Benutzeranleitung / Produktwartung TLS12 des Produzenten Smeg
Zur Seite of 21
CONTENTS BEFORE USING THE WASHING MACHINE PRECAUTIONS AND GENERAL RECOMMENDATIONS DESCRIPTION OF THE WASHING MACHINE BEFORE THE FIRST WASH CYCLE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES CLE.
GB TLS 12 5019 612 10134 Programme Care Labels Max. Load kg T ype of wash / Notes - for temperature selection, respect the manufacturer's recommendations on the care label Detergents and Additives Special options Max.
5019 612 10134 Programme T emperature (°C) Load (kg) W ater (l) Energy (kWh) Approx. Programme Duration*** (hours : minutes) White Cotton 95 5.0 49* 1.70 1:55 Cotton 60 5.0 42 0.95 2:10 Cotton + Eco** 60 5.0 42 0.85 2:20 Cotton 40 5.0 49 0.55 2:00 Synthetics 60 2.
GB 2 BEFORE USING THE WASHING MACHINE 1. Remove the packaging and check a. Cut and remove the shrink-wrap. b. Remo ve the top protection and the protective corners. c. Remove the bottom protection by tilting and turning the wash ing machine on one rear bottom corner.
GB 3 PRECAUTIONS AND GENERAL RECOMMENDATIONS 1. Packing • The packaging materials ar e 100% recyclable and bear the recycling symbol . Adhere to lo cal regulations when disposing of packaging material.
GB 4 DESCRIPTION OF THE WASHING MACHINE BEFORE THE FIRST WASH CYCLE 1. Lid 2. Detergent dispenser 3. Drum 4. Pump access behind filter 5. After-Sales Service sticker (behind the filter cover) 6. Mobility lever (depending on model) • To move the washing machine: pull the handle out a little bit by hand and pull it out to the stop with the foot.
GB 5 PREPARATION OF THE WASHING Sort the laundry 1. Sort the laundry according to… • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics , wool, handwash items. • Colour Separate whites and coloureds. Wash new coloured items separately.
GB 6 Loading the laundry 1. Open the machine lid by pulling it upwards. 2. Open the drum by pressing the push button (pictures “ 1a ” or “ 1b ” - depending on model). 3. Place the items of laundry in to the drum one by one. Do not exceed the maximum load of the programmes indicated in the separate programme chart.
GB 7 DETERGENTS AND ADDITIVES Choice of the right detergents and additives The type of detergent depends on: • type of fabric (cottons , easy care/synthetics, delicate items, wool). Note: use only specific detergents for wool. • colour; • washing temperature; • degree and type of soiling.
GB 8 Using chlorine bleach • Wash your laundry in the des ired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bl each to the SOFTENER chamber (close the lid carefully).
GB 9 CLEANING THE FILTER/ DRAINING RESIDUAL WATER The washing machine is provided with a self-cleaning pump. The filter keeps objects like buttons, coins, safety- pins etc. which have b een left in the laundry. We recommend to check and clea n the filter regularly, at least two or thr ee times a year.
GB 10 CARE AND MAINTENANCE Detergent dispenser Clean the detergent dispenser re gularly, at least three or four times a year, to prevent detergent build-up: 1. Push in the buttons on each side of the dispen ser. 2. Pull the dispenser towa rds you and remove it.
GB 11 Appliance exterior and control panel • Clean with a so ft damp cloth. • If necessary, a neutral household cleaner can be applied (do not use aggressi ve or abrasive products). Appliance interior • After each washing, leave the lid open for some time to allow the insi de of the appliance to dry.
GB 12 TROUBLESHOOTING GUIDE Your washing machine is equipped wi th automatic safety functions which detect and diagno se faults at an early stage and allow you to react appropriately. Thes e faults are frequently so minor that they can be removed within a few minutes.
GB 13 Description of red indications Red indication lamp lights up Indication on display (if fitted on your machine) Description Causes Solutions “Water tap closed” Appliance has no or insu fficient water supply. The “Start/Pause” light flashes.
GB 14 If your washing machine has no time display, ch eck which of the pr eviously described situations could be the origin of the faul t and follow the corresponding instructions.
GB 15 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the pr oblem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the machine continues to function incorrectly, call After-Sales Service.
GB 16 INSTALLATION Removal of transport bracket The washing machine is fitted with a transport bracket to avoid any possible dama ge during transport. IMPORTANT: Before using the washing machine, the transport bracket at the back MUST be removed. 1. Unscrew the two screws “ A ” and the four screws “ B ” with a flat screwdriver or a No.
GB 17 Adjust the feet Install the washing machine on a level surface, near to electrical, water an d drain connections. If the floor is uneven, adjust the feet (do not insert pieces of wood, cardboard etc. under the feet): 1. Loosen the locknut usin g the wrench provided.
GB 18 Water stop anti-flooding system (see inlet hose type as shown on the right - depending on model) • Screw the hose to the water su pply tap. Turn the tap fully on and check the water-ti ghtness of the connection.
GB 19 ELECTRICAL CONNECTION Do not use extension le ads or multi sockets. Electrical connections must be made in accordance with local regulations. 1) Warning - this washing machine must be earthed This washing machine is normally supplied wi th a main s lead having a plug fitted in the factory which has been checked for corr ect earth continuity.
Ein wichtiger Punkt beim Kauf des Geräts Smeg TLS12 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Smeg TLS12 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Smeg TLS12 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Smeg TLS12 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Smeg TLS12 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Smeg TLS12 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Smeg TLS12 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Smeg TLS12. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Smeg TLS12 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
