Benutzeranleitung / Produktwartung SLV-SE440K des Produzenten Sony
Zur Seite of 88
3-090-242- E2 (1) GB Video Cassette Recor der Oper ating In structions SL V -SE840N SL V -SE740N SL V -SX740N SL V -SE640N SL V -SE440K © 2004 Sony Cor poration PA L.
2 W A RNING W ARNING T o pre vent f ire o r shoc k hazard , do no t exp os e the unit to rain or moisture. T o av oid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . T o pre ve nt f ire o r shock h azard, do not place o bjects filled with liquids, such as vases, on th e apparatus.
3 T able of contents Getting Started T able o f contents Getting Started 4 Inde x to parts and contr ols 11 St ep 1 : U n pac king 12 Step 2 : Se tting u p the remo te comma nder 16 Step 3 : Con necti.
4 Inde x to par ts and controls Getting Started Inde x to par ts and con t r ols Refer to the pages indicated in parentheses ( ) for details. Front panel For SL V -SE84 0N A ? / 1 (on/s tandb y) swit .
Getting Started 5 Index t o par ts and controls For SL V -SE 740N, SX74 0N and SE 640N A ? / 1 (on/s tandb y) swit ch B Rem ote s ens or (12 ) C T ape com partment D A (eject) b utton (39) E H (play) .
6 Inde x to par ts and controls For SL V -SE44 0K A ? / 1 (on/s tandb y) swit ch B A (eject) b utton ( 39) C Rem ote s ens or (12 ) D T ape compartment E H (play) but ton* (39) ( 58)/ M (fast-for ward.
Getting Started 7 Index t o par ts and controls Displa y window For SL V -SE 840N, SE74 0N and SX 740N A T ape in dic ator B VIDEO indicat or (17) ( 43) C T ime counter/clock/line/prog ramme positi on.
8 Inde x to par ts and controls Rear panel For SL V -SE840N , SE74 0N, SX740N and SE64 0N For SL V -SE44 0K A (in fr om antenna) connector (16 ) (17) B LINE-3 (DEC/EXT) con nector* 1 LINE-2 (DEC/EXT) .
Getting Started 9 Index t o par ts and controls Remote commander A Z (eject) b utton (39) B (wide) b utton ( for TV ) (14) (15) C DISP LA Y but ton ( 14) ( 40) (43) D COUNTER/REMAIN button (43) E Prog.
10 Inde x to par ts and controls N [TV] / [VIDEO ] r emo te co ntro l sw itch (12) O ? / 1 (on/s tandb y) switc h (13) (14 ) (53) P A UDIO MONITOR bu tton* 1 * 3 (14) (66) Q t TV/VIDEO b utton (13) (1.
Getting Started 11 Unpacking Step 1 : Unpac king Check that you ha ve recei ved the follo wing items with the VCR: Note • The supplied remote c ommander is for th e exclu siv e use of this VCR.
12 Setting up the remot e commander Step 2 : S etting up the remote co mmander Inserting the batteri es Insert two R6 (size AA) batteries by matching t he + and – on th e batteries to the diagram inside the battery compar tment. Inser t th e negative (–) end fir s t , then push in and down until the pos iti ve (+) end clic ks into posit ion.
Getting Started 13 Setting up the remot e commander TV contr ol butt ons To Press Set th e TV to standb y mode ? / 1 Select an input so urce: aeria l in or li ne in t TV/VIDEO Select the TV’ s pro g.
14 Setting up the remot e commander Notes • W ith no rmal use, th e batteri es should last ab out three to six mont hs. • If you do not use the remote commander for an extended period of time, remove the batte ries to a v oid possible damage fro m battery le akage.
Getting Started 15 Setting up the remot e commander Code numbers of contr o llable TVs If more than one code number is listed, try entering them one at a time until you f ind the on e that w orks with your TV . T o switch to wide mode, see the footnotes belo w this table for the applicable code numbers.
16 Connecting the VCR Step 3 : C onnecting the VCR If your TV h as a Scart (EUR O-A V) connector , see page 17. If y our TV does not ha ve a Scart (EUR O-A V) connector Note • When yo u conne ct the VCR a nd y our TV on ly with an aeria l cable, you have to tune yo ur TV to the VCR (se e page 20 ).
Getting Started 17 Connecting the VCR If y our TV has a Scart (EURO- A V) connector 1 Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. 2 Connect of the VCR and the aerial in put of your TV using th e supplied aerial cable.
18 Connecting the VCR About the SMARTLINK f eatures (not av ailab le on SL V -SE640N and SE440K) If the connected T V complies with SMAR TLINK, MEGALOGIC* 1 , EASYLINK* 2 , Q-Link* 3 , EUR O VIEW LINK.
Getting Started 19 Connecting the VCR Additiona l connections T o a stereo sy stem (no t av ail able on SL V -SE640N and SE440 K) Y ou can improv e sound quality by connecting a stereo system to the A UDIO R/D L/G jacks as sho wn on the right.
20 Setting up the VCR wi th the Auto Set Up function Step 4 : Setting up the VCR with the A uto Set Up fu ncti on Before using the VCR for the first time, set up the VCR usi ng the Auto Set Up function.
Getting Started 21 Setting up the VCR with t he Auto Set Up function 4 Press O K. The COUNTR Y SELECTION menu* appears. The abbrevia tions of the countries are as follo ws: 5 Press M / m / < / , to select the abbre viatio n of your co untry fr om the table in st ep 4, then press OK.
22 Setting up the VCR wi th the Auto Set Up function T o c ancel the A uto Set Up function Press MENU. T o chang e the RF chann el If the picture doe s not appear clearly on the TV , change the RF channel on the VCR and TV . Select INST A LLA TION from the menu, then pres s M / m to highl ight VCR OU TPUT CH and press , .
Getting Started 23 Selecting the TV system Step 5 : Selecting th e TV system Y ou must select the appropriate TV system for you r area. Before you start … • T urn on t he VCR a nd the TV . • Set th e T V to the vide o chann el. • Refer to “I n dex to parts and cont rol s” for button locatio ns.
24 Setting the cloc k Sett in g the cloc k Y ou must set the time and date on th e VCR to use the timer featur es properly . The Auto Clock Set functio n * works only if a station in your area is broadcastin g a time signal. Before you start … • T urn on the VCR and the TV .
Getting Started 25 Setting the clock Tips • If you set A UT O CLOCK* to ON, t he Auto Clock Set function is acti v ated whene ver the VCR is turned o f f. The time i s adjusted au tomatically by ma king reference to the time sig nal from t he station.
26 Downloading the TV tuner’ s preset data (S L V -SE840N, SE740N and S X740N only) Downl oading the T V tuner’ s preset data (SL V -SE840N, SE740N and SX740N only) Y ou can dow nload your TV tuner’ s prese t data to th e VCR and tune the VCR according to that d ata using the SMAR TLINK connection.
Getting Started 27 Selecting a language Sel ecting a languag e Y ou can change the on-s creen display langu age from the one yo u selected with the Auto Set Up function. Before you start … • T urn on t he VCR a nd the TV . • Set th e T V to the vide o chann el.
28 Presetting channels Presetting c h annels If some chan nels could not be preset using the Au to Set Up funct ion, you can preset them manu ally . Before you start … • T urn on the VCR and the TV . • Set the TV to th e video c hannel. • Refer to “Index to parts and con t rol s” for button locations.
Getting Started 29 Presetting channels 4 Press < / , repeatedly until the channel you wan t is display e d. 5 Press M / m to highlight NAME, then pres s , . 6 Enter the station name. 1 Pre ss M / m to select a char acter . Each time you press M , the character changes as sho wn belo w .
30 Presetting channels If the picture is not clear If the pictur e is not clear , you may us e the Manual F ine T uning (MFT) func ti on. Af ter ste p 4, pr ess M / m to select MFT . Press < / , to get a clear picture, then pres s MENU to ex it the menu.
Getting Started 31 Changing/disabling programme positions Changi ng/dis ab ling p r ogramme posit ions After setting the chann els, you can change the programme p ositions as you lik e. If any programme positions are unused or contain unwan ted channels, you can disable them.
32 Changing/disabling prog ramme positions Disabli ng unwanted pr ogramme positions After presetting channels, you can dis able unused programme positions. The disab led positions will be sk ipped later when you press the PR OG +/– b uttons. Before you start … • T urn on the VCR and the TV .
Getting Started 33 Changing/disabling programme positions Note • Be sure t o select the pro gramme po sition you want to d isable correctly . If you disable a p rogramme p osition by mist ake, you need to reset t hat channe l ma nu ally . 2 Press M / m to highlight MANUAL SET UP , then press , .
34 Changing/disabling prog ramme positions Changing the s tation names Y ou can change or enter the station names (up to 4 characters). The VCR must recei ve chan nel information for sta tion nam es to appear automatically*. * not available on SL V - SE64 0N and SE44 0K Before you start … • T urn on the VCR and the TV .
Getting Started 35 Changing/disabling programme positions Note • SYSTEM is displayed in MA NU AL TUNING menu (SL V -SE440K only) (see page 34 ) . 5 Enter the station name. 1 Pre ss M / m to select a char acter . Each time you press M , the character changes as sho wn belo w .
36 Setting the Canal Plus decoder Setti ng th e Ca nal Pl us decod er Y ou can watch o r record Can al Plus prog rammes if you connect a deco der (not supplied) to the VC R. Connecting a decoder Setting Canal Plus c hannels T o watch or record Canal Plus pr ogrammes, s et your VCR to recei ve the channels using the on-screen d isplay .
Getting Started 37 Setting the Canal Plus dec oder 1 Press MENU, then pres s M / m / < / , to highlight INST ALLA TION and press OK. 2 Press M / m to highlight MANUAL SET UP , then press , . 3 Press M / m to highlight the row which you want to set for the decoder , then press , .
38 Setting the Canal Plus decoder Notes • T o supe rimpose subtitle s while wat ching Canal Pl us program mes, make b oth deco der- VCR an d VC R-TV co nnecti ons us ing 21 -pin Scart c ables that a re compatible wit h the RGB sign als. Y ou cannot re cord subtitle s on the VCR.
39 Play ing a tape Basi c Oper a tio ns Basic O perations Playing a tape Before you start ... • Refer to “I n dex to parts and cont rol s” for button locatio ns. Additional tasks 1 T urn on your TV and set it t o the vide o channel. 2 Insert a tape.
40 Play ing a tape Using Playbac k Dial on the VCR W ith Play back Dial, you can oper ate the foll owing playback op tions. Note • Do not turn P l ayback Dia l fo rc ibly .
41 Play ing a tape Basi c Oper a tio ns Starting playbac k automatically with one button (One T ouch Play) (not a vailable on SL V -SE640N and SE440K) If you use the SMAR TLINK connection, you can turn on the TV , set the TV to the video chann el, and start pla yback automatically with one b utton.
42 Recording TV programmes Recor ding TV pr ogrammes Before you start... • Refer to “Index to parts and controls” for button locations. 1 T urn on your TV and set it to the video channel.
43 Recording TV programmes Basi c Oper a tio ns To s t o p r e c o r d i n g Pre ss x (sto p). T o check the remaining time Press DISPLA Y twice. W ith the display on, press COUNTER/R EMAIN to check the remaining time. E ach time you press COUNTE R/REMAIN, the time counter and th e remaining time appear alternately .
44 Recording TV programmes T o save a recording T o preven t accidental erasure, break of f the safety tab as illustrated . T o record on the same tape ag ain, cov er the tab hole w ith adhesi ve tape. Tips • T o sele ct a program me position, you can use the progra mme number button s on the remote comma nder .
45 Recording TV programmes Basi c Oper a tio ns Recordi ng what y ou are watching on the TV (TV Direct Rec) (not av ailable on SL V -SE640N and SE440K) If you us e th e SMAR TLINK conn ection, you can eas ily reco rd what you are watching on the TV (other than tapes being played on the VCR) .
46 Recording TV programmes using the Dial Timer (SL V-SE8 40N only) Recor ding TV pr ogrammes usin g the Dial Timer (SL V-SE 840N only) The Dial T imer function allows you to make t ime r r ecor din gs of progr amm es without turning on your TV .
47 Recording TV programmes using the Dial Timer (SL V-SE840N only) Basi c Oper a tio ns 3 Press DIAL TIMER. “ST AR T” and the current time app ear altern ately in the display window .
48 Recording TV programmes using the Dial Timer (SL V-SE8 40N only) T o return to the pre vious step T o return to the previous step, press the PR OGRAM + and – buttons on the VCR at the same time during an y of the Dial T imer settings. T o stop recording T o stop the VCR while record ing, press x (stop).
49 Recording TV programmes using the Dial Timer (SL V-SE840N only) Basi c Oper a tio ns T o set the clock Tips • T o cancel a Dial T imer settin g, press x (s top) on th e VCR whi le yo u are mak ing the setting. • The program me is record ed in the curre nt tape spe ed mode.
50 Recording TV programmes using the Dial Timer (SL V-SE8 40N only) About the Demonstration Mode The Dial T ime r fu nc tio n has a Demo nst rati on Mode that allows the us er , such as a salesperson, to enter more than eig ht examples of timer settings when demonstrating the use of the Dial T imer .
51 Recording TV programmes using the ShowView ® system (SL V-SE840N, SE 740N and SX740N only) Basi c Oper a tio ns Recor ding TV pr ogrammes using th e Sho wV ie w ® system (SL V-SE840N, SE 740N and SX740N onl y) The Sho wV ie w system is the feature that simplifies programming the VCR to make timer recordings .
52 Recording TV programmes using the ShowVie w ® system (SL V-SE840N, SE740N and SX740N only) 2 Press the pr ogramme number buttons to enter the ShowV iew numbe r .
53 Recording TV programmes using the ShowView ® system (SL V-SE840N, SE 740N and SX740N only) Basi c Oper a tio ns To s t o p r e c o r d i n g T o stop the VCR while recording, press x (stop). Daily/weekly recording In step 4 abov e, press m to select the recording pattern.
54 Recording TV programmes using the ShowVie w ® system (SL V-SE840N, SE740N and SX740N only) T o us e the A uto T ape Speed function In step 4 abov e, press m to select A UTO.
55 Recording TV programmes using the timer Basi c Oper a tio ns Recor ding TV pr ogrammes using t he time r Y o u can preset a total of eight programmes, includin g settings made with other tim er methods. Before you start … • Check tha t the VCR clock is set to the correct t im e and date.
56 Recording TV programmes using the timer T o stop recording T o stop the VCR while record ing, press x (stop). Daily/weekly recording In step 2 abov e, press m to s elect the r ecording pattern. Each time you p ress m , the indi cati on ch anges as sho wn belo w .
57 Recording TV programmes using the timer Basi c Oper a tio ns T o use the VCR a fter setting t he timer T o us e the VCR befor e a recordin g be gins, just pr ess ? / 1 . The indicator turns of f and the VCR switches on. Remember to pr ess ? / 1 to res et the VCR to recordin g standb y after us ing the VCR.
58 Play ing/searching at various speeds Additio nal Op er atio ns Pla ying/sear ching at v ariou s speeds Before you start … • Refer to “Index to parts and con t rol s” for button locations. Playba c k options T o r esume normal pla yback Pre ss H (play ).
59 Pla ying/searching at various speeds Additio nal Op er atio ns Tip • Adjust t he pi cture u sing the PR OGRA M +/– but tons on the VC R if: – Str eak s appear while p laying in slow motion. – Bands ap pe a r at the top or bo tto m while pa usin g.
60 Setting the recording duration time Setting the recording duration ti me After you ha ve start ed recordi ng in the norma l way , you can ha ve t he VCR stop recording automatically af ter a specified dur ation. Before you start … • Refer to “Index to parts and con t rol s” for button locations.
61 Synchronized Recording (not av ailable on SL V -SE640N and SE440K ) Additio nal Op er atio ns Sync hron ized Rec or ding (not a v ailabl e on SL V -SE640N and SE440K) Y o u can set the VCR to autom.
62 Synchronized Recording (not available on SL V -SE64 0N and SE 440K) T o c ancel the Sync hronized Recor ding function Press SYNCHRO REC on the VCR. The SYNCHR O REC ind icato r disappear s. T o stop recording Pre ss x (stop) while recording. Notes • This functio n may not work with some types o f satellite tun ers.
63 Checking/changing/cancelling timer settings Additio nal Op er atio ns Chec king/c hangin g/cancel ling time r settings Before you start … • T urn o n your TV and se t i t to th e video ch annel . • Refer to “I n dex to parts and cont rol s” for button locatio ns.
64 Checking/changing/cancelling timer settings When th e timer se ttings overlap The programme t hat starts f irst has prio rity and the second pro gramme starts recording on ly after the f irst programme has finish ed. If the program mes start at the same time, the program me listed fir st in the menu has prio r ity .
65 Recording stereo and bilingual programmes (not av ai lable on SL V -S E440K) Additio nal Op er atio ns Recor ding stereo and bi lingu al pr ogrammes (not a v ailable on SL V -SE440K) In the ZWEIT ON (Germa n stereo) system This VCR automatically recei ves an d records stereo an d bilingual programmes based on the ZWEIT ON system.
66 Recording stereo and bilingual progr ammes (not av ailab le on SL V -SE440K) In the NICAM system This VCR receiv es and records stereo and bilingual programmes based on the NICAM system (NICAM appears on th e TV screen). When a stereo or bilingual programme is recei ved, th e STEREO indicator ap pears in the displa y windo w .
67 Recording stereo and bilingual programmes (not av ai lable on SL V -S E440K) Additio nal Op er atio ns How sound i s recor ded on a vi deo tape The VCR records sound onto tw o sep arate tracks. Hi-f i audio is recorded onto the main track along with the pictur e.
68 Searching using the index function (not availab le on SL V -SE440K) Sear chin g using t he inde x function (not av ailable on SL V -SE440K) The VCR automatically marks the tape with an index signal at the point wher e each recording be gins. Use these signals as references to find a specif ic recording.
69 Searching using t he inde x function (not avai lable on SL V -SE440K) Additio nal Op er atio ns Notes • No inde x si gn al will be added when reco rdi ng starts from recording paus e. Howe ver , an in dex signal will be mark ed if yo u change the programm e position during re cordi ng paus e.
70 Adjusting the picture Adjusting the pi cture Adjusting t he tracki ng Although the VCR autom atically adjusts th e tracking when playing a t ape, dist ortion may occur if the recording is in poor condition . In this case, manually adjus t the tracking.
71 Reducing the VCR’ s power consumption Additio nal Op er atio ns Reducin g the VCR’ s po wer consumptio n Y o u can turn off th e indicators in the di sp lay wi ndo w when the VCR is off (standby mode) to reduce the VCR’ s power consumpti on. T o turn on the indicators in the display window Set POWER SA VE to OFF in step 3.
72 Changing menu options Changing men u opti ons Menu choices Initial settings are indicated in bold print. USER SET 1 Press MENU, then select USER SET or EASY OPERA TION and press OK. 2 Pre ss M / m to select the option. 3 Pre ss , to ch ange the setting, then pr ess OK.
73 Changing menu options Additio nal Op er atio ns EASY OPE RA TION * 1 not a vailabl e on SL V - SE440K * 2 not a vailabl e on SL V -SE640N a nd SE44 0K NICAM* 1 • ON to rec ord NIC AM broadca sts on the hi -fi audi o track. • OFF to reco rd stan d ard so un d on the hi- f i audio t rac k .
74 Connecting to a VCR or st ereo system Editing Connecting to a VCR or stereo system How to connect to r ecord on this VCR Connect th e line output s of the oth er VCR to th e input conn ector of this VCR. Refer to the e xamples A thro ugh C and choo se the connection that best su its your VCR.
75 Connecting to a VCR or stereo system Editing Example C How to connect to a stereo system (SL V -SE840N onl y) Connect the t LINE-2 L o R jacks on this VCR to th e audio output jacks on the stereo s ystem, using an au dio cable (not s upplied). Notes • Make sure you connect the p lugs to jac ks of t he same colour.
76 Basic editing Basic edit in g When recor ding on t his VCR Before you start editing • T urn on your TV an d set it to the vide o channel . • Press INPUT SE LECT to displa y the connect ed line in t he di splay window . • Press SP/LP to selec t the tape speed, SP or LP .
77 Audio dubbing (SL V -SE840N only) Editing A u di o dubb in g (SL V -SE840N only) This feature lets you record o ver the no rmal audio track. The mo naural sound pre viously recorded is re placed while the original hi-f i sound remains unch anged. Use this feature to add commentary to a tape that you hav e recorded with a camcor der .
78 T roubleshooting Additional Inf ormation T ro ubl eshooti ng If you h av e an y questi ons or p roblems not cov ered belo w , please consult your nearest Sony service facility . Symptom Remed y Po w e r The ? / 1 (on/ standby) switch does not func tion.
79 T roubleshooting Additiona l Inform ation Pl ay b ack The pictu r e has n o soun d. • The ta pe is defe ctive. • If you made A/V con nections, ch eck the aud io cable connec tion. The s ound f rom a ta pe recorded with the VCR i s not in ster eo or t he STEREO indi cator in the displa y window is flashing.
80 T roubleshooting Timer recordi ng The SH OWVIEW m enu or the T IMER PR OGRAM MING menu does not ap pear . • Check that TIMER METHOD in the EASY OPERA TION menu is set corre ctly (see pag e 73). The VP S/PDC func tion does not op erate properl y .
81 T roubleshooting Additiona l Inform ation Oth ers A tape cannot be inse rt ed. • Ch eck that a ta pe i s not alrea dy in the tape co mpa rtment. The remote com man der does not f uncti on. • M ake sure you are poin t ing the remote co mmande r at the remote s ensor on the VC R.
82 Specifications Specification s System Ch a nn el c ove r ag e P AL (B/G, D/K) VHF E2–E 12, R1–R 12 UHF E 21–E69, R21–R69 CA TV S1–S41, S01– S0 5 RF o utput signa l UHF chann els 21–69 Aerial out 75-ohm asymme trical aeria l socket Ta p e s p e e d SP: P AL/MESECAM 23.
83 Specifications Additiona l Inform ation Dimensi o ns inclu ding pr oj ectin g parts and controls (w/h/d) Approx. 3 60 × 95 × 25 5 mm (SL V -SE440K) Approx. 4 30 × 96 × 25 5 mm (SL V -SE8 40N, SE740N, SX740N an d SE64 0N) Mass Appro x. 2.8 kg (SL V -SE4 40K) Appro x.
84 Inde x Inde x A Adju stin g picture 70 tracking 70 Aerial hook up 16 Audio d ubbing 77 Audi o moni tor 66 Audio t rack 67 Auto Cloc k Set 22 Auto S e t Up 20 C Canal Pl us 36 Chan gi ng th e progra.
.
.
.
AC68-02164N Sony Co rporation Printed in Indo nesia Quick Start Guide 1 Connecting the VCR 1 ... Connect the aerial to of the VCR. 2 ... Connect and the a erial input of yo ur TV using the supplied aerial cable.
Ein wichtiger Punkt beim Kauf des Geräts Sony SLV-SE440K (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony SLV-SE440K noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony SLV-SE440K - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony SLV-SE440K reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony SLV-SE440K erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony SLV-SE440K besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony SLV-SE440K verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony SLV-SE440K. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony SLV-SE440K gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
