Benutzeranleitung / Produktwartung MHC-G202/C20 des Produzenten Sony
Zur Seite of 28
MHC-G202/C20. 3-859-548-12. EN Compact-Hi-Fi Ster eo System 3-859-548- 12 (1) ©1997 by Sony Corporation MHC-G202/MHC-C20 F Operating Instructions f Owner’s Record The model and serial numbers are located on the rear panel. Record the serial number in the space provided below.
MHC-G202/C20. 3-859-548-12. EN 2 WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 MHC-G202/C20. 3-859-548-12. EN T able of Contents Getting Started Step 1: Hooking up the system ............ 4 Step 2: Setting the time ......................... 5 Step 3: Presetting radio stations .......... 6 Connecting optional outdoor antennas .
4 MHC-G202/C20. 3-859-548-12. EN Getting Started Step 1: Hooking up the system Do the following procedures 1 to 4 to hook up your system using the supplied cords and accessories. To complete the setup, do steps 2 and 3 also. 1 Connect the speakers. Connect the speaker cords to the SPEAKER jacks of the same color .
MHC-G202/C20. 3-859-548-12. EN 5 Step 2: Setting the time You must set the time beforehand to use the timer function. 1 Press CLOCK SET for a few seconds, when the power is off. “– – : – –” appears. 2 Press )± or 0 and set the hour. “A” indicates AM and “P” indicates PM.
6 MHC-G202/C20. 3-859-548-12. EN Step 3: Presetting radio stations You can preset up to 30 stations. 1 Press TUNER/BAND repeatedly until the band you want appears in the display. Each time you press the button, the band changes as follows: FM ˜ AM 2 Press )± or 0 for a second.
MHC-G202/C20. 3-859-548-12. EN 7 4 Press PRESET + or – and select the preset number you want. 5 Press MEMORY. The station is stored. 6 Repeat steps 1 to 5 to store other stations. To tune in a station with a weak signal Press )± or 0 repeatedly to tune in the station.
8 MHC-G202/C20. 3-859-548-12. EN AM antenna Connect a 6- to 15- meter (20- to 50- feet) insulated wire to the AM antenna terminal. Leave the supplied AM loop antenna connected. Important Ground the external antenna from y terminal against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.
MHC-G202/C20. 3-859-548-12. EN Basic Operations 9 Basic Operations Playing a CD You can play up to three CDs continuously. 1 Press § and place a CD on the disc tray. To place the third disc, press DISC SKIP to rotate the disc tray. 2 Press ·P . The disc tray closes and play starts from the CD loaded on the tray whose button is lit green.
MHC-G202/C20. 3-859-548-12. EN 10 Recording a CD Use a TYPE I (normal) tape. 1 Press p6 and insert a blank tape into deck A. 2 Press § and insert a CD on the disc tray. 3 Press § . The disc tray closes. 4 Press one of the DISC 1 – 3 buttons to select a CD.
MHC-G202/C20. 3-859-548-12. EN Basic Operations 11 Listening to the radio –– Preset Tuning Firstly preset radio stations in the tuner’s memory (see page 6).
MHC-G202/C20. 3-859-548-12. EN 12 Recording fr om the radio You can record the radio program on a tape by calling up a preset station. Use a TYPE I (normal) tape. 1 Press TUNER/BAND to select the band you want. 2 Press PRESET + or – to tune in a preset station.
MHC-G202/C20. 3-859-548-12. EN Basic Operations 13 To Stop play Pause Fast-forward Rewind Remove the cassette Adjust the volume Do this Press p6 . Press P . Press again to resume play. Press p6 then press ) . Press 0 . Press p6 . Turn VOLUME (Press VOL + or – on the remote).
MHC-G202/C20. 3-859-548-12. EN 14 Recording from a tape — Dubbing Use a TYPE I (normal) tape. 1 Press p6 and insert a blank tape in deck A and a recorded tape in deck B. 2 Press TAPE. “TAPE” appears in the display. 3 Press P on deck A. 4 Press r on deck A.
MHC-G202/C20. 3-859-548-12. EN 15 The CD player Playing the CD tracks repeatedly –– Repeat Play This function lets you repeat a single CD or all CDs in normal play, Shuffle Play and Program Play. 1 Press CD and place a CD on the disc tray. 2 Press REPEAT.
MHC-G202/C20. 3-859-548-12. EN 16 Programming the CD tracks –– Program Play You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. 1 Press CD and place a CD on the disc tray. 2 Press PROGRAM. “PROGRAM” appears.
MHC-G202/C20. 3-859-548-12. EN 17 4 Press )± or 0 to select a track. 5 Press PROGRAM. The track is programmed. The last programmed track appears. 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 if you select a track from the same disc.
MHC-G202/C20. 3-859-548-12. EN 18 4 Press ·P . CD play starts. To stop recording Press p6 on deck A and p on the CD player. To cancel Program Edit Press PROGRAM so that “PROGRAM” disappears. The Tape Deck Recording a CD by specifying track order –– Program Edit You can record tracks from all the CDs in the order you want.
MHC-G202/C20. 3-859-548-12. EN 19 Sound Adjustment Adjusting the sound You can listen to music with strong bass. To reinforce the bass sound Press DBFB (Dynamic Bass Feedback).
MHC-G202/C20. 3-859-548-12. EN 20 W aking up to music — Wake-up Timer You can wake up to music at a preset time. Make sure you have set the clock (see page 5). 1 Prepare the music source you want to play. • CD: Place a CD. • Radio: Tune in a station (see page 11).
MHC-G202/C20. 3-859-548-12. EN 21 5 Set the time to stop playback. Press )± or 0 to set the hour, then press TIMER SET. The minute indication starts flashing. Press )± or 0 to set the minute, then press TIMER SET. The start time, followed by the stop time, the music source and volume appear, then the original display appears.
MHC-G202/C20. 3-859-548-12. EN 22 Additional Information Precautions On operating voltage Before operating the system, check that the operating voltage of your system is identical with the voltage of your local power supply.
23 MHC-G202/C20. 3-859-548-12. EN continued T roubleshooting If you run into any problem using this stereo system, use the following check list. First, check that the mains lead is connected firmly and the speakers are connected correctly and firmly. Should any problem persist, consult your nearest Sony dealer.
MHC-G202/C20. 3-859-548-12. EN 24 CD Player The CD tray does not close. • The CD is not placed properly. The CD will not play. • The CD is dirty. • The CD is inserted label side down. • Moisture condensation has built up. Remove the CD and leave the system turned on for about an hour until the moisture evaporates.
25 MHC-G202/C20. 3-859-548-12. EN Specifications For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, both channels driven, from 70 – 20,000 Hz; rated 32 watts per channel minimum RMS power, with no more than 0.
MHC-G202/C20. 3-859-548-12. EN 26 General Power requirements North American models: 120 V AC, 60 Hz Mexican models: 120 V AC, 50/60 Hz Australian models: 220 – 240 V AC, 50/60 Hz Other models: 110 – 120 V or 220 – 240V AC, 50/ 60 Hz adjustable with voltage selector Power consumption 195 watts Dimensions Approx.
27 MHC-G202/C20. 3-859-548-12. EN Index A Adjusting the sound 19 the volume 9 Antennas 5, 7 Automatic Source Selection 9 B Batteries 5 C CD player 9, 15 Clock setting 5 Connecting. See Hooking up D, E, F, G DBFB 19 Display 5, 6 H, I, J, K, L Hooking up the antennas 5, 7 the power 5 the system 4 M, N M.
MHC-G202/C20. 3-859-548-12. EN 28 Sony Corporation Printed in China.
Ein wichtiger Punkt beim Kauf des Geräts Sony MHC-G202/C20 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony MHC-G202/C20 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony MHC-G202/C20 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony MHC-G202/C20 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony MHC-G202/C20 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony MHC-G202/C20 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony MHC-G202/C20 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony MHC-G202/C20. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony MHC-G202/C20 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
