Benutzeranleitung / Produktwartung 2072-0400 des Produzenten Bacharach
Zur Seite of 40
Instruction 2072-0400 Operation & Maintenance Rev. 0 – March 2002 Product Leadership • Training • Se rvic e • Reliability.
WARRANTY Bacharach, Inc. warrants to Buyer that at the time of delivery this Product will be free from defects in material and manufacture and will conf orm substantially to Bach arach Inc.
Contents MAC 2000 Table of Contents 1 Introduc tion .......................................................................................................... 1 1.1 Glossary of Terms ....................................................................
MAC2000 SERIES: MAC2000 Refrigerant: 134a KENT MOORE: J-055000 Air Conditioning and Refrigerant Service Solution WARNING PRESSURIZED TA NK CONTAINS LIQUID REFRIGERA NT. OVERFILLING OF THE TA NK MA Y CA USE VIOLENT EXPLOSION A ND POSSIBLE INJURY OR DEA TH .
MAC2000 Introduction 1 Introduction Important! These instructions are for qualified personnel, trained and experienced in the handling of refrigerants.
Introduction MAC2000 1.1 Glossary of Terms A/C Air conditioner or air conditioning A/C System The vehicle’s air conditioning system Unit The MAC2000 itself Screen LCD Display Contaminated Refrigerant that has been mixed with some other type of refrigerant.
MAC2000 Introduction 1.3 Component Location and Description MAC2000 Control Panel High Side Gauge – Shows the pressure in the high side of the vehicle’s A/C system. Low Side Gauge – Shows the pressure in the low side of the vehicle’s A/C system.
Introduction MAC2000 Instruction 2072-0400 4 MAC2000 Front View MAC2000 Right-Side View.
MAC2000 Introduction Instruction 2072-0400 5 MAC2000 Left-Side View MAC2000 Back View.
Introduction MAC2000 Instruction 2072-0400 6 Closeup of MAC2000 Handle Panel Note: The auxiliary tank ports are not used as this time. Temperature and Velocity Data Ports Note: The communications ports are used for software updates and future options, and are not used during normal operation.
MAC2000 Introduction Instruction 2072-0400 7 1.4 Using the Function Keys The operation of each function key (F1–F5) depends on the service operation and unit status. The display shows five labels along the bottom of the screen pointing to the function keys below.
Introduction MAC2000 Instruction 2072-0400 8 Notes:.
MAC2000 Initial Set-Up 2 Initial Set-Up 2.1 Initial Set-Up Instructions WARNING It is extremely important to follow these instructions! Improper setup will result in potential inaccuracies when operating the unit.
Initial Set-Up MAC2000 7. Attach the yellow refill hose coming from behind the tank to the source tank fitting. Open the source tank valve. To avoid the possible of lost refrigerant, the ex ternal source tank should be checked for leakage around the t ank valve.
MAC2000 Initial Set-Up 2.2 Checking Vehicles for Possible Contaminated Systems Before every recovery, the MAC2000 automatically samples the refrigerant in the vehicle’s A/C syst em. If the system fails the purity level required, the unit tests a second time.
Initial Set-Up MAC2000 Notes: Instruction 2072-0400 12.
MAC2000 Operation 3 Operation 3.1 MAC2000 Operational Overview The MAC2000 is an EPA-approved, ETL-listed, single-pass recycling system. During the recovery operat ion, refrigerant is removed from the vehicle and passed through an oil separator and filter drier before entering the storage tank.
Operation MAC2000 Main Menu Recovery Vacuum Charg e Snapshot Next mode mode mode mode menu • Recovery mode – Recovers and recycles refrigerant from a vehicle’s A/C system. This mode is most often used prior to opening an A/C system to atmosphere to replace a system component.
MAC2000 Operation Menu 3 Main Identify Check Refri Filter menu mode tank air data change • Main menu – Returns display to the Main menu. • Identify mode – Identifies refrigerant in a vehicle’s A/C system without having to recover the refrig erant.
Operation MAC2000 Data is collected from inside the vehicle’s passenger compartment by means of the snap-shot transmitter (shown below). This transmitter is powered from the vehicle’s cigarette -lighter, and wirelessly transmits temperature (and optional air flow) data to the MAC2000.
MAC2000 Operation 3. Follow the instructions on the screen. A technician will be instructed to connect the high- and low-side service hoses to their respective service ports on the vehicle’s A/C system and open the A/C system’s service-port valves.
Operation MAC2000 3.3 Recovery Mode The recovery mode removes all re frigerant from the vehicle’s A/C system and stores it in the unit’ s internal storage tank. Before recovery begins, however, there must be pressure in the hoses. This prevents inadvertent recovery of air or other contaminants from a leaking system.
MAC2000 Operation Note: The MAC2000 will automatically restart the recovery process if the unit senses a rise in the A/C system’s pressure. 5. After recovering the refrigerant from the A/C system, close the service-port valves, and then remove the hoses from the vehicle.
Operation MAC2000 achieved. When the A/C system reaches the proper vacuum, the unit’s red light and beeper signal evacuation is complete, and the screen reads “ Vacuum complete .” If the proper vacuum is not achieved after 7 minutes of evacuat ion, the process stops, and the technician is prompted to check for a leak.
MAC2000 Operation 3. After entering the Charge mode, the following options are available: • Press the Enter key to accept the 2.00 pound Default. • Press the Weight Convert key to change the “ Set charge weight ” units. • Use the Increase or Decrease keys to set the desired charge amount.
Operation MAC2000 7. If more refrigerant needs to be added, press the Additional Charge function key. Otherwise, press the Done function key to exit the Snap-Shot mode. 8. Close the service-port valves; remove the service hoses from the vehicle; then press the Start key to recover the hoses.
MAC2000 Operation 5. Again press Start to continue. The unit now displays “ Set Flush Time .” Set the flush time by pressing and holding down the Increase or Decrease key until the desired time is shown. Press Start to accept the flush time shown on the screen.
Operation MAC2000 3.7 Refrigerant Management System The MAC2000’s Refrigerant Managemen t System tracks all aspects of refrigeration usage, which can sign ificantly help in the management of an A/C repair business. In addition, the unit’s software allows a business to meet new federal regula tions requiring strict records of refrigerant usage.
MAC2000 Operation • Total Flush ........ Time spent flushing and number of times it was performed • Recovered ......... Total amount of refrigerant recovered • Charged .
Operation MAC2000 3.9 System Set Up When the MAC2000 is initially turned on for the first time, the unit automatically enters its System Set-Up mode. The unit must then be set up by following the on-screen prompts before it can be used.
MAC2000 Operation Perform a refrigerant identity check as follows: 1. If not already done, plug the MAC2000 into a properly grounded AC outlet; set the Power switch to ON; then wait until the unit completes its self diagnostics. The screen will display “ Select mode ” when ready.
Operation MAC2000 4. Depending on the percentage of air found in the internal tank, perform one of the following: • If the display shows “ Identifier result: EXCESSIVE ,” then purge the tank by first pressing the Reset key to display the message “ Would you like to purge air? ” Then press the Start key to begin purging air.
MAC2000 Maintenance 4 Maintenance Field maintenance of the MAC2000 is limited to the following: • Changing the filter drier • Tracking of refrigerant using the unit’s Refrigerant Management Syst.
Maintenance MAC2000 Caution: The filter drier should not be changed with the MAC2000 still connected to the vehicle. Disconn ect the unit by closing the vehicle’s service-port valves and disconnecting the high- and low-side hoses from the vehicle. 1.
MAC2000 Maintenance To replace the external source tank: 1. Close tank valve; remove yellow hose from tank valve; release tank strap; then remove tank from side of unit. 2. Place a new source tank on the shelf and secure it with the tank strap. The tank strap must be set up to supply liquid – this usually means the tank is inverted .
Maintenance MAC2000 4.4 Replacing the Refrigerant Identifier Filter Caution: Visually inspect the Refrigerant Identifier Filter every day. If it begins to turn red, replace it immediately! You risk damaging the identifier sensor if the filter is not replaced.
MAC2000 Parts and Service 5 Part s and Service 5.1 Parts Model MAC2000, 115VAC 50/60 Hz ........................................ 2000-4200 Model MAC2000, 220–240VAC, 50/60 Hz ............................... 2000-4206 Bottle, Oil Drain ..............
Parts and Service MAC2000 5.2 Service Centers Service and replacement parts can be obtained by contacting a Bacharach Service Center at the following locations: California 7281 Garden Grove Blvd., Suite H Garden Grove, CA 92841 Phone: 714-895-0050 Fax: 714-895-7950 E-mail: calservice@bacharach-inc.
.
World Headquarters 621 Hunt Valley Circle, New Kensington, PA 15068-7074 Ph: 724-334-5000 • Fax: 724-334-5001 • Toll Free: 1-800-736-4666 Webs ite : www.
Ein wichtiger Punkt beim Kauf des Geräts Bacharach 2072-0400 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Bacharach 2072-0400 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Bacharach 2072-0400 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Bacharach 2072-0400 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Bacharach 2072-0400 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Bacharach 2072-0400 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Bacharach 2072-0400 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Bacharach 2072-0400. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Bacharach 2072-0400 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
