Benutzeranleitung / Produktwartung SLV-SE740G/I des Produzenten Sony
Zur Seite of 80
3-090-240- 14 (2) GB Video Cassette Recor der Oper ating In structions SL V -SE840G SL V -SE740G/I SL V -SE240G/I © 2004 Sony Cor poration PA L.
2 W A RNING W ARNING T o pr e v ent f ire o r sh ock haz ard, do not e xpos e the unit to rain or moisture. T o av oid electrica l shock, do not open the cabinet. Refer servicing to qualified personnel only . T o pre ve nt f ire o r shock h azard , do not pla ce objec ts filled with liquids, such as vases, on the apparatus.
T able of contents Getting Started 3 T able o f contents Getting Started 4 Inde x to parts and contr ols 11 St ep 1 : U n pac king 12 Step 2 : Se tting u p the remo te comma nder 16 Step 3 : Con necti.
4 Inde x to par ts and controls Getting Started Inde x to par ts and con t r ols Refer to the pages indicated in parentheses ( ) for details. Front panel For SL V -SE840 G A ? / 1 (on/s tandb y) swit .
5 Index t o par ts and controls Getting Started For SL V -SE740G /I A ? / 1 (on/s tandb y) swit ch B Rem ote s ens or (12 ) C T ape compartment D A (eject) b utton (34) E H (play) but ton* (35) (5 3)/.
6 Inde x to par ts and controls For SL V -SE240 G/I A ? / 1 (on/s tandb y) swit ch B A (eject) b utton ( 34) C Rem ote s ens or (12 ) D T ape compartment E H (play) but ton* (35)/ M (f ast- forwar d)/.
7 Index t o par ts and controls Getting Started Displa y window For SL V -SE840G and SE740G/I A T ape in dic ator B VIDEO indicat or (17) ( 38) C T ime counter/clock/line/prog ramme positi on indicato.
8 Inde x to par ts and controls Rear panel For SL V -SE840G a nd SE740 G/I For SL V -SE240 G/I A (in fr om antenna) connector (16 ) (17) B LINE-3 connector * 1 LINE-2 connector * 2 (19) (69) C Mains l.
9 Index t o par ts and controls Getting Started Remote commander A Z (eject) b utton (34) B (wide) b utton ( for TV ) (14) (15) C DISP LA Y butto n (1 4) ( 35 ) (3 8) D COUNTER/REMAIN button (38) E Pr.
10 Inde x to par ts and controls N [TV] / [VIDEO ] r emo te co ntro l sw itch (12) O ? / 1 (on/s tandb y) switc h (13) (14 ) (48) P A UDIO MONITOR bu tton* 1 * 3 (14) (60) Q t TV/VIDEO b utton (13) (1.
11 Unpacking Getting Started Step 1 : Unpac king Check that you ha ve recei ved the follo wing items with the VCR: Note • The supplied remote command er is for the e xclusi ve u se of this VCR.
12 Setting up the remot e commander Step 2 : S etting up the remote co mmander Inserting the batteri es Insert two R6 (size AA) batteries by matching t he + and – on th e batteries to the diagram inside the battery compar tment.
13 Setting up the remot e commander Getting Started TV contr ol butt ons To Press Set th e TV to standb y mode ? / 1 Select an input so urce: aeria l in or li ne in t TV/VIDEO Select the TV’ s progr.
14 Setting up the remot e commander Notes • W ith no rmal use, th e batteri es should last ab out three to six mont hs. • If you do not use the remote commander for an extended period of time, remove the batte ries to a v oid possible damage fro m battery le akage.
15 Setting up the remot e commander Getting Started Code numbers of contr o llable TVs If more than one code number is listed, try entering them one at a time until you f ind the on e that w orks with your TV . T o switch to wide mode, see the footnotes below this table for th e applicable code numbers.
16 Connecting the VCR Step 3 : C onnecting the VCR If your TV h as a Scart (EUR O-A V) connector , see page 17 . If y our TV does not ha ve a Scart (EUR O-A V) connector Note • When yo u conne ct the VCR a nd y our TV on ly with an aeria l cable, you have to tune yo ur TV to the VCR (se e page 20 ).
17 Connecting the VCR Getting Started If y our TV has a Scart (EURO- A V) connector 1 Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. 2 Connect of the VCR and the aerial in put of your TV using th e supplied aerial cable.
18 Connecting the VCR About the SMARTLINK f eatures (not a v ailable on SL V -SE240G/I) If the connected T V complies with SMAR TLINK, MEGALOGIC* 1 , EASYLINK* 2 , Q-Link* 3 , EUR O VIEW LINK* 4 , or .
19 Connecting the VCR Getting Started Additiona l connections T o a stereo sy stem (no t av ailable on SL V - SE240G/I ) Y ou can improv e sound quality by connecting a stereo system to the A UDIO R, L jacks as sho wn on the right.
20 Setting up the VCR wi th the Auto Set Up function Step 4 : Setting up th e VCR with the A uto Set Up fu ncti on Before using the VCR for the first time, set up the VCR usi ng the Auto Set Up function. W ith this function, you can set the TV channels, guide chann els f or the VIDEO Plus+* system, and VCR clock automatically .
21 Setting up the VCR with t he Auto Set Up function Getting Started Notes • Whe never you operate t he Auto Se t Up fu nct ion, some of th e settings (VIDEO Plus+, t imer , etc.
22 Downloading the TV tuner’ s preset data (not av ailab le on SL V -SE 240G/I) Downl oading the T V tuner’ s preset data (not av ailabl e on SL V -SE240G/I) Y ou can do wnload your TV tuner’ s preset data to the VCR and tune th e VCR according to that d ata using the SMAR TLINK connection.
23 Selecting a language Getting Started Sel ecting a lang uage If you pref er an on-scre en language other than En glish, us e the on- screen display to select another language. Before you start … • T urn on t he VCR a nd the TV . • Set th e T V to the vide o chann el.
24 Presetting channels Presetting c h annels If some chan nels could not be preset using the Au to Set Up funct ion, you can preset them manu ally . Before you start … • T urn on the VCR and the TV . • Set the TV to th e video c hannel. • Refer to “Index to parts and con t rol s” for button locations.
25 Presetting channels Getting Started 4 Press < / , repeatedly until the channel you wan t is display e d. 5 Press M / m to highlight NAME, then pres s , . 6 Enter the station name. 1 Pre ss M / m to select a char acter . Each time you press M , the character changes as sho wn belo w .
26 Presetting channels If the picture is not clear If the pictur e is not clear , you may use the Manual Fine T uning (MFT) func ti on. Af ter ste p 4, pr ess M / m to select MFT . Press < / , to get a clear picture, then pres s MENU to ex it the menu.
27 Changing/disabling programme positions Getting Started Changi ng/dis ab ling p r ogramme posit ions After setting the chann els, you can change the programme p ositions as you lik e. If any programme positions are unused or contain unwan ted channels, you can disable them.
28 Changing/disabling prog ramme positions Disabli ng unwanted pr ogramme positions After presetting channels, you can dis able unused programme positions. The disab led positions will be sk ipped later when you press the PR OG +/– b uttons. Before you start … • T urn on the VCR and the TV .
29 Changing/disabling programme positions Getting Started Note • Be sure t o select the pro gramme po sition you want to d isable correctly . If you disable a p rogramme p osition by mist ake, you need to reset t hat channe l manually . 2 Press M / m to highlight MANUAL SET UP , then press , .
30 Changing/disabling prog ramme positions Changing the s tation names Y ou can change or enter the station names (u p to 4 characters). Th e VCR must recei ve chan nel information for sta tion nam es to appear automatically . Before you start … • T urn on the VCR and the TV .
31 Changing/disabling programme positions Getting Started 5 Enter the station name. 1 Pre ss M / m to select a char acter . Each time you press M , the character changes as sho wn belo w . A t B t … t Z t 0 t 1 t … t 9 t A 2 Pre ss , to set the next character .
32 Setting the cloc k Sett in g the cloc k Y ou must set the time and date o n the VCR to use the timer features properly . The Auto Clock Set functio n works only if a station in your area is broadcasti ng a time signal. Before you start … • T urn on the VCR and the TV .
33 Setting the clock Getting Started Tips • If you set A UT O CLOCK to ON, th e Auto Clock S et function is acti va ted whene ver the VCR is turned o f f. The time i s adjusted au tomatically by ma king reference to the time sig nal from t he station.
34 Play ing a tape Basi c Oper ati ons Playing a tape Before you start ... • Refer to “Index to parts and con t rol s” for button locations. Additional tasks 1 T urn on your TV and set it to the video channel. 2 Inser t a tap e. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed.
35 Play ing a tape Basi c Oper a tio ns Using Playbac k Dial on the VCR W ith Playback Dial, yo u can oper ate the follo wing playback optio ns. Note • Do not turn Playb ack Dial forcibl y . It may damage Play back Dial. T o use the time counter Press CLEAR at the point on the tape that you want to find later .
36 Play ing a tape Starting playbac k automaticall y wit h one button (One T ouch Pla y) (not av ailable on SL V -SE240G/I) If you use the SMAR TLINK connection, you can turn on the TV , set the TV to the video chann el, and start play back au tomatically with one button .
37 Recording TV programmes Basi c Oper ati ons Recor ding TV pr ogrammes Before you start... • Refer to “In dex to parts and cont rol s” for b utton loca tions. 1 T urn on your TV and set it to the video chan nel. T o record from a satellite or digital tuner , turn it on.
38 Recording TV programmes T o s top recording Pre ss x (s top). T o check the r emaining time Press DISPLA Y twice. W ith the display on, press COUNTER/REMAIN to check the remaining time. E ach time you press COUNTER/REMAIN, the time counter and the remaining time appear alternately .
39 Recording TV programmes Basi c Oper a tio ns T o save a recording T o prev ent accidental erasure, br eak of f the safety tab as illust rated. T o record on the same tape again, co v er the tab hole with adhesi v e tape. Tips • T o select a programme po sition, you can use the program me number b uttons on th e remote commander .
40 Recording TV programmes Recordi ng what y ou are watching on the TV (TV Direct Rec) (not a v ailable on SL V -SE240G/I) If you u se the SMAR TLINK connection, yo u can eas ily rec ord what y ou are watching o n the TV (other than tapes bein g played on the VCR).
41 Recording TV programmes using the Dial Timer (SL V -SE840G only) Basi c Oper a tio ns Recor ding TV pr ogrammes using th e Dial Timer (SL V -SE840G onl y) The Dial T imer function allows you to make t i mer r eco rd ings of p rog ra mme s without turning on your TV .
42 Recording TV programmes using the Dial Timer (SL V -SE840G only) 3 Press DIAL TIM E R. “ST AR T” and the current time ap p ear alternately in the display window .
43 Recording TV programmes using the Dial Timer (SL V -SE840G only) Basi c Oper a tio ns T o return to the pre vious step T o retu rn to the previous step, pres s the PR OGRAM + and – buttons on the VCR at the same time during any of the Dial T imer settings.
44 Recording TV programmes using the Dial Timer (SL V -SE840G only) T o set the cloc k Tips • T o cancel a Dial T imer setting, pr ess x (stop) on the VCR while you ar e makin g the setting. • The pr og ramme is reco rded in the curre nt t ape speed mod e.
45 Recording TV programmes using the Dial Timer (SL V -SE840G only) Basi c Oper a tio ns About the Demonstration Mode The Dial T imer function h as a Demonstration Mode that allows the user , such as a salesperson, to enter more th an eight examples of timer settings when demonstrating the use of the Dial T imer .
46 Recording TV programmes using the VIDEO Plus+ ® system (not av ailable on SL V -SE240G) Recor ding TV pr ogrammes us in g the VIDEO Pl us+ ® syste m (not av ailable on SL V -SE240G) The VIDEO Plus+ system is th e f e ature th at sim plifies programming the VCR to make timer recordings.
47 Recording TV programmes using the VIDEO Plus+ ® system (not av ailable on SL V -SE240G) Basi c Oper a tio ns 2 Press the pr ogramme number b utto ns t o en ter t he P lusCo de numb er . If you mak e a mistake, press CLEAR and re-enter th e correct numb er .
48 Recording TV programmes using the VIDEO Plus+ ® system (not av ailable on SL V -SE240G) T o s top recording T o stop the VCR while recording, p ress x (stop). Daily/weekly recording In step 4 abov e, press m to s elect the r ecording pattern. Each time you p ress m , the indi cati on ch anges as sho wn belo w .
49 Recording TV programmes using the VIDEO Plus+ ® system (not av ailable on SL V -SE240G) Basi c Oper a tio ns T o use the VCR a fter setting t he timer T o use the VCR be fore a recordi ng be gins, just press ? / 1 . The indicator turns of f and the VCR switches on.
50 Setting the timer manually Setti ng the ti mer man uall y Y ou can preset a total of eight programmes, including settin gs made with other timer methods. Before you start … • Check th at the VCR clock is set to the correct tim e and date. • Insert a tap e with its sa fety tab in pla ce.
51 Setting the timer m anually Basi c Oper a tio ns To s t o p r e c o r d i n g T o st op the VCR while recording, press x (stop). Daily/weekly recording In step 2 abov e, press m to select the recording pattern. Each time you press m , the indication changes as sho wn below .
52 Setting the timer manually T o us e the VCR a fter settin g the timer T o use the VCR before a r ecording be gins, just press ? / 1 . Th e indicator turns off and the V CR switch es on. R emember to press ? / 1 to reset th e VCR to recording stand by after using the VCR.
53 Pla ying/searching at various speeds Additio nal Op er atio ns Additio nal Ope ratio ns Pla ying/sear ching at v arious speeds Before you start … • Refer to “I n dex to parts and cont rol s” for button locatio ns. Playba c k options T o resume normal playback Pre ss H (pla y) .
54 Play ing/searching at various speeds Tip • Adjust the pictu r e usi ng the PROGRAM +/– buttons on the VCR if : – S treaks appear while playing in slo w motion. – Bands appe ar at th e top o r b ottom wh ile pau sing. – The picture shakes whi le pausi n g.
55 Setting the recording duration time Additio nal Op er atio ns Set tin g the rec o rding du rat ion t im e After you h av e start ed recordi ng in the normal way , you can ha ve the VC R stop recording automa tically af ter a specified d uration. Before you start … • Refer to “I n dex to parts and cont rol s” for button locatio ns.
56 Synchronized Recording (not available on SL V -SE240G/I) Sync hron ized Rec or ding (not av ailabl e on SL V -SE240G/I) Y ou can set th e VCR to automatically record programmes fro m equipment such as a satellite tuner by connecting the equipment to the LINE-3 (DEC/ EXT)* 1 (or LINE-2 (DEC /EXT)* 2 ) conn ector .
57 Synchronized Recording (not av ailable on SL V -SE 240G/I) Additio nal Op er atio ns T o cancel the Synchr onized Recording function Press SYNCHR O REC on the VCR. Th e SYNCHRO REC indicator disap pears. To s t o p r e c o r d i n g Pre ss x (stop) while recording.
58 Checking/changing/cancelling timer settings Checking/cha nging/ canc elli ng tim er settings Before you start … • T urn on your TV an d set it to the vide o chann el . • Refer to “Index to parts and con t rol s” for button locations. 1 Pre ss ? / 1 to turn on the VCR.
59 Checking/changing/cancelling timer settings Additio nal Op er atio ns When th e timer se ttings overlap The programme t hat starts f irst has pri ority and the second programme st arts recording only after th e fi rst programme has f inished. If the programmes start at the same time, the program me li sted first in the menu has priority .
60 Recording stereo and bilingual progr ammes (not av ailab le on SL V -SE240G/I) Recor din g stereo and bilingu al pr ogrammes (not a v ailable on SL V -SE240G/I) In the NICAM system This VCR receiv es and records stereo and bilingual programmes based on the NICAM system (NICAM appears on th e TV screen).
61 Recording stereo and bilingual progr ammes (not availab le on SL V -SE240G/I) Additio nal Op er atio ns Selecting t he sound during Hi-fi playbac k Press A UDIO MONIT OR to select th e sound yo u want.
62 Searching using the index function (not av ailable on SL V -SE240G/I) Sear chin g using t he inde x function (not av ailabl e on SL V -SE240G/I) The VCR automatically marks the tape with an index signal at the point wher e each recording be gins. Use these signals as references to find a specif ic recording.
63 Searching using the index f unction (not av ailable on SL V -SE 240G/I) Additio nal Op er atio ns Notes • No inde x si gn al will be added when reco rdi ng starts from recording paus e. Howe ver , an in dex signal will be mark ed if yo u change the programm e position during re cordi ng paus e.
64 Adjusting the picture Adjusting the pi cture Adjusting t he tracki ng Although the VCR autom atically adjusts th e tracking when playing a t ape, dist ortion may occur if the recording is in poor condition . In this case, manually adjus t the tracking.
65 Reducing the VCR’ s power consumption Additio nal Op er atio ns Reducin g the VCR’ s power consum ption Y ou can tu rn off the indicators in the display window when the VCR is off (standb y mode) to reduce the VCR’ s pow er consump tion. T o turn on the indicators in the display window Set POWER SA VE to OFF in step 3.
66 Changing menu options Changing men u opti ons Menu choices Initial settings are indicated in bold print. USER SET 1 Press MENU, then select USER SET or EASY OPERA TION and press OK. 2 Pre ss M / m to select the option. 3 Pre ss , to ch ange the setting, then pr ess OK.
67 Changing menu options Additio nal Op er atio ns EASY OPE RA TION * n ot av ailab le on SL V -SE24 0G POWER SA VE • ECO 1 t o turn off th e in dica to rs in the di splay wi ndow to conserve the VCR’ s power .
68 Connecting to a VCR or st ereo system Editing Connecting to a VCR or stereo system How to connect to r ecord on this VCR Connect th e line output s of the oth er VCR to th e input conn ector of this VCR. Refer to the e xamples A thro ugh C and choo se the connection that best su its your VCR.
69 Connecting to a VCR or stereo system Editing Example C How to connect to a stereo system (SL V -SE840G only) Connect the t LINE-2 L o R jacks on this VCR to th e audio output jacks on the stereo s ystem, using an au dio cable (not s upplied). Notes • Make sure you connect the p lugs to jac ks of the same colo ur.
70 Basic editing Basic edit in g When recor ding on t his VCR Before you start editing • T urn on your TV an d set it to the vide o channel . • Press INPUT SE LECT to displa y the connect ed line in t he di splay window . • Press SP/LP to selec t the tape speed, SP or LP .
71 A udio dubbing (SL V -SE840G only) Editing A u di o dubb in g (SL V -SE840G onl y) This feature lets you record o ver the no rmal audio track. The mo naural sound pre viously recorded is re placed while the original hi-f i sound remains unch anged.
72 T r oubleshooting Additional Inf ormation T ro ubl eshooti ng If you h av e an y questi ons or p roblems not cov ered belo w , please consult your nearest Sony service facility . Symptom Remed y Po w e r The ? / 1 (on/ standby) switch does not func tion.
73 T r oubleshooting Additiona l Inform ation Playb ack The s ound f rom a ta pe recorded with the VCR i s not in ster eo or t he STEREO indi cator in the displa y window is flashing. • Adjust the trackin g. • The vide o heads are d irty . Clean the vi deo hea ds usin g a Sony vid eo h ead cle ani ng casse t te as explain ed above.
74 T r oubleshooting Timer record ing The P DC fun ction does not operat e prope rly . • Check that th e clock and the date are set c orrectly . • Check th at the PDC time you set i s th e co rrect one (th ere might be a mist ake i n the TV programme gu ide).
75 T r oubleshooting Additiona l Inform ation Others The VCR nee ds to be cleaned. • Cle an th e cabi net, panel a nd co ntrols with a dry , soft clot h, or a soft cl oth slightl y moistened with a mild deter gent solution. Do not use any typ e of solve nt, such as alcoho l or benzin e.
76 Specifications Specification s System Ch a nn el c ove r ag e PA L ( I ) VHF IA t o I J, SA10 to SA1 3* UHF B21 to B69 CA TV S0 1 to S0 5, S1 to S2 0* HYPER S2 1 to S41* RF o utput signa l UHF channels 2 1 to 69 Aerial out 75-ohm asymme trical aeria l socket Ta p e s p e e d SP:P AL23.
77 Index Inde x A Adju stin g pict ure 64 tracki ng 64 Aerial hook up 16 Audio d ubbin g 71 Audio m onitor 60 , 61 Audio t rack 61 Auto Clock Se t 20 Auto S e t Up 20 C Changi ng t he progra m m e pos.
.
.
AC68-02181A Sony Corporation Printed in Indon esia Quick Start Guide 1 Connecting the VCR 1 ... Connect the aerial to of the VCR. 2 ... Connect and the aerial input of you r TV using the supplied aerial cable.
Ein wichtiger Punkt beim Kauf des Geräts Sony SLV-SE740G/I (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony SLV-SE740G/I noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony SLV-SE740G/I - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony SLV-SE740G/I reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony SLV-SE740G/I erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony SLV-SE740G/I besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony SLV-SE740G/I verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony SLV-SE740G/I. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony SLV-SE740G/I gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
