Benutzeranleitung / Produktwartung TUP992 des Produzenten Star Micronics
Zur Seite of 37
1 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088371 Date: 12/3/2007 TUP900 Revision 1.2.
2 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088372 Date: 12/3/2007 • Getting Started o Cable Connections - 4 o Loading Paper – 5 o Paper Feed Sensor Adjustment - 7 • D.
3 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088373 Date: 12/3/2007 Getting Started.
Assembly – Installing the Interface Place the interface sub-assembly into the interface slot as shown. Take care to be sure the interface cartridge is seated properly into its connector. Using a #2 Phillips scr ewdriver, install the mounting screws included with the printer.
Assembly – Paper Roll Setup It is necessary to adjust the paper roll holder for the width of the pape r you use. If the setting position is incorrect, the paper roll will be supplied improperly to the mechanism which in turn causes paper transport problems.
Assembly – Paper Rol l Setup Continued Once the paper roll holder is properly configured for the roll to be used, simply insert the roll holder into the paper core as show. Be sure that the cut end of the paper roll is properly cut to ensure proper paper loading.
TUP900 Paper Feed Sensor Adjustment – See photos below This is a multi-step process: 1. Ensure that the paper is loaded on the spindle and that the two black plastic sleeves are positioned on eithe r sid e of the paper roll in order to keep the roll centered on the spindle and fr om sliding left or right.
8 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088374 Date: 12/3/2007 Driver Installation.
9 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088375 Date: 12/3/2007 DRIVER INSTALLATION: Step 1 To download drivers from our website – go to the below link: http://www.
10 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088376 Date: 12/3/2007 Step 4 When your printer has been successfully installed, it will create a printer icon in Printers and Faxes.
11 Step 3 If you intend to use the status monitor function to get status from the printer (recommended for parallel .
12 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088378 Date: 12/3/2007 Step 7 Click on the last opt ion – Install from a list .
13 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 088379 Date: 12/3/2007 Step 9 Click on Have Disk.. Step 10 Click on Brow.
14 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883710 Date: 12/3/2007 Step 12 Choose the TUP900 with out Status Monitor and click Next Then click Next to finish the driver installation.
15 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883711 Date: 12/3/2007 Troubleshooting.
1 6 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883712 Date: 12/3/2007 TROUBLESHOOTING: Below is a list of common issues that may .
Power LED Error LED Red Green SW2 SW1 CHAPTER 6 OPERA TION SPECIFICA TIONS 6-1 Operation Panel Specifications ------------------------------------------------------------------------------------------.
1 When Power is ON SW Input Operation SW1 Self-test Print SW2 Hex Dump Mode 2 When in Sensor Adjustment Mode and Power is ON (Sensor Adjustment Mode is selected using by setting the DIPSW1-4 on the main board to OFF .
This error automatically cancels E errors by varying the status internally on the printer . Error LED Cause How to Recover Power Error Printing Stops Because Blink OFF Head Thermistor Automatic Recove.
This error requires the printer to be reset after executing a determined error recovery means because a fatal error has occurred. The printer many need to be repaired if the same error occurs even after resetting the printer .
Dip Switch Setting: 1) When mounted with a parallel interface <At Ex-factory: All are turned ON.> DIPSW1 Function ON OFF DIPSW1-1 Emulation See table below *2 DIPSW1-2 Emulation See table below .
3 ) When mounted with a U S B interface <At Ex-factory: All are turned ON.> DIPSW1 Function ON OFF DIPSW1-1 Emulation See table below *3 DIPSW1-2 Emulation See table below *3 DIPSW1-3 (Reserved:.
Testing – Printing a Printer Self-Test Page The TUP900, like all Star printers, has a built-in di agnosis printout that can be manually printed to check the printer’s current configuration. This “Self- Test” page also allows the us er to confirm that the printer is in fact operating properly.
24 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088371 Date: 12/3/2007 Example of Self-Test:.
25 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088371 Date: 12/3/2007 Recommended Settings:.
2 6 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883714 Date: 12/3/2007 Specifications.
BASIC SPECIFICATIONS Printing Specifications (1) Print Method: Direct Thermal Line Printing (2) Dot Configuration: 832 dots/line (3) Dot Density: 8 dots/mm (203 DPI) (4) Printing Region: Maximum 104 mm (See figure below) Notes 1) The mechanism can handl e paper widths of 79.
2 8 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883715 Date: 12/3/2007 Maintenance.
P îë P ïïò Ó ß×ÒÌÛ ÒßÒÝÛ Ð»®º±®³ ¬¸» º ±´´±©·²¹ ³¿·²¬»²¿²½» °» ®·±¼·½¿´´§ò Ó¿·²¬»²¿²½» л®·±¼-æ Ûª»®§ - ·¨ ³±²¬.
Left View Rig ht View Front View 30 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 088371 Date: 12/3/2007.
3 1 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883716 Date: 12/3/2007 If the green knob on the side of the presenter (in the .
Status Monitor Setup 3 2 Star Micronics America, Inc., 1150 King Georges Post Rd, Edison, NJ 0883721 Date: 12/3/2007.
3 3 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883717 Date: 12/3/2007 STATUS SETUP Please refer to the following instructions for a step by step guide on how to configure and use the Status function.
3 4 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883718 Date: 12/3/2007 Extract the files for a manual install • Connect the printer and follow the prompts to allow the printer driver to install.
3 5 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883719 Date: 12/3/2007 Recommended settings: It’s recommended that yo u enable the Loop HOLD eject setting .
3 6 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883720 Date: 12/3/200 7 The printer will eject or retract depend ing on the memory switch setting. A complete list of Presenter commands are at the end of this document.
3 7 Star Micronics America, Inc., 11 50 King Georges Post Rd, Edison, NJ 0883721 Date: 12/3/2007 You can create errors on the printer such as paper low and .
Ein wichtiger Punkt beim Kauf des Geräts Star Micronics TUP992 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Star Micronics TUP992 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Star Micronics TUP992 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Star Micronics TUP992 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Star Micronics TUP992 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Star Micronics TUP992 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Star Micronics TUP992 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Star Micronics TUP992. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Star Micronics TUP992 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
