Benutzeranleitung / Produktwartung CS18A-7 des Produzenten Smeg
Zur Seite of 50
53 Contents INSTRUCTIONS FOR THE USER: th ese contain user advice, the description of the controls and the correct procedures for c leaning and maintenance of the ap pliance. INSTRUCTIONS FOR THE INST ALLER: these are intended for the qualified technici an who must install the applia nce, set it functioning and carry out an inspection test.
General instructions 54 1. INSTRUCTIONS FOR USE This manual is an integral part of the applianc e. It must be kept in its entirety and in an accessible place f or the whole working life of the appliance. W e recommend reading this manual and all information it contains carefu lly before using the appliance.
General instructions 55 Do not use sealed tins or containers in the appliance. Overpressure may occur inside the containers during cooking, cr eating a danger of explosion. Do not cov er the bottom of the ov en with aluminium or tin foil sheets during cooking and do not place pans or tray s on it to avoid damage to the enamelled surf ace.
General instructions 56 2. SAFETY PRECA UTIONS Consult the installation instructions for safe ty standards on electrical or gas appliances and for v entilation functions.
General instructions 57 The appliance is intended f or use by adults . Do not allo w children to go near it or pla y with it. This appliance may be used by children fr om the age of 8 and by people of.
Instructions f or disposal 58 3. ENVIR ONMENT AL CARE 3.1 Our en vir onmental care Pursuant to Directives 2002/95/EC , 200 2/96/EC and 2 003/108/EC relating to the reduction of the use of hazardous s .
Instructions f or the user 59 4. GET T O KNO W Y OUR APPLIANCE Multifunction models Pyrol ytic Model 1 Cooking hob 5 Fa n 2 Control panel 6 Oven light 3 Oven seal 7 Storage compar tment 4 Door F rame .
Instructions f or the user 60 4.1 Description of the control s on the front pane l Multifunction mode ls Pyrol ytic Model 1 Programming clock The programming clock mak es it possible to display the current time or to set a timer or a programmed cooking operation.
Instructions f or the user 61 3 Thermostat indicator light (On multifunction models onl y) The indicator li ght comes on to indica te that the oven is heating up.
Instructions f or the user 62 5. A V AILABLE A CCESSORIES NO TE: Some models are not provided with all accessorie s. WOK reduction: useful when using a wok. Wide rac k: useful for holding cooking containe rs. It can be plac ed on top of a tra y f or cooking foods which ma y drip.
Instructions f or the user 63 • The ov en accessor ies intended to come into contact with food are made of materials that comply with the provisions of Directive 89/109/EEC, dated 21/ 12/88, and of L egislative Decree 108, dated 25/01/9 2.
Instructions f or the user 64 5.3 Using the r otisserie r od Keep the oven door closed during cooking. Use the clip forks provided to prepare the rotisserie rod with the food. The clip f or ks can be tightene d using the fastening screws . Place the rotisserie sup por ts into the inser ts at the corners of the tray .
Instructions f or the user 65 After having prepared the rotisserie rod, pl ace the tra y on the first r unner (see 4. GET T O KNOW Y OUR APPLIANCE). Rocking the rotisserie supp or ts, inser t the tip of the rotisserie ro d into the hole of the rotisserie motor on the side of the oven.
Instructions f or the user 66 6. USING THE COOKING HOB 6.1 General war nings and advice Before lighting the hob burners, check that the flame-spreader crowns are correctly in place with their respecti ve b u r ner caps, making sure that the holes 1 in the flame-spreaders are align ed with the plugs 3 and ther mocoupl es 2 .
Instructions f or the user 67 6.3 Practical hints f or using the hob burner s F or better burn er efficiency and to minimise ga s consumption: use pans with lids and of a suitable size f or the burner, so that the flames do not reach up the sides of the pan (see paragraph “6.
Instructions f or the user 68 6.4 Cookware diameter s Burner Ø min. (cm) Ø max. (cm) 1 Auxiliary 12 14 2 Semi-rapid 16 24 3 Rapid 18 26 4 Ultra-rapid 20 26 5 Fish kettle b ur ner Suitable o val cont.
Instructions f or the user 69 7. USING THE O V EN 7.1 Bef ore using the appliance • Remo ve any labels (apar t from the technical data plate) from trays, dripping pans and the cooking compar tment.
Instructions f or the user 70 7.5 General warni ngs and advice f or use All cooking operations m ust be carried out with the door closed. The dissipation of heat may cause hazar ds. During coo king, do not cover the bottom of the ov en with al uminium or tin foil and do not place pans or ov en trays on it as this ma y damage the enamel coating.
Instructions f or the user 71 7.6 Analogue progr ammer (on some models only) A Setting knob B Cooking symbol window C Man ual or timed cooking poin ter 7.6.1 Setting the time T o set the correct time, press inward and turn knob A clockwise. Bef ore each programmer setting, activate the required function a nd temperature.
Instructions f or the user 72 7.7 Progra mming cloc k Timer End of cooking Time set ting and re set V a lue decrease V a lue increase The buzz er that sounds at the end of each programming will be made up of 10 buzz es repeated 3 ti mes at inter vals of about 1 minute .
Instructions f or the user 73 7.8.2 Timer This function only activates the b uzzer , without stopping cooking. • Press and the display will light up as shown in figure 1; • W i t h i n 5 s e c o n d s p r e s s k e y o r to s et th e ti mer .
Instructions f or the user 74 7.8.3 Pro gramming Cooking time: the 2 nd ke y can be pressed to set the cooking time. Bef ore it can be set, the ther mo stat knob must be tur ned to th e required cooking temperature and the function selector kn ob to any setting.
Instructions f or the user 75 Cooking star t: as well as setting a cooking time, the cooking star t time can also be set (with a maximum delay of 12 hours in relation to the cu rrent time). T o set the cooking star t/end time, proceed as f ollows: • Set the cooking time as described in the pre vious point.
Instructions f or the user 76 8. O VEN FUNCTIONS ST A TIC: As the heat comes from abo ve and below at the same time, this system is par ticular ly suitable f or cer tain types of food. T raditional coo king, also known as static or th er mal radiation cooking, is suitable f or cooking just one dish at a time.
Instructions f or the user 77 DEFRO STING: Rapid defrosting is helped by s witching on the f an to ensure u nif or m distr ibution of room temperature air inside the ov en.
Instructions f or the user 78 8.1 Cooking ad vice and instructions 8.1.1 General advice W e recommend preheating the o ven before put ting food in. • For cooking on se veral le v els, we recommend using a f an-assisted function to achiev e uniform cooking at all heights.
Instructions f or the user 79 8.1.5 Advice fo r cooking with the Grill a nd the Fan-assiste d grill • Using the Gr ill function (where p resent), meat can be gri lled ev en when it is put into the cold oven; preheating is recommended if you wish to chang e the eff ect of the cooking.
Instructions f or the user 80 8.3 Cooking tables TYPES OF FOOD WEIGHT FUNCTION FIRST COURSES LASAGNE 3-4 kg Static O VEN-BAKED P AST A 2 kg Static MEA T RO AST VEAL 1.2 kg F an-assisted static PORK LOIN 1.2 kg F an-assisted static PORK SHOULDER 1.2 kg T urbo RO AST RABBIT 1.
Instructions f or the user 81 RUNNER POSITION FRO M BO TT OM TEMPERA TURE °C TIME IN MINUTES 1 22 0 - 230 50 - 60 12 2 0 - 2 3 0 4 0 2 18 0 - 190 70 - 80 2 18 0 - 190 70 - 80 2 180 - 190 90 - 100 2 1.
Instructions f or the user 82 TYPES OF FOOD WEIGHT FUNCTION PIZZA 1 kg Pizza BREAD 1 kg Circular FOCA CCIA 1 kg Tu r b o DESSERTS RING CAKE 1 kg F an-assisted static FR UIT T ART 1 kg F an-assisted st atic SHOR T P ASTR Y 0.5 kg F an-assisted bott om J A M TA R T S 1 .
Instructions f or the user 83 RUNNER POSITION FRO M BO TT OM TEMPERA TURE °C TIME IN MINUTES 1 25 0 - 280 6 -10 2 19 0 - 200 25 -30 2 18 0 - 190 15 -20 2 160 50 - 60 2 160 30 - 35 2 16 0 - 170 20 - 2.
Instructions f or the user 84 9. CLEANING AND MAINTENANCE Do not use steam jets to c lean the appliance. The steam could reach the electronics, damaging them and causing short-circuits. W ARNING: For y our safety , y ou are advised to wear protective glo ves while perf orming any c leaning or e xtraordinary maintenance.
Instructions f or the user 85 9.4 Cleaning the cooking hob parts 9.4.1 Pan st ands Remov e the pan stands and cl ean them with luke warm water and non-abrasive detergent, making sure to remov e any encrustations. Dr y them thoroughly and retur n them to the hob .
Instructions f or the user 86 9.5 Cleaning the oven F or the best oven upk eep, clean it regularly after having allow ed it to cool. T ake out all removable par ts. • Clean the oven rac ks with warm water and non-abrasive detergent. Rinse and dr y .
Instructions f or the user 87 9.7 Removing the door seal (not on pyr olitic models) T o per mit thoroug h cleaning of the oven, the door seal ma y be remove d. There are fasteners on all four sides to attach it to the edge of the oven. Pull the edges of the seal outwards to detach the f asteners.
Instructions f or the user 88 9.10 Pyrol ysis: automatic o ven cleani ng Pyrolysis may be carried out at any time of the da y or night (if you wish to benefit from the lower cost of electricity ov er night).
Instructions f or the user 89 Refer to the follo wing diagram f or setting the cleaning cycle dur ation: CLEANING DURA TION LIGHT DIRT MEDIUM DIRT HEA VY DIR T 120 MIN.
Instructions f or the user 90 10.EXTRA ORDINAR Y MAINTENANCE The ov en requires per iodic minor main te nance or repl acement of par ts subj ect to wear , such as gaskets, light bulbs , etc. Specific instr uctions for each operation of this kind are given below .
Instructions f or the user 91 10.2 Removing t he door Open the door completely . Inser t two pins into the holes on the hinges tow ards the back of them until the y engage. Grasp the door on both sid es with both hands, lift it f or ming an angle of arou nd 30° and remov e it.
Instructions f or the installer 92 11.INST ALLING THE APPLIANCE 11.1 Installing in kitchen units V eneers, adhe sives or plastic coatings on adjace nt fur niture should be temperature-resistant (no less than 90°C). If they are not sufficiently temperature-resistant, they ma y warp ov er time.
Instructions f or the installer 93 11.2 Room ventilation and comb ustion e xtraction The room containing the appliance should have a permanent a ir supply in accordance with the standard s in force .
Instructions f or the installer 94 11.3 Gas connection At the end of the installation, check f or any leaks with a soapy solution, never with a flame. The tightening torque b etween connecti ons that incor porate a gasket must be between 10 and 15 Nm.
Instructions f or the installer 95 11.3.1 Connection with a rubber hose W ARNING: The f ollowing in structions are valid solel y for Class 1 installations.
Instructions f or the installer 96 11.3.2 Connectio n with a flexib le steel hose W ARNING: The follo wing instructions are valid f or all types of installation, see fig. A, B, C in chapter “ 11.1 Installing in kitc hen units”. Only use standards-compliant continuous wall steel hoses no longer tha n 2 metres.
Instructions f or the installer 97 11.4 Electrical c onnection Make sure the v oltage and the cross-section of the power supply line match the specifications indicated on the identif ication plate positioned on the appl iance. Do not remov e this plate for an y reason.
Instructions f or the installer 98 POSSIBLE CONNECTION TYPES CABLE TYPE (if not present) 220 - 240 V 1N~ 3-p ole 3 x 1.5 mm² H05V2V2-F • Use H05V2V2-F cables withstan ding temperatures of 90°C or higher . • The values indicated abov e ref er to the cross-secti on of the inter nal conductor .
Instructions f or the installer 99 11.7 W all mounting instructions (some markets only) 1 F asten a hook bolt (not su pplied) into the wall at a height ( h ) of 800 mm from the floor . The installer must provide the hook bolt when installing the ap pliance.
Instructions f or the installer 100 12. AD APT A TION T O DI FFERENT TYPES OF GAS BEFORE PERFORMING ANY OPERATIONS, SWITCH OFF THE POWER SUPPLY TO THE APPLIANCE.
Instructions f or the installer 101 12.2 Burner and nozzle c haracteristics table F or burner arrangement, see “Instr uc tions for the user - 6.4 Cookware diameters”. Burner Rated heating capacity (kW) Natural gas – G20 20 mbar Nozzle diameter 1/100 mm Reduced capacity (W) 1 Au xiliar y 1.
Instructions f or the installer 102 12.3 Final operations After replacing the nozzles, repositi on the flame-spreade r crowns, the b ur ner caps and the pan stands. F ollowing adjustme nt to a gas other than the one orig inally set in the factory , replace the gas setting label fixed to the appliance with the o ne corresponding to the new gas.
Ein wichtiger Punkt beim Kauf des Geräts Smeg CS18A-7 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Smeg CS18A-7 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Smeg CS18A-7 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Smeg CS18A-7 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Smeg CS18A-7 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Smeg CS18A-7 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Smeg CS18A-7 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Smeg CS18A-7. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Smeg CS18A-7 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
