Benutzeranleitung / Produktwartung PCWA-A200 des Produzenten Sony
Zur Seite of 32
Operating Instructions Wireless LAN Access Point PCWA-A100/A200 4-647-079- 14 (1) © 2000 Sony Corporation.
2 Owner’s Record The model and serial numbers are located on the bottom of the product. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. PCWA-A100, PCWA-A200 Serial No.
3 • Use only the supplied AC adapter with your Sony Wireless LAN Access Point. To disconnect your Wireless LAN Access Point from the power supply, unplug the AC adapter. • Make sure the power outlet is easily accessible. FCC Part 68 (PCWA-A100 only) This equipment complies with Part 68 of the FCC rules.
4 NOTICE : The REN assigned to each terminal device is used to calculate the maximum number of terminals allowed on a telephone interface. An interface may have any combination of devices, but the sum of the REN for all devices cannot exceed 5.
5 Sony, VAIO, and the VAIO logo are trademarks of Sony Corporation. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United States and other countries. MMX and Pentium are registered trademarks of Intel Corporation.
6 Overview What you can do with your Wireless LAN Access Point The Wireless LAN Access Point PCWA-A100/A200 (hereinafter referred to as the Access Point) is designed for building a wireless LAN (Local Area Network) environment.
7 2 Connecting to an ISDN router (see page 15) 3 Connecting to a cable modem (see page 16) 4 Connecting to a DSL modem (see page 17) ISDN Router Internet Internet Service Provider To 10BASE-T connecto.
8 5 Using as the hub of your local network (see page 18) HUB To 10BASE-T connector.
9 System requirements • A computer satisfying the following requirements. CPU: MMX ® Pentium ® 233 MHz and above RAM: 64 MB and above With Windows 98 Second Edition, Windows Me, or Windows 2000: 6.
10 About supplied manuals Please read the Operating Instructions and Help information for the Access Point (PCWA-A100/A200) and Wireless LAN PC Card (PCWA- C100) in the following order. 1 Wireless LAN Access Point Operating Instructions (this document) Explains how to connect and install the Access Point.
11 Your Access Point comes with the following items. • Wireless LAN Access Point • Unit stand • AC power adapter • Telephone cable • Telephone jack splitter (PCWA-A100 only) (PCWA-A100 only).
12 * Not included with the PCWA-A200. 1 POWER indicator Lights while power is supplied. 2 WIRELESS indicator Lights when data is being exchanged on a wireless LAN. 3 ETHERNET indicator Lights while data exchange is in progress through the 10BASE-T connector.
13 Connections Connecting the Access Point to the Internet Connection to the Internet varies depending on your Internet environment. If you are using the Access Point for your local network only, and you do not need to connect it the Internet, proceed to page 18 and see “ To use the Access Point for your local network only.
14 Internet Internet Service Provider HUB To 10BASE-T connector To LINE/ PHONE connector LINE/ PHONE DC IN 5V To LINE/PHONE connector Telephone jack splitter (supplied) Telephone cable (supplied) To the telephone line outlet 1 Connect the telephone cable to the LINE/PHONE connector.
15 To connect the Access Point to the ISDN router Connecting the Access Point to an ISDN router provides multiple computers containing a Wireless LAN PC Card with Internet access via the Access Point. No connection is required between the computer(s) and router.
16 To connect the Access Point to the cable modem Connecting the Access Point to a cable modem provides multiple computers containing the Wireless LAN PC Card with Internet access via the Access Point. 1 Connect the cable modem and the Access Point with an Ethernet cable.
17 To connect the Access Point to a DSL modem Connecting the Access Point to a DSL modem provides Internet access to computers that are using a Wireless LAN PC Card. 1 Connect the DSL modem and the Access Point with an Ethernet cable. 2 Connect the AC power adapter (page 19).
18 To use the Access Point for your local network only The Access Point may be used simply as a hub for wireless computers in your local network without Internet access. Use of the Access Point in this manner enables file sharing among client computers.
19 Connecting the Access Point to a power source Use the supplied AC power adapter to connect to a power outlet. To power on/off the Access Point The Access Point is not equipped with a power switch. To power on/off the Access Point, plug/unplug the AC power adapter.
20 Attaching the unit stand The unit stand allows you to place your Access Point in an upright position. When the unit stand is attached, cables are routed through the recessed groove. Before attaching the unit stand Make sure to write down the six-digit Access Point ID on the label attached on the bottom surface of the Access Point.
21 Setting up After you connect and install your Access Point, see the manual, Wireless LAN PC Card Operating Instructions. The manual provides instructions on how to insert the PC card into the computer, install and set up its software, and install the software needed to set up the Access Point.
22 If you forget the Access Point settings If you forget the Access Point settings, so that you can no longer connect to the Access Point, use the following procedure to make the settings again. Note When a static IP address is set to the Access Point, you cannot change the settings as in the following procedure.
23 The software reset will automatically set the password to its factory default setting of “ public. ” (You can now change the password to anything other than “ public ” .) 4 Click SCAN. Selection of communication mode and setup of common parameters dialog box appears.
24 Pr ecautions Additional information AC power adapter Be sure to use the supplied AC power adapter. Other AC power adapters may cause a failure to the Access Point.
25 Specifications Communication distance Approx. 100 m (approx. 330 feet) with no obstacles (The communicable distance depends on the environment.) Maximum number of units connected 49 units (number of clients) (Recommended number of clients is 16 or less) Protocol support TCP/IP, NetBEUI Standard IEEE802.
26 This section describes how to get help and support from Sony, as well as troubleshooting tips for your Access Point. About Sony’s Support Options Sony provides several support options for your Access Point.
27 Glossary Client A computer connected to a LAN (Local Area Network). Also called a client computer. ISDN ISDN (Integrated Services Digital Network) is a set of standards for digital transmission over ordinary telephone copper wire and other media.
28 T roubleshooting If you experience any of the following difficulties while using the Access Point, this troubleshooting guide may help you remedy the problem. Should a problem persist, consult the Sony Customer Information Service Center. On the Access Point The Access Point is not operating properly.
29 Sony Wireless LAN Access Point/ Wireless LAN PC Card Warranty The limited warranty on your hardware covers parts and labor against defects in material or workmanship for a period of three months from the original date of purchase.
30 unless expressly provided for in any enclosed software limited warranty. Please refer to the End User License Agreements included with the Product for your rights and obligations with respect to the software. This Limited Warranty is non- transferable.
31 TIME. FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER LEGAL THEORY RELATED TO THIS PRODUCT.
Printed in Japan ❒ The Sony e-mail support service answers your questions by electronic mail. Just send your question in an e-mail message and a customer service representative will reply. To send a question to Sony e-mail support, fill out the e- mail form at http://www.
Ein wichtiger Punkt beim Kauf des Geräts Sony PCWA-A200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony PCWA-A200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony PCWA-A200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony PCWA-A200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony PCWA-A200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony PCWA-A200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony PCWA-A200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony PCWA-A200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony PCWA-A200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
