Benutzeranleitung / Produktwartung SLV-XA37ME des Produzenten Sony
Zur Seite of 24
Video Cassette Player ©1997 by Son y Corporation Operating Instructions 3-860-804- 23 (1) SL V -XA17ME/SG SL V -XA37ME/SG P AL NTSC 4.43.
Introduction 2 WARNING T o pr event fire or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
Introduction 3 T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 6 Step 3: Connecting the unit 8 Step 4: T uning your TV to the unit Bas.
Getting Started 4 Getting Started Step 1 Unpacking Check that you have received the following items with the unit: • Aerial cable • Plug adaptor (SL V -XA17ME/XA37ME only) • Remote commander • R6 (Size AA) batteries Checking your model name The instructions in this manual ar e for the 4 models: SL V -XA17ME, XA17SG, XA37ME, and XA37SG.
Getting Started 5 Getting Started Notes • W ith normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, r emove the batteries to avoid possible damage from battery leakage.
Getting Started 6 Step 3 Connecting the unit to mains 1 Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the unit. 2 Connect AERIAL OUT of the unit and the aerial input of your TV using the supplied aerial cable.
Getting Started 7 Getting Started Additional connections T o a TV that has phono type audio/video input jacks This additional connection improves pictur e and sound quality . Connect the TV as shown on the right. If you want to use the T rinitron TV Synchro Play function (see page 12), this connection is necessary .
Getting Started 8 1 Press ON/ST ANDBY to turn on the unit. 2 T urn on your TV and select a programme position for video playback. Choose a channel between UHF 30 and 39 on the TV where ther e is no picture and no sound or only a steady rustling sound.
Getting Started 9 Getting Started T o obtain a clear playback picture If the playback picture does not appear clearly in step 5 above, turn the RF CHANNEL screw on the rear panel of the unit with a screwdriver to a position wher e the TV clearly displays the playback picture.
Basic Operations 10 Basic Operations Playing a tape NTSC PB COLOR SYSTEM 6 EJECT P P AUSE 3/# SEARCH ) FF · PLA Y 0 REW p STOP 1 T urn on your TV and set it to the video channel. 2 Insert a tape. (SL V -XA17ME/SG) The unit turns on, and starts playing automatically .
Basic Operations 11 Basic Operations To Stop play Pause play Resume play after pause Search forward Search backward Fast-forward the tape Rewind the tape Eject the tape Press p STOP P P AUSE P P AUSE .
Basic Operations 12 Playing a tape (continued) Tip • Y ou can play back tapes recor ded in the SP , LP , and EP mode. Notes • Depending on your TV , the following may occur while playing an NTSC-r.
Additional Operations 13 Additional Operations Playing/sear ching at various speeds ) # FF 0 3 REW · PLAY 7 FRAME 3 / # SEARCH ) FF · PLAY 0 REW Playback options Fast-forward/r ewind V iew the pictu.
Additional Operations 14 T o resume normal playback Press · PLA Y . Tip • If the picture shakes while in the still mode, adjust the pictur e using $ / 4 TRACKING NORMAL/SLOW STILL ADJUST . Notes • Streaks or snow cannot be eliminated completely in the various playback operations, especially in the slow motion mode.
Additional Operations 15 Adjusting the pictur e Adjusting the tracking Although the unit automatically adjusts the tracking when playing a tape, distortion may occur if the tape was recor ded in poor condition. If so, manually adjust the tracking. Press $ / 4 TRACKING NORMAL/SLOW to obtain the best possible picture.
Additional Operations 16 Editing with another VCR How to connect to recor d on this unit (SL V -XA37ME/ SG only) TV Other VCR (Player) Tip • Use a commer cially available 2-phono to 2-phono type audio/video cable. If the other VCR has the AUDIO L and R jacks, use a commercially available 3-phono to 2-phono type audio/video cable.
Additional Operations 17 r REC P PAUSE Operation (when recor ding on this unit) (SL V -XA37ME/SG only) Y ou can make a copy of a tape using this unit for recor ding or playback. The unit cannot recor d TV programmes dir ectly since it does not have a TV tuner .
Additional Information 18 Symptom The ON/ST ANDBY switch does not function. The power is turned on but the unit does not operate. The unit enters standby mode or turns off automatically . The playback picture does not appear on the TV screen. The picture is not clear .
19 Additional Information Symptom No tape can be inserted. The remote commander does not function. The unit needs to be cleaned. Remedy • Check that a tape isn’t alr eady in the tape compartment. • Make sur e you are pointing the r emote commander at the remote sensor on the unit.
Additional Information 20 System RF output signal UHF channels 30 to 39 Aerial out 75-ohm asymmetrical aerial socket Inputs and outputs LINE IN (SL V -XA37ME/SG only) VIDEO IN, phono jack (1) Input si.
21 Additional Information Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel (SL V -XA17ME/SG) Front panel (SL V -XA37ME/SG) 1 ON/ST ANDBY switch/ind.
Additional Information 22 Index to parts and controls (continued) Rear panel (SL V -XA17ME/SG) 1 Mains lead (6) 2 RF CHANNEL screw (9) 3 AERIAL OUT connector (6) 4 LINE IN AUDIO/VIDEO jacks (SL V -XA3.
23 Additional Information Remote commander 1 6 EJECT button (1 1) 2 TV control buttons ( Only for TV ) (5) TV/VIDEO ; (TV power) u (on/standby) VOL +/– PROG (CH) +/– 3 EFFECT button ( This button doesn’ t work with this unit. ) 4 TRACKING AUTO/MANU button (15) 5 TV/VTR button ( This button doesn’ t work with this unit.
Additional Information 24 Index A, B Accessories supplied 4 Adjusting picture 15 tracking 15 Aerial hookup 6 Auto head cleaner 17 A V connection 7 C Cleaning the video heads 18 Colour system compatible colour systems 2 setting 1 1 Connecting the unit and your TV 6 to a TV with audio/ video jacks 7 D Dubbing.
Ein wichtiger Punkt beim Kauf des Geräts Sony SLV-XA37ME (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony SLV-XA37ME noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony SLV-XA37ME - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony SLV-XA37ME reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony SLV-XA37ME erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony SLV-XA37ME besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony SLV-XA37ME verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony SLV-XA37ME. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony SLV-XA37ME gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
