Benutzeranleitung / Produktwartung CCD-TR3400 des Produzenten Sony
Zur Seite of 96
CCD-TR3400 3-859-084- 22 (1) ©1996 by Sony Corporation 3-859-084- 22 (1) V ideo Camera Recor der Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s record The model and serial numbers are located on the bottom.
2 CCD-TR3400 3-859-084- 22 (1) Welcome! Congratulations on your purchase of this Sony Handycam ® camcorder. With your Handycam, you can capture life’s precious moments with superior picture and sound quality. Your Handycam is loaded with advanced features, but at the same time it is very easy to use.
3 CCD-TR3400 3-859-084- 22 (1) T able of contents Before you begin Using this manual .................................. 4 Checking supplied accessories ............. 5 Getting started Charging and installing the battery pack ..........................
4 CCD-TR3400 3-859-084- 22 (1) Using this manual Before you begin As you read through this manual, buttons and settings on the camcorder are shown in capital letters. e.g. Set the POWER switch to CAMERA. As indicated with ≥ in the illustrations, you can hear the beep sound to confirm your operation.
5 Before you begin CCD-TR3400 3-859-084- 22 (1) Checking supplied accessories 1 2 Check that the following accessories are supplied with your camcorder. 9 1 Wireless Remote Commander (1) (p.90) 2 NP-F530 Battery pack (1) (p.6) 3 AC-V316 or AC-V316A AC power adaptor (1) (p.
6 CCD-TR3400 3-859-084- 22 (1) Charging and installing the battery pack Before using your camcorder, you first need to charge and install the battery pack. To charge the battery pack, use the supplied AC power adaptor. This camcorder operates with the “InfoLITHIUM” battery.
7 Getting started CCD-TR3400 3-859-084- 22 (1) Battery life Battery pack NP-F530 (supplied) NP-F730 NP-F930 Continuous recording time 1) 110 (100) 250 (225) 400 (360) (min.) Typical recordng time 2) 65 (60) 150 (135) 225 (200) (min.) The available time for a fully charged battery is indicated outside parentheses.
8 CCD-TR3400 3-859-084- 22 (1) Installing the battery pack Align the grooves of the battery pack with the receptacles of the camcorder and slide the battery pack down until it catches on the battery release lever and clicks. Make sure the battery pack is installed securely.
9 Getting started CCD-TR3400 3-859-084- 22 (1) PUSH Inserting a cassette Make sure that the power source is installed. When you want to record in the Hi8 system, use Hi8 video cassette H . ( 1 ) While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow.
10 CCD-TR3400 3-859-084- 22 (1) Make sure that the power source is installed and a cassette is inserted. Before you record one-time events, you may want to make a trial recording to make sure that the camcorder is working correctly.
11 Basic operations CCD-TR3400 3-859-084- 22 (1) L S T A N D B Y O C K L S T A N D B Y O C K To stop recording momentarily [a] Press START/STOP again. The “STBY” indicator appears in the viewfinder (Standby mode ). To finish recording [b] Press START/STOP again.
12 CCD-TR3400 3-859-084- 22 (1) Camera recording Using the zoom feature Zooming is a recording technique that lets you change the size of the subject in the scene.
13 Basic operations CCD-TR3400 3-859-084- 22 (1) Hints for better shooting [a] 2 3 1 [c] [e] [d] For hand-held shots, you’ll get better results by holding the camcorder according to the following suggestions: • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb [ a ] .
14 CCD-TR3400 3-859-084- 22 (1) Checking the recor ded picture Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder. ( 1 ) While pressing the small green button on the POWER switch, set it to CAMERA.
15 Basic operations CCD-TR3400 3-859-084- 22 (1) Connections for playback Connect the camcorder to your VCR or TV to watch the playback picture on the TV screen.
16 CCD-TR3400 3-859-084- 22 (1) You can monitor the playback picture in the viewfinder. You can also monitor a picture on a TV screen, after connecting the camcorder to a TV or VCR. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR.
17 Basic operations CCD-TR3400 3-859-084- 22 (1) Playing back a tape Various playback modes To view a still picture (playback pause) Press P during playback. To resume playback, press P or · . To locate a scene (picture search) Keep pressing 0 or ) during playback.
18 CCD-TR3400 3-859-084- 22 (1) DATA CODE JUL. 4 1997 5:30:00 PM DATE JUL. 4 1997 TIME 5:30:00 PM JUL.04.97 5:30:00 PM Displaying the date or time when you recorded – data code funct.
19 Advanced operations CCD-TR3400 3-859-084- 22 (1) Using alter native power sour ces Advanced operations You can choose any of the following power sources for your camcorder: battery pack, alkaline battery, house current and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder.
20 CCD-TR3400 3-859-084- 22 (1) Using alternative power sources Using alkaline batteries Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not supplied).
21 Advanced operations CCD-TR3400 3-859-084- 22 (1) Changing the mode settings You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder. ( 1 ) Press MENU to display the menu. ( 2 ) Turn the control dial so that the desired item is highlighted white.
22 CCD-TR3400 3-859-084- 22 (1) Changing the mode settings BEEP <ON/OFF> • Select ON so that beeps sound when you start/stop recording, etc. • Select OFF when you do not want to hear the beep sound. VF BRIGHT* Select this item to adjust the brightness of the viewfinder.
23 Advanced operations CCD-TR3400 3-859-084- 22 (1) Items for VTR mode only EDIT <ON/OFF> • Select ON to minimize picture deterioration when editing. • Normally select OFF. HiFi SOUND <STEREO/1/2> • Normally select STEREO. • Select 1 or 2 to play back a dual sound track tape.
24 CCD-TR3400 3-859-084- 22 (1) Recor ding with the date or time Before you start recording or during recording, press DATE or TIME. You can record the date or time displayed in the viewfinder with the picture. You cannot record the date and time at the same time.
25 Advanced operations CCD-TR3400 3-859-084- 22 (1) Fade-in and fade-out You can fade in or out to give your recording a professional appearance. When fading in, the picture gradually fades in from black or mosaic while the sound increases. When fading out, the picture gradually fades to black or mosaic while the sound decreases.
26 CCD-TR3400 3-859-084- 22 (1) When you switch from one scene to another, you can overlap the two pictures. With this function, the first scene turns to the second one gradually. You can hear the sound of the second scene gradually as you start recording the second scene.
27 Advanced operations CCD-TR3400 3-859-084- 22 (1) When you switch from one scene to another, you can wipe away the still picture. With this function, the first still picture is wiped away from the center to reveal the moving picture underneath. You can hear the sound of the second scene as you start recording the second scene.
28 CCD-TR3400 3-859-084- 22 (1) Enjoying pictur e effect Selecting picture effect You can make pictures like those of television with the Picture Effect function. MOSAIC [a] The picture is mosaic. SOLARIZE [b] The light intensity is more clear, and the picture looks like an illustration.
29 Advanced operations CCD-TR3400 3-859-084- 22 (1) Using picture effect function ( 1 ) Press PICTURE EFFECT. ( 2 ) Turn the control dial to select the desired picture effect mode. To turn off picture effect Press PICTURE EFFECT to turn off the picture effect indicator.
30 CCD-TR3400 3-859-084- 22 (1) You can record a still picture like those of still camera or shoot a moving picture with superimposing a still picture while the sound is recorded normally. ( 1 ) Press DIGITAL EFFECT and turn the control dial to select the still indicator.
31 Advanced operations CCD-TR3400 3-859-084- 22 (1) Recor ding still pictur es successively Using the Flash motion function, you can record still pictures successively at constant intervals. You can select intervals by adjusting the flash bars with the control dial.
32 CCD-TR3400 3-859-084- 22 (1) Using the Luminancekey function, you can replace a brighter color scheme portion of a still picture by a moving picture. For example, you can superimpose the favorite scene on the background if you store the picture in memory as a still picture, such as a person in the bright background .
33 Advanced operations CCD-TR3400 3-859-084- 22 (1) You can insert a scene in the middle of a recorded tape by setting the starting and ending points. The previous recorded portion will be erased. If the RC time code appears in the viewfinder, set COUNTER to NORMAL in the menu system to display the tape counter.
34 CCD-TR3400 3-859-084- 22 (1) Using the wide mode function Selecting the desired mode You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 FULL). CINEMA Black bands appear at the top and the bottom of the screen, and the viewfinder [ a ] and a normal TV screen [ b ] look wide.
35 Advanced operations CCD-TR3400 3-859-084- 22 (1) To cancel wide mode Press 16:9WIDE repeatedly until the wide mode indicator disappears. To watch the tape recorded in wide mode To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen TV to zoom mode.
36 CCD-TR3400 3-859-084- 22 (1) Selecting the ST ART/STOP mode Your camcorder has two modes besides normal start/stop mode. These modes enable you to take a series of quick shots resulting in a lively video. ( 1 ) Set the START/STOP MODE switch to the desired mode.
37 Advanced operations CCD-TR3400 3-859-084- 22 (1) Superimposing a title You can select one of eight preset titles. You can also select the language, position, and color of titles in the menu system. Selecting the language ( 1 ) While the camcorder is in Standby mode, press MENU to display the menu.
38 CCD-TR3400 3-859-084- 22 (1) Using titles To add the title from the beginning ( 1 ) While the camcorder is in Standby mode, press TITLE repeatedly until the desired title appears. Each time a new title appears, it flashes. When the desired title appears, wait for it to stop flashing.
39 Advanced operations CCD-TR3400 3-859-084- 22 (1) To select the color of the title ( 1 ) While in Standby mode, press MENU to display the menu. ( 2 ) Turn the control dial to select TITLE COL and press the control dial to select it. The color menu appears.
40 CCD-TR3400 3-859-084- 22 (1) You can make up to two titles and store them in the camcorder. Eject the cassette before you begin. Your title can have up to 22 letters. ( 1 ) While in Standby mode, press MENU to display the menu. ( 2 ) Turn the control dial to select TITLE 1 SET or TITLE 2 SET, then press the dial.
41 Advanced operations CCD-TR3400 3-859-084- 22 (1) L S T A N D B Y O C K 2 3 ORC START/STOP KEY 1 MENU MENU WIND COMMANDER Hi8 COUNTER ORC TO SET TITLE COL TITLE POS [MENU] : END =ORC STBY= == ORC ⁄ == == STBY == Use this feature to check the tape condition before recording, so that you can get the best possible picture.
42 CCD-TR3400 3-859-084- 22 (1) When you shoot, the indicator appears in the viewfinder. This indicates that the Steady Shot function is working and the camcorder compensates for camera-shake. Set STEADY SHOT to OFF. Releasing the STEADY SHOT function To activate the Steady Shot function again Set STEADY SHOT to ON.
43 Advanced operations CCD-TR3400 3-859-084- 22 (1) The camcorder’s automatic functions offer you worry-free operation under most shooting conditions. But in some circumstances, manual adjustment is better for creative recording. You can adjust focus, aperture, shutter speed, gain, and white balance automatically or manually.
44 CCD-TR3400 3-859-084- 22 (1) Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually.
45 Advanced operations CCD-TR3400 3-859-084- 22 (1) To return to autofocus mode Set FOCUS to AUTO. The f indicator in the viewfinder disappears. Shooting in relatively dark places Shoot at wide-angle after focusing in the telephoto position. Note on the focus ring The focus ring does not have a stop position.
46 CCD-TR3400 3-859-084- 22 (1) AE A AE S PROGRAM AE AE A AE S AUTO LOCK HOLD Using the PROGRAM AE function About the PROGRAM AE function You can select from three PROGRAM AE modes to fit the shooting situation. Set AUTO LOCK/HOLD to the center position.
47 Advanced operations CCD-TR3400 3-859-084- 22 (1) Using the PROGRAM AE Function To return to automatic adjustment mode Set AUTO LOCK/HOLD to AUTO LOCK, or press PROGRAM AE so that no indicator appears in the viewfinder.
48 CCD-TR3400 3-859-084- 22 (1) When shooting a very bright subject A vertical band (smear) may appear on the screen if the shutter speed is set too high.
49 Advanced operations CCD-TR3400 3-859-084- 22 (1) Using manual mode The manual mode features an advanced recording technique by controlling the exposure with a combination of adjustments of the aperture value, shutter speed and gain level.
50 CCD-TR3400 3-859-084- 22 (1) 2 1 3 IRIS SHUTTER SPEED GAIN 60 F8 0 dB F8 0 dB 60 AUTO LOCK HOLD GAIN IRIS SHTR Shooting in manual mode In manual mode, you can adjust the aperture, shutter speed and gain independently. Use the graph on page 53 for your reference to set a value of each item.
51 Advanced operations CCD-TR3400 3-859-084- 22 (1) To adjust the gain You can select the gain from the following 8 levels: –3 dB, 0 dB, +3 dB, +6 dB, +9 dB, +12 dB, +15 dB, +18 dB. To increase the gain to brighten the picture, select a higher level.
52 CCD-TR3400 3-859-084- 22 (1) 1 2 3 SHUTTER SPEED 60 60 AUTO LOCK HOLD SHTR If you want to record a dark picture brightly, or represent the movement of the subject lively, set the shutter speed to 1/30, 1/15, 1/8 or 1/4 (Slow shutter). ( 1 ) Set AUTO LOCK/HOLD to the center position.
53 Advanced operations CCD-TR3400 3-859-084- 22 (1) When you shoot in manual adjustment mode, we recommend you to keep the exposure fixed to make a clear picture. This section shows you what the exposure is and how to adjust each item with the exposure fixed.
54 CCD-TR3400 3-859-084- 22 (1) Creating a desired picture without changing the exposure When the aperture value is F11, the shutter speed is 1/60, and the gain level is 0 dB, adjust the aperture value manually to F5.6, as an example. If you change the aperture value from F11 to F5.
55 Advanced operations CCD-TR3400 3-859-084- 22 (1) When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears in the viewfinder. [a] Subject is too dark because of backlight.
56 CCD-TR3400 3-859-084- 22 (1) When you shoot in a snowfield or on a beach in the mid-summer and the subject may become dark because of the extreme brightness, you can change the brightness of the picture in the menu system. You can also use this function when the subject is too bright — subjects on stages, night views, etc.
57 Advanced operations CCD-TR3400 3-859-084- 22 (1) Adjusting the white balance White balance is the adjustment to make white subjects look white and to obtain a more natural color balance.
58 CCD-TR3400 3-859-084- 22 (1) 3 1 2 WHT BAL WHT BAL e WHT BAL w WHT BAL ∑ e w ∑ AUTO LOCK HOLD Setting the white balance mode ( 1 ) Set AUTO LOCK/HOLD to the center position. ( 2 ) Press WHT BAL so that the white balance indicator appears in the viewfinder.
59 Advanced operations CCD-TR3400 3-859-084- 22 (1) 2 4 1 3 WHT BAL AUTO LOCK HOLD ∑ ( 1 ) Set AUTO LOCK/HOLD to the center position. ( 2 ) Press WHT BAL, then turn the control dial to select one push white balance indicator.
60 CCD-TR3400 3-859-084- 22 (1) 1 REW FF # ) 3 0 3 2 DATE SEARCH DATE INDEX SEARCH OFF POWER CAMERA VTR JUL. 4 1997 JUL. 3 1997 JUL. 7 1997 [a] [b] [c] DATE SEARCH Searching the boundaries of r .
61 Advanced Operations CCD-TR3400 3-859-084- 22 (1) REW 3 0 0:00:00 3 1 4 2 0:12:34 ZERO MEM STOP ZERO MEM COUNTER RESET Notes on Date Search and Date Scan mode • If a day’s recording is not longer than 2 minutes, the camcorder may not accurately find its boundaries.
62 CCD-TR3400 3-859-084- 22 (1) Locating the marking position You can locate the beginning of a desired program easily by marking an index signal during recording or playback and searching for it later. Marking an index signal You can mark an index signal during recording or playback.
63 Advanced Operations CCD-TR3400 3-859-084- 22 (1) Scanning the beginning of each marking position – index scan Use the Remote Commander. To view the picture on a TV, press DISPLAY. ( 1 ) Press INDEX on the Remote Commander during normal playback. ( 2 ) Press 0 or ) .
64 CCD-TR3400 3-859-084- 22 (1) Locating the desired marking position – index search ( 1 ) Press INDEX on the Remote Commander during stop or playback mode. ( 2 ) Press INDEX repeatedly until the index number of the desired program is displayed in the viewfinder.
65 Advanced Operations CCD-TR3400 3-859-084- 22 (1) Erasing an index signal ( 1 ) Locate the index signal to be erased using the index scan or index search function. ( 2 ) Press INDEX ERASE on the Remote Commander within 2 to 10 seconds while the desired program plays back.
66 CCD-TR3400 3-859-084- 22 (1) You can write the RC time code on a recorded tape. Use the Remote Commander. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR. ( 2 ) Rewind the tape to the beginning and set the camcorder to playback pause mode.
67 Advanced Operations CCD-TR3400 3-859-084- 22 (1) 1 12 3 MENU EDIT OFF 2 ON OFF POWER CAMERA VTR MENU [MENU] : END Note on --:--:--:-- indicator The --:--:--:-- indicator appears during playback if: • nothing is recorded. • the RC time code is unreadable because of the damage of the tape or because of the noise.
68 CCD-TR3400 3-859-084- 22 (1) Starting editing ( 1 ) Insert a blank tape (or a tape you want to record over) into the VCR, and insert your recorded tape into the camcorder. ( 2 ) Play back the recorded tape on the camcorder until you locate the point where you want to start editing, then press P to set the camcorder in playback pause mode.
69 Advanced Operations CCD-TR3400 3-859-084- 22 (1) You can record a tape from another VCR or TV program from a TV that has audio/ video outputs. Connect the camcorder to the VCR or TV. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR.
70 CCD-TR3400 3-859-084- 22 (1) Replacing recording on a tape (insert editing) You can insert a new scene from a VCR onto your originally recorded tape by specifying starting and ending points. Connections are the same as in “Recording from a VCR or TV” on the previous page.
71 Additional information CCD-TR3400 3-859-084- 22 (1) Changing the lithium battery in the camcorder Your camcorder is supplied with a lithium battery installed. When the battery becomes weak or dead, the I indicator flashes in the viewfinder for about 5 seconds when you set the POWER switch to CAMERA.
72 CCD-TR3400 3-859-084- 22 (1) You can set the date and time in the menu system. ( 1 ) Press MENU to display the menu in the viewfinder. ( 2 ) Turn the control dial to highlight CLOCK SET, and press the control dial to select it. ( 3 ) Turn the control dial to adjust the year, and then press the control dial.
73 Additional information CCD-TR3400 3-859-084- 22 (1) Usable cassettes and playback modes Selecting cassette types This Hi8 system is an extension of the standard 8 mm system, and was developed for higher-quality pictures. You can use Hi8 video and standard 8 mm cassettes.
74 CCD-TR3400 3-859-084- 22 (1) Tips for using the battery pack This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned.
75 Additional information CCD-TR3400 3-859-084- 22 (1) Tips for using the battery pack The switch on the battery pack This switch is provided so that you can mark the charged battery pack. Set the switch to the “green mark” position when charging is completed.
76 CCD-TR3400 3-859-084- 22 (1) Tips for using the battery pack Why the remaining battery indication does not match the continuous recording time in the operation manual The recording time is affected by the environmental temperature and conditions. The recording time becomes very short in a cold environment.
77 Additional information CCD-TR3400 3-859-084- 22 (1) Notes on the battery case • Use only with alkaline batteries. You cannot use the battery case with manganese batteries or size AA (LR6) rechargeable NiCd batteries. • Using with Sony alkaline batteries is preferable.
78 CCD-TR3400 3-859-084- 22 (1) Video head cleaning To ensure normal recording and clear pictures, clean the video heads. When the v indicator and “ CLEANING CASSETTE” message appear one after another in the viewfinder or playback pictures are “noisy” or hardly visible, the video heads may be dirty.
79 Additional information CCD-TR3400 3-859-084- 22 (1) Camcorder care • When the camcorder is not to be used for a long time, disconnect the power source and remove the tape. Periodically turn on the power, operate the camera and player sections and play back a tape for about 3 minutes.
80 CCD-TR3400 3-859-084- 22 (1) Each country or area has its own electric and TV color systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 110 V to 240 V AC, 50/60 Hz.
81 Additional information CCD-TR3400 3-859-084- 22 (1) Cause and/or Corrective Action • The battery pack is not installed. m Install the battery pack. (p.8) • The battery is dead. m Use a charged battery pack. (p.6) • The AC power adaptor is not connected to a wall outlet.
82 CCD-TR3400 3-859-084- 22 (1) Cause and/or Corrective Action • The START/STOP MODE switch is set to 5 SEC or . m Set it to . (p.36) • The battery is dead. m Use a charged battery pack or the AC power adaptor. (p.6, 19) • Moisture condensation has occurred.
83 Additional information CCD-TR3400 3-859-084- 22 (1) Cause and/or Corrective Action • COMMANDER is set to OFF in the menu system. m Set it to ON. (p.21) • Something is blocking the infrared rays. m Remove the obstacle. • The batteries are not inserted with the correct polarity.
84 CCD-TR3400 3-859-084- 22 (1) Corrective Actions • Disconnect the power cord. After about 1 minute, reconnect the power cord. • See the following chart. Trouble check AC power adaptor Symptom The VTR/CAMERA or CHARGE lamp does not light. The CHARGE lamp flashes.
85 Additional information CCD-TR3400 3-859-084- 22 (1) Video input/output Phono jack, 1 Vp-p, 75 ohms, unbalanced Audio input/output Phono jacks (2: stereo L and R) Input: 327 mV, input impedance more than 47 kilohms Output: 327 mV, (at output impedance 47 kilohms) impedance less than 2.
86 CCD-TR3400 3-859-084- 22 (1) Identifying the parts 1 POWER switch (p.10) 2 STEADY SHOT switch (p.42) 3 MENU button (p.21) 4 Control dial (p.21) 5 PICTURE EFFECT button (p.29) 6 DIGITAL EFFECT button (p.30) 7 TITLE button (p.38) 8 16:9WIDE button (p.
87 Additional information CCD-TR3400 3-859-084- 22 (1) !• EJECT switch (p.9) !ª LANC l control jack l stands for Local Application Control Bus System. The l control jack is used for controlling the tape transport of video equipment and peripherals connected to it.
88 CCD-TR3400 3-859-084- 22 (1) #¢ FADER/OVERLAP button (p.25, 26, 27) #∞ BACK LIGHT button (p.55) #§ Display window (p.93) #¶ PUSH AUTO button (p.
89 Additional information CCD-TR3400 3-859-084- 22 (1) Identifying the parts $™ $º $¡ #ª $£ $¶ $• $ª %º % ¡ $¢ $§ $∞ #ª Lighting aperture $º COUNTER RESET button (p.11, 33, 61) $¡ DATE button (p.18, 24) $™ Lithium battery compartment (p.
90 CCD-TR3400 3-859-084- 22 (1) 1 COUNTER RESET button (p.11, 33, 61) 2 TIME CODE WRITE button (p.66) 3 INDEX MARK button (p.65) 4 DATE SEARCH button (p.65) 5 Tape transport buttons (p.16) Remote Commander The buttons that have the same name on the Remote Commander as on the camcorder function identically.
91 Additional information CCD-TR3400 3-859-084- 22 (1) Note on battery life The batteries for the Remote Commander last about 6 months under normal operation.
92 CCD-TR3400 3-859-084- 22 (1) Attaching the shoulder strap Attach the supplied shoulder strap to the hooks for the shoulder strap . 12 3 Identifying the parts.
93 Additional information CCD-TR3400 3-859-084- 22 (1) Operations indicators 1 AE Shift indicator (p.56) 2 WIND indicator (p.22) 3 Manual focusing (p.44) 4 Backlight indicator (p.55) 5 White balance indicator (p.57) 6 Steady Shot indicator (p.42) 7 PROGRAM AE indicator (p.
94 CCD-TR3400 3-859-084- 22 (1) W ar ning indicators 5min 2 REPLACE BATTERY 1 If indicators flash in the viewfinder or in the display window, check the following: ≥ : you can hear the beep sound when the BEEP is set to ON. 7 8 1 The battery is weak or dead.
95 Additional information CCD-TR3400 3-859-084- 22 (1) A, B Adjusting viewfinder ......... 11 AE shift ................................. 56 AFM HiFi Sound ................. 73 ANTI GROUND SHOOTING ......................... 36 Aperture ................
CCD-TR3400 3-859-084- 22 (1) Sony Corporation Printed in Japan.
Ein wichtiger Punkt beim Kauf des Geräts Sony CCD-TR3400 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony CCD-TR3400 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony CCD-TR3400 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony CCD-TR3400 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony CCD-TR3400 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony CCD-TR3400 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony CCD-TR3400 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony CCD-TR3400. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony CCD-TR3400 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
