Benutzeranleitung / Produktwartung CPD-E400E des Produzenten Sony
Zur Seite of 48
CHASSIS SERVICE MANUAL SPECIFICATIONS CPD-E400/E400E F99 CPD-E400 US Model Canadian Model Chassis No. SCC-L30K-A CPD-E400E AEP Model Chassis No. SCC-L30K-A TRINITRON ® COLOR COMPUTER DISPLAY CRT 0.24 mm aperture grille pitch (center) 19 inches measured diagonally 90-degree deflection FD Trinitron Viewable image size Approx.
CPD-E400/E400E – 2 – LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part hav- ing a return to chassis, must not exceed 0.5 mA (500 microam- peres). Leakage current can be measured by any one of three methods.
CPD-E400/E400E – 3 – POWER SAVING FUNCTION DIAGNOSIS This monitor meets the power-saving guidelines set by VESA, E NERGY S TAR, and NUTEK. If the monitor is connected to a computer or video graphi.
CPD-E400/E400E – 4 – TIMING SPECIFICATION MODE AT PRODUCTION MODE 1 MODE 2 RESOLUTION 738 X 414 1600 X 1200 CLOCK 28.322 MHz 202.500 MHz HORIZONTAL H-FREQ 31.469 kHz 93.750 kHz usec usec H. TOTAL 31.777 10.667 H. BLK 5.720 2.765 H. FP 0.318 0.316 H.
CPD-E400/E400E – 5 – TABLE OF CONTENTS Section Title Page 1. GENERAL ................................................................. 1- 1 2. DISASSEMBLY 2-1. Cabinet Removal ................................................ 2-1 2-2. Shield (EMI, Video), Side Cover (L and R) Removal .
SECTION 1 GENERAL The operating instructions mentioned here are partial abstracts from the Operating Instruction Manual. The page numbers of the Operating Instruction Manual remain as in the manual. 1-1 4 Precautions Warning on power connections • Use the supplied power cord.
1-2 6 Setup Before using your monitor, check that the following accessories are included in your carton: • Power cord • Current G3 adapter (for beige system) (1) • Setup Disk (1) • Warranty ca.
1-3 8 Selecting the on-screen menu language (LANG) English, French, German, Spanish, Italian, Dutch, Swedish, Russian and Japanese versions of the on-screen menus are available. The default setting is English. 1 Press the center of the control button.
1-4 10 Adjusting the brightness and contrast Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals. 1 Move the control button in any direction. The BRIGHTNESS/CONTRAST menu appears on the screen.
1-5 12 Adjusting the con vergence (CONV) The CONV settings allow you to adjust the quality of the picture by controlling the convergence. The convergence refers to the alignment of the red, green, and blue color signals. If you see red or blue shadows around letters or lines, adjust the convergence.
1-6 14 THIN HORIZONTAL LINE The lines that appear on your screen are damper wires. See page 15 for more information about the damper wires. DISTORTED SHAPE If the shape of the picture on the screen seems distorted, try adjusting the picture’s geometry.
1-7 16 T rouble symptoms and remedies If the problem is caused by the connected computer or other equipment, please refer to the connected equipment’s instruction ma nual. Use the self-diagnosis function (page 18) if the following recommendations do not resolve the problem.
1-8 18 Self-diagnosis function This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. If the 1 (power) indicator is lit in orange, the computer is in power saving mode.
CPD-E400/E400E 2-1. CABINET REMOVAL SECTION 2 DISASSEMBLY 2-2. SHIELD (EMI, VIDEO), SIDE COVER (L and R) REMOVAL 2-1 Bezel assembly 1 3 Cabinet Push in the tip of a screwdriver about 5mm to unlock the two claws.
CPD-E400/E400E 2-3. A BOARD REMOVAL 2-4. REAR SHIELD COMPLETE ASSY, D BOARD REMOVAL 2-2 3 Three screws (+BVTT 3 x 8) 4 A board CN306 CN311 CN303 CN309 CN305 1 Screw (+BVTT 4 x 8) 2 Cable stopper 5 Three screws (+BVTT 3 x 8) CN601 CN600 CN303 8 D board N board 6 Screw (+P 3.
CPD-E400/E400E 2-6. H BOARD REMOVAL 2-5. SERVICE POSITION 2-3 AC inlet D board A board 1 2 3 Four screws (Tapping screw (5)) H board Two screws (+ BVTP 4 x 16) Bezel assembl y Two H printed circuit bo.
CPD-E400/E400E 2-7. PICTURE TUBE REMOVAL 2-4 CN11 CN801 CN1 2pin 4 Four screws (Tapping screw (5)) 3 Three connectors 7 Neck assembly 1 Anode cap 2 A board 8 Deflection yoke 6 Picture tube 5 Bezel ass.
CPD-E400/E400E 2-8. HARNESS LOCATION 2-5 CN603 CN501 CN600 H board Degaussing coil N board FBT A board Picture tube Rear shield Side cover (L) CN11 CN2001 CN1 CN702 CN701 CN904 CN601 CN315 CN309 CN301.
CPD-E400/E400E Part Replaced ( ] ) D Board T901(FBT), IC901, R924, R925, RV901 • Mounted D board D Board T901(FBT), R917, R918, R923, R920, R919, R1004, C920, D911, R912, • Mounted D board D Board R933, R932, R921, R1006, D915, D917, IC901, T901(FBT) • Mounted D board b) High Voltage Hold-Down Function Check 1) Apply the voltage 21.
CPD-E400/E400E SECTION 4 ADJUSTMENTS 4-1 • Landing Rough Adjustment 1. Enter the full white signal. (or the full black dots signal). 2. Adjust the contrast to the maximum. 3. Make the screen monogreen. Note: Off the outputs from R ch and B ch of SG.
CPD-E400/E400E Connect the communication cable of the computer to the connector located on the D board on the monitor. Run the service software and then follow the instruction. IBM AT Computer as a Jig 1-690-391-21 1 A-1500-819-A Interface Unit 2 *The parts above ( ) are necessary for DAS adjustment.
5-1 5-2 SECTION 5 DIAGRAMS 5-1. BLOCK DIAGRAMS 3 1 4 7 5 BP CLP C BLK C SYNC H SYNC V SYNC CN309 2 6 4 8 9 BLUE1 RED1 GREEN1 VD1 HD1 CN313 2 3 DDC SCL DDC SDA 2 3 DDC SCL DDC SDA CN310 CN311 8 6 1 2 4.
5-3 5-4 + – 4 3 TXD RXD CN1001 TO ECS 1 3 4 7 5 22 28 30 20 44 45 53 50 49 48 47 46 36 37 27 26 32 34 33 25 15 51 52 39 38 54 2 3 C BLK BP CLP C SYNC H SYNC V SYNC CLAMP OUT C SYNCI H SYNCI1 V SYNCI1 P3.
5-5 5-6 5-2. FRAME SCHEMATIC DIAGRAM 5-3. CIRCUIT BOARDS LOCATION D A H N H KB KG KR G1 G2 GM G4 RCV HV 1 2 3 4 1 2 3 4 5 6 1 2 3 4 5 6 7 8 9 1 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 1 2 3 4 1 2 3 4 5 6 7 1 2 .
Note: • All capacitors are in µ F unless otherwise noted. (pF: µµ F) Capacitors without voltage indication are all 50 V. • Indication of resistance, which does not have one for rating electrical power, is as follows. Pitch: 5 mm Rating electrical power 1/4 W (CHIP : 1/10 W) • All resistors are in ohms.
5-9 5-10 (1) Schematic Diagram of A Board 1234 56 7 8 9 10 11 12 13 14 A B C D E F G H I 4.16 Vp-p (H) 4.16 Vp-p (H) 4.08 Vp-p (H) 49.8 Vp-p (H) 49.8 Vp-p (H) 48.8 Vp-p (H) 49.8 Vp-p (H) 49.8 Vp-p (H) 48.8 Vp-p (H) 1.78 Vp-p (8 MHz) 1 23 4 56 7 8 9 0 • A BOARD WAVEFORMS 4.
5-11 5-12 (2) Schematic Diagrams of D ( a , b , c ) Board 1234 56 7 8 9 10 11 12 13 14 1 A B C D E F G H I Schematic diagram Ò A A A A A board Schematic diagram D D D D D - a board l • Divided circuit diagram One sheet of D board circuit diagram is divided into three sheets, each having the code D- a to D- c .
12 3456 7 8 9 10 11 12 13 14 A B C D E F G H I 5-14 5-13 • Divided circuit diagram One sheet of D board circuit diagram is divided into three sheets, each having the code D- a to D- c . For example , the destination ab1 on the code D- a sheet is connected to ab1 on the D- b sheet.
5-15 5-16 12 3456 7 89 1 0 A B C D E F G H I Schematic diagram D D D D D - c board l Schematic diagram Ò D D D D D - b board • Divided circuit diagram One sheet of D board circuit diagram is divided into three sheets, each having the code D- a to D- c .
5-17 5-18 — D BOARD — D µ -COM, CY, DEFLECTION, POWER, H DEF, HV 12345 67 A B C D E NO TE: The circuit indicated as left contains high voltage of over 600 Vp-p.
1234 56 7 8 9 10 11 12 13 14 A B C D E F G H I 5-20 5-19 Schematic diagrams N N N N N , H H H H H boards l N DSP H USER CONTROL (3) Schematic Diagrams of N, H Boards — N BOARD (Conductor Side) — .
CPD-E400/E400E 2SA1175-HFE 2SA1309A-QRSTA 2SC2459-GR-TPE4 2SC2784 2SC2785-HFE 2SC3311A-QRSTA 2SC3311A-RTA 2SC3209LK 2SC3209LK-TP 2SC3941A-Q (TA) 2SC5022-02 2SC5445 (LBSONY1) MC13289 PQ12RD8S PST574CMT-T1 STK391-110 TEA1504/N2 DTC143ESA DTC143ESA-TP PDTC114-EK-115 2SA1049-GR 2SA1049TP-GR E C B E LETTER SIDE C B E C B 5-21 5-5.
CPD-E400/E400E 5-22 2SK2098-01MR-F119 BT149G-412-OT359 TL1431CZ-AP DTZ-TT11-15B DTZ-4.7C MA111-(K8).S0 MA111-TX RD12SB2 RD5.6S-B UDZ-TE-17-12B UDZ-TE-17-15B UDZ-TE-17-4.7B UDZ-TE-17-5.6B D10SC9M G D S ANODE CA THODE GA TE CA THODE ANODE D2L40-TA ERB38-06V1 HSS82 MTZJ-T-77-18 MTZJ-T-77-5.
CPD-E400/E400E • Items marked " * " are not stocked since they are seldom required for routine service. Some delay should be anticipated when ordering these items. • Items with no part number and no description are not stocked because they are seldom required for routine service.
CPD-E400/E400E 6-2. PICTURE TUBE z 7-685-881-09 +BVTT 4X8 s 7-685-663-71 +BVTP 4X16 7-685-882-09 +BVTT 4X10 REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 6-2 The components identified ! marked are critical for safety. Replace only with the part number specified.
CPD-E400/E400E 6-3. PACKING MATERIALS REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK 6-3 The components identified ! marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ! sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
REF.NO. PART NO. DESCRIPTION REMARK REF.NO. PART NO. DESCRIPTION REMARK The components identified ¡ marked are critical for safety. Replace only with the part number specified. Les composants identifiés par la marque ¡ sont critiques pour la sécurité.
Ein wichtiger Punkt beim Kauf des Geräts Sony CPD-E400E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony CPD-E400E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony CPD-E400E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony CPD-E400E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony CPD-E400E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony CPD-E400E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony CPD-E400E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony CPD-E400E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony CPD-E400E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
