Benutzeranleitung / Produktwartung CFD-S35CP des Produzenten Sony
Zur Seite of 36
2-548-054- 15 (1) ©2005 Sony Corporation CD Radio Cassette-Cor der Operating Instructions CFD-S35CP.
2 WARNING To prevent fire or shock hazard, do not expose the player to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. WARNING Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
3 T able of contents Basic Operations Playing an audio CD or MP3 files .................. 4 Listening to the radio ...................................... 8 Playing a tape ............................................... 10 Recording on a tape .........
4 Playing an audio CD or MP3 files Connect the supplied mains lead (see page 23). 1 Press CD. (On the remote, press OPERATE (POWER, see page 2) and then press FUNCTION repeatedly until "CD" appears in the display.) 2 Press Z PUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment.
Basic Operations 5 Display Playing time Track number To Press adjust the volume VOLUME +*, – (VOL +*, – on the remote.) stop playback x pause playback u * ( X on the remote) Press the button again to resume play after pause. go to the next track > go back to the previous track .
6 Note Before playing a file, this player reads all file and folder information on the CD. Depending on the file structure, it may take more than a minute to read them. During this time, “READING” is displayed. Tip You can use the buttons mentioned in the table on page 5 for additional operations in the same way as when playing an audio CD.
Basic Operations 7 Example of folder structure and playing order The playing order of the folders and files is as follows: Notes •A folder that does not include an MP3 file is skipped. • Maximum number of folders: 255 Maximum number of files: 255 • Folder names and file names can be displayed with up to 64 characters.
8 Listening to the radio Connect the supplied mains lead (see page 23). 1 Press RADIO BAND•AUTO PRESET (BAND on the remote) until the band you want appears in the display.
Basic Operations 9 Use these buttons for additional operations Tip If the FM broadcast is noisy, press MODE until “Mono” appears in the display and radio will play in monaural. To Press adjust the volume VOLUME +*, – turn on/off the radio OPERATE (or POWER, see page 2) *VOLUME + (VOL + on the remote) has a tactile dot.
10 Playing a tape 2 3 Display Connect the supplied mains lead (see page 23). 1 Press TAPE. 2 Press xZ to open the tape compartment and insert a recorded tape. Use TYPE I (normal) tape only. Close the compartment. 3 Press n *. The player starts playing.
Basic Operations 11 Use these buttons for additional operations To Press adjust the volume VOLUME +*, – stop playback xZ fast-forward or rewind m or M pause playback X Press the button again to resume play after pause.
12 Connect the supplied mains lead (see page 23). 1 Press xZ to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. Close the compartment. 2 Select the programme source you want to record. To record from the CD player, insert a CD (see page 4) and press CD.
Basic Operations 13 To Press stop recording xZ pause recording X Press the button again to resume recording. turn on/off the player OPERATE (or POWER, see page 2) 3 Press z to start recording ( n is depressed automatically).
14 The CD Player Using the display You can check information about the CD using the display. DISP/ENT/MEMORY Total playing time Total track number Total track number Total folder number t Checking the information of an audio CD To check the total track number and playing time of the CD While the CD is stopped, you can check them in the display.
15 The CD Player Locating a specific track You can quickly locate any track on a CD using the number buttons on the remote. You can also find a specific point in a track while playing a CD.
16 Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or programme play modes. u 1 Press CD. “CD” appears in the display. 2 Proceed as follows. To repeat a single track all tracks on the CD a selected folder (MP3 CD only) tracks in random order REPEAT Do this 1 Press REPEAT until “REP 1” appears.
17 The CD Player Creating your own programme (Programme Play) You can arrange the playing order of up to 20 tracks or files on a CD. When playing an MP3 files, you can also programme up to 20 folders (Programme Folder Play). MODE 1 Press CD. “CD” appears in the display.
18 To change the current programme Press x once if the CD is stopped and twice if the CD is playing. The current programme will be erased. Then create a new programme following the programming procedure. Tips • You can play the same program again, since the programme is saved until you open the CD compartment.
The Radio 19 The Radio Presetting radio stations You can store radio stations into the player’s memory. You can preset up to 40 radio stations (European model), 20 for FM and 10 for MW and LW in any order or 30 radio stations (other models), 20 for FM and 10 for AM in any order.
20 Playing preset radio stations Once you’ve preset the stations, use the number buttons to tune in your favorite stations. 1 Press RADIO BAND•AUTO PRESET to select the band. 2 Press PRESET + or – to tune in the stored station. On the remote 1 Press BAND.
The Audio Emphasis 21 The Audio Emphasis Selecting the audio emphasis You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Selecting the sound characteristic Press SOUND repeatedly to select the audio emphasis you want.
22 The Timer Falling asleep to music You can set the player to turn off automatically after 10, 20, 30, 60, 90 and 120 minutes, allowing you to fall asleep while listening to music. 1 Play the music source you want. 2 Press SLEEP to display “SLEEP.” 3 Press SLEEP to select the minutes until the player goes off automatically.
Setting Up 23 1 Connecting the mains lead Insert one end of the supplied mains lead to the AC IN socket located at the rear of the player, and the other end to the mains. 2 Preparing the remote Insert two R03 (size AAA) batteries (not supplied). Setting Up Choosing the power sources You can use the mains or batteries as a power source.
24 Changing the AM/MW tuning interval If you need to change the AM/MW tuning interval, do the following: 1 Press RADIO BAND•AUTO PRESET until “AM” or “MW” is displayed. 2 Press DISP/ENT/MEMORY for 2 seconds. 3 Press RADIO BAND•AUTO PRESET for 2 seconds.
25 Side A Tab for side A Tab for side B • Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components.
26 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
27 The sound drops out. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged. • Place the player in a location free from vibration.
28 Tape Player The tape does not move when you press an operation button. • Close the cassette compartment securely. The z button does not function or the tape does not play or record. • Make sure the safety tab on the cassette is in place. The tape does not erase completely.
29 Maintenance Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation. Clean with a commercially available blower.
30 Specifications CD player section System Compact disc digital audio system Laser diode properties Material: GaAlAs Wave length: 780 nm Emission duration: Continuous Laser output: Less than 44.6 µW (This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture.
31 THE USABLE NUMBER OF FOLDERS/FILES • Maximum folder number: 255 • Maximum file number: 255 SETTINGS FOR COMPRESSION SOFTWARE AND WRITING SOFTWARE • To compress a source for an MP3 file, we recommend setting the transfer bit rate of the compression software to “44.
32 Index A Audio emphasis 21 B Batteries for player 23 for remote 23 C CD player 4 Choosing power sources 23 Cleaning cabinet 29 lens 29 tape heads and tape path 29 Connecting mains lead 23 Creating y.
33.
34.
35.
Sony Corporation.
Ein wichtiger Punkt beim Kauf des Geräts Sony CFD-S35CP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony CFD-S35CP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony CFD-S35CP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony CFD-S35CP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony CFD-S35CP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony CFD-S35CP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony CFD-S35CP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony CFD-S35CP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony CFD-S35CP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
