motherboard Features CPU Single Intel® Xeon® 3400 series processor in an LGA1 156 socket. Memory Four (4) 240-pin, DDR3 SDRAM DIMM sockets with sup - port for up to 16GB of UDIMM or up to 32GB of RDIMM memory (ECC/DDR3 1333/1066/800 MHz memory only .
Chapter 1: Introduction 1-7 I/O Devices (Continued) USB Devices (X8SIL-F/X8SIL-V Only) T wo (2) USB ports on the rear IO panel Four (4) USB header connectors for front access One (1) T ype A internal .
1-8 X8SIL/X8SIL-F/X8SIL-V User ’s Manual CD Utilities BIOS ash upgrade utility Drivers and software for Intel® 3400/3420 chipset utilities Other ROHS 6/6 (Full Compliance, Lead Free) Dimensions Micro A TX form factor , 9.
Chapter 1: Introduction 1-9 X8SIL/X8SIL-F/X8SIL-V System Block Diagram Note: This is a general block diagram and may not exactly represent the features on your motherboard. See the Motherboard Features pages for the actual specications of each motherboard.
1-10 X8SIL/X8SIL-F/X8SIL-V User ’s Manual 1-2 Chipset Overview The X8 SI L / X8 SI L - F/X8 SI L -V suppo r t s the Intel® Xeon® 3400 processor series.
Chapter 1: Introduction 1-1 1 1-3 PC Health Monitoring This section describes the PC health monitoring features of the X8SIL/X8SIL-F/ X8SIL-V . These features are supported by an onboard System Hardware Monitor chip.
1-12 X8SIL/X8SIL-F/X8SIL-V User ’s Manual Slow Blinking LED for Suspend-State Indicator When the CPU goes into a suspend state, the chassis power LED will start blink - ing to indicate that the CPU is in the suspend mode. When the user presses any key , the CPU will wake-up and the LED indicator will automatically stop blinking and remain on.
Chapter 1: Introduction 1-13 1-6 Super I/O The disk drive adapter functions of the Super I/O chip include a oppy disk drive controller that is compatible with industry standard 82077/765, a data se.
1-14 X8SIL/X8SIL-F/X8SIL-V User ’s Manual 1-8 Overview of the Nuvoton BMC Controller The Nuvoton SM WPCM150 is a combined Baseboard Management Controller and 2D/VGA-compatible Graphics Core with PCI interface, Virtual Media and Keyboard, and a Keyboard/Video/Mouse Redirection (KVMR) module.
Chapter 2: Installation 2-1 Chapter 2 Installation 2-1 Static-Sensitive Devices Electrostatic-Discharge (ESD) can damage electronic com ponents. T o prevent dam - age to your system board, it is important to handle it very carefully . The following measures are generally sufcient to protect your equipment from ESD.
2-2 X8SIL/X8SIL-F/X8SIL-V User's Manual 2-2 Processor and Heatsink Installation W arning : When handling the processor package, avoid placing direct pressure on the label area of the fan. Notes: Always connect the power cord last and always remove it before adding, removing or changing any hardware components.
Chapter 2: Installation 2-3 Align the CPU key that is the semi-circle cutouts against the socket keys. Once aligned, carefully lower the CPU straight down to the socket. (Do not drop the CPU on the socket. Do not move the CPU horizontally or vertically .
2-4 X8SIL/X8SIL-F/X8SIL-V User's Manual W arning: The CPU will only seat inside the socket in one direction. Make sure it is properly inserted before closing the load plate. If it doesn't close properly , do not force it as it may damage your CPU.
Chapter 2: Installation 2-5 Do not apply any thermal grease to the heatsink or the CPU die -- the required amount has already been applied. Installing a Passive CPU Heatsink Screw#1 Screw#2 Motherboard Mounting Holes Finish the installation by fully tightening all four screws.
2-6 X8SIL/X8SIL-F/X8SIL-V User's Manual W arning: We do not recommend that the CPU or the heatsink be removed. However , if you do need to uninstall the heatsink, please follow the instruc - tions below to uninstall the heatsink to prevent damage done to the CPU or the CPU socket.
Chapter 2: Installation 2-7 Thermal Grease Heatsink Fins Locate the CPU Fan power connector on the motherboard. (Refer to the layout on the right for the CPU Fan location.) Position the heatsink so that the heatsink fan wires are closest to the CPU fan power connector and are not interfered with other components.
2-8 X8SIL/X8SIL-F/X8SIL-V User's Manual Align the four heatsink fasteners with the mounting holes on the moth - erboard. Gently push the pairs of diagonal fasteners (#1 & #2, and #3 & #4) into the mounting holes until you hear a click. (Note: Make sure to orient each fastener so that the narrow end of the groove is pointing outward.
Chapter 2: Installation 2-9 Unplug the power cord from the power supply . Disconnect the heatsink fan wires from the CPU fan header . Use your nger tips to gently press on the fastener cap and turn it counter - clockwise to make a 1/4 (90 0 ) turn, and then pull the fastener upward to loosen it.
2-10 X8SIL/X8SIL-F/X8SIL-V User's Manual 2-3 Installing DDR3 Memory Note : Check the Supermicro web site for recommended memory modules. CAUTION Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. DIMM Installation 1.
Chapter 2: Installation 2-1 1 MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T -SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 JPL1 1 JPL2 JPG.
2-12 X8SIL/X8SIL-F/X8SIL-V User's Manual Insert the DIMM mod - ule vertically and press down until the module snaps into place. T o Remove: Use your thumbs to gently push the Lock/ Release tabs near both ends of the module. This should release it from the slot.
Chapter 2: Installation 2-13 Note: D ue to me mo r y al lo cat io n to syste m devi c es, t he am ount of m em or y t hat rem ains avail abl e for op er ati ona l use wi ll be re duc ed w hen 4 G B of R A M is used. The reduction in memory avail ability is dis propor tional.
2-14 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-15 Installation Instructions Install the I/O shield into the chassis. Locate the mounting holes on the motherboard. Refer to the layout on the previous page for mounting hole locations. Locate the matching mounting holes on the chassis.
2-16 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-17 MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 JPL1 1 JPL2 JPG1 .
2-18 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-19 Ethernet Ports T wo Ethernet ports (LAN1/LAN2) are located next to the VGA port on the I/O Backpanel. In addition, an IPMI Dedi - cated LAN is also located above USB 0/1 ports on the X8SIL-F to provide a dedicated network connection for IPMI 2.
2-20 X8SIL/X8SIL-F/X8SIL-V User's Manual 2 Serial Ports A C O M Po r t is l oc ate d on the I /O b a c k p a n e l a n d a S e r i a l p o r t i s l o c a t e d nex t to F ro nt Pan el USB 2 / 3 to p ro - vid e fr ont ac c es s. Se e th e tab le o n the r ight fo r p in de nit io ns.
Chapter 2: Installation 2-21 1. VGA Video Connector A Video (VGA) connector is located next to the COM Port on the I/O backpanel. This connector is used to provide video and CRT display .
2-22 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-23 Front Control Panel Pin Denitions Power LED The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table on the right for pin denitions. Power LED Pin Denitions (JF1) Pin# Denition 15 +5V 16 Ground A.
2-24 X8SIL/X8SIL-F/X8SIL-V User's Manual Po we r Bu tto n OH/Fan Fail LE D 1 NIC1 LE D Re se t Butt on 2 HDD LE D Po we r LE D Re se t PWR LED_Anode+ LED_Anode+ LED_Anode+ LED_Anode+ Gr ound Gr o.
Chapter 2: Installation 2-25 Power Button The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both pins will power on/off the system. This button can also be con - gured to function as a suspend button (with a setting in the BIOS - see Chapter 4).
2-26 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-27 MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 JPL1 1 JPL2 JPG1 .
2-28 X8SIL/X8SIL-F/X8SIL-V User's Manual Internal Buzzer The Internal Buzzer (SPKR1) can be used to provide audible indications for various beep codes. See the table on the right for pin denitions. A. Internal Buzzer B. Speaker Header C. TPM Header Internal Buzzer Pin Denition Pin# Denitions Pin 1 Pos.
Chapter 2: Installation 2-29 A B A. PWR LED B. PWR SMB C. DOM PWR Power Supply I 2 C Connector Power Supply (I 2 C) Connector , locat - ed at SMB_PS1 on the motherboard. This connector monitors the status of the power supply , fan and system temperature.
2-30 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-31 MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 JPL1 1 JPL2 JPG1 .
2-32 X8SIL/X8SIL-F/X8SIL-V User's Manual CMOS Clear JBT1 is used to clear CMOS. Instead of pins, this "jumper" consists of contact pads to prevent accidental clearing of CMOS. T o clear CMOS, use a metal object such as a small screwdriver to touch both pads at the same time to short the connection.
Chapter 2: Installation 2-33 B A A. VGA Enable B. Energy Saving Enable VGA Enable/Disable Jumper Settings (JPG1) Both Jumpers Denition Pins 1-2 Enabled Pins 2-3 Disabled VGA Enable JPG1 allows you to enable or disable the onboard VGA connector . The default position is on pins 1 and 2 to enable VGA.
2-34 X8SIL/X8SIL-F/X8SIL-V User's Manual MAC CO DE JPI2C JF1 JPW1 U26 J8 J6 J5 J14 1 J13 U61 T-SGPIO1 T-SGPIO2 J24 JLAN2 JLAN1 SPKR1 JBT1 JI2C1 1 JI2C2 1 LE4 LE2 LE3 LE7 1 JPB JLED1 1 1 JPUSB1 1 .
Chapter 2: Installation 2-35 LAN 1/LAN 2 LEDs T wo LAN ports (LAN 1/LAN 2) are located on the I/O backpanel of the motherboard. Each Ethernet LAN port has two LEDs. The ye l l o w LE D in d i c at e s ac t i v it y, wh i l e th e Li n k LED may be g ree n, amb er o r of f to in dic ate the s pee d of t he c onn ec ti ons .
2-36 X8SIL/X8SIL-F/X8SIL-V User's Manual Onboard PWR LED Indicator LED Settings (LE4) LED Color Denition Off System Off On System on, or System off and PWR Cable Connected Onboard Power LED An Onboard Power LED is located at LE4 on the motherboard.
Chapter 2: Installation 2-37 2-9 SA T A and Floppy Drive Connections Note the following conditions when connecting the Serial A T A and oppy disk drive cables: • Be sure to use the correct cable for each connector . Refer to Page 1-1 for cables that came with your shipment.
2-38 X8SIL/X8SIL-F/X8SIL-V User's Manual A. Floppy Floppy Connector The op py c on nec to r i s l oc ate d n ext to t he DI MM memor y ba nks o n t he mot her bo ard .
3-1 Chapter 3: Troubleshooting Chapter 3 T roubleshooting 3-1 T roubleshooting Pro cedures Use t he fo llo win g pro c edu res to t ro ubl esh oot yo ur syst em.
3-2 X8SIL/X8SIL-F/X8SIL-V User's Manual 2. Us e the s pea ker to dete r mine i f any be ep c od es exi st. ( Refer to A p pen dix A for d eta ils o n bee p c ode s.
3-3 Chapter 3: Troubleshooting 2. BI OS up gr ade s ca n be do wnl oad ed f ro m our web sit e at (http:/ /w w w.supermicro. com/support / bios/ ). Note: Not all BIOS can be ashed. Some cannot be ashed; it depends on the modications to the boot block code.
3-4 X8SIL/X8SIL-F/X8SIL-V User's Manual web site. Select your motherboard model and download the BIOS ROM le to your computer . Also, check the current BIOS revision and make sure that it is newer than your BIOS before downloading. Y ou may choose the zip le or the .
3-5 Chapter 3: Troubleshooting Answ er: T o so lve thi s is sue, di sa ble t he I PMI j ump er . A not her s ol uti on i s to u s e a U S B o p p y dr i ve i n s t e a d o f t h e o n b o a r d o p p y dr i v e . Fo r t h e I P M I ju m p e r loc at io n, pl eas e che ck C hapt er 1.
3-6 X8SIL/X8SIL-F/X8SIL-V User's Manual 3-4 Battery Removal and Installation Power off your system and unplug your power cable. 1 2 3 Using a tool such as a pen or a small screwdriver , push the battery lock outwards to unlock it. Once unlocked, the battery will pop out from the holder .
3-7 Chapter 3: Troubleshooting 3-5 Returning Merchandise for Service A rec ei pt or c opy of yo ur invoi ce m ar ked wi th t he date o f purc ha se is re qui red befo re any war r ant y se r v ic e wi ll be r end ere d. Y ou ca n obt ain s er v ic e by c alli ng your ven do r for a Ret ur ned M er ch and ise Au th or iz ati on (R M A) numb er .
3-8 X8SIL/X8SIL-F/X8SIL-V User's Manual Notes.
Chapter 4: AMI BIOS 4-1 Chapter 4 BIOS 4-1 Introduction This chapter describes the AMI BIOS Setup Utility for the X8SIL/X8SIL-F/X8SIL-V . The AMI ROM BIOS is stored in a Flash EEPROM and can be easily updated. This chapter describes the basic navigation of the AMI BIOS Setup Utility setup screens.
4-2 X8SIL/X8SIL-F/X8SIL-V How to Start the Setup Utility Normally , the only visible Power-On Self-T est (POST) routine is the memory test. As the memory is being tested, press the <Delete> key to enter the main menu of the AMI BIOS Setup Utility .
Chapter 4: AMI BIOS 4-3 System Overview: The following BIOS information will be dis played: System Time/System Date Use this option to change the system time and date. Highlight System Time or Sys - tem Date using the arrow keys. Enter new values through the keyboard.
4-4 X8SIL/X8SIL-F/X8SIL-V 4-3 Advanced Setup Congurations Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu items: BOOT Feature Quick Boot If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot.
Chapter 4: AMI BIOS 4-5 W ait For 'F1' If Error Thi s for ce s th e syste m to wait u ntil t he ' F1 ' key is pre ss ed i f an er ro r oc c ur s. Th e opti on s are D is abl ed an d Enabled . Hit 'Del' Message Display Thi s feat ure di spl ays " Pre ss D EL to r un S etup" du ri ng PO ST .
4-6 X8SIL/X8SIL-F/X8SIL-V Processor & Clock Options W arning : T ake Caution when changing the Advanced settings. An incorrect value, a very high DRAM frequency or incorrect DRAM timing may cause system to become unstable. When this occurs, revert to the default setting.
Chapter 4: AMI BIOS 4-7 Execute-Disable Bit Capability (A vailable when supported by the OS and the CPU) Set to Enabled to enable the Execute Disable Bit which will allow the processor to designate ar.
4-8 X8SIL/X8SIL-F/X8SIL-V C1 - Auto Halt. The core clock (CPU) is off. This is the most basic idle state. Some CPUs support C1E (C1 Enhanced) for lower power consumption. C2 - Stop Clock. Both the core clock (CPU) and bus clocks (I/O) are off. C3 - Deep Sleep.
Chapter 4: AMI BIOS 4-9 Route Port 80h Cycles to This feature allows the user to decide which bus to send debug information to. The options are PCI and LPC. USB Functions This feature allows the user to decide the number of onboard USB ports to be enabled.
4-10 X8SIL/X8SIL-F/X8SIL-V IDE Detect Timeout (sec) Use this feature to set the time-out value for the BIOS to detect the A T A, A T API devices installed in the system.
Chapter 4: AMI BIOS 4-1 1 Select 2 to allow the AMI BIOS to use PIO mode 2. It has a data transfer rate of 8.3 MBs. Select 3 to allow the AMI BIOS to use PIO mode 3. It has a data transfer rate of 1 1.1 MBs. Select 4 to allow the AMI BIOS to use PIO mode 4.
4-12 X8SIL/X8SIL-F/X8SIL-V tect hard disk drive support. Select Disabled to prevent the AMI BIOS from using the S.M.A.R.T . Select Enabled to allow the AMI BIOS to use the S.M.A.R.T . to support hard drive disk. The options are Disabled, Enabled, and Auto .
Chapter 4: AMI BIOS 4-13 This feature selects whether to load the iSCSI or PXE onboard LAN option ROM. The options are iSCSI and PXE . Load Onboard LAN1 Option ROM/Load Onboard LAN2 Option ROM This feature is to enable or disable the onboard option ROMs.
4-14 X8SIL/X8SIL-F/X8SIL-V Serial Port Mode This feature allows the user to set the serial port mode for Console Redirection. The options are 1 15200 8, n 1 ; 57600 8, n, 1; 38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1. Flow Control This feature allows the user to set the ow control for Console Redirection.
Chapter 4: AMI BIOS 4-15 • The Early Alarm: Select this setting if you want the CPU overheat alarm (includ - ing the LED and the buzzer) to be triggered as soon as the CPU temperature reaches the CPU overheat threshold as predened by the CPU manufacturer .
4-16 X8SIL/X8SIL-F/X8SIL-V Note: In both the alarms above, please take immediate action as shown below . See CPU Overheat Alarm to modify the above alarm settings.
Chapter 4: AMI BIOS 4-17 Fan1 ~ Fan 6 Reading This feature displays the fan speed readings from fan interfaces Fan1 through Fan5. CPU Vcore, A VCC, 3.3Vcc, 12V , V_DIMM, 5V , -12V , 3.3Vsb, and Vbat ACPI Conguration Use this feature to congure Advanced Conguration and Power Interface (ACPI) power management settings for your system.
4-18 X8SIL/X8SIL-F/X8SIL-V Headless Mode This feature is used to enable the system to function without a keyboard, monitor or mouse attached The options are Enabled and Disabled . ACPI V ersion Features The options are ACPI v1.0, ACPI v2.0 and ACPI v3.
Chapter 4: AMI BIOS 4-19 IPMI Conguration (X8SIL-F Only) Intelligent Platform Management Interface (IPMI) is a set of common interfaces that IT administrators can use to monitor system health and to manage the system as a whole. For more information on the IPMI specications, please visit Intel's website at www .
4-20 X8SIL/X8SIL-F/X8SIL-V Subnet Mask - Subnet masks tell the network which subnet this machine be - longs to. The value of each three-digit number separated by dots should not exceed 255. Gateway Address - Enter the Gateway address this machine will use (i.
Chapter 4: AMI BIOS 4-21 Intel® TXT (L T) Conguration Intel TXT Initialization Intel TXT (Trusted Execution T echnology) helps protect against software-based at - tacks and ensures protection, condentiality and integrity of data stored or created on the system.
4-22 X8SIL/X8SIL-F/X8SIL-V 4-4 Security Settings The AMI BIOS provides a Supervisor and a User password. If you use both pass - words, the Supervisor password must be set rst. Supervisor Password This item indicates if a supervisor password has been entered for the system.
Chapter 4: AMI BIOS 4-23 Use thi s featu re to co ng ure Bo ot Set ti ngs: Boot Device Priority This feature allows the user to specify the sequence of priority for the Boot Device. The settings are 1st boot device, 2nd boot device, 3rd boot device, 4th boot device, 5th boot device and Disabled.
4-24 X8SIL/X8SIL-F/X8SIL-V Select the Exit tab from the AMI BIOS Setup Utility screen to enter the Exit BIOS Setup screen. Save Changes and Exit When you have completed the system conguration changes, select this option to leave the BIOS Setup Utility and reboot the computer , so the new system con - guration parameters can take effect.
Chapter 4: AMI BIOS 4-25 Discard Changes and Exit Select this option to quit the BIOS Setup without making any permanent changes to the system conguration, and reboot the computer . Select Discard Changes and Exit from the Exit menu and press <Enter>.
4-26 X8SIL/X8SIL-F/X8SIL-V Notes.
Appendix A: POST Error Beep Codes A-1 Appendix A POST Error Beep Codes This section lists POST (Power On Self T est) error beep codes for the AMI BIOS. POST error beep codes are divided into two categories: recoverable and terminal. This section lists Beep Codes for recoverable POST errors.
A-2 X8SIL/X8SIL-F/X8SIL-V User's Manual Notes.
Appendix B: Software Installation Instructions B-1 Driver/T ool Installation Display Screen Note : Click the icons showing a hand writing on the paper to view the readme les for each item. Click a computer icon to the right of an item to install an item (from top to the bottom) one at a time.
B-2 X8SIL/X8SIL-F/X8SIL-V User's Manual SuperDoctor ® III Interface Display Screen-I (Health Information) B-2 Conguring SuperDoctor ® III The SuperDoctor® III program is a Web-based management tool that supports remote management capability .
Appendix B: Software Installation Instructions B-3 SuperDoctor ® III Interface Display Screen-II (Remote Control) Note : T he Su per D oc tor I II so f t war e and m anua l may be d own loa ded f ro m our Website at: http:/ /w w w .supermicro.com/produ cts/accessories /software/SuperDoctorIII.
B-4 X8SIL/X8SIL-F/X8SIL-V User's Manual Notes.
Appendix C: BIOS Recovery C-1 Appendix C - BIOS Recovery The recovery procedure described in this section is to be used only when advised by your Supermicro T echnical Support representative, or in cases of emergencies where the system no longer can boot due to a corrupted BIOS.
C-2 X8SIL/X8SIL-F/X8SIL-V User ’s Manual 5. When the Boot Sector Recovery Process is complete, the system will reboot automatically and you will see a checksum error on your screen.
(Disclaimer Continued) The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices, .
Ein wichtiger Punkt beim Kauf des Geräts SUPER MICRO Computer X8SIL-V (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SUPER MICRO Computer X8SIL-V noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SUPER MICRO Computer X8SIL-V - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SUPER MICRO Computer X8SIL-V reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SUPER MICRO Computer X8SIL-V erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SUPER MICRO Computer X8SIL-V besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SUPER MICRO Computer X8SIL-V verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SUPER MICRO Computer X8SIL-V. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SUPER MICRO Computer X8SIL-V gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
