Benutzeranleitung / Produktwartung CPS2000 des Produzenten SoundCraft
Zur Seite of 52
SOUNDCRAFT CPS2000 Console Power Supply User and Tech nical Manual IMPORTANT: please read this manual carefully before connecting your Soundcraft console pow er supply to the mains for the first time. For your own safety and to avoid invalidation of the warranty all te xt marked with these Warning S ymbols should be read carefully.
© Harman International Industries Ltd. 1997, 200 5 All rights reserved Part s of th e desi gn of this prod uct may be prot ecte d by worl d-wid e pa tents . Part No. ZM01 98-0 5 Soundcraft is a trading divisio n of Harman I nternational Industr ies Ltd.
Contents Introduction 1 Mains Voltage Selection 2 Operat ing Voltag e Range 4 Replacing Mains Fuse 4 Warranty 5 Recommendations for Installation 7 PSU Linking 10 Dimen sions 11 Technical Specificati o.
ii.
Introduction Introduction 1.
IMPORTANT SAFETY INSTRUCTIONS · Read these in structions. · Keep these instructions. · Heed all warnings. · Follow all instructions. · Do not use this apparatus near water. · Clea n only w ith a dry cl oth. · Do not block any ventilation openings.
Introd uction WARNING: THIS APPARATUS MUST BE EARTHED The CPS2000 is a linear power su pply which, like other linear supplies, produces DC voltages by rectifying, smoothing and regula ting AC voltages from the se condary wind ings of a mains t ransforme r.
200V 230V 100V 115V Mains Voltage Selector Positions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR AVIS: RISQUE DE CHOC .
OPERATING VOLTAGE RANGE It is very important to use th e correct mains voltag e selection. A wide operating range of mains voltages is provided to enable the unit to func tion down to only 85Vrms on the mains supply.
1 Soundcraft is a trading division of Harman Interna tional Industries Ltd. End User mean s the person who first puts the equipment into regular operation.
Recommendations for Installation of the CPS 2000 Instal lation 7.
Recommendations for Installation The CPS2 000 power su pply is pro vided w ith f ront pa nel fi xing ho les for 19" rack-mounting and will occupy 4U of rack space. Rear support should be provided when fitted in a 1 9" rack. The CPS2000 is a heavy unit (30k g,) and should be regarde d as a two- man lift .
Finally, some consideratio n should be given to the ea rthing arrangement of the system at the ce ntre of which are the conso le and the CPS2000 (and any ot her Soun dcra ft power supply units). The con sole ch assis is eart hed, thro ugh the mains earth, via the power supply.
PSU Linking Link the second PSU to th e first a s shown in the following diagram. Note that the linking cable is included when a spare CPS2000 is ordered.
Dimensions All dimensions in millimeters Instal lation 11.
12 Installa tion.
Technical Specification Technical Specificati on 13.
Technical Specification MAINS INPUT VOLTAGE RANGE: 230 /200/1 15/10 0 V A C + 10% / -15% @ 5 0/60H z RATED INPUT P OWER (Max): 980 WAT TS MAINS F USE RATING : Use T10A L/25 0V (slo w-blow) . OUTP UTS DC. VOLTAGE RAIL MAX. OUTPUT CURRENT +17V 16 .00 AMPS -17V 16 .
Circuit Description CAUTION:THE FOLLOWING SECTIO NS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM AN Y SERVICING, OTHER THAN THAT CONTAINED IN PREVIOUS SECTIONS, UNLESS YOU ARE QUALIFIED TO DO SO.
Circuit Description INTRODUCTION. The CPS2 000 power suppl y prov ides +/ -17V at 16 Amps, +8V at 1 .25 Am p, and + 48V at 0. 3 Amp . The main PCB (SC3 804) is in LH and RH halves . The LH PC B carrie s the +17V and +48V supplies. T he RH PCB carries the -17V and +8V supplies.
The 723 IC is powered through R11, which allows ripple filtering by C9, a nd voltage prote ction by DZ 1,2. T hese Zeners ar e no t req uired to redu ce ripp le; th eir fu nction is purely pr otectiv e, prev enting the 40V Vmax sp ec of the 723 being ex ceeded should the mains voltage rise above nominal.
When shutdown has ocurred, the supply is reset by turning the main s briefly off and on. R100 discharges C25 so that the circ uit is ready for use at the n ext switch-on.
Undervoltage warning. The supply gives a warning indication when the mains voltage has fallen so low that regulation is about to be lost. T he Headroom Indica tor subsystem illuminate s all the decimal points o n the DPM, giving a clear sig nal that something is amiss.
The +48V Supply. Max cu rren t rating is 0.3 A mps. Th e +48 V phantom supply is based on the high-voltage regulator T L783C. (REG1) The AC input is fused by F4 a nd fullwave rectif ied by BR4; C1 ,24 are t he reservoi r capaci tors. Th e unregu lated D C may rise as high as +8 5V on hi gh mains.
Setting Setting Voltage Spec’d Measured EURO PE 230/1 15 230 195 1 86 EURO PE 200/1 00 200 170 1 64 USA/J APN 230/1 15 115 98 95 USA/J APN 200/1 00 100 85 85 Note that the dropout voltages in the rightmost c olumn were measured on a CPS2000, and are significantly lower than the guarantee d dropout specific ation of -15%.
FAULTFINDING NOTES. SAFETY: These sa fety notes are directed to those testing and repairin g this power supply. Legal requirements mean that we must not encourage untrained per sonnel to take the lid off.
THIS IS DANGEROUS. The danger lies n ot in the voltage, but in the enormous cu rrents that will flow if the capacitor terminals are shorted. A small screwdriver will simply disappear in a violent explosion. The m ain bodily danger is from metal wa tchstraps, et c.
24 Circuit Description.
Parts List Parts List 25.
Spare Parts Notes: 1) The ‘Module/PCB Assemblies’ section is indented to show those items which are part of another, higher level, item. 2) Some of the descriptions are preceded by one of the following 3 symbols: # - STATIC SENSITIVE. Anti-static precautions must be taken whilst handling this part.
MAIN ASSEMBLIES ! CPS2000 WIRED TESTED PSU CHAS RY8009 Ident . . . . . . . . . . . . . . . . . . . . . . . . . . Description . . . . . . . . . . . . . . . . . Part Number —- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80MM F AN FIL TER ASSY .
CPS2000 RH MODULE ASSY RS5975 Ident . . . . . . . . . . . . . . . . . . . . . . . . . . Description . . . . . . . . . . . . . . . . . Part Number —- . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2WY MTHD .1" FML . . . . . . . . . FF0585 —- .
PCBS CPS2000 FAN CONTROL PCB ASSY RA4032 Ident . . . . . . . . . . . . . . . . . . . . . . . . . . Description . . . . . . . . . . . . . . . . . Part Number —- . . . . . . . . . . . . . . . . . . . . . . . . . . . . CPS2000 HEA TSINK BRACKET . . . .
C4 . . . . . . . . . . . . . . . . . . . . . . . . . . CAP ELEC VERT 47UF 25V TPD SKP . . . . CE0401 C5 . . . . . . . . . . . . . . . . . . . . . . . . . . CAP ELEC VERT 2.2UF 50V TPD SS . . . . . CE0416 C6 . . . . . . . . . . . . . . . . . . . . . . .
D23 . . . . . . . . . . . . . . . . . . . . . . . . . . DIODE 1N4001 . . . . . . . . . . . BA0005 D24 . . . . . . . . . . . . . . . . . . . . . . . . . . DIODE 1N4001 . . . . . . . . . . . BA0005 D25 . . . . . . . . . . . . . . . . . . . . . . . . . .
R11 . . . . . . . . . . . . . . . . . . . . . . . . . . CF RES 1/2W 5% 330R . . . . . . . . . AF0537 R12 . . . . . . . . . . . . . . . . . . . . . . . . . . MF 0.25W RES 1% 22K BL . . . . . . . AP1381 R13 . . . . . . . . . . . . . . . . . . . . . . . .
R71 . . . . . . . . . . . . . . . . . . . . . . . . . . MF 0.25W RES 1% 10K BL . . . . . . . AP1373 R72 . . . . . . . . . . . . . . . . . . . . . . . . . . MF 0.25W RES 1% 22K BL . . . . . . . AP1381 R73 . . . . . . . . . . . . . . . . . . . . . . . .
TR23 . . . . . . . . . . . . . . . . . . . . . . . . . NPN TRANS 2SC2240BL(T APED) . . . . . BD0302 TR24 . . . . . . . . . . . . . . . . . . . . . . . . . NPN TRANS 2SC2240BL(T APED) . . . . . BD0302 TR25 . . . . . . . . . . . . . . . . . . . . . . . .
Fan Control Fan Control 35.
CPS2000 Fan Control & PCB SC4032 Technical Descripti on The later models o f the CPS2000 are fitted with a fa n control servo system th at adapts th e fan speed to the power drawn.
CPS2000 Fa n Contro ller Circuit Diagram Fan Control 37.
38 Fan Control.
T echnical Drawings 39 T echnical Drawings Circuit Diagrams ED3804A Issue 9 ED3804B Issue 9 ED3804A Issue 10 ED3804B Issue 10 ED3817 Issue 4 PCB Layout s SC3804 Issue 9 SC3804 Issue 10 SC3817 Issue 4.
T echnical Drawings 40.
T echnical Drawings 41.
T echnical Drawings 42.
T echnical Drawings 43.
T echnical Drawings 44.
T echnical Drawings 45.
T echnical Drawings 46.
T echnical Drawings 47.
T echnical Drawings 48.
Ein wichtiger Punkt beim Kauf des Geräts SoundCraft CPS2000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SoundCraft CPS2000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SoundCraft CPS2000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SoundCraft CPS2000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SoundCraft CPS2000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SoundCraft CPS2000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SoundCraft CPS2000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SoundCraft CPS2000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SoundCraft CPS2000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
