Benutzeranleitung / Produktwartung BI-48SD des Produzenten Sub-Zero
Zur Seite of 40
Built-In Refrigeration Design Guide.
Features and specications ar e subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information. IMPORT ANT NOTE: Throughout this guide, dimensions may vary by ± 1 / 8 " (3) . Dimensions in parentheses ar e millimeters unless otherwise specied.
subzero.com/specs | 3 BUIL T -IN REFRIGERA TION • Ener gy efcient; many models ar e ENERGY ST AR ® qualied. • Advanced water ltration and air purication systems. • NEW! French door models r equires less space for door clearance to accommodate virtually any-size kitchen.
4 | Sub-Zero Customer Car e 800.222.7820 Built-In Design Options FRAMED For the classic Sub-Zero look, choose framed custom door panels that contrast with the stainless steel full-length handles and louvered grille (shown). The framed applica- tion is an overlay model with framed design features.
subzero.com/specs | 5 Built-In Design Options FLUSH INSET The ush inset design option allows for ush door and grille panels and custom handle hardwar e. Shown with tubular handle option to match W olf built-in ovens. The ush inset application is an overlay model with ush inset panels.
6 | Sub-Zero Customer Car e 800.222.7820 Overall Dimensions ALL REFRIGERA TOR / ALL FREEZER Models BI-36R, BI-36RG and BI-36F . BUIL T -IN REFRIGERA TION 36" (914) 84" (2134) 4" (1 02) .
subzero.com/specs | 7 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Models BI-30U and BI-30UG. 30" (762) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584) 23 7 / .
8 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions OVER-AND-UNDER Model BI-36UFD. 36" (914) 84" (2134) 4" (1 02) 50 3 / 4 " (1289) 23" (584).
subzero.com/specs | 9 BUIL T -IN REFRIGERA TION Model BI-36S. 36" (914) 84" (2134) 4" (1 02) 73 3 / 4 " (1873) 23 7 / 8 " (606) 22 1 / 4 " (565) 7 1 / 4 " (184) 8 3 .
10 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Overall Dimensions SIDE-BY -SIDE Model BI-48S, BI-48SID and BI-48SD. 48" (1219) 84" (2134) 4" (1 02) 73 3 / 4 " .
subzero.com/specs | 11 Specications BUIL T -IN MODELS INTERIOR CAP ACITY ALL REFRIGERA TOR / ALL FREEZER R CU FT (L) F CU FT (L) BI-36R 23.5 (665) BI-36RG 23.4 (663) BI-36F 22.7 (643) OVER-AND-UNDER R CU FT (L) F CU FT (L) BI-30U 13.2 (374) 4.2 (119) BI-30UG 13.
12 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit.
subzero.com/specs | 13 BUIL T -IN REFRIGERA TION Opening Dimensions FLUSH INSET INST ALLA TION FLUSH INSET WIDTH MODEL W BI-36R, BI-36RG, BI-36F 38" (965) BI-30U, BI-30UG 32" (813) BI-36U, B.
14 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL ST ANDARD INST ALLA TION 83 3 / 4 " (2127) OPENING HEIGHT 24" (610) OPENING DEPTH NOTE: Shaded line represents profile of unit.
subzero.com/specs | 15 BUIL T -IN REFRIGERA TION Opening Dimensions DUAL FLUSH INSET INST ALLA TION 84" (2134) FLUSH INSET HEIGHT 1 / 4 " (6) 26 3 / 16 " (665) FLUSH INSET DEPTH 2 3 / 16 " (56) *3 " (76) typical depth. Shaded areas will be visible and should be finished to match cabinetr y.
16 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Plumbing The water supply line should be located within the shaded area shown in the illustration below . The water supply line should be connected to the house supply with an easily accessible shut-off valve.
subzero.com/specs | 17 FRAMED P ANELS The framed application is an overlay model with framed design features. It is not a separate model. If the custom panel is thinner than 1 / 4 " (6) , a ller material must be added to achieve a proper t.
18 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION P ANEL MOUNTING KIT A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is avail able through an authorized Sub-Zero dealer . For local dealer information, visit the nd a showroom section of our website, subzer o.
subzero.com/specs | 19 BUIL T -IN REFRIGERA TION Custom Panels FLUSH INSET P ANELS The ush inset application is an overlay model with ush inset panels. It is not a separate model. The ush inset design allows custom panels to be installed ush with adjacent cabinets.
20 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION MODEL BI-36U, BI-36UG REFRIGERA TOR W H Door Panel 35 3 / 4 " (908) 49 15 / 16 " (1268) FREEZER W H Drawer Panel 35 3 / 4 .
subzero.com/specs | 21 BUIL T -IN REFRIGERA TION Framed Panel Dimensions MODEL BI-36S REFRIGERA TOR W H Door Panel 19 13 / 16 " (503) 69 9 / 16 " (1767) FREEZER W H Door Panel 15 7 / 16 &quo.
22 | Sub-Zero Customer Car e 800.222.7820 Overlay Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Overlay Panel 36" (914) 69 3 / 4 " (1772) Spacer Panel 35 1 / 8 &.
subzero.com/specs | 23 Overlay Panel Dimensions BUIL T -IN REFRIGERA TION H H H W A A A A H H W H H W H H W A A A B H H H W H W H H W W B A H H W W W H H H W A A A A H H W H H W H H W A A A B H H H W .
24 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 37" (940) 69 3 / 4 &qu.
subzero.com/specs | 25 BUIL T -IN REFRIGERA TION Flush Inset Panel Dimensions MODEL BI-42UFD REFRIGERA TOR (2 P ANELS) W H Flush Inset Panels 21 3 / 8 " (543) 50 1 / 8 " (1273) Spacer Panels.
26 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Flush Inset Panels P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a ush inset application. Refer to the chart below for refer ence to the illustrations.
subzero.com/specs | 27 BUIL T -IN REFRIGERA TION Dual Installation If two units are installed side by side, a dual installation kit may be requir ed. Installations without a custom ller strip requir e a dual installation kit. If a dual installation kit is not specied, a 2" (51) ller strip is recommended between units.
28 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION Dual Flush Inset Panel Dimensions MODEL BI-36R, BI-36RG, BI-36F REFRIGERA TOR / FREEZER W H Flush Inset Panel 36 1 / 2 " (927) .
subzero.com/specs | 29 BUIL T -IN REFRIGERA TION Dual Installation DUAL FLUSH INSET P ANEL OFFSETS The illustrations provide panel of fsets and reveals for built-in models in a dual ush inset application. Refer to the chart below for refer ence to the illustrations.
30 | Sub-Zero Customer Car e 800.222.7820 Dual Installation DUAL WIDE GRILLE A dual wide grille spans the entire width of both units in a dual installation and is a part of a dual installation kit. For overlay and ush inset panel dimensions for the dual wide grille, refer to the charts below .
subzero.com/specs | 31 Side Panel The custom side panels must be a minimum of 24" (610) deep and 1 / 2 " (13) thick. Routing will be necessary for the side panel to t ush against the side of the unit. Refer to the illustrations below .
32 | Sub-Zero Customer Car e 800.222.7820 Framed Panels FULL-SCALE TEMPLA TE BUIL T -IN REFRIGERA TION OPTIONAL EXTENDED FULL-LENGTH HANDLE ST ANDARD FULL-LENGTH HANDLE 1 / 4 " (6) FRAMED P ANEL .
subzero.com/specs | 33 Overlay and Flush Inset Panels FULL-SCALE TEMPLA TE Overlay and ush inset panels must be a minimum of 5 / 8 " (16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door .
34 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 23 7 / 8 " (606) TO REAR OF UNIT O VERALL WIDTH OF UNIT 1 1 / 4 " (32) 1 1 / 2 " (38) 1 3 / 4 " (44) 0" (0).
subzero.com/specs | 35 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) ASSUMES 3 / 4 " (19) FLUSH INSET P ANEL THICKNESS 2 3 / 16 " (56) 24" (610) TO BA CK W ALL 3 / 4 " (19) THICK FLUSH INSET P ANEL (TYPICAL) 1 / 4 " (6) BACKER P ANEL 1" (25) THICK P ANEL 1" (25) 0" SCALE 110° door opening (top view).
36 | Sub-Zero Customer Car e 800.222.7820 BUIL T -IN REFRIGERA TION 1 1 / 4 " (32) FILLER STRIP APPR OX PR OFILE OF ST AINLESS STEEL WRAPPED DOOR AND HANDLE DOOR OPEN 110° DOOR CLOSED Dual standard installation (top view).
subzero.com/specs | 37 BUIL T -IN REFRIGERA TION 1 1 / 2 " (38) 1 / 2 " (13) FILLER STRIP PROFILE OF 3 / 4 " (19) FLUSH INSET P ANEL AND TUBULAR HANDLE DOOR CLOSED DOOR OPEN 110° Dual ush inset installation (top view).
Sub-Zero Residential Limited Warranty FOR RESIDENTIAL USE FULL TWO YEAR WARRANTY* For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec- tive in materials or workmanship.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Gr eat American Kitchens The Fine Art of Kitchen Design, and Ingredients are r egistered trademarks and service marks of Sub-Zero, Inc.
SUB-ZERO, INC. P.O. BOX 44848 MADISON, WI 53744 SUBZERO.COM 800.222.7820 SZBIDG 1/ 201 4.
Ein wichtiger Punkt beim Kauf des Geräts Sub-Zero BI-48SD (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sub-Zero BI-48SD noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sub-Zero BI-48SD - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sub-Zero BI-48SD reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sub-Zero BI-48SD erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sub-Zero BI-48SD besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sub-Zero BI-48SD verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sub-Zero BI-48SD. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sub-Zero BI-48SD gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
