Benutzeranleitung / Produktwartung SHS62A des Produzenten Stow
Zur Seite of 68
Re vision #0 (06/02/06) SideWinder MODEL SHS62A CUT -OFF SA W THIS MANU AL MUST A CCOMP ANY THE EQUIPMENT A T ALL TIMES. OPERA TION & P AR TS MANUAL.
Engine e xhaust and some of its constituents, and some dust created of Calif ornia to cause cancer , bir th defects and other repr oductive harm. b y po wer sanding, sa wing, grinding, drilling and other construction activities contains chemicals kno wn to the State Some e xamples of these chemicals are: Lead fr om lead-based paints.
NO TE P A GE.
P A GE 4 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — T ABLE OF CONTENTS STOW — SHS62A CUT -OFF SA W Proposition 65 W ar ning ............................................. 2 T ab le Of Contents .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 5 When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer account number ❒ ❒ .
P A GE 6 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — SAFETY MESSA GE ALERT SYMBOLS Safety precautions should be followed at all times when operating this equipment.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 7 Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, when the saw is not in use. Over Speed Conditions NEVER tamper with the factory settings of the engine gov e rnor or settings.
P A GE 8 — SHS62A CUT -OFF SA W — OPERA TION & P AR TS MANU AL — REV . #0 (06/02/06) SAFETY ■ DO NOT operate or service this equipment before reading this entire manual . ■ This equipment should not be operated by persons under 18 years of age.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 9 ■ AL W A YS wear proper respirator y (mask), hear ing and e ye protection equipment when operating the saw . ■ AL W A YS hold the sa w with both hands when the engine is running.
P A GE 10 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — RULES FOR SAFE OPERA TION ■ NEVER leave the machine unattended while running. ■ NEVER run the engine without the air filter . Sev ere engine damage could occur .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 11 SHS62A CUT -OFF SA W — RULES FOR SAFE OPERA TION EMERGENCIES ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit .
P A GE 12 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — SPECIFICA TIONS s n o i t a c i f i c e p S e c r u o S r e w o P A 2 6 S H S . 2 e l b a T e p y T e n i g n Ed e l o o c r i A , r e d n i l y C e l g n i S , e k o r t S - o w T t n e m e c a l p s i D) .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 13 SHS62A CUT -OFF SA W — DECAL PLA CEMENT Machine Operation And Safety Decals The SHS62A CUT -OFF SA W is equipped with a number of operation and safety decals (Figure 1).
P A GE 14 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CONTROLS & COMPONENTS 7. Roller Wheel – Allo ws for easy free mo vement of the sa w when cutting on a flat surface. 8. V -belt Cover (Clutch) – Unscrew these 2 nuts to remo v e the clutch V -belt cov e r .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 15 SHS62A CUT -OFF SA W — CONTROLS & COMPONENTS 13. Blade Guard – Covers saw blade. 14. Front Handle – When lifting or carrying of the saw is required, use this handle.
P A GE 16 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) The Stow Side Winder Cut-Off Saw comes with a T ool Kit (Figure 4) that assists you with da y to da y operations. Y ou will need these tools f or the assemb ly of y our sa w .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 17 SHS62A CUT -OFF SA W — W A TER KIT INST ALLA TION INSTRUCTIONS Figure 9.
P A GE 18 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) W ARNING F ailure to thoroughly inspect the diamond blade (Figure 12) for operational safety could result in damage to the blades or the saw and may cause injury to the user or others in the operating area.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 19 The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine. The OPEN position provides the correct fuel mixture for normal operation after starting, and for restarting a warm engine.
P A GE 20 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Shut-down 1 . Let the engine idle for 3-5 minutes. 2 . Place the engine ON/OFF switch to the OFF position 3 . W ait for the b lade to stop spinning before handling the saw .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 21 SHS62A CUT -OFF SA W — MAINTENANCE Figure 17. Drive V -Belt Figure 14. Belt Guard Cover Removal Remove the 2 hex nuts L and hex screw and washer M to gain access to the V -belt on the clutch side.
P A GE 22 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Figure 19. Re-Installing Cover Guard Re-install the guard K and V -belt T co vers . Fully tighten the two cap screws J and reinstall the adjustment knob I .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 23 Reversing the Cutting Arm Procedure NOTE This assembly procedure permits the operator to reorient the cutting blade closer to a wall, column and/or object.
P A GE 24 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V -belt by turning the belt tensioning cam O . The V -belt should remain in tension.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 25 SHS62A CUT -OFF SA W — MAINTENANCE (AIR/FUEL FIL TER) Figure 25. Fuel Filter Air/Fuel Filter Maintenance Procedures Check the fuel filter G located inside the fuel tank periodically for dirt/debris build up.
P A GE 26 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — TROUBLESHOO TING (BLADE) G N I T O O H S E L B U O R T E D A L B . 3 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 27 SHS62A CUT -OFF SA W — TR OUBLESHOO TING (ENGINE) ) E N I G N E ( G N I T O O H S E L B U O R T . 4 E L B A T M O T P M Y SE S U A C E L B I S S O PN O I T U L O S o n t u b , e l b a l i a v a s i l e u f " , t r a t s o t t l u c i f f i D .
P A GE 28 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — TROUBLESHOO TING (ENGINE) ) D E U N I T N O C , E N I G N E ( G N I T O O H S E L B U O R T .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 29 HS62FK1A [ Includes 1 ea.] HS52020270R- Foam Filter HS018600125R- Paper Filter HS018600056AR - Inner Filter HS62FK5A [ Includes 5 ea.] HS52020270R- Foam Filter HS018600125R - Paper Filter HS018600056AR - Inner Filter HS62FK10A [ Includes 10 ea.
P A GE 30 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) The contents and part numbers listed in the parts section are subject to change without notice . Stow does not guarantee the availability of the parts listed.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 31 SHS62A CUT -OFF SA W — SUGGESTED SP ARE P ARTS SUGGESTED SP ARE P AR TS SHS62A SIDEWINDER CUT -OFF SA W 1 to 3 Units Qt y . P/ N Description 1 ............ HS52022011A .
P A GE 32 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — MUFFLER ASSY . MUFFLER ASSY ..
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 33 MUFFLER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 * HS3801052 SCREW 3 2 * HS3033074 W ASHER 5 3 * HS500.
P A GE 34 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — RECOIL ST ART ASSY . RECOIL ST AR T ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 35 RECOIL ST AR T ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 14 * HS50140060 HANDLE, ST AR TER ROPE 1 15 * HS.
P A GE 36 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CRANKCASE ASSY . CRANKCASE ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 37 CRANKCASE ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS52010312 P LA T E 1 1 1 HS52020014 GROMMET 1 1 2 HS52020040 C A P 1 1 6 HS50010047AR GASKET , CRANKCASE 1 1 8 HS52020273 CRANKCASE W/ BEARING ASSY .
P A GE 38 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — V -BEL T CO VER (CLUTCH SIDE) ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 39 V -BEL T CO VER (CLUTCH SIDE) ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 40 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — V -BEL T CO VER (PULLEY) /BLADE GU ARD ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 41 V -BEL T CO VER (PULLEY -SIDE)/BLADE GUARD ASSY . NO . P AR T NO .
P A GE 42 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 43 SHS62A CUT -OFF SA W — FUEL T ANK ASSY . FUEL T ANK ASSY . NO .
P A GE 44 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — LIFTING HANDLE AND ROLLER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 45 LIFTING HANDLE AND R OLLER ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 46 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — THRO TTLE LINKA GE ASSY . THRO TTLE ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 47 THRO TTLE ASSY NO . P AR T NO . P AR T NAME QTY . REMARKS 1 0 HS52010092 TH RO TTLE TRIGGER LEVER .
P A GE 48 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FL YWHEEL CO VER ASSY . FL YWHEEL CO VER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 49 FL YWHEEL CO VER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 3 HS005000361 W ASHER, FLA T 1 4 HS3833080 W ASHER, LOCK 1 5 HS004000142 N UT 1 6 HS500110019A FLANGE, ST ARTER 1 SHS62A CUT -OFF SA W — FL YWHEEL CO VER ASSY .
P A GE 50 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — FL YWHEEL ASSY . FL YWHEEL ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 51 FL YWHEEL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52020247R FL YWHEEL ................................................ 1 ......... INCLUDES ITEM W/ * 2 * HS52012027 P AWL S ET 1 SHS62A CUT -OFF SA W — FL YWHEEL ASSY .
P A GE 52 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — IGNITION COIL ASSY . IGNITION COIL ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 53 IGNITION COIL ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 7 * HS094600169 SPRING SP ARK PLUG 1 8 * HS094600.
P A GE 54 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — AIR FIL TER ASSY . AIR FIL TER ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 55 AIR FIL TER ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012024B FLANGE, PRE- FIL TER, CAP 1 2 HS330000010 O - RING, FLANGE PRE- FIL TER 2 3 HS018600125R FI L TER, AIR (ST AND ARD) 1 3A HS099900778A FI L TER, AIR (WET CUTTING) .
P A GE 56 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CARB URET OR MOUNTING ASSY . CARBURET OR MOUNTINGASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 57 CARBURET OR MOUNTING ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 6 HS3833073 W ASHER 2 1 1 HS52020060 SPRIN.
P A GE 58 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 59 SHS62A CUT -OFF SA W — CARBURET OR ASSY . CARBURET OR ASSY . NO .
P A GE 60 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — CRANKSHAFT / PIST ON ASSY . CRANKSHAFT AND PIST ON ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 61 CRANKSHAFT AND PIST ON ASSY . NO . P AR T NO . P AR T NAME QTY .
P A GE 62 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY .
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 63 SHS62A CUT -OFF SA W — W A TER KIT ASSY . W A TER KIT ASSY . NO . P AR T NO . P AR T NAME QTY . REMARKS 1 HS52012062 W A TER KIT ASSY . ..........................
P A GE 64 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) SHS62A CUT -OFF SA W — T OOLS T OOLS.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 65 SHS62A CUT -OFF SA W — T OOLS T OOLS NO . P AR T NO . P AR T NAME QTY .
P A GE 66 — SHS62A CUT -OFF SA W — OPERA TION & P ARTS MANU AL — REV . #0 (06/02/06) Recommended Diamond Blades for Y our Saw Side Winder Aspha lt G r een C oncre te Light We ight Bloc k C o.
SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06) — PAGE 67 Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — P AR TS T erms and Conditions of Sale STOW Construction.
OPERA TION AND P ARTS MANUAL HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PAR TS DEP ARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 .
Ein wichtiger Punkt beim Kauf des Geräts Stow SHS62A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Stow SHS62A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Stow SHS62A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Stow SHS62A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Stow SHS62A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Stow SHS62A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Stow SHS62A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Stow SHS62A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Stow SHS62A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
