Benutzeranleitung / Produktwartung SUPER des Produzenten SUPER MICRO Computer
Zur Seite of 82
® SUPER P3TDDR USER’S MANUAL Revision 1.0a S UPER.
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates.
Preface About This Manual This manual is written for system integrators, PC technicians and knowledgeable PC users. It provides information for the installation and use of the SUPER P3TDDR motherboards. The SUPER P3TDDR supports single or dual Pentium ® III FCPGA 500 MHz-1.
S UPER P3TDDR User’s Manual iv Table of Contents About This Manual ...................................................................................................... ii i Manual Organization ......................................................
v Table of Contents Wake-On-Ring ......................................................................................... 2-10 Fan Headers ........................................................................................... 2 - 1 1 Chassis Intrusion .
S UPER P3TDDR User’s Manual vi 4 -9 Exit Setup ....................................................................................................... 4-25 Appendices: Appendix A: AwardBIOS POST Messages .............................................
Chapter 1: Introduction 1-1 Introduction Chapter 1 Introduction 1 - 1 Overview Checklist Congratulations on purchasing your computer motherboard from an ac- knowledged leader in the industry. Supermicro boards are designed with the utmost attention to detail to provide you with the highest standards in quality and performance.
S UPER P3TDDR User's Manual 1-2 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: + 1 (408) 503-8008 E-mail: marketing@supermicro.com (General Information) support@supermicro.
Chapter 1: Introduction 1-3 Introduction SUPER P3TDDR Figure 1-1. SUPER P3TDDR Image.
S UPER P3TDDR User's Manual 1-4 Figure 1-2. SUPER P3TDDR Layout (not drawn to scale) S UPER P3TDDR PCI 3 SCSI LED PCI 2 ULTRA III SCSI CH B PCI 1 ULTRA III SCSI CH B ULTRA III SCSI CH A SCSI RAID.
Chapter 1: Introduction 1-5 Introduction P3TDDR Quick Reference Jumpers Description Default Setting JBT1 CMOS Clear Pins 1-2 (Normal) JPA1/2 SCSI Ch A/B Termination Open (Enabled) JPL1/2 LAN 1/2 Enabl.
S UPER P3TDDR User's Manual 1-6 VT8653T DDR Vli nk Host Nort h 552BGA VT8233 Vlink 133/10 0/ 66 M H z Host Bus 3D G rap hics Controller Pe ntium III FCPGA/PPGA CPUs PCI Slots 266 MHz Memory Memor.
Chapter 1: Introduction 1-7 Introduction Motherboard Features CPU • Single or dual Intel ® Pentium TM III FCPGA 500 MHz-1.26+ GHz proces- sors (including low power Pentium TM III processors) at Front Side (system) Bus speeds of 133/100/66 MHz Note: Please refer to the support section of our web site for a complete list of supported processors.
S UPER P3TDDR User's Manual 1-8 ACPI/PC 98 Features • Microsoft ® OnNow • Real-time clock wake-up alarm • Main switch override mechanism • External modem ring-on Onboard I/O • AIC-7899 for dual channel Ultra160 SCSI • 2 IDE bus master interfaces support UDMA/100 • 1 floppy port interface (up to 2.
Chapter 1: Introduction 1-9 Introduction 1- 2 Chipset Overview The VIA Apollo Pro 266T chipset is a high performance, cost-effective and energy-efficient chipset for the implementation of AGP/V-Link/PCI/LPC com- puter systems based on 64-bit, 370-pin Pentium III (66/100/133 MHz FSB) processors.
S UPER P3TDDR User's Manual 1-10 1-3 PC Health Monitoring This section describes the PC health monitoring features of the SUPER P3TDDR motherboard. Seven Onboard Voltage Monitors for the CPU Core, Chipset Voltage, +3.3V, ± ± ± ± ± 5V and ± ± ± ± ± 12V The onboard voltage monitor will scan these seven voltages continuously.
Chapter 1: Introduction 1-11 Introduction CPU Overheat LED and Control This feature is available when the user enables the CPU overheat warning function in the BIOS. This allows the user to define an overheat tempera- ture. When this temperature is exceeded, both the overheat fan and the warning LED are triggered.
S UPER P3TDDR User's Manual 1-12 ages the Plug and Play BIOS data structures while providing a processor architecture-independent implementation that is compatible with both Win- dows 98, Windows NT and Windows 2000.
Chapter 1: Introduction 1-13 Introduction External Modem Ring-On Wake-up events can be triggered by a device such as the external modem ringing when the system is in the SoftOff state. Note that external modem ring-on can only be used with an ATX 2.01 (or above) compliant power supply.
S UPER P3TDDR User's Manual 1-14 1-6 Super I/O The functions of the disk drive adapter for the Super I/O chip include a floppy disk drive controller that is compatible with industry standard 8207.
Chapter 2: Installation 2-1 Chapter 2 Installation 2- 1 Static-Sensitive Devices ElectroStatic Discharge (ESD) can damage electronic components. To pre- vent damage to your system board, it is important to handle it very carefully. The following measures are generally sufficient to protect your equipment from ESD.
2-2 S UPER P3TDDR User’s Manual 2-2 Processor Installation When handling the processor package, avoid placing direct pressure on the label area of the fan.
Chapter 2: Installation 2-3 2-3 Mounting the Motherboard in the Chassis All motherboards have standard mounting holes to fit different types of chassis.
2-4 S UPER P3TDDR User’s Manual Figure 2-2. Installing DDR-RAM into DIMM Slot 2-4 Installing DIMMs CAUTION Exercise extreme care when installing or removing DIMM modules to prevent any possible damage. Memory Module Installation (See Figure 2-2) 1. Insert each DDR-RAM memory module vertically into its slot.
Chapter 2: Installation 2-5 2-5 I/O Port/Control Panel Connector Locations The I/O ports are color coded in conformance with the PC99 specification to make setting up your system easier. See Figure 2-3 below for the colors and locations of the various I/O ports.
2-6 S UPER P3TDDR User’s Manual Front Control Panel JF1 contains header pins for various front control panel connectors. See Figure 2-4 for the pin definitions of the power and reset switches and the overheat, NIC1 and 2, hard disk drive and power LEDs.
Chapter 2: Installation 2-7 2-6 Connecting Cables The primary power supply connec- tor on the P3TDDR meets the SSI (Superset ATX) 24-pin specifica- tions, however, it also supports an ATX 20-pin connector. Refer to Table 2-1a for pin definitions. (Also see Figure A below for con- nector orientation).
2-8 S UPER P3TDDR User’s Manual Reset Button The Reset connector is located on pins 3 and 4 of JF1. This connec- tor attaches to the hardware reset switch on the computer case. See the table on the right for pin definitions. Power Button The PW_ON connector is located on pins 1 and 2 of JF1.
Chapter 2: Installation 2-9 Power LED The Power LED connector is lo- cated on pins 15 to 16 of JF1. See the table on the right for pin defini- tions. HDD (Hard Disk Drive) LED The IDE hard drive LED connector is located on JF1. Attach the IDE hard drive LED cable to pins 13 and 14 of JF1.
2-10 S UPER P3TDDR User’s Manual Wake-On-LAN (WOL1) The Wake-On-LAN header is des- ignated as WOL1. This function allows your computer to receive and be "woken up" by an incoming call when in the suspend state. See the table on the right for pin definitions.
Chapter 2: Installation 2-11 Fan Headers The CPU, thermal control and chassis fan headers are desig- nated CPU Fan1, CPU Fan2, Over- heat Fan, Chassis Fan1, Chassis Fan2 and Chassis Fan3, respec- tively. See the table on the right for pin definitions.
2-12 S UPER P3TDDR User’s Manual 2- 7 Jumper Settings Explanation of Jumpers To modify the operation of the motherboard, jumpers can be used to choose between optional set- tings. Jumpers create shorts be- tween two pins to change the function of the connector.
Chapter 2: Installation 2-13 CMOS Clear Refer to the table on the right for instructions on how to clear CMOS. Always remove the AC power cord from the system be- fore clearing CMOS. Note: For an ATX power supply, you must completely shut down the sys- tem, remove the AC power cord, then use JBAT1 to clear CMOS.
2-14 S UPER P3TDDR User’s Manual SCSI Enable/Disable Jumper JP2 is used to enable or dis- able the onboard SCSI. See the table on the right for jumper set- tings.
Chapter 2: Installation 2-15 2-8 Parallel Port, Floppy/Hard Disk Drive and SCSI Connections Note the following when connecting the floppy and hard disk drive cables. • The floppy disk drive cable has seven twisted wires. • A red mark on a wire typically designates the location of pin 1.
2-16 S UPER P3TDDR User’s Manual IDE Connectors There are no jumpers to config- ure the onboard IDE interfaces IDE1 and IDE2. Refer to the table on the right for pin defini- tions. You must use the ATA100/66 cable included with your system to benefit from the ATA100/66 technology.
Chapter 2: Installation 2-17 Ultra Wide SCSI Connector Refer to the table below for pin definitions for the Ultra Wide SCSI connectors. The connectors are located at JA1, JA2 and JA3.
2-18 S UPER P3TDDR User’s Manual 2-9 Installing Software Drivers After all the hardware has been installed you must install the software drivers. The necessary drivers are all included on the Supermicro CD that came packaged with your motherboard. After inserting this CD into your CDROM drive, the display shown in Figure 2-5 should appear.
3-1 Chapter 3: Troubleshooting Chapter 3 Troubleshooting 3- 1 Troubleshooting Procedures Use the following procedures to troubleshoot your system. If you have followed all of the procedures below and .
3-2 S UPER P3TDDR User’s Manual 3-2 Technical Support Procedures Before contacting Technical Support, please take the following steps. Also, note that as a motherboard manufacturer, Supermicro does not sell directly to end-users, so it is best to first check with your distributor or reseller for troubleshooting services.
3-3 Chapter 3: Troubleshooting 3. If you still cannot resolve the problem, include the following information when contacting Supermicro for technical support: • Motherboard model and PCB revision nu.
3-4 S UPER P3TDDR User’s Manual Question: After flashing the BIOS my system does not have video. How can I correct this? Answer: If the system does not have video after flashing your new BIOS, it indicates that the flashing procedure failed.
3-5 Chapter 3: Troubleshooting 3- 4 Returning Merchandise for Service A receipt or copy of your invoice marked with the date of purchase is required before any warranty service will be rendered. You can obtain service by calling your vendor for a Returned Merchandise Authorization (RMA) number.
3-6 S UPER P3TDDR User’s Manual Notes.
Chapter 4: Award BIOS 4-1 Chapter 4 AwardBIOS 4-1 Introduction This chapter describes the AwardBIOS for the P3TDDR. The Award ROM BIOS is stored in a Flash chip and can be easily upgraded using a floppy disk-based program.
S UPER P3TDDR User's Manual 4-2 4-2 Running Setup *Optimal default settings are in bold text unless otherwise noted. The BIOS setup options described in this section are selected by choos- ing the appropriate text from the Main BIOS Setup screen.
Chapter 4: Award BIOS 4-3 Main BIOS Setup Menu Main Setup Features Date/Time Set the system date and time. Key in the correct information in the "mm", "dd" and "yy" fields. Press the "Enter" key to save the data.
S UPER P3TDDR User's Manual 4-4 IDE HDD Auto-Detection Press the <Enter> key to activate the "IDE HDD Auto-Detection" function, which will allow BIOS to automatically detect the status of the IDE HDD installed in the system, such as the size and number of cylinders.
Chapter 4: Award BIOS 4-5 IDE Primary Master/Slave UDMA This is available only when your IDE drive supports UDMA and the operating environment also includes a UDMA drive. If your IDE hard drive and your system software both support UDMA, select Auto to enabled BIOS support.
S UPER P3TDDR User's Manual 4-6 4-4.1 Advanced BIOS Features When the required item in the "Advanced BIOS Features" is highlighted, press the <Enter> key to activate the selection, as shown below: 4-4 Advanced BIOS Setup Choose Advanced BIOS Setup from the Award BIOS Setup Utility main menu with the Left/Right arrow keys.
Chapter 4: Award BIOS 4-7 Auto Detect DIMM/PCI CLK If enabled, this feature will allow the BIOS automatically to detect the status of the DIMM/PCI clock.
S UPER P3TDDR User's Manual 4-8 Typematic Rate (Chars/Sec) You may change this setting only if the Typmatic Rate Setting is enabled. This setting allows the user to set the number of times a key stroke repeats itself in a second when the key is held down.
Chapter 4: Award BIOS 4-9 4- 4. 2 Advanced Chipset Features This section covers the functions used for configuring the system based upon the special features offered by the VIA Apollo 266 chipset. The chipset manages the operations of major components of the board.
S UPER P3TDDR User's Manual 4-10 Host & AGP Bridge Control This section documents the AwardBIOS management of the bus links between host and bridge devices. Memory Parity / ECC Check "Enabled" adds a parity check to the boot-up memory tests.
Chapter 4: Award BIOS 4-11 PCI Delayed Transition If "enabled", the PCI signal transition will be delayed. The settings are "Enabled" and " Disabled ". On-Chip IDE Channel 10/11 If "Enabled", the BIOS support of onchip IDE 10/11 will be activated.
S UPER P3TDDR User's Manual 4-12 When the above menu appears, select the items and press the <Enter> key to display the options: 4-4.3 Integrated Peripherals When the item "Integrated .
Chapter 4: Award BIOS 4-13 Onboard Serial Port 1 This option allows the user to set the address and the corresponding IRQ for Serial Port 1. The settings are "Disabled" " 3F8/IRQ4 ", "2F8/IRQ3", "3E8/ IRQ4", "2E8/IRQ3" and "Auto".
S UPER P3TDDR User's Manual 4-14 Parallel Port Mode This option sets the mode for the onboard Parallel Port. The settings are "SPP", "EPP", " ECP " and "ECP+EPP". EPP Mode Select This option allows the user to select the EPP mode.
Chapter 4: Award BIOS 4-15 4- 4. 4 Hardware Monitors When the item "Hardware Monitors" is highlighted, press the <Enter> key to activate the sub-menu, shown below: CPU Warning Temperatures This item allows the user to set the CPU temperature threshold.
S UPER P3TDDR User's Manual 4-16 4-4.5 Pr ocessor Features When the item "Processor Features" is highlighted, press the <Enter> key to activate the sub-menu, shown below: CPU L1 Cache Set this option to "Enabled" to activate the CPU L1 cache.
Chapter 4: Award BIOS 4-17 4-5 PnP/PCI Configurations Highlight the item "PnP/PCI" on the main menu bar to activate the following screen: CPU L2 Cache ECC Checking Set this option to "Enabled" to activate the ECC checking of the CPU L2 cache.
S UPER P3TDDR User's Manual 4-18 PCI Slot 1/2/3 IRQ Select This feature allows the user to determine the PCI interrupts or (by choosing "Auto") allows the system to make such a determination.
Chapter 4: Award BIOS 4-19 PCI/VGA Palette Snoop For best system performance, this item has been pre-set to "Disabled" by the manufacturer. The settings are "Enabled" and " Disabled ". Assign IRQ for VGA The "Enabled" setting allows the AwardBIOS to assign an IRQ for the VGA devices.
S UPER P3TDDR User's Manual 4-20 ACPI Function This item allows you to Enable and Disable the Advanced Configuration and Power Management. The settings are " Enabled " and "Disabled". ACPI Suspend Type This item allows the user to determine the ACPI Suspend type.
Chapter 4: Award BIOS 4-21 Video Off Option This option sets the status of video device and monitor when the system is in the Suspend Mode. When set to "Always On", the video device and the monitor will always be on when the system is in the suspend mode.
S UPER P3TDDR User's Manual 4-22 4- 7 Boot-up Devices When the Item "Boot" is highlighted on the main menu bar, you should see the following screen: Award BIOS attempts to load the operating system from devices specified by the users in a user-specified sequence.
Chapter 4: Award BIOS 4-23 First Boot Device This item allows the user to set the first boot-up device. The settings are " Floppy ", "LS120", "HDD-0", "SCSI", "CDROM", "HDD-1", "HDD-2", "HDD-3", "ZIP100", "LAN" and "Disabled".
S UPER P3TDDR User's Manual 4-24 4-8 Security Setup When the Item "Security" is highlighted on the main menu bar, you should see the following screen: Set Supervisor's Password When the item "Set Supervisor Password" is highlighted on the above screen, hit the <Enter> key.
Chapter 4: Award BIOS 4-25 4-9 Exit Setup Select "Exit" from the Main Menu bar to activate the following screen:.
S UPER P3TDDR User's Manual 4-26 Save & Exit Setup When the item "Save & Exit" is highlighted, press the <Enter> key. If you then highlight the letter "Y" and press <Enter>, you will save the changes you've made in the BIOS program (CMOS) and exit Setup.
Appendix A: AwardBIOS Post Messages APPENDIX A A-1 Appendix A AwardBIOS POST Messages During the Power-On Self-Test (POST), the BIOS will check for errors. If an error is found and a correction is needed, the BIOS will activate an alarm or display a message.
S UPER P3TDDR User’s Manual A-2 DISKETTE DRIVES OR TYPES MISMATCH ERROR - RUN SETUP The type of diskette drive installed in the system is different from the CMOS definition. Run Setup to reconfigure the drive type correctly. DISPLAY SWITCH IS SET INCORRECTLY The display switch on the motherboard can be set to either monochrome or color.
A-3 Appendix A: AwardBIOS POST Messages Memory Address Error at ... Indicates a memory address error at a specific location. You can use this location along with the memory map for your system to find and replace the bad memory chips. Memory parity Error at .
S UPER P3TDDR User’s Manual A-4 FLOPPY DISK(S) fail (80) ® Unable to reset floppy subsystem. FLOPPY DISK(S) fail (40) ® Floppy Type dismatch. Hard Disk(s) fail (80) ® HDD reset failed Hard Disk(s) fail (40) ® HDD controller diagnostics failed. Hard Disk(s) fail (20) ® HDD initialization error.
Appendix B: AwardBIOS POST Codes B-1 This section lists the POST (Power On Self Testing) Codes for the Award BIOS. POST (hex) Description CFh Test CMOS R/W functionality.
S UPER P3TDDR User’s Manual B-2 POST (hex) Description 0Fh Reserved 10h Auto detect flas h type to load appropriate flash R/W codes into the run time area in F000 for ESCD & DMI support. 11h Reserved 12h Use w alking 1’s algorithm to chec k out interface in CMOS circuitry .
Appendix B: AwardBIOS POST Codes B-3 2Dh 1. Initialize multi-language 2. Put information on screen display, including Aw ard title, CPU type, CP U speed …. 2Eh Reserved 2Fh Reserved 30h Reserved 31h Reserved 32h Reserved 33h Reset keyboard exce pt Winbo nd 977 series Super I/O chips.
S UPER P3TDDR User’s Manual B-4 POST (hex) Description 58h Reserved 59h Initialize the combined Tr e nd Anti-Virus code. 5Ah Reserved 5Bh (Optional Feature) Show message for entering AWDFLA SH . EXE from FDD (o p tional) 5Ch Reserved 5Dh 1. Initialize Init_Onboard_Super_I O switch.
Appendix B: AwardBIOS POST Codes B-5 POST (hex) Description 80h Reserved 81h Reserved 82h 1. Call chipset power m anagement hook. 2. Recover the text font used by EPA logo (not for full s creen logo) 3. If pass word i s set, as k f or passw ord. 83h Save all data in stack back to CMOS 84h Initialize ISA PnP bo ot devices 85h 1.
S UPER P3TDDR User’s Manual B-6 Notes.
Appendix C: AwardBIOS Beep Codes C-1 This section lists the Award BIOS Error Beep Codes. Beep Code Error Message Description 1 short beep System boot. 2 short beeps Incorrect CMOS setting. 1 long + 1 short DRAM error. 1 long + 2 short VGA error. 1 long + 3 short Keyboard error.
S UPER P3TDDR User’s Manual C-2 Notes.
Ein wichtiger Punkt beim Kauf des Geräts SUPER MICRO Computer SUPER (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SUPER MICRO Computer SUPER noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SUPER MICRO Computer SUPER - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SUPER MICRO Computer SUPER reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SUPER MICRO Computer SUPER erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SUPER MICRO Computer SUPER besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SUPER MICRO Computer SUPER verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SUPER MICRO Computer SUPER. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SUPER MICRO Computer SUPER gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
