Benutzeranleitung / Produktwartung MHC-GRX2 des Produzenten Sony
Zur Seite of 32
ES F P Mini Hi-Fi Component System 3-862-423- 11 (1) Operating Instructions Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 ES F P T able of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 6 Step 3: Presetting radio stations .......... 7 Connecting outdoor antennas .............. 8 Basic Operations Playing a CD .
4 1 Connect the speakers. Connect the speaker cords to the SPEAKER jacks of the same color. Keep the speaker cords away from the antennas to prevent noise. Step 1: Hooking up the system Do the following procedure 1 to 4 to hook up your system using the supplied cords and accessories.
5 FM 75 OHM AM AM FM 75 OHM Inserting two size AAA (R03) batteries into the remote Tip With normal use, the batteries should last for about six months.
6 1 3,5 2,4 DISPLA Y/DEMO 3 Press ENTER/NEXT. The minute indication flashes. 4 Press = or + repeatedly to set the minute. 5 Press ENTER/NEXT. The clock starts working. To change the preset time You can also change the time while the power is on. 1 Press CLOCK/TIMER SET.
7 ALL DISCS TUNED STEREO VOLUME MHz Step 3: Pr esetting radio stations You can preset up to 30 stations, 20 for FM and 10 for AM. 1 Press TUNER/BAND repeatedly until the band you want appears in the display.
8 AM FM 75 OHM + R – – L + + R – – L + FM 75 OHM AM + R – – L + AM FM 75 OHM + R – – L + FM 75 OHM AM AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected.
Basic Operations 9 ALL DISCS VOLUME Playing a CD — Normal play 1 Press 6 and place up to two CDs on the disc tray. If a disc is not placed properly, it will not be recognized. To insert a third disc, press DISC SKIP to rotate the disc tray. 2 Press one of the DISC 1 – 3 buttons.
10 To Do this Stop play Press p . Pause Press CD (P (or P on the remote). Press again to resume play. Go to the next During play or pause, press track or go back + (to go forward) or = to the start of (to go back). the current track Find a point in Press and hold down ) or a track 0 during play and release it at the desired point.
Basic Operations 11 You can use a TYPE I (normal) tape. 1 Press p 6 and insert a blank tape into deck A. Recording a CD With the side you want to record on facing forward 2 Press 6 and place a CD. Then press again to close the disc tray. If the disc number you want to record is not displayed, press DISC SKIP repeatedly so that it appears.
12 Listening to the r adio –– Preset Tuning Preset radio stations in the tuner’s memory first (see “Step 3: Presetting radio stations”). 1 Press TUNER/BAND repeatedly until the band you want appears in the display.
Basic Operations 13 3 Press p 6 and insert a blank tape into deck A. 4 Press r on deck A. Recording starts. To stop recording Press p 6 on deck A. To pause recording Press P on deck A. Tips • To record non-preset stations, use 0 and ) in step 2 to tune in the desired station.
14 1 Press p 6 and insert a recorded tape in deck A or B. 2 Press TAPE. “TAPE” appears in the display. 3 Press ( on deck A or B. The tape starts playing. With the side you want to play facing forward To Do this Stop play Press p 6 . Pause Press P .
Basic Operations 15 2 Press TAPE. “TAPE” appears in the display. Recording fr om a tape 3 Press P and then r on deck A. Deck A stands by for recording. 4 Press ( on deck B. The tape starts dubbing. To stop recording Press p 6 on deck A and B. To pause recording Press P on deck A.
16 / Press DISPLAY/DEMO during playback. Each time you press the button during normal playback, the display changes as follows: Playing the CD tr acks r epeatedly –– Repeat Play This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play.
17 To cancel Repeat Play Press REPEAT so that “REPEAT” or “REPEAT 1” disappears from the display. Playing the CD tracks in random order –– Shuffle Play You can play all the tracks on one CD or all the CDs in random order. 1 Place CDs on the disc tray.
18 Pr ogramming the CD tr acks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. To cancel Shuffle Play Press PLAY MODE repeatedly until “SHUFFLE” or “PROGRAM” disappears from the display.
19 1 Place CDs on the disc tray. 2 Press CD (P (or ( on the remote) and then p . 3 Press PLAY MODE repeatedly until “PROGRAM” appears in the display. 4 Press one of the DISC 1 – 3 buttons or DISC SKIP repeatedly to select a CD. 5 Press = or + repeatedly until the desired track appears in the display.
20 To Press Check the CHECK on the remote program repeatedly. After the last track, “CHECK END” appears. Clear a track from CLEAR on the remote in the end stop mode. Clear a specific CHECK on the remote track repeatedly until the number of the track to be erased appears, then press CLEAR.
21 Recording CDs by specifying the track or der — Program Edit You can record tracks from all the CDs in the order you want. When programming, make sure the playing times for each side do not exceed the length of one side of the tape. The Tape Deck 1 Follow steps 1 to 7 in “Programming the CD tracks” (see page 19).
22 Selecting tape length automatically —Tape Select Edit You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing over 20 tracks. 1 Place a CD on the disc tray. If the disc number you want to record is not displayed, press DISC SKIP repeatedly so that it appears.
23 Selecting the audio emphasis The audio emphasis menu lets you select the sound characteristic according to the sound you are listening to. / Press FILE SELECT repeatedly until the effect you desire (ROCK, POP or DANCE) appears in the display. To cancel the effect Press FILE SELECT repeatedly until “FLAT” appears in the display.
24 W aking up to music — Wake-up Timer You can wake up to music at a preset time every day. Make sure you have set the clock (see “Step 2: Setting the time”). The 24-hour system model is used for illustration purpose. F alling asleep to music — Sleep Timer You can let the system turn off at the preset time, so you can sleep to the CD.
25 3 Press CLOCK/TIMER SET. “SET DAILY” appears. 4 Press ENTER/NEXT. “ON” appears and the hour digits flash in the display. 5 Set the time to start playback. Press = or + repeatedly to set the hour, then press ENTER/NEXT. The minute indication starts flashing.
26 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
27 T r oubleshooting If you run into any problem using this stereo system, use the following check list. First, check that the power cord is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
28 Troubleshooting (continued) There is severe hum or noise. • A TV or VCR is placed too close to the stereo system. Move the stereo system away from the TV or VCR. “0:00” (or “12:00AM”) flashes in the display. • A power failure occurred. Set the clock and timer settings again.
29 Tape Deck The tape does not record. • No tape in the cassette holder. • The tab has been removed from the cassette (see “To save a tape permanently” on page 26). • The tape has reeled to the end. The tape does not record nor play or there is a decrease in sound level.
30 CD player section System Compact disc and digital audio system Laser Semiconductor laser ( λ = 780 nm) Emission duration: continuous Laser output Max. 44.6 µ W* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture.
31 General Power requirements European model: 230 V AC, 50/60 Hz Mexican model: 120 V AC, 50/60 Hz Australian and South African models: 220 – 240 V AC, 50/60 Hz Other models: 120 V AC, 60 Hz Power consumption 80 watts Dimensions (w/h/d) incl. projecting parts and controls Approx.
32 Sony Corporation Printed in China Index O One Touch Play 10, 12 P, Q Playing a CD 9 a preset radio station 12 a tape 14 tracks in random order (Shuffle Play) 17 tracks in the desired order (Program.
Ein wichtiger Punkt beim Kauf des Geräts Sony MHC-GRX2 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony MHC-GRX2 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony MHC-GRX2 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony MHC-GRX2 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony MHC-GRX2 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony MHC-GRX2 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony MHC-GRX2 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony MHC-GRX2. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony MHC-GRX2 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
