Benutzeranleitung / Produktwartung LT0G-15A1 des Produzenten SRS Labs
Zur Seite of 73
15" Liquid Cr ystal Display T ele vision L T0G-15A1 NTSCTVTWEN1203 MAC-001 149 2F , No.362, Ruei-Guang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 Mute ................................................................ ... 3 9 Video Setting ........................................................... 4 0 Hue ................................................................. ... 4 1 Saturation .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by lookin g at the rear of your TV .
4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been care fully checked for accuracy; however , no guarantee is given to the correctn ess of the content s. The information in this docume nt is subject to ch ange without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future.
8 Optimal V iewing Dist ance.
9 Import ant Safety Instructio ns 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho c k or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S tat ement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter f erence that may ca use undesired oper ation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio noise emissions from digital app aratus as set out in the Radio Inte rference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this 15-inch Liquid Crystal Display TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The sturdy design makes it a fun addition to any room.
17 Make sure the following component s are included in the box. Cont act your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
18 F r ont View Description Function 1 Power T urns the TV on and off. 2 Power L ED Green LED indicates power on. 3 Mute In TV/ A V mode, press this button to mute the audio. 4 Source Selects the input source to be displayed (TV /CA TV , A V 1 , AV 2 or PC).
19 Input and Output P or ts Description Function 1 R-AUDIO Connects to a right audio (red) cable 2 L-AUDIO Connects to a lef t audio (white) cable 3 VIDEO Connects to a video (yellow) cable ANT DC-IN .
20 4 AV 2 Use the included 4 -IN-1 Audio/ Vi deo cable to connect exter - nal device s, such as a VCR, VCD, or DVD player , CVBS RCA cables or a game device. Audio Input: A V connectors white and red audio cables. Video Inp ut: A V connector video (yellow) or S-V ideo cables.
21 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CA TV cable to ANT Jack (VHF/UHF IN Jack) on th e back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV cable.
22 Connecting to A V Devices Connect external devices such as a VCR, VCD or DVD playe r , or video game to the TV using the 4-IN-1 cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player .
23 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digita l camera. Actual connec- tions may vary according to the make and model of the device. Refer to the user’s manual included with th e camcorder or camera for more detailed instruction s.
24 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using t he RCA Jacks provided (some game devices may require a unique ada pter that is not provided). Actual connections may vary according to the make and model of the game device.
25 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the speaker line out port as illustrated. Notes • External speakers or headphones are not included with the product.
26 Connecting to a PC Y ou can connect the TV to a PC and use it as an external monitor . Connect the TV’ s VGA port to the PC’ s VGA port. Connect the TV’s line in port to the PC’ s line out port to listen to the PC’s aud io output on the TV’s speakers.
27 Connecting the P owe r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet.
28 Using the Remote Co ntrol For best results, use the remote control within a distance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration.
29 T ur ning the TV On and Of f 1 Press the POWER button on the remote control (or control panel). The power LED on the front of the TV changes from red to green , indicating that the power has been turned on. 2 Press the POWER button again; in A V mode, the powe r LED changes from green to red , indicating that the TV is in (of f) mode.
30 Switching Source Signals Press SOURCE to select the incoming source signal. The current source setting (TV/CA TV , A V1,A V2 or PC ) appears on the upper lef t corner of the screen. Note The TV supports S-V id eo input in addition to normal vid eo and audio signals.
31 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describ es how to change each of the available settings. The OSD can be used with either th e remote con trol or the control pane l .
32 Brightness 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button o r CH DOWN b ut to n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast menu. 4 Press t h e CH UP bu tt on to increase the brightness.
33 Contrast 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN bu tto n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast me nu. 4 Press MENU to select Contrast. 5 Press t he CH UP bu tt on to increase the contrast.
34 Audio Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Audio Setting. 2 Press MENU to ente r the Audio Setting menu.
35 Tr e b l e 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press t he CH UP bu tt on to increase the treble. Press t he CH DOWN but - t on to decrease the treble.
36 Bass 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Bass. 5 Press t he CH UP bu tt on to increase the bass. Press t he CH DOWN but - t on to decrease the bass.
37 Balance 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Balance. 5 Press t he CH UP bu tt on to change the balance to t he right speaker .
38 SRS This option enables the 3D Surround Sound feature . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select SRS. 5 Press t he CH DOWN button t o t u r n the SRS on.
39 Mute 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Mute. 5 Press t he CH DOWN button t o t u r n the mute on. Press t he CH UP but - t on to turn the mute off.
40 Video Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Video Setting. 2 Press MENU to ente r the Video Settin g menu.
41 Hue 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press t he CH DOWN button t o increase the red hue. The image becomes more red. Press t he CH UP button t o i nc r e as e t h e green hue.
42 Saturation 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Saturation. 5 Press t he CH UP bu tt on to increase the saturation.
43 Sharpness 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Sharpness. 5 Press t he CH UP bu tt on to increase the sharpness.
44 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Color T emp. The following choices are available.
45 TV Setting Press the MENU button to enter OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select TV Setting. 2 Press MENU to ente r the TV Setting menu.
46 TV/CA TV 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set - ting menu. 4 Select one of the following choices. Receiving Air TV Press the CH UP button or CH DOWN button to select AIR TV when using an antenna to receive TV .
47 MTS 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set - ting menu.
48 DUAL Press the CH UP button or CH DOWN button to select Dual, which enables broadcast of the main signal on one speaker , and the alternate audio signal on the other sp eaker . 5 Press MENU to select Ret urn. 6 Press t he CH DOWN button t o e x i t the TV Setting menu.
49 Auto Program 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e le c t TV Se t t i ng . 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select Auto Pr o - gram. 5 Press t he CH D O WN button to s e le c t Ye s .
50 Manual Program This function allows you to search preset ch annels and eras e channels. 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select Manual Pro- gram.
51 Channel Add/Erase After you have fou nd a channel using Manual Program, follow the fol lowing instruction to add or erase the chann el . 1 Press MENU to select Add/Erase. 2 Select one of the following options. Add Channel Press the CH DOWN button to select Add.
52 PC Setting Press the MENU button to enter the OSD menus. 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to se lect PC. 4 Press MENU to ente r the PC menu. MENU < CH > PC PC Setting Return Select Menu OK H.
53 Horizontal Position 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press t h e CH UP button t o m ov e th e display to the r ight. Press t he CH DOWN bu tt on to move the display to the left.
54 V ertical Position 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU t o select V .Posi tion. 5 Press t he CH UP button t o mo v e t h e display up.
55 Phase 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Phase. 5 Press t he CH UP b ut to n to increase the phase.
56 Clock 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Clock. 5 Press t he CH UP b ut to n to increase the clock.
57 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select the More option. 5 Press t he CH UP b ut to n to enter the Color T emp menu.
58 User The User option enables users to make their own color settings. Press the CH UP butt on to select User . The user menu appears. – Press MENU to select User R, User G , or User B. – Press the CH UP button or the CH DOWN button to increa se or decrease the selected color tem - perature.
59 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu.
60 Language 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella - neous menu. 4 Press t he CH UP button o r CH DOWN button to select Chinese or English. 5 Press MENU to select Ret urn.
61 Sleeper The Sleeper turns the TV off automatically af ter a set period of time . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Sleeper .
62 OSD Display When set to Off, the OSD disp lay (source data on top left corner of th e TV screen) tu rns off after approximat ely 5 seconds. When se t to On, the OSD does not turn off automatically . . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous.
63 Time Setting This setting allows you to set the TV clock . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to s e l e c t Tim e S e t t i ng .
64 OSD Background This setting allows you to make the OSD background tra nsparent or opaque . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu.
65 Reset The Reset function returns all of your TV’s user settings to their factory defaults. W arning: The reset fun ction will erase all of your custom and favorite channel settings, and will reset all displa y settings (such as contrast, bright- ness, etc.
66 By default, OFF is already selected (highlighted in ye llow). The TV imme- diately resets when ON is selected and you see the messa ge on the screen. 8 Press MENU to select Ret urn. 9 Press t he CH DOWN button t o e x i t the More Option menu. Reset .
67 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid dam- aging the finish.
68 Situation Solution No picture and sound. • Connect the po wer cord properly . • Press t he POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. •P r e s s CH UP or CH DOWN to switch to other TV stations.
69 No sound but have image. • Make sure the source device is functioning properly . • Set the volu me to a higher level. • Make sur e the audio cable is connected securely . • Turn the mute off. Screen image turns over . • Make sure the video signal cable is con- nected properly .
70 L T0G-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 .
71 Aspect Ratio The ratio of width to height of a film, i mage or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV .
is a trademark of SRS Labs, Inc. SRS technology is incorpo- rated under license from SRS Labs, Inc..
Ein wichtiger Punkt beim Kauf des Geräts SRS Labs LT0G-15A1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SRS Labs LT0G-15A1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SRS Labs LT0G-15A1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SRS Labs LT0G-15A1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SRS Labs LT0G-15A1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SRS Labs LT0G-15A1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SRS Labs LT0G-15A1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SRS Labs LT0G-15A1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SRS Labs LT0G-15A1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
