Benutzeranleitung / Produktwartung VP6700 des Produzenten SMK-Link
Zur Seite of 16
Page 1 User’s Manual Rechargeable Wireless Present er Mouse.
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 Consult the dealer or an experienced radio/TV technician for help. Notice: Any changes or modications not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits.
Page 4 System Requirements Hardware: 2 available USB ports Operating System: W indows 2000, XP or V ista Macintosh OS X or above (Mouse Mode fully compatible; F5 and Application Switch in Presenter Mo.
Page 5 Open the battery compartment by pressing down the cover latch located at the end of the mouse. Please note that the micro USB receiver dongle also stores in this compartment when traveling. Insert the two supplied AAA rechargeable Ni-MH batteries (included in the package) to the battery slots.
Page 6 Charging the Batteries It’ s recommended that you fully charge the batteries before initial use; nevertheless the mouse is functional anytime during charging. Plug the USB connector of the charging cable (included in the box) into the computer ’ s available USB port.
Page 7 of the batteries. The mouse is operational during charging; you can continue use the mouse while charging it via the USB charge cable. The mouse is designed with a sleep mode to save power . When the mouse is inactive for approximately 10 minutes it will automatically shot off the optical sensor .
Page 8 Connecting the Mouse to the Computer Retrieve the micro USB receiver dongle stored inside the battery compartment by opening the battery door as shown in Installing the Rechargeable Batteries section. Close the door . Connect the micro USB receiver dongle to an available USB port on your computer .
Page 9 The radio frequency (RF) codes are factory preset for your convenience; the mouse should be functional at this point. If for any reason the mouse does not function correctly , i.e. no cursor movements or sluggish cursor movements, there may be other wireless devices in the vicinity operating in the same radio frequency channel.
Page 1 0 Using the Presenter Mouse W orking in mouse mode – the sliding door on the top is closed The mouse functions as a standard 3-button mouse: right click, left click and the scroll wheel as the 3rd button. The mouse goes to sleep mode to save battery power after approximately 10 minutes of inactivity .
Page 11 W orking in presenter mode – the sliding door in open position Open the sliding door by pressing on the top cover with 2 thumbs and gently glide the door toward the back of the mouse, away from the 2 mouse buttons, until it stops and clicks.
Page 12 Operating T ips & T rouble Shooting Make sure the mouse is turned on by checking the on/off switch located at the bottom of the mouse before using it. Conserve the battery power by switching the on/off switch to “off” position while traveling or if the mouse will not be in use for awhile.
Page 13 ashing for power-low; and follow the instructions in Charging the Batteries section to rechar ge the batteries. The mouse is functional during char ging.
Page 1 4 either repair or replace it with a more current or upgraded model if the originally purchased model is not available. This warranty does not cover products which have been subjected to misuse.
Page 15 Laser W arning The LASER button located under the sliding door of the presenter mouse activates a laser which emits a red laser beam from the front of the presenter mouse unit. It is typically used as a pointer during presentations. The laser beam emits for the duration that you press the button.
Page 1 6 T hank Y ou Thank you for purchasing the Rechargeable W ireless Presenter Mouse. W e know you had other choices and we appreciate that you chose Interlink Electronics W ireless Presenter Mouse by SMK-LINK for your product needs. So that we may better serve you in the future, please register online at www .
Ein wichtiger Punkt beim Kauf des Geräts SMK-Link VP6700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie SMK-Link VP6700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für SMK-Link VP6700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von SMK-Link VP6700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über SMK-Link VP6700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon SMK-Link VP6700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von SMK-Link VP6700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit SMK-Link VP6700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei SMK-Link VP6700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
