Benutzeranleitung / Produktwartung P3346 des Produzenten Axis Communications
Zur Seite of 64
AXIS P3346 Fixed Dome Network Camera User Manual.
About this document This manual is intended for administrators and users of AXIS P3346 Fixed Dome Network Camera, and is applicable to rmware 5.50 and later . It includes instructions for using and managing the product on your network. Previous experience of networking will be of use when using this product.
The battery should not be replaced unless required, but if the battery does need replacing, contact Axis support at www .axis.com/techsup for assistance. WARNING • Risk of explosion if the battery is incorrectly replaced. • Replace only with an identical battery or a battery which is recommended by Axis.
AXIS P3346 Fixed Dome Network Camera T able of Contents Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AXIS P3346 Fixed Dome Network Camera T able of Contents Emergency Recovery Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Symptoms, P ossible Causes and Remedial Actions . . . . . . . . . . . . . . . . . . . . . 55 Technical Specications .
AXIS P3346 Fixed Dome Network Camera Hardware Overview Hardware Overview 2 1 3 4 5 6 7 8 1 Product ID and Serial number (S/N) 2 SD card slot 3 Network connector (P oE) 4 Audio out 5 Network, Status and P ower LED indicators 6 Audio in 7 I/O connector 8 Control button Connectors and Buttons For technical specications, see page 59 .
AXIS P3346 Fixed Dome Network Camera Hardware Overview Audio Connector The Axis product has the following audio connectors: • Audio in (pink) – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
AXIS P3346 Fixed Dome Network Camera Accessing the Product Accessing the Product To install the Axis product, refer to the Installation Guide supplied with the product.
AXIS P3346 Fixed Dome Network Camera Accessing the Product Access from the Internet Once connected, the Axis product is accessible on your local network (LAN). To access the product from the Internet you must congure your network router to allow incoming data trafc to the product.
AXIS P3346 Fixed Dome Network Camera Accessing the Product 2. Enter a password and then re-enter it to conrm the spelling. 3. Click OK . The password has now been congured. Congure Capture Mode Capture mode denes the maximum resolution and maximum frame rate available in the Axis product.
AXIS P3346 Fixed Dome Network Camera Accessing the Product 1. Go to Setup > Events . 2. Click Add to add a new action rule. 3. From the Trigger drop-down list, select Input Signal . 4. From the second drop-down list, select Manual T rigger . 5. Select the desired action and congure the other settings as required.
AXIS P3346 Fixed Dome Network Camera Accessing the Product PTZ Controls The Live View page also displays P an/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specied users under System Options > Security > Users .
AXIS P3346 Fixed Dome Network Camera Media Streams Media Streams The Axis product provides several audio and video stream formats. Y our requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.
AXIS P3346 Fixed Dome Network Camera Media Streams The AMC Control Panel can be used to congure various video and audio settings. Please see the AXIS Media Control User’s Manual for more information. The AMC Control P anel is automatically installed on rst use, after which it can be congured.
AXIS P3346 Fixed Dome Network Camera Media Streams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later . • QuickTime adds latency to the video stream. • It may be possible to use other players to view the H.264 stream using the paths above, although Axis does not guarantee this.
AXIS P3346 Fixed Dome Network Camera Setting Up the Product Setting Up the Product The Axis product can be congured by users with administrator or operator rights. To open the product’s Setup pages, click Setup in the top right-hand corner of the Live View page.
AXIS P3346 Fixed Dome Network Camera Video and Audio Video and Audio The video and audio settings can be used to optimize video and audio quality . Y ou can congure the following: • Video stream settings. See page 17 . • Stream proles. See page 19 .
AXIS P3346 Fixed Dome Network Camera Video and Audio Pixel Counter The pixel counter shows the number of pixels in an area of the image. The pixel counter is useful in situations where there is a requirement that the image is a certain size, for example in face recognition.
AXIS P3346 Fixed Dome Network Camera Video and Audio Stream Proles A stream prole is a set of predened stream settings including resolution, compression, frame rate and overlay settings. Stream proles can be used: • When setting up recording using action rules.
AXIS P3346 Fixed Dome Network Camera Video and Audio Image Appearance Increasing the Color level increases the color saturation. The value 100 gives maximum color saturation. The value 0 gives a black and white image. The image Brightness can be adjusted in the range 0–1 00, where a higher value produces a brighter image.
AXIS P3346 Fixed Dome Network Camera Video and Audio Day/Night The IR cut lter prevents infrared (IR) light from reaching the image sensor . In poor lighting conditions, for example at night, or when using an external IR lamp, set the IR cut lter to Off .
AXIS P3346 Fixed Dome Network Camera Video and Audio 2. To include an overlay image, select Include overlay image at the coordinates . The overlay image must rst be uploaded to the Axis product, see Overlay Image . 3. To include date and time, select Include date and Include time .
AXIS P3346 Fixed Dome Network Camera Video and Audio Focus & Zoom Focus and zoom should only be congured when installing or reinstalling the product. For installation instructions, refer to the product’s Installation Guide. To set focus and zoom: 1.
AXIS P3346 Fixed Dome Network Camera Video and Audio Audio Input An external microphone or a line source can be connected to the Audio-in connector . Congure the audio input settings under Video & Audio > Audio Settings . Note The internal microphone is used by default; the external microphone is used when connected.
AXIS P3346 Fixed Dome Network Camera Video and Audio To add, download, modify or remove audio clips, go to Video & Audio > Audio Clips . For more information see the online help . To congure the Axis product to play audio clips when an event occurs, an action rule must be set up.
AXIS P3346 Fixed Dome Network Camera Live View Config Live View Config Y ou can customize the Live View page and alter it to suit your requirements. It is possible to dene the following features of the Live View page. • Stream Prole. See page 19 .
AXIS P3346 Fixed Dome Network Camera Live View Config Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG). QuickTime H.264. Java applet A slower imaging alternative to AMC (Motion JPEG). Requires one of the following installed on the client: • JVM (J2SE) 1.
AXIS P3346 Fixed Dome Network Camera Live View Config - Pulse activates the output for a dened period of time. The pulse time can be set from 1/1 00 second to 60 seconds.
AXIS P3346 Fixed Dome Network Camera PTZ (Pan Tilt Zoom) PTZ (Pan Tilt Zoom) The PTZ menu is available if digital PTZ (pan, tilt and zoom) is enabled in the selected view area.
AXIS P3346 Fixed Dome Network Camera PTZ (Pan Tilt Zoom) Guard T our A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for congurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser .
AXIS P3346 Fixed Dome Network Camera Detectors Detectors Camera T ampering Camera Tampering can generate an alarm whenever the camera is repositioned, or when the lens is covered, sprayed or severely defocused. To send an alarm, for example an email, an action rule must be set up.
AXIS P3346 Fixed Dome Network Camera Detectors Note • Using the motion detection feature may decrease the product’s overall performance. • The position of the Motion Detection Window is relative to the orientation of the Camera. Changing the orientation of the camera will also change the position of the Motion Detection Window .
AXIS P3346 Fixed Dome Network Camera Detectors High level (100%) Only very large objects trigger motion detection. An object that appears in the window triggers motion detection for a long time before it is considered as non-moving. Ordinary colored objects on ordinary backgrounds trigger motion detection.
AXIS P3346 Fixed Dome Network Camera Applications Applications Third party applications can be uploaded to and installed on the Axis product. Applications add functionality to the product, for example video analytics and intelligent video capabilities such as recognition, tracking, detection and counting.
AXIS P3346 Fixed Dome Network Camera Applications If the Axis product is reset to factory default, installed applications and their settings are removed.
AXIS P3346 Fixed Dome Network Camera Events Events The Axis product can be congured to perform actions when different events occur , for example, start a recording when motion is detected. The set of conditions that denes how and when the action is triggered is called an Action Rule .
AXIS P3346 Fixed Dome Network Camera Events • Time - Recurrence – Trigger the rule periodically . See Recurrences on page 39 . This can for example be used to upload an image every 5 minutes. - Use Schedule – Trigger the rule according to the selected schedule.
AXIS P3346 Fixed Dome Network Camera Events To add additional criteria, select the Additional conditions option and add additional triggers. T o prevent an action from being triggered repeatedly , a Wait at least time can be set.
AXIS P3346 Fixed Dome Network Camera Events Setting Up an Email Recipient Email recipients can be congured by selecting one of the listed email providers, or by specifying the SMTP server , port and authentication used by , for example, a corporate email server .
AXIS P3346 Fixed Dome Network Camera Recordings Recordings The Axis product can be congured to record video continuously or according to an action rule: • To start a continuous recording, see page 40 . • To set up action rules, see page 37 . • To access recordings, see Recording List on page 40 .
AXIS P3346 Fixed Dome Network Camera Languages Languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and rst upload the new language le.
AXIS P3346 Fixed Dome Network Camera System Options System Options Security Users User access control is enabled by default and can be congured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords.
AXIS P3346 Fixed Dome Network Camera System Options 2. Select an HTTPS certicate from the list of installed certicates. 3. Optionally , click Ciphers and select the encryption algorithms to use for SSL. 4. Set the HTTPS Connection P olicy for the different user groups.
AXIS P3346 Fixed Dome Network Camera System Options To install a self-signed certicate: 1. Go to Setup > System Options > Security > Certicates . 2. Click Create self-signed certicate and provide the requested information. To create and install a CA-signed certicate: 1.
AXIS P3346 Fixed Dome Network Camera System Options Network Basic T CP/IP Settings The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously , and at least one version must always be enabled.
AXIS P3346 Fixed Dome Network Camera System Options ping -l 408 -t <IP address> Windows example (this may require that you run the command prompt as an administrator) arp -s 192.
AXIS P3346 Fixed Dome Network Camera System Options Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the rst part of a fully qualied domain name, for example, myserver is the host name in the fully qualied domain name myserver.
AXIS P3346 Fixed Dome Network Camera System Options Note • For NA T traversal to work, this must be supported by the router . The router must also support UPnP TM .
AXIS P3346 Fixed Dome Network Camera System Options SNMP The Simple Network Management Protocol (SNMP) allows remote management of network devices. An SNMP community is the group of devices and management station running SNMP . Community names are used to identify groups.
AXIS P3346 Fixed Dome Network Camera System Options Storage SD Card The Axis product supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 10. NO NO NO TICE TICE TICE To prevent corruption of recordings, the SD card should always be unmounted before it is ejected.
AXIS P3346 Fixed Dome Network Camera System Options 4. Enter the name of the share in the Share eld. Sub folders cannot be used. 5. If required, select The share requires login and enter the user name and password.
AXIS P3346 Fixed Dome Network Camera System Options Support Support Overview The System Options > Support > Support Overview page provides information on troubleshooting and contact information, should you require technical assistance. See also T roubleshooting on page 54 .
AXIS P3346 Fixed Dome Network Camera System Options File Upload Files, for example web pages and images, can be uploaded to the Axis product and used as custom settings.
AXIS P3346 Fixed Dome Network Camera Troubleshooting Troubleshooting Checking the Firmware Firmware is software that determines the functionality of network devices. One of your rst actions when troubleshooting a problem should be to check the current rmware version.
AXIS P3346 Fixed Dome Network Camera Troubleshooting 1. In UNIX/Linux , type the following from the command line: arp -s <IP address> <serial number> temp ping -l 408 <IP address> In.
AXIS P3346 Fixed Dome Network Camera Troubleshooting The IP address has been changed by DHCP IP addresses obtained from a DHCP server are dynamic and may change. If the IP address has been changed, use AXIS IP Utility or AXIS Camera Management to locate the product on the network.
AXIS P3346 Fixed Dome Network Camera Troubleshooting Lower frame rate than expected See P erformance Considerations on page 63 . Reduce the number of applications running on the client computer . Limit the number of simultaneous viewers. Check with the network administrator that there is enough bandwidth available.
AXIS P3346 Fixed Dome Network Camera Troubleshooting Storage and disk management problems Storage disruption A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other read or write problems occur .
AXIS P3346 Fixed Dome Network Camera T echnical Specifications T echnical Specifications Function/group Item Specications Models AXIS P3346 Image sensor Progressive scan RGB CMOS 1/3'‘ (effective) Lens Varifocal with remote zoom and focus, IR corrected, megapixel resolution 3 – 9 mm, F1.
AXIS P3346 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Security P assword protection, IP address ltering, HTTPS encryption*, IEEE 802.
AXIS P3346 Fixed Dome Network Camera T echnical Specifications Function/group Item Specications Casing P olycarbonate transparent cover Aluminum inner camera module with encapsulated electronics T.
AXIS P3346 Fixed Dome Network Camera T echnical Specifications Connectors I/O Connector 4-pin terminal block for: • Auxiliary power (DC output) • Digital Input • Digital Output • 0 V DC (-) 4 3 2 1 Function Pin Notes Specications 0 V DC (-) 1 0 V DC DC output 2 Can be used to power auxiliary equipment.
AXIS P3346 Fixed Dome Network Camera T echnical Specifications Audio Input Audio Output 1 Tip Microphone/Line in 2 Ring Line out (mono) 3 Sleeve Ground Ground SD Card Slot Supports SD cards with up to 64 GB of storage. For best recording performance, use an SDHC or SDXC card with speed class 1 0.
User Manual V er . M3.5 AXIS P3346 Fixed Dome Network Camera Date: December 2013 © Axis Communications AB, 20 13 P art No. 54956.
Ein wichtiger Punkt beim Kauf des Geräts Axis Communications P3346 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Axis Communications P3346 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Axis Communications P3346 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Axis Communications P3346 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Axis Communications P3346 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Axis Communications P3346 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Axis Communications P3346 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Axis Communications P3346. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Axis Communications P3346 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
