Benutzeranleitung / Produktwartung SLV-SE810K des Produzenten Sony
Zur Seite of 100
3-065-678- 11 (1) GB Video Cassette Recor der Oper ating Instructions SL V -SE610N/K SL V -SE710N/K SL V -SX710N/K SL V -SE810N/K © 2001 Sony Cor poration PA L.
2 W ARNING W ARNING T o pre v ent f ire o r shoc k hazard , do no t exp os e the unit to rain or moisture. T o avoid elec trica l shock , do not open th e cabine t. Refer servicing to qualif ied personnel only . Mains lead must only be changed at a qualif ied service shop.
3 T able of contents Getting Started T able o f co ntents Getting Started 4 Inde x to part s and contr ols 10 Step 1 : Un pac kin g 11 Step 2 : Se tting up th e remote comma nder 15 Step 3 : Con necti.
4 Inde x to par t s and controls Getting Started Inde x to pa r ts and contr ols Refer to the pages indicated in pare nt hes es ( ) for details. Fr ont panel SL V -SE 810N/ K A ? / 1 (on/s tandby) swi.
Getting Started 5 Inde x to par ts and controls SL V -S E610N/K, SE 710N/K, SX 710N/K A ? / 1 (on/s tandb y) swit ch (19) B T ape comp artment C Rem ote s e nsor ( 11) D A (eject) b utton ( 44) E H (p.
6 Inde x to par t s and controls Displa y windo w A T imer indi cator (52) (5 7) (60) B SYNCHR O indicator* 1 (67) C STEREO ind icator (70) D NICAM indi cator* 2 (70) E (smartlink) indicator* 1 (17) F.
Getting Started 7 Inde x to par ts and controls Rear panel A Mains lead (1 5) (16) B DECODER/ t LINE-2 IN DECODEUR/ t EN TRE E LIG N E- 2 connector* 1 ( 18) (39) (6 6) (88) DECODER/ t LINE-3 IN DECODE.
8 Inde x to par t s and controls Remote commander A Z EJECT b utton (44 ) B WIDE b ut t on ( for TV ) (13) C A UDI O MO NIT OR b utt on (70 ) D ×2 bu tton* (63 ) E y SLO W b utton* (63) F SP (Stand a.
Getting Started 9 Inde x to par ts and controls M [TV] / [VIDEO] remote control s witch (11) N ? / 1 (on/ standb y) swit ch (12) (57 ) O COUNTER/REMAIN button (47) / (T eletex t) button* 2 ( fo r TV ) (13) P a TV po wer on/TV mode select button* 2 ( for TV ) (12) Q .
10 Unpacking Step 1 : Unpac king Check that you ha v e recei ved the follo wing items with the VCR: • Remote commander • Aerial cable • R6 (size AA) batteries Check y our model na m e The instructions in this manu a l are for the 8 models : SL V -SE610N, SE610K, SE710N, S E710K, SX71 0N, SX710K , SE810N, an d SE810K.
Getting Started 11 Setting up the remot e commander Step 2 : Setting up the remote commander Inserting the batt eries Insert two R6 (size AA) batteries by matc hing the + and – on the batteries to t he diagram ins ide the battery com partment.
12 Setting up the remot e commander TV contr ol b utt ons To Press Set th e TV to standb y mod e ? / 1 Select an input source: aerial i n or line in t TV/VIDEO Select th e TV’ s programm e positio n.
Getting Started 13 Setting up the remot e commander Notes • W ith normal use, t he batte ries sho uld last a bout t hree to s ix mon ths. • If you do not use the remote commander for an extended period of time, remov e the batt eries to avoid possible da mage from ba ttery leaka ge.
14 Setting up the remot e commander Code numbers of contr ollable TVs If more than one code number is listed, try entering them one at a time unti l you f ind the o ne that wo rks with your TV . T o switch to wide m ode, s ee the foo tnotes b elo w this table f or the ap plicable code numbers .
Getting Started 15 Connecting the VCR Step 3 : Connectin g the VCR If your TV has a Scart (EUR O-A V) connect or , see p age 16. If y our TV does not have a Scart (EURO-A V) connector Note • Whe n you conne ct the VCR and your TV on ly with an ae rial cabl e, you have to tune yo ur TV to th e VC R (see page 19 ).
16 Connecting the VCR If y our TV has a Scar t (EUR O-A V) connector Note • If the TV is conn ected to the LINE-1 (TV) co nne ctor , setting t he RF channel to OFF is recomme nded. In the OFF po si tio n, only the sign al from the aerial is output through the AE R IAL OUT conn ect or (see pag e 21).
Getting Started 17 Connecting the VCR About t he SMAR TLI NK f eat ures ( no t a va ilab le on SL V -SE 610N/K ) If the connected TV complies with SMAR TLINK, MEGALOGIC* 1 , EASYLINK* 2 , Q-Link* 3 , .
18 Connecting the VCR Additi onal connections T o a stereo system (not a va ilable on SL V -SE610 N/K) Y ou ca n impr ove sound quality by connecting a stereo system to the R/D L/G jacks as s ho wn on the right.
Getting Started 19 T uning your TV to the V CR Step 4 : T un i ng y our TV to the VCR If your TV has a Scart (EUR O-A V) connect or , see p age 21. If y our TV does not have a Scart (EURO-A V) connector Follo w the steps below so that your TV will properly recei ve the video signal s from you r VCR.
20 T uning y our TV to the VCR T o check to see if the TV tuning is corre ct Set the TV to the video chan nel and press PR OGRAM +/– on the VCR. If the TV screen chan ges to a dif ferent progr amme each time you pr ess PR OGRAM +/–, the TV tuning is cor rect.
Getting Started 21 T uning your TV to the V CR If y our TV has a Scar t (EUR O-A V) connector 1 Press ? / 1 (on/standb y) to t urn on the VC R. 2 Press RF CHANNEL on the VCR lightly . The factor y-preset RF channel app ears in the display windo w . The VCR signal is output throug h this ch annel to the TV .
22 Setting up the VCR wi th the Aut o Set Up function Step 5 : S etting up th e VCR with th e A uto Set Up fu ncti on Before using the VCR for the f irst time, set up the VCR u sin g the Auto Set Up function.
Getting Started 23 Setting up the VCR with the Auto Set Up function The abbre viations of the c ountri es and langua ges are a s f ollows: T o c ancel the A u to Set Up function Pre ss A UT O SE T UP . Tip • If y ou want to cha nge the l anguage for the on-screen displa y from the o ne preset i n the Auto Set Up fun ction, see page 29 .
24 Setting up the VCR wi th the Aut o Set Up function Notes • If yo u stop the Aut o Set Up fun ction dur i ng step 3, you must rep eat set up from step 1. • Whene v er you operate the Auto Set Up function , some of th e settings (Sho wV iew* , timer , etc.
Getting Started 25 Setting the cloc k Step 6 : Setting the c loc k Y ou must set the time and date on the VCR to use the timer features properly . The Auto C lock Set functio n (not av ailable on SL V -SE610N/K) works only if a station in your area i s broadcast ing a time sign al.
26 Setting the cloc k Tips • T o chang e the digits while set ting, press < to return to the item to be c hanged, and select the d igits by pressing M / m . • If you wa nt to re turn to the pr ev ious menu, h ighlight RE TURN and press OK. Note • The menu disappe a rs automati cally if you don’ t proceed for more than a fe w minutes.
Getting Started 27 Setting the cloc k Changing the st ation f or the A uto Cl ock Set funct ion (not a v ailab le on SL V -SE610N/K) Before y ou star t … • T urn on the VCR and the TV . • Set th e TV to the vide o chann e l . • Refer to “Inde x to parts a nd contro ls” for b utton locations.
28 Setting the cloc k Tips • If you set A UTO ADJUST to ON, the Au to Clock Set function i s acti vate d whenever t he VCR is turned off. The time is adjusted automat ically by making reference to the tim e signal from the station whose program m e positio n is displaye d in the “CLO C K P R OGRAM” row .
Getting Started 29 Selecting a language Sele cting a la nguag e Tip • If you w ant to ret urn to the pre vio us menu, h ighlight RET URN and press OK.
30 Presetting channels Presetting c hanne ls If some chan nels could not be preset u sing the Au to Set Up funct ion, you can preset them manu ally . Before y ou star t … • T urn on the VCR and the TV . • Set the TV to th e video c hannel. • Refer to “Inde x to pa rts and cont rols” for b utton locatio ns.
Getting Started 31 Presetting channels 5 Press PR OG +/– to select the progr amme posit ion. 6 Press M / m to highlight CHANNEL SET , then pr ess OK.
32 Presetting channels 7 Press M / m repeatedly until th e channel y ou want is disp layed. The channels app ear in the follo wing orde r: If you k no w the number of the channel y ou want, press the programme number b utton s. Fo r e xample, for cha nnel 5, f ir st press “0” and then press “5.
Getting Started 33 Presetting channels If the p icture is not c lear Normally , the Auto Fi ne T uning (AFT) function automatically tunes in channels clearly . Ho we ver , if the picture is not clear , you may also use the manual tuning funct i on. Tip • If you w ant to ret urn to the pre vio us menu, h ighlight RET URN and press OK.
34 Changing/disabling prog r amme positions Changing /disab lin g pr ogramme positi ons After setting the channels, you can change the programme positio ns as you lik e. If any p rogramme posi tions are unused o r contain unw anted channels, you can disable them.
Getting Started 35 Changing/disabling prog ramme positions Tip • If you w ant to ret urn to the pre vio us menu, h ighlight RET URN and press OK. Note • The menu disappears autom atically if you don ’t proceed for more than a few minutes. 4 Press M / m until the selected channel ro w moves to the desired progr amme posit ion.
36 Changing/disabling prog r amme positions Tip • If you wa nt to re turn to the pr ev ious menu, h ighlight RE TURN and press OK. Notes • The menu disappe a rs automati cally if you don’ t proceed for more than a fe w minutes. • Be su r e to select t he progra mme posit i on you want t o di sable corr e c tly .
Getting Started 37 Changing/disabling prog ramme positions Changing the st ation names ( not a vai lable on SL V -SE610N/K) Y ou can change or enter the station names (up to 5 characters). The VCR mus t recei ve channel in formation (for instance, SMAR TLINK information) for s tation names to appear automatically .
38 Changing/disabling prog r amme positions Tip • If you wa nt to re turn to the pr ev ious menu, h ighlight RE TURN and press OK. Notes • The menu disappe a rs automati cally if you don’ t proceed for more than a fe w minutes. • If you enter a symbol in step 5, it will appear as a blank space in the display window .
Getting Started 39 Setting the Canal Plus decoder (not a v ailable on SL V -SE610N/K) Sett in g the Ca nal Pl us deco de r (not a v ailab le on SL V -SE610N/K) Y ou can watch o r record Can al Plus p rogrammes if y ou connect a decoder (not supplied) to the VCR .
40 Setting the Canal Plus decoder (not a vailab le on SL V - SE 610N/K ) 1 Press MENU, then press M / m to highli ght OPTIONS an d press O K. 2 Press M / m to highli ght OPTIONS-2, then press OK. 3 Press M / m to highli ght DECODER/ LINE3* 1 (or DECODER/LINE2* 2 ), then press OK.
Getting Started 41 Setting the Canal Plus decoder (not a v ailable on SL V -SE610N/K) 6 Press MENU again. Th en press M / m to highlig ht SETTIN GS and press OK. 7 Press M / m to highlig ht TUNER, then press OK. 8 Press M / m to highlight NORMAL/ CA TV , then press OK.
42 Setting the Canal Plus decoder (not a vailab le on SL V - SE 610N/K ) 11 Press M / m to highlight CH ANNEL SET , then p ress OK. 12 Press M / m to select the Canal Plus channels, then pr ess OK. 13 Press M / m to highli ght P A Y -TV / CAN AL+, then pres s OK.
Getting Started 43 Setting the Canal Plus decoder (not a v ailable on SL V -SE610N/K) Tip • If you w ant to ret urn to the pre vious menu, hig hlight RETU RN and press OK. Notes • The menu disappe ars auto matica lly if you do n ’ t proceed for more than a few minutes.
44 Play ing a tape Basi c Oper atio ns Pla ying a tape Before y ou star t... • Refer to “ Ind e x to part s an d co ntrols ” for bu tton loca tions.
45 Pla ying a tape Basic Oper ations Notes • The counter resets to “ 0:00 :00 ” when ev er a tape is re inserted. • The coun ter stops counti ng when it come s to a port ion with no recor di ng. • The t ime coun ter does not ap pear on the TV screen when using an NTSC -recorde d tape.
46 Recording TV programmes Recording TV pr ogram m e s Before y ou star t... • Refer to “ Ind e x to part s an d co ntrols ” for bu tton loca tions. T o s top recor ding Pre ss x ST OP. 1 T urn on your TV an d set it t o the video channel. T o record from a decoder , turn it on.
47 Recording TV programmes Basic Oper ations T o chec k the remaining time Press DISPLA Y . W ith the display on, press COUNTER/REMAIN to check the rema ining time. Each time you press COUNTER/REMAIN, the time counter and the r emaining time appear alternately .
48 Recording TV programmes Notes • The DIS PL A Y informa tion does no t appear dur i ng still ( pause) mode or slow- motio n pl ayback. • The DISP LA Y inf orm ation wil l n ot ap pear w hil e pl ayin g an N TSC -reco rded tape.
49 Recording TV programmes Basic Oper ations Notes • Y ou can not rec ord what you are watchi ng using t hi s meth od when the VC R is in the follo wing modes; pa use , timer sta ndb y , tuner pres et , Auto Set Up, and recording.
50 Recording TV progr ammes us ing the Dial Timer (SL V -SE810N/K only) Recor ding TV pr ogrammes us ing the Dia l Timer (SL V -SE810N/K onl y) The Dial T imer function allows you to make timer recording s of prog rammes without turning on your TV .
51 Recording TV p rogr ammes usin g the Dial Timer (SL V -SE810N/K only) Basic Oper ations 3 Press DIAL TIMER. “ ST AR T ” and the current time appear alternately in the display window .
52 Recording TV progr ammes us ing the Dial Timer (SL V -SE810N/K only) T o return to the pre vious step T o retur n to the pre vious step, press the PR OGRAM + and – b uttons on the VCR at the same time during an y of the Dial T imer settings. T o s top recor ding T o stop the VCR while recording, press x STO P .
53 Recording TV p rogr ammes usin g the Dial Timer (SL V -SE810N/K only) Basic Oper ations T o set the cloc k Tips • T o cancel a Dial T im er setting, press x (stop) on t he VCR whi le you are ma king the setting. • The prog ramme is recorde d i n t he cu rrent tape s peed mode.
54 Recording TV progr ammes us ing the Dial Timer (SL V -SE810N/K only) About the Demonstration Mode The Dial T imer function has a Demonstration Mode that allows th e user , such as a salesperson, to enter more than eig ht examples of timer settings when demonstrating the use of the Dial T imer .
55 Recording TV progr ammes us ing the ShowView system (not av ailab le on SL V -SE610N/K) Basic Oper ations Recor ding TV pr ogra mmes us ing t he Sho wVi e w syste m (not a v ailab le on SL V -SE610N/K) The Sho wV ie w system is the feature th at simplif ies programming the VC R to make timer recordings.
56 Recording TV progr ammes us ing the ShowView system (not availab le on SL V -SE610N/K) 2 Press the pr ogramme number b uttons to enter the ShowV ie w numbe r .
57 Recording TV progr ammes us ing the ShowView system (not av ailab le on SL V -SE610N/K) Basic Oper ations T o s top recor ding T o stop the VC R while recording, press x STOP. Daily/weekly recording In step 4 abov e, press m to s elect the r ecord ing pattern.
58 Recording TV progr ammes us ing the ShowView system (not availab le on SL V -SE610N/K) T o use the VCR after setting the timer T o us e the VCR before a reco rding be gins, just pr ess ? / 1 . The indicator turns off and the VCR switches on. Remember to press ? / 1 to reset the VCR to recording stand by after using the VCR.
59 Recording TV programmes using the timer Basic Oper ations Recor ding TV pr ogrammes using t he time r Y o u can preset a total of eight programmes, including settin gs made with other timer methods. Before y ou star t … • Check that th e VCR clo ck is set to the correct t ime and date.
60 Recording TV progr ammes using t he timer T o s top recor ding T o stop the VCR while recording, press x STO P . Daily/weekly recording In step 2 abov e, press m to select the recording pattern. Each time you press m , the indication changes as sho wn belo w .
61 Recording TV programmes using the timer Basic Oper ations T o record satellit e br oadc asts If you connect a satellite tuner and the VCR , you can record satellite programmes. T o use the V CR after sett ing the timer T o us e the VCR before a reco rding be gins, just pr ess ? / 1 .
62 Recording TV progr ammes using t he timer Notes • When setti ng the timer with VPS/PDC signals, enter the start a nd stop times ex actly as indi cated in the TV pr ogramme guid e.
63 Play ing/searching at v arious speeds Additiona l Operations Additio nal Op er atio ns Pla ying/sear chi ng at v arious speed s Before y ou star t … • Refer to “ Ind e x to parts an d contr o ls ” fo r bu tton loca tions. T o r esume normal pla y back Pre ss H PLA Y.
64 Play ing/searching at v ar ious speeds T o use the shuttle ring in normal mode During playback or pause, turn the s huttle ring clockwise or anticlockwise. Each change in the shuttle ring position ch anges the playback mo de in the following way . T o use the shuttle ring in jog mode Use this mode f or frame-b y-frame pl ayback.
65 Setting the recording duration time Additiona l Operations Settin g the reco rding duratio n tim e After you hav e started recording in the normal way , you can hav e the VCR stop recording autom atically after a specif ied duration. Before y ou star t … • Refer to “ Ind e x to parts an d contr o ls ” fo r bu tton loca tions.
66 Synchronized Recording (not av ailable on SL V -SE610N/K) Sync hr onized Recor ding (not av ailable on SL V -SE610N/K) Y ou can set the VCR to automatically r ecord programmes from equipment such as a satellite tuner by connecting the equipment to the DECODER/ LINE-3 IN* 1 (or DECODER/LINE-2 IN* 2 ) connecto r .
67 Synchronized Recording (not av ailable on SL V -SE610N/K) Additiona l Operations T o c ancel the Sync hr onized Recording function Press SYNCHRO RE C. The SYNCHRO ind icator disappears. T o s top recor ding Pre ss x ST OP while recording. Notes • This functio n may no t work with some ty pes of satel lite tuners.
68 Checking/changing/cancelling timer settings Chec ki ng /ch anging/ cancell in g timer settings Before y ou star t … • T urn on your TV an d set it to the vi deo ch annel. • Refer to “ Ind e x to part s an d co ntrols ” for bu tton loca tions.
69 Checking/changing/cancelling timer settings Additiona l Operations When th e timer se ttings overlap The programme t hat starts f irst has pri orit y and the second programme st arts recording onl y after th e firs t programme has fi nished. If the programmes start at the same time, the programme li sted f irst in the menu has priority .
70 Recording stereo and bilingual progr ammes Recor ding stereo an d bi ling ua l pr ogrammes In ZWEIT ON (German stereo) system This VCR automatically receiv es and records stereo and b ilingual programmes bas ed on the ZWEIT ON system. When a stereo or bilingu al programme is recei v ed, the STEREO indicator appears in the display windo w .
71 Recording stereo and bilingual programmes Additiona l Operations * Usually the main sound (mona u ral) Selecting t he sound during pla yback Press A UDIO MONITOR to select the sound you want. How sound is recor ded on a video tape The VCR records sou nd onto tw o separate tracks.
72 Recording stereo and bilingual progr ammes Notes • T o listen to pl ayback s ounds in stereo, you must use the Scart or A UDIO OUT connect ions. • When yo u play a tap e recorded in monaur al, t he so und is hea rd in mon aural regardless of the A UDIO MONITOR setting.
73 Searching using the Smar t Search function Additiona l Operations Sear ching usi ng the Smar t Sear c h funct ion If you recor d multiple programmes on a tape, you can us e the Smart Search function to see what has been r ecorded on yo ur tape. Y ou can see infor mation such as date, time, and programme position of the programmes r ecorded.
74 Searching using th e Smar t Search f unction T o record in a blank spac e Blank space on the tape will appear as a blank ro w in the SMAR T SEARCH screen. Select the last blank ro w i n step 3, then press OK. The VCR re wind s/fast -forwards the tape to the beginnin g of the blank space, then stops.
75 Storing, sear ching and deleting programme information (S mar t Search P lus) Additiona l Operations Stor ing , s ea rc hing an d de leti ng pr ogramme inf ormati on (Smar t Sear c h Plus ) Y ou can store programm e information, such as the recording date and time, and programme position, for a maximum of four tapes.
76 Storing, searching and deleting programme inf ormation (Smar t Search Plus) T o assign a memo ry number after recording After recording a programme, yo u can store the prog ramme information as a n e w memory befor e ejecting the cassette. Ho we ver , you cannot add th e memory on the existed memory bank number .
77 Storing, sear ching and deleting programme information (S mar t Search P lus) Additiona l Operations Searc hing f or pr ogramme inf ormation stor ed on the memory bank number Y ou can start playback of the recor ded programme after call th e programme informati on from the f our memory b ank numb ers.
78 Storing, searching and deleting programme inf ormation (Smar t Search Plus) T o exit the SMAR T SEARCH scr een Press SMAR T SEARCH. Recallin g the most re cent programme information Programme i nformatio n that is no t sa ved in one of the memory bank numbers is erased when the cassette is ejected.
79 Storing, sear ching and deleting programme information (S mar t Search P lus) Additiona l Operations Note • Y ou can not u s e or retur n the delet ed in f ormat ion.
80 Searching using th e inde x function Sear chin g using th e inde x function The VCR automatically marks the tape with an index signal at the point where each recording be gins. Use thes e signals as refere nces to f ind a specif ic recording. T o s top sear ching Pre ss x STOP.
81 Adjusting the picture Additiona l Operations Adju s tin g th e pict ure Adjusting t he trac king Although the VCR autom atically adjusts the tracking when playing a tape (the indicator flashes in the d isplay windo w , then turns off), distortion may occur if the recording is in poor condition.
82 Adjusting the picture About the Opti m um Picture Contr ol ( OPC) function The Optimum Picture Control (OPC) function automatically im pro ves recording and playback quality b y adjusting the VCR to the condition of the video heads and tape.
83 Reducing the VCR ’ s power consumption Additiona l Operations Redu cing the VCR ’ s po wer consumpt ion Y o u can turn off the indicators in the display window when the VCR is off (standb y mode) to redu ce the VCR ’ s po wer consump tion. T o turn on t he indicat ors in the disp la y window Set POWER SA VE to OFF in step 4.
84 Changing menu options Changing men u opt ions Menu choices Initial settings are indicated in bold print. OPTIONS -1 1 Press MENU, then select OPTIONS and press OK . 2 Pre ss M / m to highlight OPTIONS-1 or OPTIONS-2, then press OK. 3 Pre ss M / m to select the op tion, then press OK.
85 Changing menu options Additiona l Operations OPTIONS-2 HIFI A UDIO* 1 • NICAM to re cord NICAM broad cas ts on the hi-f i audio track. • ST AND ARD to re cord s tandar d soun d on t he hi -f i audi o track.
86 Changing menu options Notes • When the VCR stand s by for recordin g, the indicat ors in t he d isplay window remain lit e v en when PO WER SA VE is set to FULL, P AR TIAL or ON.
87 Connecting to a VCR or stereo system Editing Editing Connecti ng to a VCR or stereo system How to connect to recor d on this VCR Connect the line outputs of the other VCR to the LINE IN connector or jacks of this VCR. Ref er to the e xamples A through C and choose the connection that best suits your VCR.
88 Connecting to a VCR or stereo system Example C How to connect to a stereo syst em (SL V -SE810N/K o nly) Connect the t LINE-2 L o R j acks on thi s VCR to the audio out put jacks on the stereo s ystem, using the RK-C5 10HG audio cable (not s upplied).
89 Basic editing Editing Basi c edit ing (when recor ding on this VCR) Before y ou star t ed iting • T urn o n your TV a nd set it to the video channel . • Press INPUT SELECT t o display t he connect ed line in the disp lay window . • Press SP/LP t o select the ta pe speed, S P or LP .
90 A udio dubbi ng (SL V -SE810N/K only) A u di o du bbin g (SL V -SE810N/K onl y) T o stop edit ing Pre ss x (st op) on thi s VCR and the stereo sys tem (or other VCR). T o li sten to both the hi-fi and normal audio Set A UDIO MIX to ON in the OPTIONS-1 menu (page 84).
91 T roubleshooting Additional Inform ation Additional Inf ormation T r oub lesh ooting If you ha v e an y questi ons or pr oblems not co v ered belo w , pl ease consult y our nearest Sony service facility . Symptom Remedy Po w e r The ? / 1 (on/st andby) switch does no t functi on.
92 T roubleshooting Pl ayb a ck The picture rolls vertic ally during picture se arch. • Adjust the vertica l hold contro l on the TV o r monitor . The pictu re has no sound. • The tape i s def ecti v e. • If you mad e A/V connecti ons, che ck t he audio cabl e connect ion.
93 T roubleshooting Additional Inform ation Timer recor ding The timer do es no t operate. • Check t hat the clock is se t. • Make sure a tape has b een inserted. • Check th at the safety tab has not been remo v ed. • Make su re the tape is not at it s end.
94 T roubleshooting P A Y-TV/Canal Plus Y o u canno t set channe ls a s P A Y -T V/ Canal Pl us in the TUNER menu. • Check that DECODER/LINE3 (or DECODER/LINE2) in the OPTIONS-2 menu is set to DECODER (see page 85). Y o u canno t watch Cana l Plus progra mmes when the VCR is in standby mode.
95 T roubleshooting Additional Inform ation Symptoms caused by con taminated video heads • Normal picture • Rough pic ture initial contamination • Unclear picture • No picture (or blac k &.
96 Specifications Specification s System Ch an n el cove ra ge P AL (B/G, D/K) VHF E2 – E12, R 1 – R12 UHF E21 – E69, R2 1 – R69 CA TV S1 – S41, S01 – S05 RF o utput signal UHF channels 21 – 69 Aerial out 75-ohm asymme trical aerial socket Ta p e s p e e d SP: P AL/MESECAM 23.
97 Specifications Additional Inform ation General Power requirements 220 – 240 V A C, 50 Hz Power consumptio n 20 W 1.2 W (PO WER SA VE is set to FULL/ ON, minim um) Operating tem p er ature 5 ° ° ° ° C to 40 ° ° ° ° C Storage t emp erature – 20 ° C to 60 ° C Dimensi o ns inclu di ng projec ting pa rts and controls Approx.
98 Inde x Inde x A Adju stin g picture 33 , 81 tracking 81 Aerial hookup 15 AFT (Auto Fin e Tuning) 33 Audio d ubbing 90 Audio t rack 71 Auto Cloc k Set 27 Auto Long Play 85 Auto S e t Up 22 C Canal P.
.
Sony Corpor ation Quick Start Guide 1 Connecting the VCR 1 ... Conn ect the ae rial to AERIAL IN of t h e VC R. 2 ... Conne ct AER IAL OUT th e a er ia l i np ut of yo ur TV us ing the supp lied ae ri al cable.
Ein wichtiger Punkt beim Kauf des Geräts Sony SLV-SE810K (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony SLV-SE810K noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony SLV-SE810K - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony SLV-SE810K reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony SLV-SE810K erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony SLV-SE810K besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony SLV-SE810K verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony SLV-SE810K. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony SLV-SE810K gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
