Benutzeranleitung / Produktwartung LT30p des Produzenten Sony
Zur Seite of 119
User guide Xperia ™ T LT30p.
Contents Xperia™ T User guide ..................................................................6 Getting started.............................................................................. 7 About this User guide .................................
Forwarding calls ............................................................................... 41 Restricting calls................................................................................ 41 Multiple calls ...................................
Camera ........................................................................................ 66 Taking photos and recording videos ............................................... 66 Face detection ...................................................
Calendar and alarm clock ....................................................... 105 Calendar......................................................................................... 105 Alarm clock ....................................................
Xperia™ T User guide 6 This is an Internet version of this publication. © Print only for private use..
Getting started About this User guide This is the Xperia™ T User guide for the Android™ 4.3 (Jelly Bean) software version. If you're not sure which software version your device is running, you can check it via the Settings menu. For more information about software updates, see Updating your device .
1. Notification LED 2. Light sensor 3. Proximity sensor 1 4. Proximity sensor 2 5. Ear speaker 6. Front camera lens 7. Headset connector 8. Power key 9. Volume/Zoom key 10. Camera key 11. Main microphone 12. Touchscreen 13. Second microphone 14. Camera lens 15.
Assembly To insert the memory card and the micro SIM card 1 Remove the cover for the memory card and the micro SIM card. 2 Insert the memory card and the micro SIM card into the relevant slots. The memory card may not be included at purchase in all markets.
1 Press and hold down the power key until the device vibrates. 2 If your screen goes dark, briefly press the power key to activate the screen. 3 Enter your SIM card PIN when requested, then tap . 4 If your screen is locked, place a finger on the screen and swipe up or down to unlock it.
To activate the screen • Briefly press the power key . To unlock the screen • Place a finger on the screen and swipe up or down. There are several ways to unlock the screen. For more information, see Setting a screen lock on page 112. To lock the screen • When the screen is active, briefly press the power key .
Microsoft ® Exchange ActiveSync ® account Synchronise your device with your corporate Microsoft ® Exchange ActiveSync ® account. This way, you keep your work email, contacts and calendar events with you at all times.
Getting to know your device Using the keys Back • Go back to the previous screen • Close the on-screen keypad, a dialog box, an options menu, the Notification panel, or an application Home • Go .
To zoom • Place two fingers on the screen at once and pinch them together (to zoom out) or spread them apart (to zoom in). When you use two fingers on the screen to zoom, it is only possible to zoom if both fingers are within the zoomable area.
To flick • To scroll more quickly, flick your finger in the direction you want to go on the screen. You can wait for the scrolling movement to stop by itself, or you can stop it immediately by tapping the screen. Sensors Your device has sensors that detect both light and proximity.
To charge your device 1 Plug the charger into a power outlet. 2 Plug one end of the USB cable into the charger (or into the USB port of a computer). 3 Plug the other end of the cable into the micro USB port on your device, with the USB symbol facing up.
• Check the battery usage menu in your device to see which applications use the most power. Your battery consumes more power when you use video and music streaming applications, such as YouTube™. Some applications downloaded from Google Play™ may also consume more power.
Using Low battery mode You can activate the Low battery mode feature to save power when the battery level is low. This feature helps you to adjust the settings for screen brightness, data traffic and the vibrate function so that you can reduce battery consumption.
To go to the Home screen • Press . To browse the Home screen • Flick right or left. To set a pane as the main Home screen pane 1 Touch and hold an empty area on your Home screen until the device vibrates. 2 Flick left or right to browse to the pane that you want to set as your main Home screen pane, then tap .
Customisation options When you touch and hold an empty area of your Home screen, the following customisation options appear: Add widgets to your Home screen. Add applications and shortcuts. Set a wallpaper for your Home screen. Set a background theme.
To set a theme for your Home screen 1 Touch and hold an empty area on your Home screen until the device vibrates. 2 Tap Themes , then select a theme. When you change a theme, the background also changes in some applications. Taking a screenshot You can capture still images of any screen on your device as a screenshot.
To close an application • Press . Some applications are paused when you press to exit, while other applications may continue to run in the background.
To add a widget as a small app 1 To make the small apps bar appear, press . 2 Tap > > . 3 Select a widget. 4 Enter a name for the widget, if desired, then tap OK . Application menu You can open a menu at any time when you are using an application.
Checking notifications and ongoing activities You can drag down the status bar to open the Notification panel and get more information. For example, you can use the panel to open a new message or view a calendar event. You can also open some applications that run in the background, such as the music player.
To clear all notifications from the Notification panel • Tap Clear . Setting your device from the Notification panel You can open the settings menu from the Notification panel to adjust device quick settings. For example, you can turn on Wi-Fi ® . To open the device settings menu from the Notification panel 1 Drag the status bar downwards.
On-screen keyboard You can enter text with the on-screen QWERTY keyboard by tapping each letter individually, or you can use the Gesture input feature and slide your finger from letter to letter to form words. You can select up to three languages for text input.
Phonepad The Phonepad is similar to a standard 12-key telephone keypad. It gives you predictive text and multi-tap input options. You can activate the Phonepad text input method via the keyboard settings. The Phonepad is only available in portrait orientation.
To enable voice input 1 When you enter text using the on-screen keyboard or the Phonepad, tap or . 2 Tap , then tap Keyboard settings . 3 Mark the Google voice typing key checkbox. 4 Press to save your settings. A microphone icon appears on your on- screen keyboard or Phonepad.
type. And you can get your message data scanned so that word predictions fit your writing style. You can also set the text input application to remember new words that you write. To access the on-screen keyboard and Phonepad settings 1 When you enter text using the on-screen keyboard or Phonepad, tap or .
To set your device to silent mode 1 Press the volume key down until the device vibrates and appears in the status bar. 2 Press the volume key down again. appears in the status bar. To set your device to vibrate and ring mode 1 From your Home screen, tap .
Screen settings To adjust the screen brightness 1 From your Home screen, tap . 2 Find and tap Settings > Display > Brightness . 3 Unmark the Adapt to lighting conditions checkbox if it is marked. 4 Drag the slider to adjust the brightness. Lowering the brightness level increases battery performance.
Formatting the internal storage You can format your phone's internal storage, for example, to free up memory. By doing so, you erase all data on the internal storage. Make sure you make backups of everything that you want to save before formatting the internal storage.
Using a headset Use the accessories provided with your device, or other compatible accessories, for optimal performance. To use a headset 1 Connect the headset to your device. 2 To answer a call, press the call handling key. 3 To end the call, press the call handling key.
To view the current APN 1 From your Home screen, tap . 2 Find and tap Settings > More… > Mobile networks . 3 Tap Access Point Names . If you have several available connections, the active network connection is indicated by a marked button. To add Internet settings manually 1 From your Home screen, tap .
To set a data usage limit 1 Make sure that data traffic is turned on. 2 Drag the status bar downwards, then tap . 3 Find and tap Data usage . 4 Mark the Set mobile data limit checkbox if it is not marked, then tap OK . 5 To set the data usage limit, drag the corresponding line to the desired value.
To activate data roaming 1 From the Home screen, tap . 2 Find and tap Settings > More… > Mobile networks . 3 Mark the Data roaming checkbox. You can’t activate data roaming when data connections have been deactivated. 36 This is an Internet version of this publication.
Downloading applications Downloading applications from Google Play™ Google Play™ is the official online Google store for downloading applications, games, music, movies and books.
Calling Making calls You can make a call by manually dialling a phone number, by tapping a number saved in your contacts list, or by tapping the phone number in your call log view. You can also use the smart dial feature to quickly find numbers from your contacts list and call logs.
To make an international call 1 From your Home screen, tap . 2 Find and tap Phone . 3 Touch and hold 0 until a “+” sign appears. 4 Enter the country code, area code (without the first 0) and phone number, then tap .
Ongoing calls 1 Open your contacts list 2 Turn on the loudspeaker during a call 3 Mute the microphone during a call 4 Enter numbers during a call 5 End a call To change the ear speaker volume during a call • Press the volume key up or down. To activate the screen during a call • Briefly press .
Forwarding calls You can forward calls, for example, to another phone number, or to an answering service. To forward calls 1 From your Home screen, tap . 2 Find and tap Settings > Call settings > Call forwarding . 3 Select an option. 4 Enter the number you want to forward the calls to, then tap Enable .
To make a second call 1 During an ongoing call, tap . 2 Enter the number of the recipient and tap . The first call is put on hold. To switch between multiple calls • To switch to another call and put the current call on hold, tap Switch to this call .
Emergency calls Your device supports international emergency numbers, for example, 112 or 911. You can normally use these numbers to make emergency calls in any country, with or without a SIM card inserted if you are within range of a network. To make an emergency call 1 From your Home screen, tap .
Contacts Transferring contacts There are several ways to transfer contacts to your new device. Find out more about choosing a transfer method at www.sonymobile.
To import contacts using Bluetooth ® technology 1 Make sure you have the Bluetooth ® function turned on and that your device is set to visible. 2 When you are notified of an incoming file to your device, drag the status bar downwards and tap the notification to accept the file transfer.
To select which contacts to display in the Contacts application 1 From your Home screen, tap , then tap . 2 Press , then tap Filter . 3 In the list that appears, mark and unmark the desired options. If you have synchronised your contacts with a synchronisation account, that account appears in the list.
To edit contact information about yourself 1 From your Home screen, tap , then tap . 2 Tap Myself , then tap . 3 Enter the new information or make the changes you want. 4 When you are done, tap Done . To create a new contact from a text message 1 From your Home screen, tap , then find and tap .
happens, you can join such duplicates to create a single entry. And if you join entries by mistake, you can separate them again later. To link contacts 1 From your Home screen, tap , then tap . 2 Tap the contact that you want to link with another contact.
Messaging and chat Reading and sending messages The Messaging application shows your messages as conversations, which means that all messages to and from a particular person are grouped together. To send multimedia messages, you need the correct MMS settings on your device.
To reply to a message 1 From your Home screen, tap , then find and tap . 2 Tap the conversation containing the message. 3 Enter your reply and tap Send . To forward a message 1 From your Home screen, tap , then find and tap . 2 Tap the conversation containing the message that you want to forward.
Calling from a message To call a message sender 1 From your Home screen, tap , then find and tap . 2 Tap a conversation. 3 Tap the recipient name or number at the top of the screen, then select the recipient name or number from the list that appears. 4 If the recipient is saved in your contacts, tap the phone number that you want to call.
1 Start a new chat or video call 2 Options 3 List of contacts To start an instant message or a video call 1 From your Home screen, tap . 2 Find and tap Hangouts . 3 Tap , then enter a contact name, email address, phone number or circle name and select the relevant entry from the suggested list.
Email Setting up email Use the email application in your device to send and receive email messages through your email accounts. You can have one or several email accounts at the same time, including corporate Microsoft Exchange ActiveSync accounts. To set up an email account 1 From your Home screen, tap .
4 Access settings and options 5 List of email messages To download new email messages 1 From your Home screen, tap . 2 Find and tap Email . 3 If you are using several email accounts, tap and select the Inbox of the account that you want to check. 4 To download new messages, tap .
To activate the preview pane 1 From your Home screen, tap , then find and tap Email . 2 Tap , then tap Settings . 3 Tap General > Preview pane . 4 Select an option, or a combination of options, then tap OK . To read email messages using the preview pane 1 Make sure the preview pane is activated.
Email account settings To remove an email account from your device 1 From your Home screen, tap . 2 Find and tap Email . 3 Press , then tap Settings . 4 Select the account you want to remove. 5 Tap Delete account > OK . To change the inbox check frequency 1 From your Home screen, tap .
Music Transferring music to your device There are different ways to get music from a computer to your device: • Connect the device and computer using a USB cable and drag and drop music files directly into the file manager application on the computer.
To play a song 1 From your Home screen, tap , then find and tap . 2 If the WALKMAN home screen is not displayed, tap . 3 Select a music category, for example, under Artists , Albums or Songs , then browse to the song that you want to open. 4 Tap a song to play it.
7 Browse all playlists 8 Collect links to music and related content that you and friends have shared using online services 9 Manage and edit your music using Music Unlimited channels 10 Open the "WALKMAN" music player Sony Entertainment Network with Video Unlimited and Music Unlimited is not available in every market.
To create your own playlists 1 Open the WALKMAN home screen. 2 To add an artist, album or a song to a playlist, touch and hold the name of the artist or the title of the album or song. 3 In the menu that opens, tap Add to > Create new playlist . 4 Enter a name for the playlist and tap OK .
To manage music from your friends 1 Open the WALKMAN home screen, then tap Friends' music > Recent . 2 Tap an item to open it, then work on it as desired. 3 Tap to show that you "Like" the song on Facebook™ . If desired, add a comment in the comments field.
1 View TrackID options 2 View current music charts 3 View the search result history 4 Record and identify music The TrackID™ application and the TrackID™ service are not supported in all countries/regions, or by all networks and/or service providers in all areas.
Music Unlimited online service Music Unlimited is a subscription-based service that offers access to millions of songs over a mobile network or Wi-Fi ® connection. You can manage and edit your personal music library in the cloud from a variety of devices, or sync your playlists and music using a PC that runs the Windows ® operating system.
FM radio Listening to the radio The FM radio in your device works like any FM radio. For example, you can browse and listen to FM radio stations and save them as favourites. You must connect a wired headset or headphones to your device before you can use the radio.
To switch the radio sound to the speaker 1 When the radio is open, press . 2 Tap Play in speaker . To switch the sound back to the wired headset or headphones, press and tap Play in headphones . To identify a song on the FM radio using TrackID™ 1 While the song is playing on your device's FM radio, press , then select TrackID™ .
Camera Taking photos and recording videos 1 Camera key – Activate the camera/Take photos/Record videos 2 View photos and videos 3 Take photos or record video clips 4 Go back a step or exit the camer.
To record a video using the camera key 1 Activate the camera. 2 Tap , and select . 3 If the video camera is not selected, tap . 4 To start recording a video, press the camera key. 5 To stop recording, press the camera key again. To record a video by tapping the screen 1 Activate the camera.
To take a photo using Smile Shutter™ 1 When the camera is open and Smile Shutter™ is turned on, point the camera at your subject. The camera selects which face to focus on. 2 The face selected appears inside a coloured frame and the photo is taken automatically.
Touch capture Identify a particular focus area by touching the camera screen with your finger. The photo is taken as soon as you release your finger. This setting is only available when focus mode is set to touch focus. Shutter sound Choose to turn on or turn off the shutter sound when you record a video.
5 megapixel resolution with 4:3 aspect ratio. Suitable for photos you want to view on non-widescreen displays or print in high resolution. 2MP 1920×1080(16:9) 2 megapixel resolution with 16:9 aspect ratio. Suitable for photos you want to view on widescreen displays.
Sets the ISO sensitivity to 200. 400 Sets the ISO sensitivity to 400. 800 Sets the ISO sensitivity to 800. This setting is only available in Manual capturing mode. Metering This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos. Flashlight A torch or camera light is turned on when you take photos.
When you select an object by touching it in the viewfinder, the camera tracks it for you. This setting is only available in Manual capturing mode. Metering This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
Album Viewing photos and videos Use the Pictures tab in the Album application to view photos and play videos that you’ve taken with your camera, or to view similar content that you've saved to your device. All photos and videos are displayed in a chronologically ordered grid.
To watch a slideshow of your photos with music 1 When you are viewing a photo, tap the screen to display the toolbars, then tap > SensMe™ slideshow . 2 Select the music and theme that you want to use for the slideshow, then tap . The Album application analyses your photos and uses SensMe™ music data to play a slideshow.
To work with batches of photos or videos in Album 1 When viewing thumbnails of photos and videos in Album, tap , then tap Select items . 2 Tap the items that you want to work with. Selected items are indicated by a blue frame. 3 Use the tools in the toolbars to work with your selected items.
To apply special effects to a photo 1 When you are viewing a photo, tap the screen to display the toolbars, then tap . 2 If prompted, select Photo editor > Just once .
6 View all photos and videos saved to your device's internal storage 7 View your photos in globe mode 8 View your photos on a map 9 View all photos and videos saved to the removable memory card 10 View all photos with faces The PlayMemories online service is not available in all countries or regions.
1 Search a location on the map. 2 View menu options. 3 A group of photos and/or videos geotagged with the same location. 4 Double tap to zoom in. Pinch to zoom out. Drag to view different parts of the map. 5 Thumbnails of the selected group of photos and/or videos.
Movies Watching videos in the Movies application Use the Movies application to play movies and other video content that you’ve saved or downloaded to your device. The Movies application also helps you get poster art, plot summaries, genre info and director details for each movie.
To change settings in Movies 1 From your Home screen, tap , then find and tap Movies . 2 Tap , then change the settings as desired. To change the sound settings while a video is playing 1 While a video is playing, tap the screen to display the controls.
Video Unlimited Video Unlimited service Use the Video Unlimited service to rent and buy movies or TV shows that you can view not only on your Android™ device, but also on a PC, PlayStation ® Portable (PSP ® ), PlayStation ® 3 or PlayStation ® Vita.
Web browser Browsing the web The Google Chrome™ web browser for Android™ devices comes pre-installed in most markets. Go to http://support.google.com/chrome and click the "Chrome for Mobile" link to get more detailed information about how to use this web browser.
Connectivity Connecting to wireless networks You can access the Internet wirelessly from your device using Wi-Fi® technology. This way you can browse the web and share media files over the same Wi-Fi® network with other DLNA Certified™ devices, for example, TVs and computers.
Advanced Wi-Fi® settings Wi-Fi® network status When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks available in your vicinity, it is possible to see the status of these Wi-Fi® networks. You can also enable your device to notify you whenever an open Wi-Fi® network is detected.
shared, the sharing devices can use your device's data connection, for example, to surf the Internet, download applications, or send and receive emails. You may need to prepare your computer to establish a network connection via USB cable. Go to www.
To connect to a virtual private network 1 From your Home screen, tap . 2 Find and tap Settings > More… > VPN . 3 In the list of available networks, tap the VPN that you want to connect to. 4 Enter the required information. 5 Tap Connect . To disconnect from a virtual private network 1 Drag the status bar downwards.
available to client devices. When you set up file sharing on your device, you must also give access permission to client devices. After you do so, such devices appear as registered devices. Devices that are waiting for access permission are listed as pending devices.
render, or play, content received from your device. A DMR device can be, for example, a TV with DLNA function, or a PC running Windows® 7 or higher. The settings for enabling the Digital Media Renderer may vary depending on the device used. Refer to the user guide for the respective device for more detailed information.
NFC detection area The location of the NFC detection area is not the same on all devices. When sharing data with another device using NFC, refer to the User guide of the other device for more information. To share a contact with another device using NFC 1 Make sure that both devices have the NFC function turned on, and that both screens are active.
To share a photo or video with another device using NFC 1 Make sure that both devices have the NFC function turned on, and that both screens are active. 2 To view photos and videos in your device, go to your Home screen, tap , then find and tap Album .
To turn on the Bluetooth ® function and make your device visible 1 Drag the status bar downwards, then tap . 2 Tap the on-off switch beside Bluetooth to turn on the Bluetooth ® function. 3 Tap Bluetooth . Your device and a list of available Bluetooth ® devices appear.
To connect your device to another Bluetooth ® device 1 If you are connecting to a Bluetooth ® device that requires you to first pair your device before connecting, follow the relevant steps to pair your device with that device. 2 Drag the status bar downwards, then tap .
Connecting your device to a computer Connect your device to a computer and start transferring pictures, music and other types of files. The easiest ways to connect are using a USB cable or Bluetooth ® wireless technology.
the computer. Media Go™ converts media files so that you can use them on your device. In order to use this feature, you need a Wi-Fi ® enabled device that supports Media transfer, for example, a computer running Microsoft ® Windows Vista ® or Windows ® 7.
To install PC Companion [MR2] 1 Make sure the Install software checkbox under Settings > Xperia™ > USB Connectivity is marked. 2 Connect your device to a PC using a USB cable. 3 Device : Tap Install . 4 Computer : The PC Companion installer starts automatically after a few seconds.
To transfer content using Sony™ Bridge for Mac 1 Using a USB cable, connect your device to an Apple ® Mac ® computer. 2 Computer : Open the Sony™ Bridge for Mac application. After a few moments, The Sony™ Bridge for Mac application detects your device.
To mirror the screen of your device on a TV screen 1 TV : Follow the instructions in the User guide for your TV to turn on the screen mirroring function. 2 Your device : Drag the status bar downwards, then tap . 3 Find and tap Xperia™ Connectivity > Screen mirroring .
• Between 7am and 9am, when you commute to work, the "WALKMAN" application starts, and the web browser opens the morning paper. The ring volume is set to vibrate. • On the way back from work, the FM radio starts, and a notes app opens showing your shopping list.
Synchronising data on your device About synchronising data on your device You can sync contacts, email, calendar events, and other information with your device from multiple email accounts, synchronisation services and other kinds of accounts, depending on the applications installed on your device.
setup, you can find your information in the Email , Calendar and Contacts applications. To set up corporate email, calendar and contacts for synchronisation 1 From your Home screen, tap . 2 Tap Settings > Add account > Exchange ActiveSync . 3 Enter your corporate email address and password.
1 From your Home screen, tap . 2 Tap Settings > Xperia™ with Facebook . 3 Select the account that you want to remove. 4 Press , then tap Remove account . 5 Tap Remove account again to confirm. 102 This is an Internet version of this publication. © Print only for private use.
Maps and locations Location services and sources Use your device to find out where you are. There are two methods, or sources: GPS satellites and wireless networks. Enable the wireless networks option (Wi-Fi and mobile networks) if you only need your approximate location, and want it fast.
Google Maps™ Use Google Maps™ to track your current location, view real-time traffic situations and receive detailed directions to your destination. Before taking trips, you can download and save maps to your memory card to avoid high roaming costs.
Calendar and alarm clock Calendar About the calendar Your device has a calendar for managing your time schedule. If you have a Google™ account, you can also synchronise your device calendar with your web calendar. See Synchronising with Microsoft® Exchange ActiveSync® on page 100.
To set a new alarm 1 From your Home screen, tap . 2 Find and tap Alarm & clock . 3 Tap . 4 Tap Time and adjust the time by scrolling up and down. 5 Tap Set . 6 If desired, edit other alarm settings. 7 Tap Done . To edit an existing alarm 1 From your Home screen, tap .
To activate the vibrate function for an alarm 1 From your Home screen, tap . 2 Find and tap Alarm & clock . 3 Tap the alarm you want to edit. 4 Mark the Vibrate checkbox. 5 Tap Done . The vibrate feature is enabled by default when you create a new alarm.
Support and maintenance Updating your device Update your device to the most recent software version to get optimal performance and the latest enhancements. You can use the Update center application on your device to run a wireless update or you can use the PC Companion application on a computer to run an update using a USB cable connection.
To launch the download of PC Companion using your device 1 Connect your device to a computer using a USB cable. 2 When prompted, follow the instructions in your device to launch the installation of PC Companion on the computer.
To select the data types to back up 1 From your Home screen, tap . 2 Find and tap Back up & restore . 3 Tap Back up . 4 Select the data types that you want to back up. To back up content 1 From your Home screen, tap . 2 Find and tap Back up & restore .
1 Before you start, make sure to back up any important data that is saved on the internal memory of your device to a memory card or other non-internal memory. 2 From your Home screen, tap . 3 Find and tap Settings > Backup & reset > Factory data reset .
To view your IMEI number in the device 1 From your Home screen, tap . 2 Find and tap Settings > About phone > Status . 3 Scroll to IMEI to view the IMEI number.
To change the screen unlock pattern 1 From your Home screen, tap . 2 Find and tap Settings > Security > Screen lock . 3 Draw your screen unlock pattern. 4 Tap Pattern . 5 Follow the instructions in your device. To disable the screen unlock pattern 1 From your Home screen, tap > Settings > Security > Screen lock .
Support application To access the Support application 1 From your Application screen, find and tap . 2 Find and tap the required support item. Recycling your device Got an old device lying around the .
Reference Status and notification icons overview Status icons The following status icons may appear on your screen: Signal strength No signal Roaming GPRS is available EDGE is available LTE is availab.
Notification icons The following notification icons may appear on your screen: New email message New text message or multimedia message New voicemail Upcoming calendar event A song is playing The devi.
View your current location, find other locations, and calculate routes using Google Maps™. Go to Google Play™ to download free and paid applications for your device. Use the Messaging application to send and receive text and multimedia messages. Use the Movies application to play videos in your device and share content with your friends.
Important information Important information leaflet Before you use your device, please read the Important information leaflet provided in the Setup guide in your device or in the box. To access the setup guide manually 1 From the Home screen, tap . 2 Tap Settings > Setup guide .
(WHETHER IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO NEGLIGENCE OR OTHERWISE) EXCEED THE AMOUNT ACTUALLY PAID BY YOU FOR YOUR DEVICE. 119 This is an Internet version of this publication.
Ein wichtiger Punkt beim Kauf des Geräts Sony LT30p (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony LT30p noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony LT30p - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony LT30p reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony LT30p erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony LT30p besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony LT30p verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony LT30p. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony LT30p gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
