Benutzeranleitung / Produktwartung CFD-222 des Produzenten Sony
Zur Seite of 24
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 3-858-169- 12 (1) CD Radio Cassette-Cor der 1996 by Sony Corporation Operating Instructions CFD-222 CFD-DW222.
Introduction CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 2 Warning To prevent fire or shock hazard, do not expose the player to rain or moisture. This symbol is intended to alert the user to the presenc.
3 Introduction Basic Operations CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 T able of contents Basic Operations 4 Playing a CD 6 Listening to the radio 8 Playing a tape 10 Recording on a tape The CD Pla.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Basic Operations 4 Playing a CD Basic Operations Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to CD. 2 Press OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment.
Basic Operations Basic Operations 5 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Display Use these buttons for additional operations 4 Press ^ . The player plays all the tracks once. Playing time Track number = / + AMS/SEARCH VOLUME FUNCTION OPEN/CLOSE p ^ To Do this Adjust the volume Turn VOLUME.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Basic Operations 6 Listening to the radio Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to RADIO. 2 Set BAND to FM or AM. 3 Turn TUNING to tune in a radio station. If the received FM stereo is too weak, the reception becomes monaural.
Basic Operations Basic Operations 7 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Use these buttons for additional operations VOLUME FUNCTION To Do this Adjust the volume Turn VOLUME. Turn off the radio Set FUNCTION to TAPE (CD/RADIO OFF). To improve broadcast reception Reorient the antenna for FM.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Basic Operations 8 Playing a tape Connect the supplied AC power cord (see page 16). 1 Set FUNCTION to TAPE(CD/ RADIO OFF). 2 Press p6 to open the tape compartment on deck A or deck B and insert a recorded tape.
Basic Operations Basic Operations 9 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Use these buttons for additional operations To Do this Adjust the volume Turn VOLUME. Stop playback Press p6 Fast-forward or rewind the tape Press ) or 0 Pause playback Press P .
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Basic Operations 10 Connect the supplied AC power cord (see page 16). 1 Press p6 to open the tape compartment on deck B and insert a blank tape. Use TYPE I (normal) tape only. 2 Select the program source you want to record.
Basic Operations Basic Operations 11 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Deck B Deck A Use these buttons for additional operations 3 Start recording. To record from the CD player or the radio, press r on deck B ( ( is depressed automatically.) To record from the tape, press P and ( on deck A.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 The CD Player 12 Using the display You can check information about the CD using the display. The CD Player Checking the total track numbers and playing time Press DISPLAY/ENT in stop mode. Total playing time Total track numbers Checking the remaining time Press DISPLAY/ENT while playing a CD.
13 The CD Player CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 The CD Player Locating a specific point in a track You can locate a specific point in a track while playing a CD using + or = AMS/SEARCH. To locate Press a point while listening to + (forward) or = the sound (backward) AMS/SEARCH while playing and hold down until you find the point.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 The CD Player 14 Playing tracks repeatedly (Repeat Play) You can play tracks repeatedly in normal, shuffle or program play modes (see page 15 ). 1 Set FUNCTION to CD. 2 Press PLAY MODE until the repeat mode you want appears in the display.
15 The CD Player CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 The CD Player Creating your own pr ogram (Program Play) You can arrange the playing order of the tracks on a CD. Tips • You can play the same program again, since the program is saved until you open the CD compartment or switch FUNCTION.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Setting Up 16 Choosing the power sources You can use the AC power or batteries as a power source. Use the AC power source whenever you record since recording consumes much power.
17 CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Setting Up Setting Up Adjusting the sound emphasis (TONE/MEGA BASS) You can adjust the tone and reinforce the bass sound. Adjusting the tone Turn TONE. Turn the control clockwise to enhance the high tone and counterclockwise to enhance the low tone.
Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 18 Pr ecautions Additional Information On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.
19 Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Notes on CDs • Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.
Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 20 T r oubleshooting General Symptom The power does not come on. There is no audio. The audio is weak or has poor quality. The picture of your TV becomes unstable. The CD does not play/“00 -- --” lights in the display even when a CD is in place.
21 Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Symptom The tape does not record. The audio is weak/The audio quality is poor. The sound is distorted. Remedy • Make sure the tape is inserted properly. • Make sure the safety tab of the cassette is in place.
Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 22 Cleaning the lens If the lens becomes dirty, it may cause a skipping of sound during CD operation.
23 Additional Information CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION With 4-ohm loads, both channels driven from 150 - 10,000 Hz; rated 2 W per channel- minimum RMS power, with no more than 10 % total harmonic distortion in AC operation.
CFD-222/DW222.E._3-858-169-1X.U/CA/AU/E92 Sony Corporation Printed in China Index A Adjusting sound emphasis 17 tone 17 B Batteries for player 16 C CD player 12 Choosing power sources 16 Cleaning cabi.
Ein wichtiger Punkt beim Kauf des Geräts Sony CFD-222 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony CFD-222 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony CFD-222 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony CFD-222 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony CFD-222 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony CFD-222 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony CFD-222 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony CFD-222. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony CFD-222 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
