Benutzeranleitung / Produktwartung SLV-ED60MJ des Produzenten Sony
Zur Seite of 48
Video Cassette Recor der ©1999 by Sony Corporation SL V -ED60ME/MJ/PS/SG Operating Instructions G 3-865-384- 13 (1) PAL NTSC.
Introduction 2 W ARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only . The mains lead must only be changed at a qualified service shop.
3 Introduction T able of contents Getting Started Getting Started 4 Step 1: Unpacking 5 Step 2: Setting up the r emote commander 6 Step 3: Connecting the VCR 8 Step 4: T uning your TV to the VCR 10 St.
4 Getting Started • Remote commander • R6 (size AA) batteries Getting Started • Aerial cable • Plug adaptor (SL V -ED60ME/MJ only) Step 1 Unpacking Check that you have received the following items with the VCR: Checking your model name The instructions in this manual are for the 4 models: SL V -ED60ME, ED60MJ, ED60PS and ED60SG.
5 Getting Started Getting Started Step 2 Setting up the r emote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position.
6 Getting Started IN OUT AERIAL OUT IN AERIAL Step 3 AERIAL IN AERIAL IN Mains lead to mains AERIAL OUT Aerial cable (supplied) : Signal flow LINE-1 OUT LINE IN Audio/video cable (not supplied) 1 Disconnect the aerial cable fr om your TV and connect it to AERIAL IN on the r ear panel of the VCR.
7 Getting Started Getting Started T o a ster eo system Y ou can improve sound quality by connecting a stereo system as shown on the right. Note • T o listen to playback sounds in stereo, you must use either of the connections above. T o a satellite tuner Y ou can recor d programmes from other equipment such as a satellite tuner .
8 Getting Started SP APC RF CHANNEL RF CHANNEL Step 4 T uning your TV to the VCR If you have connected your VCR to the TV using the audio/video cable, skip this step. PROGRAM +/– RF CHANNEL 1/u ON/ST ANDBY If your TV system is Select B/G G II D/K K 1 Pr ess 1/u ON/ST ANDBY to turn on the VCR.
9 Getting Started Getting Started SONY VIDEO CASSETTE RECORDER 5 T une the TV to the same channel as that shown in the display window so that the picture on the right appears on the TV screen. Refer to your TV manual for tuning instructions. If the pictur e does not appear clearly , see “T o obtain a clear pictur e from the VCR” below .
10 Getting Started LANGUAGE / ENGLISH • : : [ ] [ OK ] PLAY OK MENU PLAY OK Selecting a language Y ou can change the on-screen display language fr om English to Arabic. Before you start… • T urn on your TV and set it to the video channel. Step 5 1 Pr ess ON/STANDBY to turn on the VCR.
11 Getting Started Getting Started SP APC Step 6 1 Pr ess ONE TOUCH TUNING on the VCR for more than 3 seconds. The VCR starts the channel pr esetting. The W AIT indicator goes off when all r eceivable channels are preset. T o check if the channels ar e preset correctly Set the TV to the video channel and press PROGRAM +/– on the VCR.
12 Getting Started TUNER PRESET PROG 1 NORMAL / CATV SYSTEM AUTO PRESET CHANNEL SET AFT FINE TUNING NORM • CATV B / G • D / K I OFF SELECT SET : [] : [ ] ON • 1 MENU PLAY OK PLAY OK TUNER PRESET.
13 Getting Started Getting Started PLAY OK 4 Pr ess > / . to move the cursor ( ” ) to AUT O PRESET , then press OK. All receivable channels are pr eset in numerical sequence. When no more receivable channels can be found, pr esetting stops and the picture from the lowest number ed channel is displayed on the TV scr een.
14 Getting Started Presetting channels manually 1 Pr ess MENU, then press > / . to move the cursor ( ” ) to TUNER PRESET and pr ess OK. 2 Pr ess > / . / ? / / to move the cursor ( ” ) to NORMAL/CA TV , then select NORM. T o preset CA TV channels, select CA TV .
15 Getting Started Getting Started Selected pr ogramme position 4 Pr ess PROG +/– to select the pr ogramme position. 5 Pr ess / r epeatedly until the channel you want is displayed.
16 Getting Started Disabling unwanted pr ogramme positions After tuning the TV channels, you can disable unused pr ogramme positions. The disabled positions will be skipped later when you pr ess the PROG +/– buttons. 1 In step 5 on page 15, press pr ogramme number button “ 0” twice to display the number “ 0” beside CHANNEL SET .
17 Getting Started Getting Started CLOCK SET 2. 1. 1 9 9 0 : 0 0 52 9 SA SELECT SET END : [ OK ] : [] : [ ] CLOCK SET 2 . 1 . 1 9 9 9 MO 0 : 0 0 5 SELECT SET END : [ OK ] : [] : [ ] CLOCK SET 1 .
18 Getting Started CLOCK SET 2 . 1 . 1 9 9 9 SA 52 5 : 3 0 1 SELECT SET END : [ OK ] : [] : [ ] PLAY OK PLAY OK 4 Set the year , hour and minutes in sequence, using / to flash the item to be set, and > / . to select the digits. 5 Pr ess OK to start the clock.
Basic Operations 19 Basic Operations 123 456 789 0 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed.
Basic Operations 20 PLAY OK To Stop play Pause play Resume play after pause Fast-forward the tape Rewind the tape Eject the tape T o set the colour system If streaks appear during playback, pr ess COLOR SYSTEM on the VCR to conform to the system that the tape was r ecor ded in.
Basic Operations 21 Basic Operations SP APC T o use the time counter At the point on the tape that you want to find later , pr ess COUNTER RESET . The counter in the display window r esets to “0:00:00.” Search for the point afterwar ds by r eferring to the counter .
Basic Operations 22 T urning on the VCR and TV , and starting playback automatically (T rinitr on TV Synchro Play) Y ou can only use this function if your TV is made by Sony (T rinitr on TV). How to connect to use this function Connect the VCR and TV with the audio/video cable (see “T o a TV that has audio/video input jacks” on page 6).
Basic Operations 23 Basic Operations SP APC 123 456 789 0 Recording TV pr ogrammes 1 T urn on your TV and set it to the video channel. 2 Insert a tape with its safety tab in place. 3 Pr ess PROG +/– to select the programme position you want to recor d.
Basic Operations 24 S E :: 2 2 – 00 0 LP APC SP APC SP/LP (SP/EP) Recording TV programmes (continued) 4 Press SP/LP (SP/EP) to select the tape speed, SP or LP . LP (Long Play) provides recording time twice as long as SP (Standard Play), however , SP pr oduces better pictur e and audio quality .
Basic Operations 25 Basic Operations T o r ecord NTSC colour system programmes NTSC colour signals can be r ecor ded on this VCR fr om the LINE-1 IN, LINE-2 IN and LINE-3 IN (SA T IN) jacks only . T o select the line input, pr ess INPUT SELECT or PROG +/– so that “L1”, “L2” or “L3” appears in the display window .
Basic Operations 26 SP STOP APC Recor ding TV programmes using the easy timer Y ou can recor d one programme on the same day (within 24 hours) with the easy timer . If the VCR clock has not been set, you can set the clock befor e setting the timer r ecording.
Basic Operations 27 Basic Operations continued 4 Set the r ecor ding stop time in the same way as in step 2, then press the EASY TIMER knob. A programme number flashes. 5 T urn the EASY TIMER knob clockwise or counterclockwise to select the programme you want to r ecord.
Basic Operations 28 1 • When “–:– –” is displayed in the display window , pr ess EASY TIMER. • T o change the clock setting, press the EASY TIMER knob on the VCR for mor e than thr ee seconds. The CLOCK indicator and the curr ent clock setting appear in the display window .
Basic Operations 29 Basic Operations SP APC START 3 Pr ess the EASY TIMER knob to confirm the clock setting. The VCR enters the timer r ecording setting mode. T o continue the easy timer setting, go to step 2 in “Setting the easy timer” on page 26.
Basic Operations 30 T o stop r ecording T o stop the VCR while recor ding, press p STOP . T o check or change the timer setting Pr ess EASY TIMER knob r epeatedly until the setting you want to check or change flashes. Then r e-enter the new setting, if necessary .
Basic Operations 31 Basic Operations TIMER SET / CHECK SA 25 . 1 DATE START STOP PROG 2. 5 12 SA – : –– – : –– –– SP –. – – – : –– – : –– –– – –. – – – : –– – : –– –– – –. – – – : –– – : –– –– – –.
Basic Operations 32 • ON/ STANDBY PLAY OK PLAY OK T o recor d the same pr ogramme every day or the same day every week, press . while the date is flashing.
Additional Operations 33 Playing/sear ching at various speeds Additional Operations Playback options V iew the picture during fast- forward or rewind Play at high speed Play at twice the normal speed Play in slow motion Play frame by frame Rewind and start play T o r esume normal playback Pr ess · PLA Y .
Additional Operations 34 Recor ding TV pr ogrammes using the quick timer After starting r ecor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. QUICK TIMER 1 While recor ding, press QUICK TIMER once.
Additional Operations 35 TIMER SET / CHECK SA DATE START STOP PROG . 6 1 7: 0 0 8:0 0 6 SP . 8 1 1: 0 0 0:0 0 5 0 MO – 0 :1 2 3 :0 0 2 2 7 3: 0 0 0:0 0 L –. – – –: – – –:– – – – – –. – – –: – – –:– – – – – –.
Additional Operations 36 3 Press > / . to select the setting you want to change or cancel: • T o change the setting, press ? / / to flash the item you want to change, and press > / . to re-set it. Then, pr ess / repeatedly until the cursor ( ” ) appears at the beginning of the line.
Additional Operations 37 Hi-fi audio track (main track) Stereo sound (left/ right channels) Normal audio track (monaural) Main (left channel) Sub (right channel) Recording ster eo and bilingual pr ogrammes The VCR can r ecor d ster eo and bilingual pr ogrammes only through the line input.
Additional Operations 38 About Adaptive Pictur e Control (APC) Adaptive Pictur e Control (APC) automatically impr oves recording and playback quality by adjusting the VCR to the condition of the video heads and tape.
Additional Operations 39 SET UP MENU AUDIO MIX APC PAL / MESECAM PAL AUTO MESECAM SELECT SET • ON OFF • • ON OFF : [] : [ ] Menu option AUDIO MIX APC P AL/MESECAM Changing menu options 1 Press MENU, then select SET UP MENU. 2 Press > / . to select the option to change, then press ? / / to change the setting.
Additional Operations 40 Editing with another VCR or stereo system How to connect to r ecord on this VCR How to connect to a ster eo system Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the ster eo system, using the RK-C510KS audio cable (not supplied).
Additional Operations 41 Operation (when r ecording on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT or PROG +/– to display “L1”, “L2” or “L3” in the display window .
42 Additional Information T roubleshooting Symptom The ON/ST ANDBY switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “–:– –” lights in the display window . The playback picture does not appear on the TV screen.
43 Additional Information Recording Symptom No TV programmes appear on the TV screen. TV r eception is poor . The recor ded pictur e has no colour or unusual colours. The tape starts playing as soon as it is inserted. The tape is ejected when you press r REC.
44 Additional Information Specifications System Colour system P AL, MESECAM, NTSC 3.58, NTSC 4.43 TV system B/G, D/K, I Channel coverage B/G: VHF E2 to E12/UHF E21 to E69/ CA TV S01 to S05, S1 to S41 .
45 Additional Information !¶ !§ !∞ !¢ 12 6 3 4 9 8 7 !º !¡ !™ !£ 5 Index to parts and contr ols Front panel Refer to the pages indicated in parentheses ( ) for details.
46 Additional Information STEREO SP EP LP STOP APC START CLOCK NTSC PAL Index to parts and controls (continued) Display window 8 T racking indicator (38) 9 Colour system indicator (20) 0 T ime.
47 Additional Information 123 456 789 0 Remote commander 1 TV / VIDEO remote contr ol switch (5) 2 6 EJECT button (20) 3 DISPLA Y button (24) 4 TRINITRON TV SYNCHRO PLA Y button (22) 5 TV/VIDEO button.
A, B Accessories supplied 4 Adjusting pictur e 16, 33, 38 tracking 33, 38 Aerial hookup 6 AFT (Auto Fine T uning) 16 APC (Adaptive Pictur e Control) 38 Audio track 37 A V (audio/video) connection 6 C .
Ein wichtiger Punkt beim Kauf des Geräts Sony SLV-ED60MJ (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony SLV-ED60MJ noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony SLV-ED60MJ - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony SLV-ED60MJ reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony SLV-ED60MJ erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony SLV-ED60MJ besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony SLV-ED60MJ verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony SLV-ED60MJ. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony SLV-ED60MJ gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
