Benutzeranleitung / Produktwartung DVR-16TT des Produzenten Speco Technologies
Zur Seite of 139
DVR-4TN/8TN/16T N/16ST/16TT Series SPECO TECHNOLOGIES 01/06 ® www .specotech.com DVR-4TN DVR-8TN DVR-16TN DVR-16TS DVR-16TT T riplex+ Digit al Video Recorder Family With Network/DDNS V ideo Server.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 1.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 2 Caution and Preventive T ip s • T ake care not to drop the unit or subject the unit to major shocks or jolts. • Do not place this unit on an unstable st and, bracket or mount.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 3 Important Information Before proceeding, please read and observe all instructions and warnings in this man ual . Retain this manual with the original bill of sale for future r eference and, if necessary, warranty service.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 4 T able of Content s 1. Overview ..................................................................................................................... 10 1.1 Product Key Features .
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 5 4.2.1 Sequence on Ma in Moni tor ................................................................. 34 4.2.2 Call Monito r Control .........................................
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 6 5.1.3.8 DST Bias ................................................................................. 56 5.1.4 Unit Name .............................................
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 7 5.1.6.6 Email A ddress ......................................................................... 69 5.1.6.7 SMTP Setup.....................................................
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 8 5.4 Record Setup ..................................................................................................... 81 5.4.1 Record Mode .......................
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 9 - Area Thre shold ....................................................................... 93 - Detected Area Percent age ..................................................
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 10 1. Overview The DVR-4TN/8TN/16 TN/16TS/16TT series unit is an integrated digital video recorder that combines the features of a time-lapse audio / video recorder , a multiplexer , and a video server to cr eate a single securit y CCTV solution.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 11 DVR-16TN/16TS/16TT 1.1 Product Key Features The DVR- 4TN/8TN/16TN/16TS/16TT series offers advanced features not typically found in standard mult iplexers; it integrates t he full features of a DVR, multiplexer and video server (by using the software SpecoRemote TM ).
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 12 • Powerful alarm processor allows flexible alarm trigger and responses, including alarm, motion, and camera failure • Dome control protocols: S peco, Pe lco D, Pelco P , Fastrax 2 and AD422 • T wo levels of p assword security 1.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 13 2.1 Position the Unit Position / mount the DVR-4TN/8TN/16TN/16TS/16TT series unit in an appropriate, steady location and make su re the power is off before making any connections.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 14 Connecting Short-term Device If you plan to install any short-term external devices, such as USB CD-R W , USB Hard Disk Drive, etc, to the DVR-4TN/8TN/16TN/16TS/16TT series and want to use them as pa rt of the unit system.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 15 Rear p anel of DVR-16TS/16-TT : Main Monitor (S-V ideo/ BNC/ VGA) S-V ideo, BNC and VGA output connectors are available for connecting to a main monitor . The main monitor displays liv e image and playback recorded video in full-screen or multiple window format.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 16 Audio In / Out The DVR-4TN/8TN/16TN/16TS/16TT series unit provides two c hannels of audio recording and playback. The Audio In RCA c onnector is offered for connecting an audio source device (e.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 17 Camera Looping Groups of BNC connectors are positioned on the rear panel for looping out video input. 3. General System Setup The DVR-4TN/8TN/16TN/16TS/16TT series DVR allows the user to easily access some general operations through the front panel.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 18 3.1.1 LED Definition The DVR-4TN/8TN/16TN/16TS/ 16TT series LEDs on the front panel are described as follows. Power LED (Green) The LED should be lit when the power is connected.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 19 3.1.2 Functional Keys The DVR-4TN/8TN/16TN/16TS/16TT series unit function keys on the front panel are described below for normal operation. COPY Used to quick export video to an exter nal device, including USB CD-RW and ThumbDrive ® , etc.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 20 MODE Press repeatedly to select desired main monitor display format. There are three view modes availabl e: full screen, 4-window (2 × 2) and 16-window (4 × 4).
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 21 CHANNEL • When in both Live and Playback m odes, press the CHANNEL key to view the corresponding video in full screen. The number of t he CHANNEL keys corresponds to the number of ca meras supported by the unit.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 22 • Inside the shuttle ring is the jog disk, shown in the illustration below , it can turn completely in either direction. Once you freeze the video, you can use the jog disk to go to single-step pl ay back.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 23 3.3 Power Up / Down the Unit If you must shut down the DVR-4TN/8TN/16TN/16TS/16TT series unit for any reason, use the proper shut down and po wer up procedures to avoid damage to your DVR unit.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 24 3.4 Entering OSD Setup Menu The OSD Main menu contains a list of items that are used to configure the DVR-4TN/ DVR-8TN/ DVR-16TN series. T o enter the Main menu, correct Administrator or User password is required.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 25 Move the cursor up / down over the OS D items using the Direction keys and press ENTER to enter the selected sub-menu. 3.5 System Date / T ime Setting The user can set the current date, ti me and other OSD parameters in the Date/T ime menu.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 26 Date Display Mode This function allows user to set the OS D display type of the date / time. There are three options to select from: <Y/M/D>, <M/D /Y> or <D/M/Y>.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 27 3.6 Record Schedule / Quality Setting The Record Setup menu allows the user to set recording quality , recording schedules and other recording paramete rs. This menu will not be able to access if you enter the OSD Setup Menu with User ’s p assword.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 28 3.6.2 Schedule Setup The Schedule Setup is used to set the day , night, or weekend recording schedule. Select <Schedule Setup> fr om the Record Setup menu and press ENTER; the following menu is displayed.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 29 DVR-4TS Half-D1 mode (NTSC: 720x240@ 120PPS; P AL: 720x288@100PPS) Normal PPS Normal Quality Event PPS Event Quality 16CH NTSC:7.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 30 3.6.5 T o Record Event V ideo Only If you want your DVR unit to start reco rding only under the alarm i s triggered, follow the steps: • Enter the OSD setup menu with correct password.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 31 The available view formats are illu strated in the following figure. . Note that 3x3 and 4x 4 viewing modes are for DVR-16TN model only . 4.1.2 Digit al Zoom Users are able to view a 2 × full screen in live m ode.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 32 4.1.4 V iewing Recorded V ideo T o view recorded video, the user c an press the PLA Y/STOP key directly . When the PLA Y/ST OP key is pressed, t he unit st arts to continue playing back the recorded video from the suspended point of record.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 33 Pause Playback and Single S tep Forward T o p ause and resume recor ded video, follow these steps. • Press one of the CHANNEL keys to display the corresponding camera in full screen.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 34 Press CALL key for 3 seconds, the BNC Monitor will be given the same function as the VGA Monitor , except Playback and Search function.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 35 Follow the steps below to control the call monitor . • Press the CALL key on the front panel to enter call monitor control mode, the message “Call Mode” will then be shown on the bottom-left of the screen.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 36 4.3.1 Searching by T ime Follow these steps to search video by date and time. • Press SEARCH key to enter the Sear ch menu; the From T ime and End T ime of the available video is listed on top of the screen.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 37 Follow these steps to search ev ent video through the Event List: • Press SEARCH to enter the Search menu. • T o search event video that has been recorded on a specific camera, use LEFT / RIGHT to move the cursor and press ENTER to select or de-select a channel.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 38 From the Main menu, select <V ideo Export> and press ENTER. The menu is displayed below . Video Export 1. Select Device 2. Select Ch: 3. From 4. T o 5. Select Events 6.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 39 4.4.1.2 Select V ideo for Exporting After selecting video clip s, set the item <Begin Export> to <YES> and press ENTER to start exporting. Following ar e the menu items for selecting video.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 40 4.4.1.3 Digit al Signature The user can export a video clip with or without a digital signature. Set the item to <YES> to export with the signat ure file, or <NO> to export without the signature file.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 41 Export may take you about 10 minutes to 1 hour depending on the file size of the video.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 42 • Press COPY again on the point that y ou want to set the end point of the export. Now , the “ezBurn” window displays as shown below . The information shown on the window is for read only .
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 43 • Press ENTER to start to export the event video to the connected external device; or , press ESC to abort. NOTE: The inserted CD will be ejected when it s capacity is 99% full.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 44 4.6 Dome Control The DVR-4TN/8TN/16TN/16TS/16TT series unit allows the user to control a dome camera at the front panel. In Live mode, the user can press the CHANNEL key to display the appropriate dome camera in full view .
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 45 4.6.2 Dome Protocol Setup The Dome Protocol menu item lists the dome protocols available for communicating with dome cameras connected to the DVR-4TN/8TN/16TN/16TS/16TT series unit.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 46 Users are allowed to change t he RS-485 settings of the DVR-4TN/8TN/16TN/16TS/16TT series unit. Select <System Setup> in the Main menu, then select <RS485 Setup> from the System Setup menu and press ENTER.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 47 T oggle Hint Screen This function is used to avoid viewin g the dome parameter information while controlling the dome camera. Press this key to hide the screen. Press it again to redisplay the screen.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 48 4.6.5 Setting Preset Point s The DVR-4TN/8TN/16TN/16TS/ 16TT series unit allows user to set preset positions; the amount of preset poi nts allowed depends on the dome manufacturer .
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 49 4.6.6 Calling Preset Point s Follow these steps to call preset point s. • Press a Channel key to view the corresponding camera in full screen. • Then press DOME to ent er dome control mode.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 50 After entering the correct p assword, the Main menu is displayed. Key Usage in OSD Menu <Direction Keys> In the OSD menu, Direction keys are used to move the cursor to previous or next fields.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 51 <T o input characters> Move the cursor by pressing Direct ion keys and press ENTER to select characters. <T o move the cursor in title entry> Press MODE and LEFT / RIGH T simult aneously to move the cursor to left / right in the title entry .
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 52 5.1.1 V ersion The V ersion menu allows the user to view system information such as hardware and software versions. From the System Setup menu, select <V ersion> and press ENTER.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 53 NOTE: If you want to upgrade y our unit with a USB ThumbDrive ® contains the newest sof tware, make sure the software you want to use to update the unit should be fold into a folder named “upd-200s”, otherwise, the unit cannot recognize it.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 54 5.1.3 Date / T ime The user can set the current date, time and other OSD parameters in this menu. The Administrator ’s privileges ar e required for entering the submenu.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 55 5.1.3.3 Date Display Mode This function allows the user to set the OSD display type for the date / time. There are three options to select from: <Y/M/D>, <M/D/Y> or <D/M/Y>.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 56 5.1.3.8 DST Bias This item allows the user to set the amount of time to move forward from the standard time for daylight saving time. A v ailable options are <30>, <60>, <90> and <120> minutes.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 57 5.1.5 Password The Password menu allows administrator to change t he password settings for accessing the unit. Select <Password> in the System Setup menu and press ENTER; the menu displays as follows.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 58 5.1.5.3 Load Factory Password This item allows the administrator to reload the factory password incase the administrator cannot reme mber the password.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 59 5.1.6.1 LAN Select PPPoE stands for Point-to-Point Prot ocol over Ethernet, which is a specification for connecting the users by Ethernet to the Internet through a common broadband medium.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 60 If the DHCP is enabled (ON), a dynamic IP will be assigned to the DVR-4TN/8TN/16TN/16TS/16TT series unit.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 61 - DNS DNS is the abbreviation for “Domai n Name System”, which is an Internet service that translates domain names into IP addresses because domain names are easier to remember .
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 62 • When done, move the cursor to <OK> and press ENTER to save the settings and exit. - PPPoE Password This item allows the user to setup the PPPoE password.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 63 NOTE: The Dial-in Service is not av ailable if there is no modem connected to the unit. In Network Setup menu, se lect <Dial-in Setup> and press ENTER to enter the Dial-in menu.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 64 • Use Direction keys to move the cu rsor to the desired character . • Press ENTER to add the selected charac ter to the username entry field. • When done, move the cursor to <OK> and press ENTER to save the settings and exit.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 65 - Client IP This item determines the remote PC ’ s IP address for connecting with the DVR-4TN/8TN/16TN/16TS/16TT series unit. T o set the Client IP , follo w these steps: • Select <Client IP>.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 66 In the Network Setup menu, select <Dial-out Setup> and press ENTER to enter the Dial-out menu. T he menu displays as follows. Dial-out Setup 1. Dial-out DHCP 2.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 67 - Dial-out Netmask This item is for setting the Netmask that identifies the DVR-4TN/8TN/16TN/16TS/16TT series unit over a modem connection. T o configure the item, DHCP must be set to <OFF>.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 68 - Dial-out Account This item enables the user to set t he Dial-out user name, which is needed for dialing out to Internet Service Provider server . Cont act your network service provider for more specific information.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 69 - Dial-out Idle T ime This item indicates the longest amount of time that the modem connection remains active if there is no acknowle dgement from the remote pc. The value can be set from 1 min to 600 min.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 70 5.1.6.7 SMTP Setup Simple Mail T ransfer Protocol (SMTP) is a protocol for sending e-mail messages between servers. SMTP is a relatively simple, text-based protocol, where one or more recipients of a message are specified and the message text is transferred.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 71 - SMTP Server This item enables the user to set t he SMTP server . Contact your network service provider for more specific information. Follow these steps to setup the SMTP Server .
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 72 - SMTP Account This item allows user to setup the SMTP usernam e. Follow these steps to setup the login password. • Select <SMTP Account> from SM TP Setup menu and press ENTER.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 73 Select <DDNS Setup> from Networ k Setup and press ENTER. The menu displays as below figure. DDNS Setup 1. Enable DDNS 2. Host Name 3. DDNS Port 4. Submit/Update NO 80 NO - Enable DDNS This item is used to enable or disabl e the Dynamic Domain Name Service.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 74 NOTE: No any two DVR-4T N/ DVR-8TN/ DVR-16TN series units should be set the same Host Name. - DDNS Port This item allows the user to set up the port for DDNS. Press UP / DOWN Direction keys to change the port.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 75 5.1.7.3 Bit s The user can specify the bits in a word that are associated with this protocol. The available options are <6>, <7> and <8> bits. The default is <8> bits.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 76 5.2 Monitor Setup The Monitor Setup menu allows user to set the quality of the displayed image. Select <Monitor Setup> from the Ma in menu and press EN TER.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 77 5.2.5 Screen Center Adjust This item is used to adjust the screen c enter of the main monitor display area. Follow these steps to set the center point. • Select <Screen Center Adjust> from the Monitor Setup menu and press ENTER.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 78 5.3 Camera Setup The items in the Camera Setup m enu enable the user to set camera parameters, including camera titl e, dome protocol and ID for each connected camera.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 79 5.3.4 Camera T itle This item allows the user to change the title of eac h camera connected to the unit. By default, the titles of came ras are numbered from 1 through 16 respectively .
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 80 T o set a camera to be covert, follow these step s: • Select the channel that you want to be covert from the <Channel Select> item. • After selecting the channel, move the cursor to <Covert> item and select <YES>.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 81 5.3.1 1 Audio Association This item is used to establish the connection between the selected camera and the two audio-in channels.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 82 5.4.1 Record Mode This item is for you to preset the resolution and recording rate of normal record and event record. The relative re cord settings, such as uration, will follow the record mode setting.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 83 5.4.2.1 Day / Night T ime S t art / End The Day/Night S tart T ime determines t he durion of day/ night recording time. T ime is indicated in 1-minute increment s. The time display format in this menu is based on the setting of T ime Display Mode.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 84 5.4.4 Per Camera Configuration This submenu is used to set the Day / Night / Weekend PPS (Picture per Second) and recording quality for each ch annel. The <Preset Configuration> must be set to <OFF> for accessing these schedules.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 85 5.4.4.4 Event Max PPS Event Max PPS is used to set the event recording rate for Event status. Normally , the Event PPS is set to be equal to or greater than Normal PPS; the setting depends on your application.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 86 Follow these steps fo r ezRecord Setup: • Select <How Many Days T o Re cord> and press ENTER, then press UP/DOWN to choose the option you want.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 87 5.4.7 Pre-Alarm Recording This item is used to set the duration ti me of pre-alarm recording video. The pre-alarm recording function aims to gi ve the user the opportunity to view a more complete event video.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 88 5.4.10 Purge Dat a This item is used to delete the Normal or Event recording video. In Record Setup menu, move the cursor to <P urge Data> and press ENTER; the Purge Data menu is displayed.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 89 5.5 Sequence Setup The Sequence Setup menu allows the user to set the camera sequence schedule and dwell time for main and call monitor . Select <Sequence Setup> in Main menu and press ENTER; the menu displays as follows.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 90 A sequence can have up to 16 entries. The user can select fewer than 16 entries for a camera sequence and leav e the remaining entries blank. The sequence can include a specific camera or cameras multiple times.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 91 5.6.3 Email Notice The item enables (ON) / disables (OFF) the Email notification of an event. When an alarm event is triggered and <Email Notice> is enabled, an e-mail concerning the alarm event will be sent.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 92 5.6.6.1 Channel Select This item is used to select a desired channel for setting the parameters. Move the cursor to <Channel Select> and pr ess ENTER, then select a channel using UP / DOWN keys.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 93 - Detected Area Setup The Detect Area is displayed as follows af ter selecting this item. The detection area consists of 273 (21 × 13) detection grids in NTSC video format or 336 (21 × 16) grids in P AL format.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 94 5.6.6.5 Alarm In This item allows the user to enable / disable alarm input detection. According to your application, sele ct <N/O> (Normal Open) or <N/C> (Normal Close) to enable the alarm input detection or select <OFF> to disabl e detection.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 95 5.7.1 T ot al / Free Size of HDD The T ot al Size of HDD shows the tota l capacity of the HDD that has been added into database. The Free Size of HDD indicates the free space lef t for recording onto the HDD in database.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 96 NOTE: Before removing external devices from the unit, remember to remove the device from dat abase . 5.8 Configuration The Configuration menu can be used to restore the def ault factory settings, import and export configurations.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 97 NOTE: If the imported configuration has a different record mode from the unit’ s, the warning message “This config has different record mode. This will FORMA T ALL HARDDISKS.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 98 5.8.3.3 Begin Export Select <YES> to begin exporting the configuration file, or <NO> to abort the export.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 99 Items in the menu will be descri bed in the following section. 5.9.1 Select Device The external devices that are available for export ing video will be listed by name and free space size in Select De vice menu.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 100 5.9.3 From / T o T ime The items are used to set the time whic h data export begins and ends. Move the cursor using Direction keys, and pr ess ENTER to select the date / time items; adjust the selected date and time value by UP / DOWN keys.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 101 5.9.6 Digit al Signature The Digital Signature functi on enables the user to export a video clip with the unit’ s unique signature key . It aims to authenticate a video clip exported from the unit and prove it has not been modifi ed.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 102 Power Off Select this item to shut down the unit. Do not remove the power during shut down until the message “Y ou can safely turn off DVR now!” displays. Reboot Select this item to reboot the unit.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 103 Appendix A: Technical Specifications All specifications are subj ect to change without notice.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 104 Remote Operation Monitoring, Playback, Record ing, System Setup, Dome Camera Control RS232C D-sub 9 pin female.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 105 Appendix B: Record Configuration 1. The following three tables are offered fo r users who useDVR-4TN/ 8TN/ 16TN unit.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 106 Record Mode: Half-D1 m ode (NTSC: 720 × 240@60PPS) (P AL: 720 × 288@5 0PPS) Preset Item Normal PPS Normal Size Ev ent PPS Event Size Event Active 4ch NTSC:15 P AL:12.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 107 2. The following three tables are offere d for users who use DVR-16TS unit. Record Mode: Full-D1 mode (NTSC: 720 × 480@60PPS) (P AL: 720 × 576@50PPS) Preset Item Normal PPS Normal Size Event PPS Event Size Event Activ e Best Quality 16ch NTSC:3.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 108 3. The following three tables are offe red for users who use DVR-16TT unit. Record Mode: Full-D1 mode (NTSC: 720 × 480@120PPS) (P AL: 720 × 576@100PPS) Preset Item Normal PPS Normal Size Event PPS Event Size Event Activ e Best Quality 16ch NTSC:7.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 109 Appendix C: Record Duration The record duration relates to recording ra te, image quality and HDD capacity . Refer to the following table. NOTE: Record duration times are based on ac tual tests and represent average file sizes.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 1 10 Number of Days of Recording 720 X 240 @ 60PPS ( without Audio) Recording Rate Recording Picture Quality Mode .
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 111 600 GB Internal Storage 120 100 27.9 33.5 11 . 2 13.4 7.0 8.4 5.1 6.1 4.0 4.8 60 50 51.4 61.7 22.0 26.5 14.0 16.8 10.3 12.3 8.1 9.7 30 25 102.9 123.5 44.1 52.9 28.1 33.7 20.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 1 12 Appendix D: Dial-up Connections via Modem A dial-up modem connection allows the user to use the remote software and receive alarm notice without a direct Inter net connection.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 11 3 • Set up the network connection type. Sele ct <Connect to the Internet> and click <Next> to continue. • Select <Set up my connection manual ly> and click <Next> to continue.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 1 14 • Select <Connect using a dial-up modem > to connect to the Internet through a phone line and a modem. Click <Next> to continue. • T ype the name of the c onnection you are creating.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 11 5 • Enter the Username and Password that is set up in the Dial-in Setup menu.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 1 16 • Now the dial-in connection is est ablished. Est ablishing Dial-out Connection The Dial-out function enables t he user to establish dial-up modem communication to and from the DVR-4TN/8TN/16TN/16TS/16TT series unit for remote notification use.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 11 7 PC Configuration: • Click <Start>, <My Network Places>, <View Network Connections> and then select <Create New Connection>. The New Connecti on Wizard is displayed.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 1 18 • Choose the modem device that will be used by the PC and click <Next>. • In Incoming VPN Connection menu, c hoose <Do Not allow virtual private connections> and click on <Next>.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 11 9 • In User Permission menu, select the us ers that will be using this connection. If needed, add a new user with the same user password t hat is set up in the Dial-out Setup menu in local DVR.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 120 • In TCP/IP address assignment, if t he PC has DHCP server , then choose <Assign TCP/IP addresses automatically using DHCP>, or choose <S pecify TCP/IP addresses> and enter the range of IP addresses that you wish to use.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 121 • The Incoming connection is established..
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 122 Appendix E: Verifying Digital Signature The digital signature aims to authenticate a video file exported from the unit. Follow the instructions to export video with a digital si gnature and to verify the digit al signature.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 123 • Click <Browse> to select the *.gpg, *.dr v , *.sig files respectively , which belong to the exported video you want to authenticate. • Click <V erif y> to start veri fying the digit al signature.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 124 • The result of verificati on shows in the <S tatus Log> field. It returns a GOOD or BAD signature result. A GOOD signature indicates the exported clip has not been altered.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 125 Appendix F: Alarm I/O Pin Definition The tables below list the pin definitions of alarm I/O located on the rear panel of the DVR-4TN/8TN/16TN/16TS/16TT series unit.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 126 DVR-16TN/16TS/16TT Alarm I/O Pin Definition Pin Definition Pin Definition 1 RS485 D+ 12 N/A 23 Alarm In 7 2 RS.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 127 Appendix G: Hard Disk Installation The following steps describe how to install HDD(s) to your DVR-4TN/8TN/16TN/16TS/16TT unit. Step 1: Disconnect power from the unit. Remove the 8 screws that hold the top cover in place(3 on each side, 2 in the rear).
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 128 Step 2: Assemble the HDD to the bracket Figure 4: The component s Figure 5: Att ach the HDD to the bracket Fig.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 129 Step 3: Inst all the HD D on your unit Figure 7: Wiring th e two set s of HDD’ s Figure 8: Connect the wire Figure 9.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 130 Figure 10: Close your case Step 4: Confirm if the HDD has been detected.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 131 Appendix H: HDD PC Player Tool Introduction For some specific reasons, users may need to view the stored data in the HDD on Personal Computer; this document guides you how to do that step by step.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 132 Step 4. Click <S tep1> sheet, and then choose <I nstall to System Root> and <S tart drive on boot> options. When done, click <Install Drive> button.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 133 Ste p 8 . Click <S tep1> sheet, and then choose <I nst all to System Root> and <S tart drive on boot> options. When done, click <I nstall Drive> button.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 134 Ste p 4 . Click the “Playback” to play the video directly or “Export” if you want to save the *drv file into your PC.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 135 Appendix I: IR Remote An IR Remote will be attached in the content box and deliver to you with your DVR-4TN/ DVR-8TN/ DVR-16TN.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 136 Appendix J: ezRecord Diagram Sample.
User ’s Manual DVR-4TN/8TN/16T N/ 16TS/16TT Series SPECO TECHNOLOGIES 01/06 137.
U s e r ’ s M a n u a l DVR-4TN/8TN/16T N/16TS/16TT Series SPECO TECHNOLOGIES 01/06 138.
Ein wichtiger Punkt beim Kauf des Geräts Speco Technologies DVR-16TT (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Speco Technologies DVR-16TT noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Speco Technologies DVR-16TT - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Speco Technologies DVR-16TT reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Speco Technologies DVR-16TT erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Speco Technologies DVR-16TT besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Speco Technologies DVR-16TT verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Speco Technologies DVR-16TT. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Speco Technologies DVR-16TT gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
