Benutzeranleitung / Produktwartung HT-SF1300 des Produzenten Sony
Zur Seite of 72
©2008 Sony Corporation 3-295-946- 12 (1) Home Theatr e System Operating Instructions HT -SF1300 HT -SS1300.
2 GB T o reduce the risk of fire or electric shock, do not e xpose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curt ains, etc. Do not place the naked flame sources such as lighted candles on the apparatus.
3 GB About This Manual • The instructions in th is manual are for model HT-SF1300 and HT-SS13 00. In this manual, models of area code CEL is used for illustration purposes unless stated ot herwise. Any difference in operation is clearly i ndicated in the text, for example, “Models of area code CEL only”.
4 GB T able of Contents Getting Started Description and location of parts ................... 5 1: Installing the speakers ............................. 11 2: Connecting the speakers .......................... 14 3: Connecting the audio/video components .
5 GB Getting Started Description and location of parts Front panel Getting Started Receiver BD ?/1 ACTIVE STANDBY MASTER V OLUME AUTO CAL MIC INPUT SELECTOR PRESET TUNING SOUND FIELD MUTING ?/1 DMPORT.
6 GB About the indicators on the displa y L CR SL SR SW D.RANGE RDS ST MONO MEMOR Y S DIGIT AL DTS HDMI PL OPT CO AX 2 1 3 4 5 6 7 8 9 q; qa qs qd qf SLEEP LFE Name Function A LFE Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced.
7 GB Getting Started Rear panel 4 12 3 5 OPT IN OPT IN VIDEO 2 COAX IN AUDIO IN DVD DVD IN SA T IN BD IN OUT ANTENNA SA-CD/CD AUDIO IN AUDIO IN FRONT R VIDEO 1 SPEAKERS HDMI AM R L R L FRONT L SUR R S.
8 GB You can use the supplied RM-AAU023 Remote Commander to operate the receiver and to control the Sony audio/video components that the remote is assigned to operate. For details, see “Changing button assignments” (page 61). RM-AA U023 . Remote commander 123 46 78 0/10 ENTER 9 SYSTEM ST ANDBY TV INPUT SLEEP DMPORT VIDEO1 VIDEO2 BD DVD 2CH A.
9 GB Getting Started Name Function F DV D/ B D MENU Press to display the menu of the DVD or Blu-ray disc on the TV screen. Then, use V , v , B , b and ( Q ) to perform menu operations. AU TO C A L Press to activate the Auto Calibration function. G D.T U N IN G Press to enter direct tuning mode.
10 GB a) The number 5, TV VO L +/MASTER VOL + and H buttons have tactile dots. Use the tactile dots as references when operating the receiver. b) This button is also a vailable for DIGIT AL MEDIA POR T adapter operation. For details on the function of the button, see the operating instructions supplied w ith the DIGIT AL MEDIA POR T adapter.
11 GB Getting Started 1: Installing the speakers This receiver allows you to use a 5.1 channel speaker system. To fully enjoy theater-like multi channel surround sound, be sure to connect all the speakers (two front speakers, a center speaker, and two surround speakers) and a subwoofer (5.
12 GB Before you install the speaker and subwoofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Example of HT -SS1300 front speaker HT -SF1300 only You need to attach the supplied foot pads to the center speaker and subwoofer only.
13 GB Getting Started 3 Hang the speakers on the screws. Example of installing the speakers on the wall Notes • Use screws that are suita ble for the wall material and strength. As a plaster board wall is especially fragile, attach th e screws securely to a beam and fasten them to the wall.
14 GB 2: Connecting the speakers A Front speaker (left) B Front speaker (right) C Center speaker D Surround speaker (left) E Surround speaker (right) F Subwoofer SPEAKERS CENTER SUBWOOFER FRONT R FRON.
15 GB Getting Started Note on speaker cords The connector of the speaker cords are the same color as the speaker jack to be connected. When connecting a speaker cord, be sure to match the colored conn.
16 GB 3: Connecting the audio/ video components This section describes how to hook up your components to this receiver. Before you begin, refer to “Component to be connected” below for the pages which describe how to connect the audio/video components.
17 GB Getting Started HDMI is the abbreviated name for High- Definition Multimedia Interface. It is an interface which transmits video and audio signals in digital format. Before connecting cords, make sure to disconnect the AC power cord (mains lead).
18 GB Notes on HDMI connections • Use a HDMI cable with the HDMI logo (made by Son y). • An audio signal input to the HDMI IN jack is output from the SPEAKERS jacks and HDMI OUT jack. It is not output from any other audio jacks. • Video signals input to the HDMI IN jack can only be output from the HDMI OUT jack.
19 GB Getting Started The following illustration shows how to connect video components such as DVD player, DVD recorder or VCR. It is not necessary to connect all the cords. Connect audio and video cords according to the jacks of your components. Before connecting the cords, make sure to disconnect the AC power cord (mains lead).
20 GB If y ou connect a D VD player Be sure to change the factory setting of the DVD input button on the remote so that you can use the button to control your DVD player. For details, see “Changing button assignments” (page 61). Notes • You cannot do recording on the DVD recorder or VCR via this receiver.
21 GB Getting Started 4: Connecting the antennas Connect the supplied AM loop antenna and FM wire antenna. Before connecting the antennas, make sure to disconnect the AC power cord (mains lead). * The shape of the connector varies depending on the area code of this receiver.
22 GB 5: Preparing the receiver and the remote Connect the AC power cord (mains lead) to a wall outlet. Before using the receiver for the first time, initialize the receiver by performing the following procedure. This procedure can also be used to return settings you have made to their factory defaults.
23 GB Getting Started Insert two R6 (size-AA) batteries in the RM-AAU023 Remote Commander. Observe the correct polarity when installing batteries. Notes • Do not leave the remote in an extremely hot or humid place. • Do not use a new battery with old ones.
24 GB Before you perform the Auto Calibration, set up and connect the speakers (page 11, 14). • The A UTO CAL MIC jack is used for the supplied optimizer microphone only . Do not connect other microphones to this jack. Doing so may damage the receiv er and the microphone.
25 GB Getting Started Press AMP MENU , then press AU TO C A L . You can also select “A.CAL YES” in the A. CAL menu. The following appears on the display. A.CAL [5] t A.CAL [4] t A.CAL [3] t A.CAL [2] t A.CAL [1] The measurement process will take approximately 30 seconds to complete.
26 GB 2 Press V / v repeatedly to select the item. Then, press . 3 Save the measurement result. Select “SA VE” in step 2. The measurement results are sav ed. When error codes appear T ry the remedies and perform the Auto Calibration again. T o rectify the error 1 Record down the error code.
27 GB Getting Started When y ou select “W ARN CHK” If a warning on the measurement result is present, detailed information is displayed. Press to return to step 2 of “Confirming/saving the measurement results”. When y ou select “PHASE” You can check the phase of each speaker (in phase/out of phase).
28 GB You can use the A. CAL menu to make settings for the Auto Calibration function to suit your preference. Select “8-A. CAL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34).
29 GB Getting Started 5 Press V / v repeatedly to select “T. TONE Y”. The test tone is output from each speaker in sequence as follows: Front left t Center t Front right t Surround right t Surround left t Subwoofer 6 Adjust the speaker levels and balance using the LEVEL menu so that the level of the test tone sounds the same from each speaker.
30 GB Selecting a component 1 Press the input button to select a component. You can also use INPUT SELECTOR on the receiver. The selected input appears on the display. 2 Turn on the component and start playback. 3 Press MASTER VOL +/– to adjust the volume.
31 GB Playbac k Listening/W atching a component Listening to a Super Audio CD/CD 123 46 78 0/10 ENTER 9 SYSTEM STANDBY TV INPUT SLEEP DMPORT VIDEO1 VIDEO2 BD DVD 2CH A.
32 GB Watching a DVD/Blu-ray disc 123 46 78 0/10 ENTER 9 SYSTEM STANDBY TV INPUT SLEEP DMPORT VIDEO1 VIDEO2 BD DVD 2CH A.F.D . RETURN/EXIT TV CH – PRESET – TV CH + PRESET + TUNING – TV TUNING + FM MODE REPLAY AD VANCE MOVIE MUSIC AMP MENU CLEAR DISPLAY MUTING TV VOL MASTER VOL DVD/BD MENU AUTO CAL D.
33 GB Amplifier Operations Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver. 1 Press AMP MENU. “1-LEVEL” appears on the display. 2 Press V / v repeatedly to select the menu you want.
34 GB The following options are a vailable in each menu. For details on na vigating through menus, see page 33. Overview of the menus Menu [Display] Pa ra m et e rs [Display] Settings Initial setting LEVEL [1-LEVEL] (page 37) Test tone a) [T. TONE] T.
35 GB Amplifier Operations AUDIO [5-AUDIO] (page 39) Digital audio input decoding priority a) [DEC. PRI.] DEC. PCM, DEC. AUTO DEC. AUTO for: VIDEO 1, VIDEO 2, BD, DVD, SAT, TV; DEC. PCM for: SA-CD/CD Digital broadcast language selection a) [DUAL] DUAL M/S, DUAL M, DUAL S, DUAL M+S DUAL M Synchronizes audio with video output a) [A.
36 GB a) For details, refer to the page in the parentheses. b) The surround effect is not availabl e for 2CH STEREO and A.F.D. mode. c) “ A UDIO FOR HDMI” and “CONTROL FOR HDMI” sc roll across the display , then “ AUDIO” and “CONTR OL” appear respectiv ely .
37 GB Amplifier Operations Adjusting the level (LEVEL menu) You can use the LEVEL menu to adjust the balance and level of each speaker. Select “1-LEVEL” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34).
38 GB Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the front speakers. Select “2-TONE” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34).
39 GB Amplifier Operations Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode. Select “4-TUNER” in the amplifier menus. For details on adjusting the parameters, see “Navigating through menus” (page 33) and “Overview of the menus” (page 34).
40 GB x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources.
41 GB Amplifier Operations x CONTROL FOR HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see “Control for HDMI” (page 52). Settings for the system (SYSTEM menu) You can use the SYSTEM menu to set the distance of the speakers connected to this system.
42 GB x SW DIST. (Subwoofer distance) Lets you set the distance from your listening position to the subwoofer. Tip If you set “CAL LOAD” in A. CAL menu to “LOAD YES”, you can adjust the speakers distance in 0.
43 GB Enjoying Surr ound Sound Enjoying Dolby Digital and DTS Surround sound (AUTO FORMA T DIRECT) The Auto Format Direct (A.F.D.) mode allows you to listen to higher fidelity sound and select the decoding mode for listening to a 2 channel stereo sound as multi channel sound.
44 GB Selecting a pre- programmed sound field You can take advantage of surround sound simply by selecting one of the receiver’s pre- programmed sound fields. They bring the exciting and powerful sound of movie theaters and concert halls into your home.
45 GB Enjoying Surr ound Sound Types of sound field available Notes • The effects provided by the virtual speakers may cause increased noise in the playback signal. • When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly fro m the surround speakers.
46 GB Using only the front speakers and subwoofer (2CH STEREO) In this mode, the receiver outputs the sound from the front left/right speakers and subwoofer only. When multi channel surround formats are input, the signals are downmixed to 2 channel with bass frequencies being output from the subwoofer.
47 GB T uner Operations Listening to FM/AM radio You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (page 21). Tip The tuning scale for direct tuning differs depending on the area code as shown in the following table.
48 GB You can enter the frequency of a station directly by using the numeric buttons. 1 Press TUNER repeatedly to select the FM or AM band. You can also use INPUT SELECTOR on the receiver. 2 Press D.TUNING. 3 Press the numeric buttons to enter the frequency.
49 GB T uner Operations 4 Press the numeric buttons to select a preset number. You can also press the PRESET + or PRESET – to select a preset number. If “MEMORY” goes out before you select the preset number, start again from step 3. 5 Press ENTER.
50 GB Using the Radio Data System (RDS) This receiver also allows you to use RDS (Radio Data System), which enables radio stations to send additional information along with the regular program signal. You can display RDS information. Notes • RDS is operable only for FM stations.
51 GB T uner Operations Description of program types Program type indication Description NEWS News programs AFFAIRS Topical programs that expand on current news INFO Programs offering information on a.
52 GB Using the Control for HDMI function for “BRA VIA” Sync To use “BRAVIA” Sync, set the Control for HDMI function as explained below. By connecting Sony components that are compatible with .
53 GB Control f or HDMI Before connecting the cords, be sure to disconnect the AC power cord. T o enjoy TV mu lti channel surround sound br oadcasting You can listen to TV multi channel surround sound broadcasting from the speakers connected to the receiver.
54 GB Preparing Control for HDMI function This receiver supports the Control for HDMI- Easy Setting function. This function is only available for certain types of TV. When you perform the Control for HDMI-Easy Setting from the TV, the Control for HDMI setting on this receiver will automatically change accordingly.
55 GB Control f or HDMI 1 Press AMP MENU. “1-LEVEL” appears on the display . 2 Press V / v repeatedly to select “6-VIDEO”. 3 Press or b to enter the menu. 4 Press V / v repeatedly to select “CONTROL FOR HDMI”. “CONTROL FOR HDMI” scrolls across the display, then “CONTROL” appears.
56 GB Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) You can enjoy the TV sound from the speakers connected to the receiver by a simple operation. You can operate System Audio Control function using the TV menu.
57 GB Control f or HDMI T urning off the receiver with the TV (System Power Off) When you turn the TV off by using the POWER button on the TV’s remote, the receiver and the connected components turn off automatically. You can also use the receiver’s remote to turn off the TV.
58 GB Switching between digital and analog audio (IN MODE) You can select the audio input mode setting when you connect components to both digital and analog audio input jacks on the receiver. 1 Press AMP MENU. “1-LEVEL” appears on the display. 2 Press V / v repeatedly to select “5-AUDIO”.
59 GB Other Operations You can listen to the sound from the component connected through the DIGITAL MEDIA PORT adapter to the DMPORT jack on the receiver. You can also view the images on the TV screen by connecting the video output of the DIGITAL MEDIA PORT adapter to the video input of the TV.
60 GB 1 Press DMPORT. You can also use the INPUT SELECTOR on the receiver to select “DMPORT”. 2 Start playback of the connected component. The sound is played back on the receiver and the image appears on the TV. For details, refer to the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
61 GB Using the Remote Changing button assignments You can change the factory settings of the input buttons to suit the components in your system. For example, if you connect a DVD recorder to the VIDEO 1 jacks on the receiver, you can set the VIDEO 1 button on this remote to control the DVD recorder.
62 GB Glossar y x Cinema Studio EX A surround sound mode that can be regarded as the compilation of Digital Cinema Sound technology, delivers the sound of a dubbing theater using three technologies: “Virtual Multi Dimensions”, “Screen Depth Matching”, and “Cinema Studio Reverberation”.
63 GB Additional Inf ormation x HDMI (High-Definition Multimedia Interface) HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound.
64 GB On placement • Place the receiv er in a location with adequate ventilation to pre vent heat b uildup and prolong the life of the receiv er . • Do not place the receiv er near heat sources, or in a place subject to direct sunlight, excessi ve dust, or mechanical shock.
65 GB Additional Inf ormation T roubleshooting If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Au di o There is no sound, no matter which component is selected, or only a very low-level sound is heard.
66 GB The surround effect cannot be obtained. • Make sure you have selected a sound field with MOVIE or MUSIC button. • Sound fields do not function for signals with a sampling frequency of more than 48 kHz. Dolby Digital or DTS multi channel sound is not reproduced.
67 GB Additional Inf ormation No sound is output from the receiver and TV speaker while using the System Audio Control function. • Make sure the TV is compatible with the System Audio Control function.
68 GB Remote control The remote does not function. • For receiver operation, you can only use the DISPLAY button when the TUNER input is selected. • Point the remote at the remote sensor on the receiver. • Remove any obstacles in the path between the remote and the receiver.
69 GB Additional Inf ormation Specifications Amplifier section Power Output 1) Stereo mode (rated) 1 08 W + 108 W (3 ohms at 1 kHz, THD 1%) Surround mode (reference) RMS Output (3 ohms at 1 kHz, THD 10%) FRONT 2) : 143 W/ch CENTER 2) : 143 W SUR 2) : 143 W/ch (1.
70 GB Speaker section HT -SF1300 only • Front speaker (SS-MSP23F) • Surround speaker (SS-SRP23F) • Center speaker (SS-CNP23) Front/Center speaker Full range, magnetically shielded Surround speak.
71 GB Additional Inf ormation Supplied speakers Front speakers (2) Center speaker (1) Surround speakers (2) Subwoofer (1) Supplied accessories Operating Instruction (this manual) Quick Setup Guide (1).
(1) Sony Corporation Printed in Malaysia Index Numerics 2 channel 46 2CH STEREO 46 5.1 channel 11 A A UTO CALIBRA TION 23 A UTO FORMA T DIRECT (A.F .D.
Ein wichtiger Punkt beim Kauf des Geräts Sony HT-SF1300 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony HT-SF1300 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony HT-SF1300 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony HT-SF1300 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony HT-SF1300 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony HT-SF1300 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony HT-SF1300 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony HT-SF1300. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony HT-SF1300 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
