Benutzeranleitung / Produktwartung ZS-X3CP des Produzenten Sony
Zur Seite of 28
3-239-034- 13 (1) ©2001 Sony Corporation Personal Audio System Operating Instructions ZS-X3CP.
2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Basic Operations 3 T able of contents Basic Operations Playing an audio CD or MP3 files .................. 4 Listening to the radio ...................................... 8 The CD Player Using the display .......................................... 10 Locating a specific point in a track .
4 Playing an audio CD or MP3 files Connect the supplied AC power adaptor (see page 18). 1 Press POWER to turn on the player. 2 Press Z PUSH down to open the CD compartment and place the CD on the CD compartment until it clicks into place. 3 Close the lid of the CD compartment.
Basic Operations 5 Display Playing time Track number To Do this adjust the volume Press VOLUME +*, – . stop playback Press x . pause playback Press u *. Press the button again to resume play after pause. go to the next track Push jog lever toward > .
6 Note Before playing a file, this player reads all file and folder information on the CD. Depending on the file structure, it may take more than a minute to read them. During this time, “ Reading ” is displayed. Tip You can use the buttons mentioned in the table on page 5 for additional operations in the same way as when playing an audio CD.
Basic Operations 7 CD-R CD-RW 3 2 1 2 4 5 3 6 7 8 4 9 5 0 6 1 Example of folder structure and playing order The playing order of the folders and files is as follows: MP3 file Notes • A folder that does not include an MP3 file is skipped.
8 Listening to the radio Connect the supplied AC power adaptor (see page 18). 1 Press POWER to turn on the player. 2 Press BAND • AUTO PRESET until the band you want appears in the display. 3 Push the jog lever toward TUNE + or TUNE – and hold it until the frequency digits begin to change in the display.
Basic Operations 9 Use these buttons for additional operations Tip If the FM broadcast is noisy, press MODE until “ Mono ” appears in the display and radio will play in monaural. To Press adjust the volume VOLUME +*, – turn on/off the radio POWER *VOLUME + has a tactile dot.
10 The CD Player Using the display You can check information about the CD using the display. DISPLAY.
11 The CD Player Locating a specific point in a track You can find a specific point in a track while playing a CD. To locate Do this a point while While playing, push the jog listening to lever toward > (forward) or the sound .
12 Playing tracks in random order (Shuffle Play) You can play tracks in random order. MODE 1 Press POWER to turn on the player. 2 Press x . “CD” appears in the display. 3 Press MODE until “SHUF” appears in the display. 4 Press u to start Shuffle Play.
13 The CD Player 4 Push the jog lever toward . or > then press ENTER for the tracks or files* you want to program in the order you want. *folders for Program Folder Play. 5 Press u to start Program Play. To cancel Program Play Stop playing first. Then press MODE until “PGM” disappears from the display.
14 Creating your own program (Program Play) (continued) Tips • You can play the same program again, since the program is saved until you open the CD compartment.
The Radio 15 The Radio Presetting radio stations You can store radio stations into the player ’ s memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. 1 Press POWER to turn on the player. 2 Press BAND • AUTO PRESET to select the band.
16 Playing preset radio stations Once you ’ ve preset the stations, use the jog lever to tune in your favorite stations. 1 Press POWER to turn on the player. 2 Press BAND • AUTO PRESET to select the band. 3 Push the jog lever toward PRESET j or PRESET J to tune in the stored station.
The Audio Emphasis 17 The Audio Emphasis Selecting the audio emphasis (MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Reinforcing the bass sound Press MEGA BASS to display “MEGA BASS On”. To return to normal sound, press the button again to display “MEGA BASS Off”.
18.
Setting Up 19 Enjoying various pattern options on the display Like a screen-saver on a PC, graphics can be displayed on you player. There are three different patterns. While the power is on, press DISPLAY for about 2 seconds. “Graphics On” appears in the display and one of the graphic patterns will appear.
20 • If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun.
21 T roubleshooting General The power is not on. • Connect the AC power adaptor to a wall outlet securely. • Make sure the batteries are inserted correctly. The power is not on, and “ Low Battery ” is displayed. • Replace all the batteries with new ones if they are weak.
22 Troubleshooting (continued) The CD does not play. • Make sure that the CD compartment is closed. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation.
23 Maintenance Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available blower. Cleaning the cabinet Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution.
24 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 3.2-ohm loads, both channels driven from 150 - 10,000 Hz; rated 1.8 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
25 THE USABLE NUMBER OF FOLDERS/FILES • Maximum folder number: 255 • Maximum file number: 255 SETTINGS FOR COMPRESSION SOFTWARE AND WRITING SOFTWARE • To compress a source for an MP3 file, we recommend setting the transfer bit rate of the compression software to “ 44.
26 Index A Audio emphasis 17 B Batteries for player 18 C CD player 4 Choosing power sources 18 Cleaning cabinet 23 lens 23 Connecting AC power adaptor 18 Creating your own program 13 D Display 10 E, F.
27.
Sony Corporation Printed in China For customers in the USA Please register this product on line at http://www.sony.com/productregistration . Proper registration will enable us to send you periodic mailings about new products, services and other important announcements.
Ein wichtiger Punkt beim Kauf des Geräts Sony ZS-X3CP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony ZS-X3CP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony ZS-X3CP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony ZS-X3CP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony ZS-X3CP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony ZS-X3CP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony ZS-X3CP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony ZS-X3CP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony ZS-X3CP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
