Benutzeranleitung / Produktwartung P4X400 des Produzenten SOYO
Zur Seite of 103
Congratul ations on your new pur chase of SO YO P 4X400 Ser ies moth erboard fo r the Intel pla tform! This ne w mother board offers suppor t f or ul tra fast DDR400 memory .
SY -P4X400 DRAGON Lite Motherboard ************************** ************************** mPGA Socket 478 Processor supported VIA P4X400 AGP/PCI 400/533 MHz Front Side Bus supported A TX Form Factor **.
SOYO ™ SY -P4X400 DRAGON Lit e iii Copyright © 2002 by S OYO Computer Inc. T rademarks: SOYO is th e reg istered t rademark of SOYO Comput er Inc. All trademarks are t he properties of their owners. Pr oduct Rights: All names of the product and corporate ment ioned in thi s publication are used for identification purposes only .
T able of Conte nts SY -P4X400 DRAGON Lit e iv T able of Co ntents CHAPTER 1 MOTHERBOARD DESCRIPT ION............... ............... 1 1-1 INTRODUCTION........ ...................................... ............... 1 1-2 UNP ACKING THE MOTHERBOAR D ..
T able of Conte nts SY -P4X400 DRAGON Lit e v APPENDIX A TROUBLE SHOOTING A T FIRST ST AR T . ............. 91 APPENDIX B CONT ACT INFORMA TION .......
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 1 Chapter 1 MOTHERBOA RD DE SCRIPTION 1-1 INTRODUCTION The SY -P4X400 DRAGON Lite AGP slot/PCI Motherboard is a high-performance Socket 478 processo r supported A TX form-factor system board. The SY -P4X400 DRAGON Lit e uses VIA Chipset tech nology and supports S ocket 478 c lass proce ssors.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 2 One Heat Sink Compoun d One Back Panel Wa r n i n g : Do not unpack the Mot herboa rd from i ts anti- stati c packaging unt il you are rea dy to install it. Like most electronic equipment, y our Motherboar d may be damage d by electrost atic discharge.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 3 This ensures that the SY -P4X400 DRAGON Lite has a n overwhelming overc lock ing p oten tia l. CPU M ultip lier The SY -P4X400 DRAGO N Lite support s a wide range of multipliers: 10X ~ 24X depe nd on CPU.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 4 LAN ON-BOARD Supports 10/ 100 Mbps base-T Ethe rnet . Use the Realt ek R TL8100B chipset. ADV ANCED FUNCTIONS The SY -P4X400 DRAGO N Lite su.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 5 SOYO Bonus Pack CD-ROM COMPLIANCE The SY -P4X400 DRAGON Lite co mplies with all importan t industry standard s. The following under lines the r eliabili ty of the SY -P4X400 DRAGON Lite , a motherboard to trust.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 6 1-4 HANDLING THE MOTHERBOARD T o avoid dama ge to your Mothe rboar d, fol low the se sim ple ru les wh ile unpacking: Before han dling the Mo therboa rd, ground yoursel f by grasping a n unpainte d portion of t he system's met al chassis.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 7 1-6 SY -P4X400 DRAGON Li te MOTHERBOARD LA YOUT Back Panel SY -P4X400 DRAGON Lite Platform USB 1_2 LAN PS/2 KB Connecto r PS/2 Mous e PS/2 Mous e Co.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 8 1-7 SY -P4X400 DRAGON Lite MOTHERBOARD COMPONENTS A BC D E FG H I J K L M N O P Q R S T U V W X Y Z AGP Sl ot.
Motherboar d Descripti on SY -P4X400 DRAGON Lit e 9 A +12V Power Conne ctor B Fro nt pane l C onnectors C Chassis Cooling Fan Connector D Socket 478 Connector E VIA P4X400 North Bridge Chip F CPU Cool.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 10 Chapter 2 HARDWARE IN STALLATION Congratul ations on your pur chase of S Y -P 4X400 DRAGO N Lite Motherboar d.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 11 2-2 IN ST AL LA TION GUI DE W e will now begin the installation of the Motherboar d. Please follow the step-by-step p rocedure designed to lead yo u to a complete an d correct install ation.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 12 STEP 1 Inst all the CPU CPU Mount Procedur e: T o mount the Pentium ® 4 Socket mPGA478 processor that you have purchas ed se pa rately , follow thes e instruct ions. 1. Lift the socket han dle up to a vertical positio n.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 13 3. S eat the proc esso r in th e sock et co mple tely a nd w itho ut forc ing. 4. Then close the socket hand le to secure the CPU in place. Remember t o connect the CPU Cool ing F an to t he appr opriat e power conn ector on the Motherboard.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 14 S tep 2 Inst all Memory Module Y our boar d co mes wit h thre e DIMM socket s, pr oviding suppor t f or up to 3GB of main me mory usin g unbuffe red a nd non-ECC DIMM modul es fr om 64MB to 1GB.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 15 Memory Config uration T a ble Nu mber o f Memo ry M odu les DIMM 1 DIMM 2 DIMM 3 RAM T ype DDR SDRAM (Un-buffered and Non-ECC) Memory Module S ize (MB) 64/128/256/512 MB/1 GB S tep 3 Inst all Exp ansion Card The mothe rboa rd has 1 AGP slot and 5 PCI slot .
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 16 AGP Slot This moth erboard suppor ts AGP 4x/8x VGA CARD. When 8x VGA card is used, “A GP mode” opt ion in t he BIOS will be disabled and t he “DBI Output for AGP T rans” option will appear .
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 17 S tep 4 Connect cables, case wires, and power supply A. IDE Device Inst allation (HDD, CD-ROM) This Mot herboard offers two pr imary a nd secondary IDE devi ce connecto rs (IDE1, IDE 2).
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 18 B. Floppy Drive Inst allation The system support s 5 possible fl oppy dri ve types: 720 KB, 1.2 MB, 1.44 MB, 2.88 MB, and LS-120. Connect one side of the 34-pin f lat cable to the f loppy dr ive and pl ug th e other end to the floppy drive connector on the Motherboard.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 19 C. Front Panel Connections Plug the comput er case's front panel devices to the corre sponding headers on the Mot herboard . 1. Power LED & KeyLock Plug the Power LED cabl e into the 5- pin Keyloc k header .
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 20 2. Reset Plug the Reset push-button cable into the 2-pin Reset h eader on the Mo therb oard . Push ing th e Re set bu tto n on the front pane l will cause the system to restar t the boot- up sequence.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 21 5. A TX Power On/Off S witch Atta ch the 2-pin mo ment ary type swi t ch to the PWRBT header fo r turning On or Off your A TX powe r supply .
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 22 1. Onboar d Serial Por ts COMA/ COMB External periph erals that use seri al transmission scheme include: - serial mouse, - and modem. Plug t he seria l device cable s dire ct ly into the COMA/COMB 9-pin male connectors loc ated at the rear p anel of the M otherboard.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 23 5. Universal Serial Bus (USB1/USB2, USB20 _1/USB20_2) This Mot herboard pr ovides f our USB port s for your additi onal devi ces. Plug the USB device jack into the availab le USB connector USB1 or USB2.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 24 E. Other Connections 1. W ake-On-LAN (WOL) Attach the 3-pin conn ector from the LAN card which supports the W ake-On-LA N (WOL) function to the JP1 0 header on the Motherboard. This WOL fu ncti on lets use rs wake up t he connected computer through the LAN card.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 25 2. S tand ard Infrared (SIRCON) Plug th e 10-pin i nfrar ed device cabl e to the SIRCON he ader . This will enable the infrared transf er functi on. This Motherboard meet s both the ASKIR and HPSI R speci ficati ons.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 26 3. Coolin g Fan Installation (1) CPU Cooling Fan (CPUF AN1, CPUF AN2) Afte r you have seat ed the CPU pr operl y on the pr ocessor , att ach the 3- pin fan cable to the CPUF AN connector on the Motherboard.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 27 (2) Chassis Cooling Fan (CHA F AN1, CHAF AN2, CHAF AN3) Some chassis also feature a co oling fan. This Motherboard features a CHAF AN con nector t o provide 12V powe r to the chassis fan.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 28 4. CD Line-in (CDIN1,CDIN2) This Motherboard provi des one CD-Lin e in connectors. Please connect the 4-pin audi o cable from your CD-ROM drive t o either CDIN2.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 29 5. SPK5(optional) Connect one end of t he Audio flat cable to SPK5 connector in the motherboar d, and the ot her end t o the small audio conn ector .
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 30 6. MIC & LED Connector (J30) Y ou can c onne ct th e Line -out / MIC i n/LAN L ED t o the front panel of your PC case.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 31 F . A TX Power Supply Use power supply specifically for P4 M /B. (A TX 12V power supply) The A TX12V power supply includes a 2 0-pin A TX connector that comply with the A TX spec ific ation, V ers ion 2.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 32 3.3V -12V GND PS -ON GND GND GND -5V 5V 5V 3.3V 3.3V GND 5V GND 5V GND PW- OK 5VSB 12V AT X P o w e r Wa r n i n g : Fol low these pr e.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 33 G . CMOS Clear (JP5) In some cases the CMO S memory may contain wro ng data, follow the step s below to c lear the CMOS m emory . 1. Clear t he CMOS memor y by momenta rily shor ting pi n 2-3 on j umper JP5.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 34 Audio Upgr ade The standar d configura tion of P4X400 DRAGON Li te mother board supports 2 or 4-cha nnel audi o. T o upgrade your DRAGO N Plus on- board audio to 5.1-channel and enjoy digit a l sound quality , simply a dd a SPDIF audio conn ector to the moth erboard.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 35 Note : If you have f ailed t o enter th e BI OS, wait unt il th e boot up sequence is comp leted. Then pu sh the RESET button and press <DEL> key agai n at the begi nning of boot-up, during dia gnostic checks.
H a rd w a re I n s t a l l a t i o n SY -P4X400 DRAGON Ultra 36 ent er the A ward BIOS Se tup p rogram. The CM OS SETUP UT ILITY will be sho wn on the sc reen.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 37 Chapter 3 BIOS SETUP UTILITY This Moth erboard's BI OS setup progr am uses t he ROM PCI BIOS program from A ward Software Inc. T o enter the A ward BIOS program 's Main Me nu: 1. T urn on or reboot the syst em.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 38 Hot Keys: Function keys gi ve you acces s t o a group of commands throughout t he BIOS utilit y . Function Comman d Description F1 Gener al Hel p Gives the list of opti ons available for each item. F5 Previous Va l u e s Restore the old values.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 39 SA VE AND EXIT SETUP Select th e [SA VE & EX IT SETUP] option fro m the Main Menu to save data to CMOS an d exit th e setup utility . This option saves all your changes and causes the system to reboot.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 40 3-1 SOYO CO MBO SETUP This Motherboar d does not use any hardware jumpers t o set the CPU frequency . Instead, CPU settin gs are software confi gurable wi th the BIOS [SOYO COMBO SETUP].
BIOS Setup Utility SY -P4X400 DRAGON Lit e 41 System Performance Setting Descriptio n Note Normal Default Fast System Performance Tu r b o Adjust your computer performance.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 42 CPU Vcore Select Setting Description Note Default Defa ult CPU Vcore Select 1.100V , 1.125V , 1.150V , 1.175V , 1.200V , 1.225V , 1.250V , 1.275V , 1.300V , 1.325V , 1.350V , 1.375V , 1.400V , 1.425V , 1.450V , 1.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 43 Onboard 6Ch H/W Audio Setting Description Note Enable d Defa ult Onboard 6Ch H/W Audio Disabled Enabled/ Disabl ed Onboard 6Ch H/W Audio. Onboard (10/100) LAN Setting Description Note Enabled Default Onboard (10/100) LAN Disabled Enabled/Di sabled Onboar d LAN.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 44 System Boot Co ntrol Settin gs Setting Description Note Floppy LS120 HDD-0 SCSI CDROM HDD-1 HDD-2 HDD-3 ZIP100 USB-FDD USB-ZIP USB-CDROM USB-HDD LAN First.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 45 3-1.1 Advance T urn-up Settings Caution: Change these se ttings only if you are already familia r with the C hip set. The [Advanc ed T urn- up Settings ] option cha nges the val ues of the c hipset registers.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 46 DRAM T iming/Drive Control Setting Description Note DRAM Timing By SPD Defa ult Manual If enable the D RAM will auto detect the DRAM timing. SDRAM CAS 2.5 Defa ult Latency 2 When synchronous DRAM i s install ed, the number of clock cycles of CAS lat ency depends on t he DRAM ti ming.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 47 3-2 ST ANDARD CMOS SETUP Select the [ST ANDARD CMOS SETUP ] option fr om the Main Menu and press [Enter ] key .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 48 This M ain M enu fu nction auto matica ll y detects the har d disk type and configures the [S tandard CMOS Features] accordingly .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 49 Hard Disks T ype & Mode Choose the type a nd mode for t he hard disks that you have already inst alled.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 50 Others Optional Setting Description Note EGA/VGA Default CGA 40 CGA 80 Vi d e o MONO (Monochr ome) Selec t the v ide o mo de. ALL Err ors Default No Errors All, But Keyboard All, But D iskette Halt On All , But Di sk/Key When th e BIOS detec ts system errors, this fun ction will s top the syste m.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 51 3-3 ADV ANCED BIOS FEA T URES Select the [Advanced BIOS Feature s] option from t he Main Menu and pr ess [Ente r] key .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 52 Cache Memory Options Setting Descrip tion Not e Dis abl ed CPU L1 & L2 Cac he Enabled Enables the CPU's L1 & L2 cache. Default Dis abl ed Default Swap Flopp y Drive Enabled Boot Up Floppy Seek Setting Description Note Disabled Se eks disk drives duri ng boot up.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 53 T ypematic Settings Ty p e m a t i c S e t t i n g s Setting Descri ption Note Disabled Keystr okes repeat at a r ate dete rmin ed by the keyboard. Defa ult Ty p e m a t i c Rate Se tting Enabled When enabled, th e type matic rate and type matic dela y c an b e selected.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 54 Security Option(Continue) Setting Descriptio n Note Disabled ACPI Mod e Enabled Enabled the A dvanced Programma ble Interrupt Controlle r (APIC) mode. Defa ult 1.1 Defa ult MPS V ersio n Cont rol fo r OS 1.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 55 3-4 ADV ANCED CHIPSET FEA TURE S Select the [A dvanced Chip set Features] option from th e Main Menu an d press [Enter ] key . Caution: Change these se ttings only if you are already familia r with the C hip set.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 56 3-4.1 AGP & P2P Bridge Control Caution: Change these se ttings only if you are already familia r with the C hip set. The [AGP & P2P Bridge Control] o pti on changes the v alues of the ch ipset registers.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 57 AGP & P2P Bridge Control (Continue) Setting Descript ion Note Auto Def aul t AGP Dri ving Cont rol Manual This item allo ws you to adju st the AGP driving force. Choose Manu al to ke y in a AG P Driving V alue in the n ext selec tion.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 58 3-4.2 CPU & PCI Bus Contro l Caution: Change these se ttings only if you are already familia r with the C hip set. The [CPU & PCI Bus Cont rol] option changes the values of the chipset registers. These reg isters control the system options in the c omputer .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 59 3-5 INTEGRA TED PERIPHERALS Select the [In tegrated Peripher als] option fr om the Main Me nu and press [Ente r] key . Caution: Change these se ttings only if you are already familia r with the C hip set. The [INTEGRA TED PERIPHERALS] opti on changes the values of the chipset regi sters.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 60 INTEGRA TED PERIPHERALS (Continue) Setting Description Note All Disabled OnChip USB Cont rolle r All En able d This sho uld be enable d if your system has a USB installed on the system board and you want to use it.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 61 3-5.1 VIA On Chip IDE Device Caution: Change these se ttings only if you are already familia r with the C hip set. The [VIA On Chi p ID E De vice ] op tion ch anges the va lues o f the ch ipse t registers.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 62 VIA OnChip IDE Device Setting Description Note Disabled T urn of f the on -board ID E. On-Chip PCI IDE Primar y Second ary Enabled Use the on-board IDE.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 63 3-5.2 SuperIO Device Caution: Change these se ttings only if you are already familia r with the C hip set. The [SuperIO Devi ce ] op tion ch ange s th e values of the chipset registers. These registers control the syst em options i n the computer .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 64 SuperIO Devic e Setting Description Note Disabled T urn off the on-boar d floppy controller . Onboard FDC contro ller Enable d Use the on-board fl oppy contr oller .
BIOS Setup Utility SY -P4X400 DRAGON Lit e 65 3-6 POWER MA NAGEMEN T SETU P The [POWER MANAGEMENT SETUP] se ts the system 's power saving functions.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 66 Power Management Controls Setting Description No te S1(POS) Defa ult S3(STR) ACPI Su spend Ty p e S1 & S3 The system w ill enter the S1 state during suspend.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 67 Power Management Controls (Continue) Setting Description Note 3 Default MODEM Use IRQ 4- 1 1, NA Assigns an IRQ# to the modem device. Delay 4 Sec. T urns off the s ystem power 4 seconds after pushing the power button.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 68 IRQ/Event Activity Detect Setting Description Note Hot key Default PS2K B W akeup Select Password Y ou can boot-up y our syste m by PS/2 K/B VIA hotkey or password. Disabled Default Ctrl+F1 ~ F12 Power Wa k e PS2K B W akeup from S3/S4/S5 Any Key Y ou c an s et the follo wing hotk ey : 1.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 69 3-6.1 IRQs Activi ty Monitoring This option sets the IR Qs Activity Monitoring. CMOS Setup Utility – Copyright ( C ) 1984-2002 A war d Softwar e IRQs Ac.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 70 3-7 PNP/PCI CONFIGURA TIONS This option sets the Mo therboard’ s PCI Slots. CMOS Setup Utility – Copyright ( C ) 1984-2002 A war d Softwar e PNP/PCI C.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 71 PNP/PCI Configuration Controls PNP/PCI Cont rols Setting Descriptio n Note Ye s Set this field to [Y es] if you are runni ng W indows 95, whic h is Pn P com patib le. PNP OS Installed No If the OS you are r unning does not support PnP confi gurati on.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 72 PNP/PCI Configuration Setup (Continue) PNP/PCI Setup Setting Descriptio n Note How to set the BIOS to r elease the IRQ to the PnP Interrupt pool: Interrup.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 73 3-8 PC HEAL TH ST A TUS This option sets the Mother board's PC Health Status. CMOS Setup Utility – Copyright ( C ) 1984-2002 A war d Softwar e PC Health S tatus Shutdow n T emper atur e Disabled Item Help Vcore 1.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 74 CPU Device Mo nitoring (Contin ue) Setting Descripti on Note Vcor e, +3.3V , +12V V Show the cur rent volt age status. CPU Te m p e r a t u r e ° C/ ° F Show the current stat us of CPU temperature. CHA Te m p e r a t u r e ° C/ ° F Show the current stat us of th e System temperature.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 75 3-9 LOAD F AIL-SAFE DEF AUL TS Select the [L oad Fail-Safe Defaul ts] option fro m the Main Men u to load a pre-defined safe bios settings.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 76 3-10 LOAD OPTIMIZED DEF AUL TS Select the [Load Opti miz ed Defa ults] opti on f rom t he Main Me nu to l oad a pre-defi ned optimi zed BIOS set tings.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 77 3-11 SET SUPER VISOR P ASSWORD Based on the set ting you have made in the [Secur ity Option ] of the [BIO S FEA TURES SETUP] section, the passwor d prevents access to the system or the set up program by unauthor ize d users.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 78 3. Enter your new pa ssword and press [Ent er]. The following message appears, prompti ng to confi rm the new password: 4.
BIOS Setup Utility SY -P4X400 DRAGON Lit e 79 BOOT MENU Boot Me nu enable s user to boot-u p on diff ere nt boot dev ice wit hou t going into the BIOS setup. T o enable boot Menu, pr ess “ESC ” after memory initializa tion, user w ill see a devic e menu, in whic h user can choose the device they wish to boot fr om.
Drivers Installation SY -P4X400 DRAG ON Lit e 80 Chapter 4 DRIVERS INSTA LLATION The SOYO-CD wi ll Auto Run only in W indows Base Operating System. Y our SY -P4X4 00 DRAGON Li te Mother board c omes wit h a CD-ROM labeled "SOYO CD." Th e SOYO CD contains a.
Drivers Installation SY -P4X400 DRAG ON Lit e 81 The user's m anual files included on th e SOYO CD are in PDF (Po stscript Document) form at. In order to read a PDF file, the appropriate Acrobat Reader software must b e inst alled in yo ur sys tem .
Drivers Installation SY -P4X400 DRAG ON Lit e 82 Step 2. Insta ll Driver s and U tilitie s The followin g drivers need to be ins talled in order for the system to operate properl y 1. VIA 4 in 1 driver . 2. C-Media 8738 audio dri ver . – On ly requi red if you are usi ng the onboard audio.
Drivers Installation SY -P4X400 DRAG ON Lit e 83 Support Driver and VIA PCI IRQ Minipo rt Driver . For W indows NT users , the VIA IDE B us Masterin g driver is th e only dri ver to be insta lled i n your system.
Drivers Installation SY -P4X400 DRAG ON Lit e 84 possible to set alarms wh en current sy stem values exceed or fall below pre-set val ues. VIA USB2.0 Driver for Win 98/98SE/ME/2000/ XP This s etup p rog ram will in stall th e drive r for V IA USB 2.
Drivers Installation SY -P4X400 DRAG ON Lit e 85 After W indows XP installati on, your de vice manager should lo ok like t his:.
Drivers Installation SY -P4X400 DRAG ON Lit e 86 Afte r driver i nstal lation, your W indows XP device manager shoul d look like this:.
Drivers Installation SY -P4X400 DRAG ON Lit e 87.
Drivers Installation SY -P4X400 DRAG ON Lit e 88 Drivers direc tory list i n the CD driver Audio Dr iver VIA 4 in 1 Hardware mo nitor LAN driver USB2.0 driver.
Real tek La n Driv er Inst alla tion SY -P4X400 DRAGON Li te 89 Chapter 5 Audio Driver Installat ion A udio Driv er Installation for Windo ws 98/98se Afte r you have i nstalle d the audi o driver , windows may prompt you t o restart y our computer .
Real tek La n Driv er Inst alla tion SY -P4X400 DRAGON Li te 90 Chapter 6 Realtek LAN Driver In stallation Inst all the R ealtek LAN D riv ers under windo ws NT4.0 1. Double cl ick the Netw ork icon i n the control panel. The Net work propert ies windows wi ll appear .
91 APPEND IX A Troub lesho oti ng at Fir st St art Boot-up Issues The system do not pow er -up, no be epin g sound heard and the CPU fan does not turn on. 1. Check if the power cord is plug to the pow er source. 2. Check if the pow er is connected to the M/B.
92 more info on h ow to clear the CMO S). 2. Check all the jumper settings on th e M/B. ( if th e M /B have any). 3. Check the memo ry module and th e VGA card if inserted properly on the M/B. 4. If ye s, change the memory mo dule, it might be def ective .
93 2. Re-fl ash BIOS. Check on how t o flash BIOS on t he lat er part of this book. 3. Change th e CMOS batt ery , the battery mi ght be dr ained. 4. The BIOS chip might be f ailing. S tabilit y Issue My system intermittently locks up, very unstable 1.
94 2. CPU might be def ecti ve. BIOS Issue Wher e can I find the BIOS r e vi sion of my mainboard? It will be displayed on the up-left corner on the screen during boot -up.
95 1. Make sur e that you ha ve inst alle d the VIA 4 in 1 drive r . 2. Install/ re-install the VGA driver . After w ake-up from Sus pend to RAM or S tandby m ode, the screen has no display but I can hear the hard disk operat in g 1. Install VIA 4 in 1 driver .
96 This is because th e 3-wire audio cab le from the CD-ROM to the on-board CDIN1 connec tor i n the M/ B is not connect ed. See manual f or loc ation of CDIN1.
97 LAN Issues During LAN driver installation, the system hangs on 75%, w hy? Enable the onbo ard LAN in th e BIOS setup. For updated F AQs, please check http://www .
98 APPEND IX B How to cont act us: If yo u are inter ested in our pr oducts, please co ntact the SOYO sales department in the reg ion you li ve. If you requ ire T echnica l Assistance, pl ease contact our T echni cal Suppor t in the re gion you li ve.
Ein wichtiger Punkt beim Kauf des Geräts SOYO P4X400 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SOYO P4X400 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SOYO P4X400 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SOYO P4X400 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SOYO P4X400 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SOYO P4X400 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SOYO P4X400 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SOYO P4X400. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SOYO P4X400 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
