Benutzeranleitung / Produktwartung VPL-CX1 des Produzenten Sony
Zur Seite of 118
.............. ......... SER VICE MANU AL .............. ......... MODEL DEST . MODEL DEST . VPL-CS2 WORLD VPL-CX1 WORLD RM-PJM10 WORLD LCD D A T A PR OJECT OR.
W ARNING!! AN INSULA TED TRANSFORMER SHOULD BE USED DURING ANY SER VICE T O A V OID POSSIBLE SHOCK HAZARD, BE- CA USE OF LIVE CHASSIS. THE CHASSIS OF THIS RECEIVER IS DIRECTL Y CONNECTED T O THE A C POWER LINE.
1 VPL-CS2/CX1 Table of Contents 1. Operating Instructions Operating Instructions ............................................................................................ 1-1 Quick Reference Card ....................................................
2 VPL-CS2/CX1 4. Semiconductors 5. Exploded Views 5-1. Cover ........................................................................................................... 5-1 5-2. Chassis .................................................................
3 VPL-CS2/CX1 8. Diagrams 8-1. Frame Schematic Diagram .......................................................................... 8-2 8-2. Schematic Diagrams and Printed Wiring Boards ........................................ 8-4 Schematic Diagrams QA, NF .
.
1-1 VPL-CS2/CX1 Section 1 Operating Instructions Reprinted from the operating instructions Operating Instructions Mode d’emploi Manual de instrucciones © 2000 Sony Corporation 4-079-834- 11 (1) LCD.
1-2 VPL-CS2/CX1 GB 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. For the customers in the USA If you have any questions about this product, you may contact: Sony Electronics Inc.
1-3 VPL-CS2/CX1 GB 4 5 GB Table of Contents GB Overview Precautions ......................................... 6 Features ............... ................. .............. 7 Location and Function of Controls ... 9 Front/Left Side/Bottom ................
1-4 VPL-CS2/CX1 GB 6 Precautions B Overview Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further.
1-5 VPL-CS2/CX1 GB 8 Features .............. ........... ............. ............. .............. ..... • Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. • VGA, SVGA, XGA, and SXGA are registered trademarks of the International Business Machines Corporation, U.
1-6 VPL-CS2/CX1 GB 10 Location and Function of Controls qh qh qh qh RELEASE (adjuster adjustment) button For details, see “How to use the adjuster” on page 10. qj qj qj qj Connector panel For details, see “Connector Panel” on page 12. qk qk qk qk Security lock Connects to an optional security cable (Kensington’s).
1-7 VPL-CS2/CX1 GB 12 Location and Function of Controls 6 ENTER key Enters the settings of items in the menu system. 7 Arrow keys ( M M M M / m m m m / < < < < / , , , , ) Select the menu or to make various adjustments. 8 RESET key Resets the value of an item back to its factory preset value.
1-8 VPL-CS2/CX1 GB 14 Location and Function of Controls qa L CLICK ke y Functions as the left button on a mouse. qs MENU key qd INPUT key qf MUTING PIC key Cut off the picture.
1-9 VPL-CS2/CX1 GB 16 Connecting the Projector Connecting the Projector When making connections, be sure to do the following: . Turn off all equipment before making any connections. . Use the proper cables for each connection. . Insert the cable plugs properly; plugs that are not fully i nserted often generate noise.
1-10 VPL-CS2/CX1 GB 18 Connecting the Projector When you use a PS/2 mouse port To connect a Macintosh computer Use an ADP-20 signal adapt er (not supplied). In this case, how ever, you can not control the mouse of the computer by the Remote Commander.
1-11 VPL-CS2/CX1 GB 20 Selecting the Menu Language Selecting the Menu Language You can select one of seven languages for displaying the menu and other o n- screen displays. The factory setting is English. 1 Open the front cover, then plug the AC power cord into a wall outlet.
1-12 VPL-CS2/CX1 GB 22 Projecting Projecting 1 Open the front cover, plug the AC power cord into a wall outlet, then connect all equipment. The ON/STANDBY indicator lights in red and the projector goes into standby mode. 2 Press the I / 1 key. The ON/STANDBY indicator lights in green.
1-13 VPL-CS2/CX1 GB 24 Projecting To turn off the power 1 Press the I / 1 key. “POWER OFF? Please press I / 1 key again.” appears to confirm that you want to turn off the power. A message disappears if you press any key except the I / 1 key, or if you do not press any key for five seconds.
1-14 VPL-CS2/CX1 GB 26 Using the MENU ” Adjustments and S ettings Using the Menu Using the MENU The projector is equipped with an on-screen menu for making various adjustments and settings. You can change the menu language displayed in the on-screen menu.
1-15 VPL-CS2/CX1 GB 28 The INPUT SETTING Menu The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input sig nal. Items that cannot be adjusted depending on the input signal are not displayed in the menu. For details on the unadjustable items, see page 40.
1-16 VPL-CS2/CX1 GB 30 The SET SETTING Menu The SET SETTING Menu The SET SETTING menu is used for changing the settings of the projector. STATUS (on-screen display) Sets up the on-screen display.
1-17 VPL-CS2/CX1 GB 32 Maintenance 6 Turn the projector back over. 7 Connect the power cord and turn the projector to standby mode. 8 Press the following keys on the control panel in the following order for less than five seconds each: RESET, < , , , ENTER.
1-18 VPL-CS2/CX1 GB 34 Troubleshooting Sound Remote Commander On-screen display does not appear . • ST A TUS in the SET SETTING menu has been set to OF F. c Set ST A TUS in the SET SETTING menu to ON (see page 30). Color balance is incorrect. • Picture has not been adjusted properly .
1-19 VPL-CS2/CX1 GB 36 Notes on Installation B Other Notes on Installation Do not install the projector in the following situations. These inst allations may cause malfunction or damage to the projector. Poorly ventilated • Allow adequate air circulation to prevent internal heat bu ild-up.
1-20 VPL-CS2/CX1 GB 38 Specifications Electrical characteristics Color system NTSC 3.58 /PAL/SECAM/ NTSC 4.43 /PAL-M/PAL-N system, switched automatically/ manually Resolution VPL-CS2: 600 horizontal T.
1-21 VPL-CS2/CX1 GB 40 Specifications Input signals and adjustable/ setting items PICTURE CTRL menu z : Adjustable/can be set – : Not adjustable/cannot be set INPUT SETTING menu z : Adjustable/can b.
1-22 VPL-CS2/CX1 GB 42 Specifications Whan a signal other than the preset signals shown above is input, the picture may not appear properly. Warning on power connection Use a proper power cord for your local power supply. 1) Use an appropriate rating plug which is applied to local regulations.
1-23 VPL-CS2/CX1 S ony Corporation Printed in Japan.
1-24 VPL-CS2/CX1 4-079-835- 01 (1) / Connections / Connexions / Conexiones / Anschlüsse / Collegamenti A / Stereo audio connecting cable / Câble de connexion audio stéréo / Cable de conexión de a.
1-25 VPL-CS2/CX1 RESET MENU POWER INPUT APA POWER SAVING ON/STANDBY FAN/TEMP LAMP/COVER ENTER VOLUME 1 4 2 3 3 2 I / 1 PIC INPUT MUTING MENU ENTER VOLUME APA + – / Basic Operation / Op é ration de .
.
2-1 VPL-CS2/CX1 Section 2 Service Informations 2-1. Circuit Boar ds Location NF BA B C H GA GB QA.
2-2 VPL-CS2/CX1 2-2. Disassembl y and Extension Boards 2-2-1. Cover Remov al 2-2-2. Front P anel Assy and NF Board Remo val 2 Top cover CN001 CN815 CN820 3 Side cover 1 Six shafts 5 Lamp power 1 Screw ( + PS2 x 8) 4 Unhook the two snaps.
2-3 VPL-CS2/CX1 2-2-3. C Board Remo val 2-2-4. Optics Unit Assy Remov al . Remov e the C Board. (Refer to Section 2-2-3.) 1 Screw ( + B3 x 6) 2 Earth spring(CT) 3 C board CN403 CN405 CN801 CN804 CN818.
2-4 VPL-CS2/CX1 2-2-5. GA and GB Boards Remo val . Remov e the Optics unit assy . (Refer to Section 2-2-4.) 2-2-6. B, BA and QA Boar ds Remo v al . Remov e the Optics unit assy .
2-5 VPL-CS2/CX1 2-2-7. Lens Removal 2-2-8. Prism Block Assy and In-polarizer P anel Assy Remov al . Remov e the Optics unit assy . (Refer to section 2-2-4.) 1 Two screws ( + PSW4 x 8) 2 Lens 9 Screw ( + B2.5 x 6) 1 Two fan screws 2 Finger guard 3 Fan 4 Cushion (FAN) 5 Two screws ( + PS3 x 8) 7 Screw ( + B2.
2-6 VPL-CS2/CX1 2-2-9. Extension Boards and Flexib le Cables VPL-CS2 ONL Y VPL-CX1 ONL Y 24P (1-900-251-19) XFB (1-680-467-11) XB7 (1-680-386-11) 50P (1-900-251-17) XQ7 (1-680-384-11) XQ5 (1-680-383-1.
2-7 VPL-CS2/CX1 2-2-10. Extension Boards Connection BA board XB7 XQ7 XFB XFC Flexible Cable (24P) Flexible Cable (50P) Flexible Cable (24P) [VPL-CS2] Flexible Cable (32P) [VPL-CX1] XPS [VPL-CS2] XPX [.
.
3-1 VPL-CS2/CX1 Section 3 Electrical Adjustments 3-1. Preparations 3-1-1. Equipment Required . Oscilloscope T ektronix 2465 or equi valent (bandwidth: 350 MHz or more) . NTSC, P AL, SECAM component signal generator T ektr onix TG2000 + A VG1 (optional module) + AW V G 1 (optional module) or equiv alent .
3-2 VPL-CS2/CX1 3-3. Adjustment Item Initialize Data Menu Title Item Name Memory Name Set CH Memory Status W/B Memory Memory VIDEO S VIDEO INPUT-A Memory VIDEO VIDEO RGB RGB HIGH LOW HIGH LOW PICTURE CTRL CONTRAST 80 80 80 BRIGHT 50 50 50 COLOR 50 50 50 HUE 50 50 50 SHARP 50 50 50 D.
3-3 VPL-CS2/CX1 Device Name Memory Name Set Chroma Memory Reso Status Remarks Memory NT358,NT443 PAL,PALM/N YUV Memory Memory B&W60 SECAM,B&W50 RGB MTRX/ CONTRAST 49 47 47 BRIGHT 35 35 35 Fixe.
3-4 VPL-CS2/CX1 Device Menu Memory Name Item Name Set Chroma Memory Reso Status Remarks Memory NT358, NT443 PAL, PALM/N YUV Memory Memory VPL-CS2 VPL-CX1 B&W60 SECAM, B&W 50 P.
3-5 VPL-CS2/CX1 Device Menu Memory Name Item Name Set Chroma Memory Reso Status Remarks Memory NT358, NT443 PAL, PALM/N YUV Memory Memory B&W60 SECAM, B&W 50 TG/ NRG POS Non Adjustable NRG WID.
3-6 VPL-CS2/CX1 3-4. Service Kowhow 3-4-1. After Replacing the Prism Block 1. Perform Section “ 3-1-2, item 2) Polarizing Plate Adjustment. ” 2. Perform Section “ 3-2. V-COM Adjustment. ” 3. Perform Section “ 3-5. White Balance Adjustment on Servicing.
3-7 VPL-CS2/CX1 3-5. White Balance Adjustment on Servicing 3-5-1. Signal Level Adjustment 1. Input the 10 STEP signal to INPUT-A. 2. Warm up the unit at least 10 minutes. Enter the V- AMP/BRT adjustment mode from the Service mode as follows : Service Mode → MENU → DEV.
3-8 VPL-CS2/CX1 3-6. Memory Memory structure of VPL-CS2/CX1 series is based on the VPL-CS1 and it is composed of the following eight memory blocks. 1. Set memory 2. Status memory 3. Channel memory 4. Chroma memory 5. W/B memory 6. Reso memory 7. Gamma memory 8.
4-1 VPL-CS2/CX1 Section 4 Semiconductor s RD24M-T1B2 RD8.2M-T1B1 RD13ES-T1B2 RD20ES-T1B2 FCQ20A06 D10SC9M D1FL20U-T A D1FS4A-T A D AN202K-T -146 1 2 3 1 2 3 D AP202K-T146 HN1B01FU-TE85R 2SA1162-YG-TE8.
4-2 VPL-CS2/CX1 SEC1801C SEC1901C SEC2422C TF861S 1SS355TE-17 D2FS6-T A DTZ-TT11-5.1 RB501V -40TE-17 RD5.6SB-T1 RD9.1SB2-T1 UDZ-TE-17-3.9B 1 2 5 6 3 4 5 6 1 2 3 4 HN1D03FU M52758FP 1 18 36 19 CXA2123A.
5-1 VPL-CS2/CX1 Section 5 Exploded Views Cover 5-1. Cover • Items mar ked “ * ” are not stock ed since the y are seldom required for routine service. Some delay should be anticipated when order- ing these items. • Items with no par t number and no description are not stock ed be- cause they are seldom required f or routine ser vice.
5-2 VPL-CS2/CX1 Chassis 5-2. Chassis Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark 51 * A-1275-186-C QA COMPL 52 * A-1136-048-A BA COMPL 53 * 4-079-888-01 LEVER (S2),SWITCH 5.
5-3 VPL-CS2/CX1 Base 5-3. Base Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark 101 * A-1316-546-A GA COMPL 102-103 102 * A-1311-887-A GB MOUNT 103 ! 1-576-233-11 H.
5-4 VPL-CS2/CX1 Optics (1/2) 5-4. Optics (1/2) : 7-682-547-04 + B 3 x 6 B A A B B C C D D 192 155 154 155 153 160 156 153 154 159 158 156 153 154 155 157 161 151 164 162 161 169 168 170 175 185 176 179 191 178 177 180 181 182 183 189 172 165 173 166 167 174 190 187 186 184 191 171 188 195 194 193 196 152 161 163 Ref.
5-5 VPL-CS2/CX1 Optics (2/2) 5-5. Optics (2/2) 203 202 201 204 202 206 209 205 202 207 208 210 211 212 213 214 215 217 218 216 216 : 7-685-103-19 + P 2 x 5 : 7-682-648-09 + PS 3 x 8 : 7-627-554-38 + P 2 x 1.8 Ref.No. Part No. Description Remark Ref.No.
.
6-1 VPL-CS2/CX1 Section 6 Electrical Parts List Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark * A-1390-984-A NF MOUNT ************** <CAPACITOR> C071 1-113-985-11 TANTAL CHIP 10UF 20.
6-2 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 C324 1-163-037-11 CERAMIC CHIP 0.022UF 0.00% 50V C325 1-163-021-91 CERAMIC CHIP 0.01UF 10.00% 50V C326 1-109-982-11 CERAMIC CHIP 1UF 10.00% 10V C327 1-164-004-11 CERAMIC CHIP 0.
6-3 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R292 1-216-085-00 RES-CHIP 33K 5% 1/10W R293 1-216-295-11 SHORT 0 R294 1-216-049-11 RES-CHIP 1K 5% 1/10W R296 1-.
6-4 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 C503 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V C504 1-126-205-11 ELECT CHIP 47UF 20.00% 6.3V C505 1-107-826-11 CERAMIC CHIP 0.1UF 10.00% 16V C506 1-107-826-11 CERAMIC CHIP 0.
6-5 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 IC424 8-759-682-98 IC MB90098APF-G-118-BND-ER IC426 8-759-557-86 IC NC7SZ86P5X IC427 8-759-648- IC HD64F2633TE IC429 8-759-661-55 IC 24LC21AT/SN <COIL> L401 1-412-057-21 INDUCTOR 6.
6-6 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R508 1-216-809-11 RES-CHIP 100 5% 1/16W R509 1-216-833-11 RES-CHIP 10K 5% 1/16W R510 1-216-833-11 RES-CHIP 10K 5.
6-7 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 ************************************************************************************ * A-1275-186-C QA COMPL ************** <CAPACITOR> C101 1-124-779-00 ELECT CHIP 10UF 20.
6-8 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 FL103 1-239-899-21 FILTER,CHIP EMI FL104 1-239-899-21 FILTER,CHIP EMI FL105 1-239-899-21 FILTER,CHIP EMI <IC&.
6-9 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R186 1-216-097-11 RES-CHIP 100K 5% 1/10W R187 1-216-097-11 RES-CHIP 100K 5% 1/10W R189 1-216-295-11 SHORT 0 R192 1-216-073-00 RES-CHIP 10K 5% 1/10W R193 1-216-053-00 RES-CHIP 1.
6-10 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 IC605 8-759-696-20 IC FA5332M-TE1 IC671 8-759-388-23 IC TL431BCDR2 IC672 8-759-533-85 IC BA05FP-E2 IC673 8-759-.
6-11 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 ************************************************************************************ * A-1311-887-A GB MOUNT *************** <CAPACITOR> C701 1-115-339-11 CERAMIC CHIP 0.
6-12 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 C902 1-128-400-11 ELECT CHIP 47UF 20.00% 25V C903 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C904 1-117-681-11 ELECT CHIP 100UF 20.00% 16V C906 1-164-004-11 CERAMIC CHIP 0.
6-13 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 <IC> IC801 8-759-388-31 IC PQ20VZ1U IC802 8-759-460-81 IC BA12FP-E2 IC803 8-759-584-86 IC M52749FP-TP IC804 8-759-523-81 IC TC74VHC08FT(EL) IC806 8-759-645-13 IC ADV7123KST140 IC807 8-759-571-03 IC LM4041DIM3-1.
6-14 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R885 1-216-864-11 SHORT 0 R886 1-218-692-11 METAL CHIP 1K 0.5% 1/16W R887 1-216-809-11 RES-CHIP 100 5% 1/16W R8.
6-15 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R1099 1-216-864-11 SHORT 0 R1102 1-216-864-11 SHORT 0 R1106 1-216-864-11 SHORT 0 R1108 1-218-726-11 METAL CHIP 27K 0.
6-16 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 C892 1-164-156-11 CERAMIC CHIP 0.1UF 25V C893 1-164-004-11 CERAMIC CHIP 0.1UF 10.00% 25V C894 1-162-964-11 CERAMIC CHIP 0.001UF 10.00% 50V C895 1-128-400-11 ELECT CHIP 47UF 20.
6-17 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 FB809 1-414-950-21 FERRITE 0UH FB810 1-414-950-21 FERRITE 0UH FB811 1-414-234-22 INDUCTOR 0UH FB812 1-414-234-2.
6-18 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R850 1-216-809-11 RES-CHIP 100 5% 1/16W R852 1-216-864-11 SHORT 0 R853 1-218-686-11 METAL CHIP 560 0.5% 1/16W R854 1-216-827-11 RES-CHIP 3.3K 5% 1/16W R855 1-218-692-11 METAL CHIP 1K 0.
6-19 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 R1030 1-216-809-11 RES-CHIP 100 5% 1/16W R1031 1-216-809-11 RES-CHIP 100 5% 1/16W R1032 1-216-832-11 RES-CHIP 8.2K 5% 1/16W R1033 1-216-832-11 RES-CHIP 8.2K 5% 1/16W R1034 1-216-825-11 RES-CHIP 2.
6-20 Ref.No. Part No. Description Remark Ref.No. Part No. Description Remark VPL-CS2/CX1 ************************************************************************************ A-1375-195-A H COMPL ************ <CAPACITOR> C001 1-164-004-11 CERAMIC CHIP 0.
7-1 VPL-CS2/CX1 7-1 Overall Overall Section 7 Block Diagrams Overall Block VIDEO SW R-Y,Y,B-Y V-R,V-G,V-B IC404 A/D CONV. IC409 R,G,B CONV. D/A IC406 IC402 INV SW G SYNC SEPA.
7-2 VPL-CS2/CX1 7-2 NF, QA NF, QA NF Block QA Block A (VIDEO INPUT,MOUSE CONNECTOR,USB CONNECTOR,USB CONTROL) TO GA BOARD CN605 USB- 32 MOUSE CONTROLLER IC122 PB7 10 X101 24MHz VIDEO 4 1 3 2 CN106 AUDIO IN QA CN122 J102 C Y S J101 C BUFFER Q102 Q103 BUFFER Y S SEL S-Y S-C 1 2 CN101 C-V Q104 BUFFER CV SUB +5V 3.
7-3 VPL-CS2/CX1 7-3 BA BA B A Block Q271 BA CN201 B25 A25 B-Y I (COLOR DECODER,RGB DECODER,D COMB) R-Y A27 B27 Y A29 B29 A31 V-R B31 B33 A33 V-G A35 B35 V-B VIDEO Y C B23 A23 B21 A21 A19 B19 15K-CS PA.
7-4 VPL-CS2/CX1 7-4 B B B(MAIN CPU,A/D CONVERTER,SCAN CONVERTER,SDRAM,RGB INPUT,SYNC SEP) CN404 R-Y Y B-Y PAL V VIDEO SW IN2(R) 11 IC404 OUT(R) 35 R TP404 V-R V-G 13 V-B 16 IN2(G) IN2(B) 7 5 2 IN1(B) IN1(G) IN1(R) OUT(G) 30 OUT(B) 27 TP403 G TP402 B R G B SW 19 H.
7-5 VPL-CS2/CX1 7-5 B B B Block A-R A-G A-L SIRCS A35 B35 A34 B34 A33 B33 A31 B31 A29 B29 A28 B28 B27 A27 LAMP COVER FILTER COVER U-DA NR OFF U-CL NF OFF PWR PROT B26 A26 F-CL B25 A25 F-DA B23 A23 SCL.
7-6 VPL-CS2/CX1 7-6 C, H C, H B3 B5 A3 CN809 LAMP ON LAMP SENS POWER ON FAN CONT1 FAN PROT A4 B4 A5 FAN CONT2 IC804(1/4) 6 5 IC804(3/4) 10 8 9 1 FUSE TEMP CN802 2 L CONT OUT L CONT IN 3 1 CN803 SCI FL.
7-7 VPL-CS2/CX1 7-7 C Bloc k H Bloc k C, H C, H POS-CON2 IC818 SWITCH (SAME AS R PROCESS) RBDIR TP816 (B) CN816 2 23 4 3 8 SIG4 SIG3 SIG5 +15.5V 6 9 7 13 24 15 14 SIG6 XRGT SIG1 HST COM HCK2B HCK1B SI.
7-8 VPL-CS2/CX1 7-8 C, H C, H B3 B5 A3 CN809 LAMP ON LAMP SENS POWER ON FAN CONT1 FAN PROT A4 B4 A5 FAN CONT2 IC804(1/4) 6 5 IC804(3/4) 10 8 9 1 FUSE TEMP CN802 2 L CONT OUT L CONT IN 3 1 CN803 SCI FL.
7-9 VPL-CS2/CX1 7-9 C Bloc k H Bloc k C, H C, H IC818 SWITCH (B) CN817 3 15 5 4 30 VSIG1 VSIG2 VSIG3 +15.5V 7 10 8 16 17 31 VSIG5 VSIG6 RGT COM HST VSIG4 6 LCD PANEL VID6 Q810,813 VID1 VID5 VID4 VID3 .
7-10 VPL-CS2/CX1 7-10 GA, GB GA, GB GA Block GB Block A TO QA BOARD CN101 POWER SUPPLY,DC-DC CONVERTER, CN601 GA 3 1 AC INLET AC(N) AC(L) LFT L601 F601 1 43 2 D601 RECT POWER-FACTOR REGULATING CONTROL.
8-1 VPL-CS2/CX1 8-1 Section 8 Diagrams [Measuring conditions, voltage and wavef orm] . . . . . A voltage v alue is the reference v alue between the measurement point and the ear th, when the NTSC color bar signal is receiv ed from the color bar generator (digital multi-meter used: 10 M ohms/ V DC).
8-2 VPL-CS2/CX1 8-2 2 3 4 5 A BCD E FGH 1 Frame (1/2) Frame (1/2) 8-1. Frame Schematic Diagram 1 2 3 1 2 3 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 1 2 1 2 3 1 2 3 4 5 6 7 8 9 10 11 12 1 2.
8-3 VPL-CS2/CX1 8-3 2 3 4 5 1 A BCDE F GH Frame (2/2) Frame (2/2) 2 3 1 TXD RXD GND 5 6 8 7 TO C BOARD CN808 VIN FWR MD2 MD1 LAMP LED TEMP LED TEMP LED POWER LED POWER LED SCL SDA GND KEY1 GND SDA KEY.
8-4 VPL-CS2/CX1 8-4 NF, QA NF, QA 8-2. Schematic Diagrams and Printed Wiring Boards QA -A SIDE- SUFFIX: -14 QA -B SIDE- SUFFIX: -14 NF -A SIDE- SUFFIX: -12 NF -B SIDE- SUFFIX: -12 CN101 CN102 CN103 CN.
8-5 VPL-CS2/CX1 8-5 2 3 4 5 1 A BCDE F GH NF, QA (1/2) NF, QA (1/2) +5V +6V +5V +6V +16.5V +5V C RV-R GV-G BV-B Y VIDEO B-Y R-Y Y R L Y C VIDEO A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A.
8-6 VPL-CS2/CX1 8-6 2 3 4 5 A BCD E FGH 1 QA (2/2) QA (2/2) +3.3V +5V 1 2 3 4 1 2 3 4 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 1 2 3 4 5 6 7 8 9 10 .
8-7 VPL-CS2/CX1 8-7 BA BA BA -A SIDE- SUFFIX: -14 BA -B SIDE- SUFFIX: -14 CN201 C202 C221 C222 C224 C225 C226 C227 C228 C232 C233 C234 C235 C236 C237 C238 C240 C242 C243 C244 C246 C247 C276 C277 C278 .
8-8 VPL-CS2/CX1 8-8 2 3 4 5 A BCD E FGH 1 BA BA 0 +5V +5V +5V 123 0 0.4 0.4 0.4 0.4 4.6 4.7 2.4 3.9 4.0 5.0 5.0 0 2.0 2.6 0.6 +9V +5V +9V 2.0 2.6 0 0 0.
8-9 VPL-CS2/CX1 8-9 B B B -A SIDE- SUFFIX: -11 B -B SIDE- SUFFIX: -11 CN401 CN402 C401 C403 C404 C408 C409 C410 C412 C413 C414 C418 C419 C420 C421 C422 C423 C425 C426 C427 C428 C431 C435 C436 C438 C44.
8-10 VPL-CS2/CX1 8-10 2 3 4 5 A BCD E FGH 1 B (1/4) B (1/4) * R410 * R414 * R425 * R420 * R421 * R418 * R413 NOTE: * R410 R411 R413 R414 R417 R418 R420 R421 R425 REF.
8-11 VPL-CS2/CX1 8-11 2 3 4 5 1 A BCDE F GH B (2/4) B (2/4) +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V 6 3.2 3.2 3.2 3.2 3.2 3.2 3.2 1.6 3.2 5.0 3.1 0 5.
8-12 VPL-CS2/CX1 8-12 2 3 4 5 A BCD E FGH 1 B (3/4) B (3/4) +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V +3.3V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34.
8-13 VPL-CS2/CX1 8-13 2 3 4 5 1 A BCDE F GH B (4/4) B (4/4) 3.2 1.3 2.1 5.0 4.4 5.0 3.2 +3.3V +5V +3.3V +3.3V +5V +5V +3.3V 5.0 3.2 3.2 3.2 5.0 5.0 5.0 5.0 0 3.2 3.2 3.2 3.2 3.2 0 3.2 1.3 1.3 1.4 3.2 1.4 1.4 3.2 3.2 3.2 0 0 3.2 3.2 3.2 3.2 +3.3V 0 PD XSEL LEE GND S1 NC S0 GND OE REF CLK S2 GND GND S3 S4 VDD VDD X1 X2 (MAIN CPU) (4/4) B-SS1707<.
8-14 VPL-CS2/CX1 8-14 CC C -A SIDE- SUFFIX: -11 C -B SIDE- SUFFIX: -11 CN801 CN802 CN803 CN804 CN805 CN806 CN807 CN810 CN811 CN812 CN815 CN816 CN817 CN818 CN819 CN820 C1005 C1008 C1020 C1023 C1032 C10.
8-15 VPL-CS2/CX1 8-15 2 3 4 5 1 A BCDE F GH C (1/5) C (1/5) 1 2 3 4 5 +5V 1.6 1.9 2.6 2.6 2.6 11.9 3.5 3.4 4.4 3.0 3.5 4.5 3.7 3.9 3.9 0.5 +12V +5V +16.
8-16 VPL-CS2/CX1 8-16 2 3 4 5 A BCD E FGH 1 C (2/5) C (2/5) 5.0 5.0 5.0 +5V 1.6 3.7 3.7 0.4 4.6 +5V +5V +5V 5.0 2.2 2.9 2.2 2.9 2.2 2.9 2.3 2.9 2.3 2.9 2.3 2.9 2.0 2.5 0.5 4.4 0 3.8 0.4 4.1 0.1 3.8 0.4 2.5 2.0 3.1 0 0.1 0 3.7 3.6 3.6 3.8 3.2 0.5 3.6 3.
8-17 VPL-CS2/CX1 8-17 2 3 4 5 1 A BCDE F GH 0 +15.5V +5V +5V 6 7 5.0 4.9 2.4 2.4 2.4 0 2.4 0.6 1.7 2.4 4.9 2.4 1.7 0 0 3.1 4.0 3.5 2.3 4.4 1.7 5.0 0 2.1 2.1 4.9 4.4 3.7 3.7 3.4 3.4 3.4 3.4 0 2.1 2.1 4.1 4.1 5.0 4.4 5.0 6.9 6.9 6.9 6.9 6.9 6.9 6.2 3.5 7.
8-18 VPL-CS2/CX1 8-18 2 3 4 5 A BCD E FGH 1 C (4/5) C (4/5) 11 +15.5V +15.5V 8 10 9 4.4 3.7 3.4 4.4 3.7 4.9 3.4 3.4 3.4 0.4 2.1 2.1 4.1 4.1 5.0 5.0 6.9 6.9 6.9 6.9 6.9 6.9 6.3 3.1 7.0 1.3 6.9 2.4 2.5 6.9 6.9 2.5 3.3 4.4 3.7 3.4 4.4 3.7 4.9 3.4 3.4 3.4 0.
8-19 VPL-CS2/CX1 8-19 2 3 4 5 1 A BCDE F GH C (5/5) C (5/5) 0 12.9 12.9 12.7 0.5 0 0 2.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 0 1.7 6.0 0 0 0 0 0.
8-20 VPL-CS2/CX1 8-20 2 3 4 5 A BCD E FGH 1 CXA1846BN (IC825) 20 19 18 17 16 15 14 13 12 11 1 2 3 4 5 6 7 8 9 10 1dB STEP VOLUME 8dB STEP VOLUME 1dB STEP VOLUME 8dB STEP VOLUME VCT BUFFER LATCH SHIFT REGISTER LATCH CONTROL ZC DET + – + – INP 1 INN 1 VCT 1 INAO 1 VRIN 1 OUT 1 N.
8-21 VPL-CS2/CX1 8-21 2 3 4 5 1 A BCDE F GH C (1/5) C (1/5) +5V +12V +5V +16.5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 G I.
8-22 VPL-CS2/CX1 8-22 2 3 4 5 A BCD E FGH 1 C (2/5) C (2/5) +5V +5V +5V +5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 .
8-23 VPL-CS2/CX1 8-23 2 3 4 5 1 A BCDE F GH C (3/5) C (3/5) +5V +5V +5V +5V +15.5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 .
8-24 VPL-CS2/CX1 8-24 2 3 4 5 A BCD E FGH 1 C (4/5) C (4/5) +15.5V +5V +5V +15.5V 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 4.
8-25 VPL-CS2/CX1 8-25 2 3 4 5 1 A BCDE F GH C (5/5) C (5/5) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 1 2 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 L813 L812 IC823 IC824 IC825 JL882 JL883 JL884 JL8.
8-26 VPL-CS2/CX1 8-26 2 3 4 5 A BCD E FGH 1 HH 4.9 0.1 1 2 3 4 5 6 7 8 9 10 11 12 C001 R001 R002 R003 R004 R005 R006 R007 R008 R009 R010 R011 R012 R013 R014 R015 R016 S002 S003 S004 S005 S006 S007 S00.
8-27 VPL-CS2/CX1 8-27 GA GA GA -A SIDE- SUFFIX: -11 GA -B SIDE- SUFFIX: -11 CN601 CN602 CN605 CN606 CN607 CN608 CN674 CN675 CN676 C601 C602 C603 C604 C606 C608 C609 C610 C611 C612 C616 C617 C619 C620 .
8-28 VPL-CS2/CX1 8-28 2 3 4 5 A BCD E FGH 1 GA GA . Ref er to page 8-27 for Printed Wir ing Board +18V +5V +18V +6V 1 2 4 3 1 2 4 3 2 3 4 5 6 7 8 9 10 11 12 1 2 4 3 1 2 3 4 5 6 7 8 9 1 2 3 4 1 1 2 3 1.
8-29 VPL-CS2/CX1 8-29 2 3 4 5 1 A BCDE F GH GB GB 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 IO G L703 R707 R706 L707 R784 R775 R785 CN706 CN702 D727 D728 R787 R788 R789 D715 C740 C742 C702 C701 R708 C776 C777 L702 C769 D736 CN707 R776 C773 R777 C772 Q710 C778 IC701 150µH 15k :RN-CP 1.
.
SAFETY CHECK-OUT After correcting the original service problem, perform the following safety checks before releasing the set to the customer : Check the metal trim, “metallized” knobs, screws , and all other e xposed metal par ts for A C leakage. Chec k leakage as described below .
Sony Corporation Communication System Solutions Network Company 9-929-686-01 English 00IZ26-1 Printed in Japan ©2000.9.
Ein wichtiger Punkt beim Kauf des Geräts Sony VPL-CX1 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony VPL-CX1 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony VPL-CX1 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony VPL-CX1 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony VPL-CX1 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony VPL-CX1 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony VPL-CX1 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony VPL-CX1. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony VPL-CX1 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
