Benutzeranleitung / Produktwartung LC-32LE140E des Produzenten Sharp
Zur Seite of 45
5 0 2 0 1 3 0 1 SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORA TION http://www .sharp.eu LC-32LE140E LCD COLOUR TELEVISION OPERA TION MANUAL LCD TELEVIZOR U BOJI KORISN.
English - 1 - Contents Features ................................................................. 3 Dear SHARP customer ........................................... 3 Introduction ............................................................. 3 Preparation .
English - 2 - SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked ASA or and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
English - 3 - Features Remote controlled colour LCD TV . • Fully integrated T errestrial digital-cable TV (DVB- • T -C- MPEG2) (DVB-T -C MPEG4). HDMI connectors for digital video and audio. This • connection is also designed to accept high de fi nition signals.
English - 4 - Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean • the product. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth to gently wipe the panel when it is dirty .
English - 5 - Safety Precautions Read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience.
English - 6 - LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally , a few non-active pixels may appear on the screen as a fi xed blue, green or red point.
English - 7 - Package Contents SLEEP SCREEN PRESETS LANG. FAV EPG SWAP SOURCE C DISP . SEARCH MODE INFO CH V Remote Control LCD TV Batteries: 2 X AAA Instruction Book Quick Guide 1 X Video & Audio Connection Cable 1 X Component Video Connection Cable Note: Y ou should check the accessories after purchasing.
English - 8 - Remote Control Buttons Standby 1. Image size / Zooms videos (in Media Browser 2. video mode) Sleep T imer 3. Mono / Stereo - Dual I-II / Currrent Language (*) 4. (in DVB channels) Favourite Mode Selection (in DVB channels) 5. Numeric buttons 6.
English - 9 - LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons 1. Standby/On button 2. TV/A V button 3. Programme Up/Down buttons 4. V olume Up/Down buttons Note: Press “ ” and buttons at the same time to view main menu.
English - 10 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you 1. subscribe to. For more information, see “Conditional Access” section. USB Inputs. 2. Note that programme recording feature is available via these USB inputs.
English - 1 1 - Using USB Inputs USB Connection Y ou can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV . This feature allows you to play fi les stored in a USB drive or record programmes. 2.5” and 3.
English - 12 - Connecting to a DVD Player via Component Sockets (YPbPr) or Scart Cable Some DVD players are connected through • COMPONENT SOCKETS (YPbPr) . In this case, you must use the supplied Component video connection cable for enabling connection.
English - 13 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV .
English - 14 - If the TV will not be used for a long period i.e. • holidays, then unplug the power cord from the mains socket. Standby Noti fi cations If the TV switches of f while in No Signal mod.
English - 15 - Viewing Electronic Programme Guide (EPG) Y ou can view the electronic programme guide (EPG) to view information about available programmes.T o view the EPG menu please press EPG button on the remote control. Press “ • ”/“ ” buttons to navigate through channels.
English - 16 - Digital T eletext (*) (*) If available in your country • Press the “TXT” button. The digital teletext information appears. • Operate it with the coloured buttons, cursor buttons • and OK button. The operation method may differ depending on the contents of the digital teletext.
English - 17 - A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 17 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.
English - 18 - Press • OK button to quit channel list and watch TV . If you have selected the Country option as Netherlands in First T ime Installation,only OK and LOCK options will be displayed. Installation Press “MENU” button on the remote control and select Installation by using “ ” or “ ” button.
English - 19 - (*) If you have selected the Country option to Netherlands in First T ime Installation, cable manual search option will not be available. Analogue Manual Search After selecting search type as analogue, you can use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option.
English - 20 - Pressing “ • ” or “ ” button moves to the previous/ next character . Pressing “ ” or “ ” button toggles the current character , i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”. Pressing the numeric buttons ‘0.
English - 21 - Note: If the Country option is set to France, you can use 4725 as the default code. Media Playback Using Media Browser If the USB stick is not recognized after power off/on or First Time Installation, fi rst, plug the USB device out and power off/on the TV set.
English - 22 - Jump (Numeric buttons) : Jump to selected fi le using the numeric buttons. OK : Views the selected picture in full screen. Up/Down: Navigate. Slideshow ( button) : Starts the slideshow using all images. GREEN button : Views images in thumbnails.
English - 23 - BLUE button (Sort) : Changes the order of the recordings. Y ou can select from a wide range of sorting options. OK button : Activates play options menu: • Play from start: Plays the recording from the beginning. • Resume: Recommences the recordings.
English - 24 - Instant Recording IMPORT ANT : T o record a programme, you should fi rst connect a USB disk to your TV while the TV is switched off. Y ou should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
English - 25 - A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 25 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.
English - 26 - Con fi guring Picture Settings Y ou can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Operating Picture Settings Menu Items Press “ • ” or “ ” button to highlight a menu item.
English - 27 - H Position : This item shifts the image horizontally to right hand side or left hand side of the screen. V Position : This item shifts the image vertically towards the top or bottom of the screen.
English - 28 - Con fi guring Y our TV’s Settings Detailed settings can be configured to suit your personal preferences. Press “MENU” button and select Settings ikon by using “ ” or “ ” button. Press OK button to view Settings menu. Operating Settings Menu Items Press “ • ” or “ ” button to highlight a menu item.
English - 29 - Con fi guring Language Preferences Y ou can operate the TV’s language settings using this menu. Press “MENU” button and select the fi fth icon by using “ ” or “ ” button.
English - 30 - Note: If the Country option is set to France, you can use 4725 as the default code. After coding the correct PIN number , parental settings menu will be displayed: Parental Settings Menu Operation Select an item by using “ • ” or “ ” button.
English - 31 - Deleting a Timer Select the timer you want to delete by pressing “ • ” or “ ” button. Press • RED button. Select • YES by using “ ” or “ ” buttons to delete the timer . Select NO to cancel. Recording Con fi guration Select Recording Con fi guration item in the Settings menu to con fi gure recording settings.
English - 32 - Con fi guring Source Settings Y ou can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed. Select • Sources in the Settings menu and press OK button. Press“ • ” or “ ” buttons to select a source.
English - 33 - Standby Search (optional) : Use “ ” or “ ” button to select Standby Search and then press “ ” or “ ” button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable.T o use Standby search please make sure that you select Standby Search as On.
English - 34 - Tips Screen Care : Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part.
English - 35 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1366 x 768. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below .
English - 36 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI to HDMI cables (not supplied), you can refer to the following resolution information.
English - 37 - Appendix D: Supported File Formats for USB Mode Media File Extension Format Remarks Video Audio ( Maximum resolution/Bit rate etc. ) Movie .mpg, .mpeg MPEG1, 2 MPEG Layer 1/2/3 MAX 1920x1080 @ 30P 20Mbit/sec .dat MPEG1, 2 MPEG2 .vob MPEG2 .
English - 38 - Appendix E: Software Upgrade • Y our TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels.
English - 39 - Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for UK models 170-862 MHz for EU models T ransmission standard: DVB-T .
English - 40 - Dimensional Drawings 773 522 490 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 40 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 40 30.03.2012 10:10:39 30.
English - 41 - End of life disposal A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 41 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.
English - 42 - Installing the Stand 1. Sharp T elevision 2. Stand Cover 3. Stand IMPORT ANT Please read the following information carefully before attaching the stand to your new Sharp T elevision. Installing the Stand ! Before fitting the stand, ensure that the TV is unplugged from its power source.
English - 43 - Uninstalling the Stand IMPORT ANT Please read the following information carefully before detaching the stand of your Sharp T elevision. Uninstalling the Stand ! Before detaching the stand, ensure that the TV is unplugged from its power source.
English - 44 - Screw Dimensions L D Model D L Item Number VESA Installation of the Screw LC-32LE140E Ø4 30 8 200 x 100 (W x H) T o the wall M4 18 4 T o the product A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.indd 44 A01_MB62_[GB]_1910UK_IDTV_TC_PVR_NICKEL17_32942LED_ROCKER_ZIGGO_10075885_50201301.
Ein wichtiger Punkt beim Kauf des Geräts Sharp LC-32LE140E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp LC-32LE140E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp LC-32LE140E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp LC-32LE140E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp LC-32LE140E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp LC-32LE140E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp LC-32LE140E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp LC-32LE140E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp LC-32LE140E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
