Benutzeranleitung / Produktwartung BLUETOOTH L (1D) des Produzenten Baracoda
Zur Seite of 49
© Baracoda RoadRunne rs Evolutio n Programming Guide Baracoda TM – Novem ber 2010 RoadRunne rs Evolutio n –L (1D) & - LA (Las er) Programming Guide Data Capture for W ork force in Motion LA (.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 2 - Data Capture for W ork force in Motion SUMMARY SUMMARY ................................................................... 2 REVISION HISTORY ........................
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 3 - Data Capture for W ork force in Motion 2.8.6. S ET LENGTHS FOR C ODE 39 ....................................................... 31 2.8.7. I TALIAN P HARMA C ODE SETTINGS .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 4 - Data Capture for W ork force in Motion Revision History Changes to the original manual are listed below. Document Date Description 1.0 11 July 08 Initial release 1.1 26 Aug.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 5 - Data Capture for W ork force in Motion Introduction The RoadRunners E volution scan ner can be progra mmed by scanning ba rcode labels which contain commands for the decoder.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 6 - Data Capture for W ork force in Motion 1. General Configuration 1.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 7 - Data Capture for W ork force in Motion 1.2. Baracoda a dvanced feature s 1.2.1. Switch on delay In order to switch on the scann er in its standard mo de, you should just press the trigger.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 8 - Data Capture for W ork force in Motion 1.2.4. No data loss mode and Baracoda Header Baracod a header: It is a proprieta ry data encapsula tion. It is necessary t o activate it to use the Baracoda keyb oard emulation (Kemul) and Ter minal.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 9 - Data Capture for W ork force in Motion 1.3. Reading Mo de In Trigger mode , pressing the t rigger will activate the b eam.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 10 - Data Capture for W ork force in Motion The “ No duplicate scan” option has been d eveloped for user s who do not wan t to scan twice the same barcode consecuti vely.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 11 - Data Capture for W ork force in Motion 1.4. Operating Mode Real Time mode In real time mode, the barc ode is decoded and trans mitted t o the remote host with out an y delay.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 12 - Data Capture for W ork force in Motion 1.4.1. Real Time mode Erases all cap tured data stored in memory and force s the s canner in R eal time mod e. No oth er setting is changed.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 13 - Data Capture for W ork force in Motion 1.4.5. Batch mode BATCH MODE Forces the RoadRu nners Evo lution in Batch mode.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 14 - Data Capture for W ork force in Motion 1.5. The differ ent connection methods There are two (2 ) different way t o.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 15 - Data Capture for W ork force in Motion 1.6. Buzzer and Led Settings You can use thes e options to enable o r disable the buzz er and / o r the Led.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 16 - Data Capture for W ork force in Motion 1.7. Bluetooth settings 1.7.1. Bluetooth name You can chan ge the scanner Bluetoo th name; name that y ou see during a sear ch of Bluetooth peripheral.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 17 - Data Capture for W ork force in Motion 1.7.2. Sniff period settings Change the Snif f period. If the h igher is the latency an d the smaller is the po wer consump tion.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 18 - Data Capture for W ork force in Motion 1.7.3. Security (code PIN) settings Some Bluetooth device will not accept connections with d evices that do n ot have a security code.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 19 - Data Capture for W ork force in Motion 1.8. Data forma t The barcode string can be added a timestamp, prefix es and/or suffixes. The symbology p refix/suffix can be added by BaracodaManager only.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 20 - Data Capture for W ork force in Motion Set Timestamp END of configuration Noted tha t the timestamp must fit th e .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 21 - Data Capture for W ork force in Motion 1.8.2. Data Prefix/Suffix You can add a data prefix a nd/or suffix (strings of mor e than 32 characters will not be accepted) to every barcode sent to the host device.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 22 - Data Capture for W ork force in Motion Set Data prefix Set Data suffix End of configuration 1.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 23 - Data Capture for W ork force in Motion 1.8.4. AIM Symbology Identifier AIM Identifier will b e transmitted at the beginning of the barcode. More infor mation abou t the AIM Ident ifier is available in Appen dix2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 24 - Data Capture for W ork force in Motion 2. Decoder Parameters 2.1. Decoder defaul t settings Sets the defaults decod er settings for all t he symbologies Set Decoder Default Sett ings 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 25 - Data Capture for W ork force in Motion Set barcode length END of config 2.4. Voting Standard voting set is two (2). This mean s that a ba rcode is considered r ead by the d ecoder if the same data is decoded twice.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 26 - Data Capture for W ork force in Motion 2.5. Min/Max le ngth per symbol ogy The following i s a procedure to follow for every ba rcode symbology .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 27 - Data Capture for W ork force in Motion 2.5.1. Symbology table Header Selected Symbology SELECT ALL Code 93 Code 128 / EAN 128 Code 39 Codabar Interleaved 2 of 5 Standard 2 of 5 (industrial 2 of 5) Code 11 MSI Only the variable length s ymbologies appear.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 28 - Data Capture for W ork force in Motion 2.6.2. Codabar Start/Stop characters Not transmitted (*) Transmitted 2.6.3. Codabar Check Digit Verification (AIM recommendation) Not used (*) Checked and transmitted Checked but not transmi tted 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 29 - Data Capture for W ork force in Motion 2.7. Code 11 Se ttings 2.7.1. Enable/Disable Code 11 To enable or disable Code 11, scan the appropriate barcode below. Code 11 - not active (*) Code 11 - active 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 30 - Data Capture for W ork force in Motion 2.8. Code 39 se ttings 2.8.1. Enable/Disable Code 39 To enable or disable Code 39, scan the appropriate barcode below. Enable (*) Disable 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 31 - Data Capture for W ork force in Motion 2.8.4. Accepted Code 39 characters Code 39 - start/stop - accepted characte.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 32 - Data Capture for W ork force in Motion 2.8.7. Italian PharmaCode settings Italian PharmaCode is b ased on Code39 encoding scheme, thus its set tings are Code39 settin gs.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 33 - Data Capture for W ork force in Motion 2.10. Code 128 Settings 2.10.1. Enable/Disable Code 128/EAN 128 To enable or disable Code 128/EAN 128, scan the appro priate barcode below.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 34 - Data Capture for W ork force in Motion 2.10.3. EAN 128: Group Separator ‘FNC1’ included in an EAN128 cod e is transmitted by default as ‘GS’ (Grou p Separator – 0x1D).
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 35 - Data Capture for W ork force in Motion 2.10.4. Enable/Disable AIM ID Transmission Even if the “AIM ID tr ansmit” is disab led, it is possibl e to enable the AIM I D transmission f or EAN128.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 36 - Data Capture for W ork force in Motion 2.11.3. Set lengths for Interleaved 2 of 5 Interleaved 2 of 5 - barcode length - minimum length = 6 (* ) Interleaved 2 of 5 – ba rcode length- any leng th 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 37 - Data Capture for W ork force in Motion 2.12.3. Set lengths for MSI MSI Code - barcode length - any length MSI Code - barcode length - minimum length = 6 (*) 2.13. Standard 2 of 5 Settings 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 38 - Data Capture for W ork force in Motion 2.13.3. Set lengths for Standard 2 of 5 Standard 2 of 5 - barcode l ength - any length Standard 2 of 5 - barcode l ength - minimum len gth = 6 (*) 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 39 - Data Capture for W ork force in Motion 2.14.2. Transmit EAN13 Check Digit UPC / EAN - check digit - UPC - A and EAN13 - transmit ted (*) UPC / EAN - check digit - U PC-A/EAN 13 - not t ransmitted 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 40 - Data Capture for W ork force in Motion 2.14.6. Transmit UPC number system for UPC-E UPC / EAN - UPC number s ystem - UPC - E - transmitted (*) UPC / EAN - UPC number system - UPC-E - not transmitted 2.
RoadRunners Evoluti on – L (1D) & 2.14.8. ISSN/ISBN settings UPC / EAN UPC / EAN UPC / EAN – UPC / EAN 2.14.9. Add- on digits settings UPC / EAN UPC / EAN UPC / EAN UPC / EAN UPC / EAN – Add UPC / EAN L (1D) & -LA (Laser) – Progra mming Guide v1.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 42 - Data Capture for W ork force in Motion 2.15. GS1 DataB ar (RSS) 14 Set tings 2.15.1. Enable/Disable GS1 DataBar 14 GS1 DataBar 14 - active (*) GS1 DataBar 14 – not ac tive 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 43 - Data Capture for W ork force in Motion 2.16. GS1 DataB ar (RSS) Limite d Settings 2.16.1. Enable/Disable GS1 DataBar Limited GS1 DataBar Limited - active (*) GS1 DataBar Limited – not active 2.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 44 - Data Capture for W ork force in Motion 3. APPENDIX 1: ASCII Table (A-Z, a-z, 0- 9, punctuation, Control characters.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 45 - Data Capture for W ork force in Motion Small letters (a-z): Name Programming label Name Programming label a n b o .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 46 - Data Capture for W ork force in Motion Ponctuation: Name Programming label Name Programming label Space < ! = " > # ? $ @ % [ & ] ' ^ ( _ ) { * | + } , ~ - : .
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 47 - Data Capture for W ork force in Motion Decimal number s (0-9): Name Programming label 0 1 2 3 4 5 6 7 8 9.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 48 - Data Capture for W ork force in Motion Control Charac ters: Name Programming label CR EOT ETX LF NUL SOH STX TAB.
RoadRunners Evoluti on –L (1D) & -LA (Laser) – Programming Guid e v1.8 - 49 - Data Capture for W ork force in Motion 4. APPENDIX 2 – AIM symbology identifiers structure The SI prefix is a tw.
Ein wichtiger Punkt beim Kauf des Geräts Baracoda BLUETOOTH L (1D) (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Baracoda BLUETOOTH L (1D) noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Baracoda BLUETOOTH L (1D) - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Baracoda BLUETOOTH L (1D) reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Baracoda BLUETOOTH L (1D) erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Baracoda BLUETOOTH L (1D) besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Baracoda BLUETOOTH L (1D) verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Baracoda BLUETOOTH L (1D). Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Baracoda BLUETOOTH L (1D) gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
