Benutzeranleitung / Produktwartung V5915 des Produzenten Axis Communications
Zur Seite of 64
AXIS V59 15 PTZ Network Camera User Manual.
About this Document This manual is intended for administrators and users of AXIS V59 15 PTZ Network Camera, and is applicable to rmware 5.75 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
Safety This product complies with IEC/EN/UL 60950-1, Safety of Information Technology Equipment. If its connecting cables are routed outdoors, the product shall be grounded either through a shielded network cable (STP) or other appropriate method.
AXIS V5915 PTZ Network Camera Safety Infor mation Safety Infor mation Hazard Levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury . WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury .
AXIS V5915 PTZ Network Camera T able of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Hazard Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS V5915 PTZ Network Camera T able of Contents Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Reset to Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS V5915 PTZ Network Camera Hardware Overview Hardware Overview 1 2 3 4 5 6 7 8 9 1 P ower connector 2 3.5 mm, unbalanced audio in 3 3.5 mm, unbalanced audio out 4 Network connector 5 Microphone pow.
AXIS V5915 PTZ Network Camera Hardware Overview HDMI Connector The HDMI TM Connector is used for connecting to a display or monitor . Network Connector RJ45 Ethernet connector .
AXIS V5915 PTZ Network Camera Hardware Overview The control button is used for: • Resetting the product to factory default settings. See page 54 . • Connecting to an AXIS Video Hosting System service. See page 46 . To connect, press and hold the button for about 3 seconds until the Status LED ashes green.
AXIS V5915 PTZ Network Camera Access the Product Access the Product To install the Axis product, see the Installation Guide supplied with the product. The product can be used with most operating systems and browsers.
AXIS V5915 PTZ Network Camera Access the Product For T echnical notes on this and other topics, visit the Axis Support web at www .axis.com/techsup Set the Root P assword To access the Axis product, you must set the password for the default administrator user root .
AXIS V5915 PTZ Network Camera Access the Product Click Snapshot to save a snapshot of the video image. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Cong > Action Buttons .
AXIS V5915 PTZ Network Camera Access the Product Speaker button — Click to turn the speakers on or off. Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode , the Microphone and Talk buttons must both be active to send audio to the Axis product.
AXIS V5915 PTZ Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS V5915 PTZ Network Camera Media Streams AXIS Media Control (AMC) AXIS Media Control (AMC) in Internet Explorer in Windows is the recommended method of accessing live video from the Axis product. The AMC Control Panel can be used to congure various video and audio settings.
AXIS V5915 PTZ Network Camera Media Streams Note • <ip>= IP address • The Axis product supports QuickTime 6.5.1 and later . • QuickTime may add latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
AXIS V5915 PTZ Network Camera Set Up the Product Set Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS V5915 PTZ Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 18 . • Stream proles. See page 19 .
AXIS V5915 PTZ Network Camera Video and Audio • Maximum frame rate . T o avoid bandwidth problems, the frame rate allowed to each viewer can be Limited to a xed amount. Alternatively , the frame rate can be set as Unlimited , which means the Axis product always delivers the highest frame rate possible under the current conditions.
AXIS V5915 PTZ Network Camera Video and Audio • When setting up recording using action rules. See Events on page 34 . • When setting up continuous recording. See Continuous Recording on page 40 . • In the Live View page – select the stream prole from the Stream prole drop-down list.
AXIS V5915 PTZ Network Camera Video and Audio Wide Dynamic Range Wide Dynamic Range can improve the exposure when there is a considerable contrast between light and dark areas in the image. Enable WDR in intense backlight conditions. Disable WDR in low light conditions for optimal exposure.
AXIS V5915 PTZ Network Camera Video and Audio Note • Image and text overlay will not be displayed on video stream over HDMI. • Image and text overlay will not be displayed on video stream over SDI. To enable overlays: 1. Go to Video & Audio > Video Stream and select the Image tab .
AXIS V5915 PTZ Network Camera Video and Audio To display the overlay image: 1. Go to Video & Audio > Video Stream and select the Image tab . 2. Under Overlay Settings , select Include overlay image at the coordinates . 3. To control the image’s position, enter the X and Y coordinates.
AXIS V5915 PTZ Network Camera Video and Audio • Simplex – Network Camera speaker only - Audio is transmitted from a client to the Axis product and can be played by a speaker connected to the product. T o transmit audio using the Live View page, the T alk and Microphone on buttons must both be active, see AMC Audio Controls on page 12 .
AXIS V5915 PTZ Network Camera Video and Audio Set the required Bit rate depending on the selected encoding. A higher bit rate will give better audio quality . A lower bit rate may have latency or delay , but will require less bandwidth. For more information about these settings, please see the online help .
AXIS V5915 PTZ Network Camera Configure the Live View Page Configure the Live View Page Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole.
AXIS V5915 PTZ Network Camera Configure the Live View Page User Dened Links To display user-dened links in the Live View page, select the Show custom link option, give the link a name and then enter the URL to link to. When dening a web link do not remove the 'http://' from the URL address.
AXIS V5915 PTZ Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) Preset P ositions A preset position is a saved view that can be used to quickly steer the camera to a specic position.
AXIS V5915 PTZ Network Camera PTZ (Pan Tilt Zoom) To include the name of the OSDI zone in the overlay text, go to Video & Audio < Video Stream < Overlay Settings . Check the Include text box and enter the modier #L in the eld. For more information about modiers, see File Naming & Date/Time Formats in the online help .
AXIS V5915 PTZ Network Camera PTZ (Pan Tilt Zoom) • P an control • Tilt control • Zoom control • Focus control • Iris control To disable specic controls, deselect the options under Enable/Disable controls . Note Disabling PTZ controls will not affect preset positions.
AXIS V5915 PTZ Network Camera Detectors Detectors Audio Detection The Axis product can be congured to generate an alarm when audio rises above or falls below the threshold value. The threshold value can be set in the range 0–1 00 where 0 is the most sensitive and 1 00 the least sensitive.
AXIS V5915 PTZ Network Camera Applications Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. For information about available applications, downloads, trials and licenses, go to www .
AXIS V5915 PTZ Network Camera Applications If the Axis product is reset to factory default, uploaded applications and their settings are removed. For information about factory default, see Reset to Factory Default Settings .
AXIS V5915 PTZ Network Camera Events Events The Event pages allow you to congure the Axis product to perform actions when different events occur . For example, the product can start a recording or send an email notication when motion is detected.
AXIS V5915 PTZ Network Camera Events - Manual T rigger – Trigger the rule using the Manual T rigger button in the Live View page. See Controls on the Live View P age on page 1 1 . This can for example be used to validate actions during product installation and conguration.
AXIS V5915 PTZ Network Camera Events • Send Notication – Send a notication message to a recipient. • Send SNMP T rap – Send an SNMP trap message to the operator . Make sure that SNMP is enabled and congured under System Options > Network > SNMP .
AXIS V5915 PTZ Network Camera Events HTTPS Send Images Send Notication Send Video Clip Encrypted le transfer using HyperText Transfer Protocol Secure (HTTPS). Specify login information for the HTTPS server and validate the server’s certicate.
AXIS V5915 PTZ Network Camera Events Set Up Recurrences Recurrences are used to trigger action rules repeatedly , for example every 5 minutes or every hour . To set up a recurrence: 1. Go to Events > Recurrences and click Add . 2. Enter a descriptive name and recurrence pattern.
AXIS V5915 PTZ Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 34 . • To access recordings, see Find Recordings on page 39 .
AXIS V5915 PTZ Network Camera Recordings To play a recording, follow these steps: 1. Go to Recordings > List . 2. To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the lters.
AXIS V5915 PTZ Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. T o switch languages, go to Setup > Languages and rst upload the new language le.
AXIS V5915 PTZ Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS V5915 PTZ Network Camera System Options HTTPS HTTPS (HyperText Transfer Protocol over Secure Socket Layer , or HTTP over SSL) is a web protocol providing encrypted browsing. HTTPS can also be used by users and clients to verify that the correct device is being accessed.
AXIS V5915 PTZ Network Camera System Options Certicates Certicates are used to authenticate devices on a network. T ypical applications include encrypted web browsing (HTTPS), network protection via IEEE 80 2.1X and secure upload of images and notication messages for example via email.
AXIS V5915 PTZ Network Camera System Options • Synchronize with computer time – Sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically . • Synchronize with NTP Server – Obtains date and time from an NTP server .
AXIS V5915 PTZ Network Camera System Options 1. Acquire a free static IP address on the same network segment as the computer . 2. Locate the serial number (S/N) on the product label.
AXIS V5915 PTZ Network Camera System Options To register the Axis product with AXIS Internet Dynamic DNS Service, go to System Options > Network > T CP/IP > Basic . Under Services , click the AXIS Internet Dynamic DNS Service Settings button (requires access to the Internet).
AXIS V5915 PTZ Network Camera System Options HTTPS The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced . In addition to the default setting, which is 443, any port in the range 1 024–65535 can be used.
AXIS V5915 PTZ Network Camera System Options SOCKS SOCKS is a networking proxy protocol. The Axis product can be congured to use a SOCKS server to reach networks on the other side of a rewall or proxy server .
AXIS V5915 PTZ Network Camera System Options Note The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see Reset to Factory Default Settings on page 54 . UPnP TM The Axis product includes support for UPnP TM .
AXIS V5915 PTZ Network Camera System Options Mount and Unmount SD Card NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected. The SD card is automatically mounted when the card is inserted into the Axis product or when the product is started.
AXIS V5915 PTZ Network Camera System Options Note For NAS recommendations see www .axis.com To add a network share: 1. Go to System Options > Storage . 2. Click Network Share . 3. Enter the IP address, DNS or Bonjour name to the host server in the Host eld.
AXIS V5915 PTZ Network Camera System Options • the static IP address • the default router • the subnet mask • the system time • the IEEE 80 2.1X settings • uploaded applications are kept but must be restarted Click Default to reset all settings, including the IP address, to the factory default values.
AXIS V5915 PTZ Network Camera System Options Advanced Scripting Scripting allows experienced users to customize and use their own scripts. NO NO NO TICE TICE TICE Improper use may cause unexpected behavior and loss of contact with the Axis product. Axis strongly recommends that you do not use this function unless you understand the consequences.
AXIS V5915 PTZ Network Camera Troubleshooting Troubleshooting Check the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS V5915 PTZ Network Camera Troubleshooting The IP address is being used by another device Disconnect the Axis product from the network. Run the Ping command (in a Command/DOS window , type ping and the IP address of the product): • If you receive: Reply from <IP address>: bytes=32; time=10.
AXIS V5915 PTZ Network Camera Troubleshooting P oor rendering of H.264 images Ensure that your graphics card is using the latest driver . The latest drivers can usually be downloaded from the manufacturer’s website. Color saturation is different in H.
AXIS V5915 PTZ Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS V5915 50 Hz AXIS V5915 60 Hz Image sensor 1/2.8'‘ progressive scan RGB CMOS Lens Autofocus, P-iris control, 4.3 - 129 mm, F1.
AXIS V5915 PTZ Network Camera T echnical Specifications Function/group Item Specications Audio streaming Two-way , stereo Audio compression SDI: AES3 24 bit, 48 kHz HDMI: LPCM Network: AAC LC 8 to 48 kHz, 8 to 128 kbit/s G.7 1 1 PCM 8 kHz 64 kbit/s G.
AXIS V5915 PTZ Network Camera T echnical Specifications Function/group Item Specications Application Programming Interface Open API for software integration, including VAPIX® and AXIS Camera Application Platform; specications at www .axis.com AXIS Video Hosting System (AVHS) with One-Click Connection.
AXIS V5915 PTZ Network Camera T echnical Specifications Function/group Item Specications Casing ASA plastic cover black and white. Color: White NCS S 1 00 2-B . Memory 5 12 MB Flash, 1 GB RAM Battery backed-up real-time clock P ower 8–28 V DC (12V power supply included) typical 12 W , max.
AXIS V5915 PTZ Network Camera T echnical Specifications Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment. Note: This pin can only be used as power out. 12 V DC Max load = 50 mA Digital input – Connect to pin 1 to activate, or leave oating (unconnected) to deactivate.
AXIS V5915 PTZ Network Camera T echnical Specifications P erformance Considerations When setting up your system, it is important to consider how various settings and situations will affect performance. Some factors affect the amount of bandwidth (the bit rate) required, others can affect the frame rate, and some affect both.
User Manual V er . M3.4 AXIS V59 15 PTZ Network Camera Date: July 20 15 © Axis Communications AB, 20 15 P art No. 149 1443.
Ein wichtiger Punkt beim Kauf des Geräts Axis Communications V5915 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Axis Communications V5915 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Axis Communications V5915 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Axis Communications V5915 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Axis Communications V5915 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Axis Communications V5915 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Axis Communications V5915 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Axis Communications V5915. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Axis Communications V5915 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
