Benutzeranleitung / Produktwartung 1001 des Produzenten Stovax
Zur Seite of 26
Regency Free Standing Stove M ODELS: 1000/1001/1002 * *Excludes 1002 PM218 Issue 2 (May 2008) Instructions for Use, Installation and Servicing For use in Great Britain and Republic of Ireland IMPORTAN.
COVERING THE FOLLOWING MODELS: 1000/1001/1002 2 COMMISSIONING 21 MAINTENANCE & SERVICING 22 Annual Service 22 Removal of Baffle & Grate 23 BASIC SPARE PARTS LIST 23 SERVICE RECORDS 24 EC DECLA.
3 APPLIANCE COMMISSIONING CHECKLIST To assist us in any guarantee claim please complete the following information:- Stovax dealer appliance was purchased from Name: ......................................................................................
4 USER INSTRUCTIONS 1. GENERAL POINTS 1.1 Before use of this appliance please read these instructions fully. 1.2 All local regulations, including those referring to national and European Standards need to be complied with when installing the appliance.
5 USER INSTRUCTIONS Flue Adapter Stovax Part No. 4819 Ash pan (Not included with appliance) Ash lip Blanking plate bottom view rear view.
6 USER INSTRUCTIONS WARNING Properly installed, operated and maintained this appliance will not emit fumes into the room. Occasional fumes from de-ashing and refuelling may occur. Persistent fume emission is potentially dangerous and must not be tolerated.
7 USER INSTRUCTIONS 4. LIGHTING THE APPLIANCE 4.1 For best results: •Fullyopen thedoor s •Place firelighters or paper and dry kindling wood on the.
8 USER INSTRUCTIONS Weather Conditions Problem Effect Windy days Buildings/Obstacles cause turbulent air around chimney. Smoky Appliance Calm days Oversized Chimney. Smoky Appliance Damp / Rainy days Flue temperature not hot enough. Rain water inside chimney.
9 7.3 Remove Ashpan carefully. Heat can remain long after use, See Diagram 12 •Use gloves, or place the ash into a Stovax Ash Caddy (Stovax Part No.
10 14. SEASONAL USE 14.1 Clean and service the appliance if it is not used during the warmer periods of the year as detailed in the Maintenance and Servicing section 14.2 Set the air controls 50% open to keep the appliance ventilated and stop the build-up of any moisture inside.
11 TECHNICAL SPECIFICATION REGENCY 1000/1001/1002 Medium Regency *Large Regency Nominal Heat Output Wood Seasoned wood (less than 20% moisture content) Briquette smokeless fuel suitable for open appliances. (Homefire - Supertherm) Solid Fuel 12 42 5 1.
12 TECHNICAL SPECIFICATION REGENCY DIMENSIONS Description Model A B C D E F G H I Small Regency 1000 930mm 760mm 140mm 850mm 740mm 296mm 350mm 650mm 120mm Medium Regency 1001 960mm 800mm 140mm 950mm 840mm 296mm 400mm 690mm 120mm Large Regency 1002 960mm 800mm 140mm 1050mm 930mm 296mm 400mm 690mm 120mm PR7215R A B C F E D G H I All dimensions in mm.
13 1. FLUE OR CHIMNEY 1.1 The flue or chimney system must be in good condition. It must be inspected by a competent person and passed for use with the appliance before installation Products of combustion entering the room can cause serious health risks.
14 SITE REQUIREMENTS PR7216R 150mm minimum Constructional Hearth 840mm minimum Constructional Hearth 840mm minimum 150mm minimum 150mm minimum 225mm minimum 2.1 The appliance must stand on a non-combustible constructional hearth which is at least 125mm thick with the minimum dimensions as shown in diagram.
15 SITE REQUIREMENTS 3. WALLS NEXT TO A HEARTH Solid, non-combustible material e.g. masonry or concrete Thickness W C 150mm minimum 150mm minimum C H PR7217R Position of Appliance & Hearth in rela.
16 PRE-INSTALLATION CHECKS Medium Regency Large Regency Without liner system round (diameter) mm mm inch mm inch inch m feet 4.5 15 4.5 15 200 200 8 180 7 8 200 200 8 180 7 8 Without liner system (squ.
17 PRE-INSTALLATION CHECKS 2.1 Additional ventilation will be required to comply with the requirements of the Building Regulations. This should be provided using a permanently open air vent, of the size listed, which is positioned so that it is not liable to be blocked both inside and outside the building.
18 LEGAL REQUIREMENTS Before installation of this product please read these instructions fully. It is very important to understand the requirements of the national Building Regulations* and standards**, along with any local regulations and working practices that may apply.
19 PR7219R Self tappping screw at rear Flue Pipe 915mm (3ft) Size Stovax Part No. *5" 4502 6" 4602 Seal flue collar with Fire Cement Flue Adapter Size Stovax Part No. 8" 4819 INSTALLATION INSTRUCTIONS PR7220R 600mm min 1000mm max unsupported Elbow with access cover Size Stovax Part No.
20 INSTALLATION INSTRUCTIONS 3. FITTING AND REMOVAL OF THE GRATE 3.1 The grate must be fitted for the burning of all fuels. 3.2 To fit the grate place on the runners on the side of the firebox. 3.3 Place ashpan under the grate. 3.4 Removal is the reverse of the above procedure 4.
21 COMMISSIONING 1.1 To commission: • Replace the firebricks, baffle, and log retainer • Check the door alignment and catch operation • Check the soundness of door seals, castings and joints •C heck the operation of the air controls 1.
22 MAINTENANCE and SERVICING For a complete list of spare parts and accessories contact your Stovax dealer for the Stovax Fireplace, Stove & Hearth Accessories brochure or call 01392 474011 1.
23 BASIC SPARE PARTS LIST Part No. Description Casting No. SR8 Baffle Plate 15123-5 SR9 Grate 10201-5 REGENCY - SMALL REGENCY - MEDIUM REGENCY - LARGE Part No. Description Casting No. MR8 Baffle Plate 15123-6 MR9 Grate 10201-6 Part No. Description Casting No.
24 SERVICE RECORDS 1ST SERVICE Date of Service:........................................................................... Next Service Due:....................................................................... Signed:................................
25 EZ/07/1991/09-10 EZ/07/1991/09-10.
Stovax Ltd, Falcon Road, Sowton Industrial Estate, Exeter, Devon, England EX2 7LF Tel: (01392) 474011 Fax: (01392) 219932 E-mail: info@stovax.com www.stovax.
Ein wichtiger Punkt beim Kauf des Geräts Stovax 1001 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Stovax 1001 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Stovax 1001 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Stovax 1001 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Stovax 1001 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Stovax 1001 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Stovax 1001 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Stovax 1001. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Stovax 1001 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
