Benutzeranleitung / Produktwartung CD-DD4500 des Produzenten Sharp
Zur Seite of 48
Thank you for purchasing this SHARP product. T o obtain the best performance from this product, please read this manual carefully . It will guide you in operating your SHARP product.
2 Special Notes NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation.
3 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 CAUTION All the safety and operating instructions should be read before the appliance is operated, and should be retained for future reference. Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety .
4 General Information Page Accessories ......................................................................................... 4 Precautions ......................................................................................... 5 Controls and Indicators .
5 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Precautions General Please ensure that the equipment is positioned in a well ventilated area and ensure that there is as least 4" (10 cm) of free space along the sides, top and back of the unit. Use the unit on a firm, level surface free from vibration.
6 Controls and Indicators Front panel Reference page 0 1. Disc T ray .......................................................................................... 18 0 2. Surround Effect Buttons .......................................................... 29, 30 0 3.
7 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Display 0 1. Left Front Speaker Indicator 0 2. Low Frequency Effect Indicator 0 3. Center Speaker Indicator 0 4. Right Front Speaker Indicator 0 5. Subwoofer Indicator 0 6. Left Surround Speaker Indicator 0 7.
8 Controls and Indicators (continued) Remote control Reference page 0 1. Remote Control T ransmitter 0 2. CD Memory Button 0 3. Set Up Menu Select Buttons .................................................. 31 - 34 0 4. Menu Button ....................
9 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speaker system 0 1. Woofer 0 2. T weeter 0 3. Subwoofer 0 4. Speaker Wire for SUBWOOFER T erminals 0 5.
10 System Connections FM antenna Front speaker (left) AC outlet ( AC 120 V , 60 Hz ) Preparation for Use – System Connections – AM loop antenna Front speaker (right) Surround speaker (left) Surround speaker (right) Center speaker *CD_DD4500_P10_14 2001.
11 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Connections (continued) Speaker connection Front speakers Main terminals: Connect the black wire to MAIN(–) terminal and the blue wire to the MAIN(+) terminal. Subwoofer terminals: Connect the black wire to the SUBWOOFER(–) terminal and the red wire to the SUBWOOFER(+) terminal.
12 Surround speakers: The surround speakers should be installed on the wall. Install them 23-5/8" - 35-7/16" (60 - 90 cm) above the height of your ears when seated, if possible (see page 13). When the surround speakers are installed vertically , the speaker badge will be upside down.
13 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Preparation for Use – Speakers – Connecting the AC power cord After checking all the connections have been made correctly , plug the AC power cord of this unit into the AC outlet. If you plug in the unit first, the unit will enter the demonstration mode (see page 15).
14 Battery installation Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included. 1. Remove the battery cover . 2. Insert the batteries according to the direction indicated in the bat- tery compartment. When inserting or removing the batteries, push them toward the ë battery termi- nals.
15 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Demonstration mode The first time the unit is plugged, the unit will enter the demonstration mode. Y ou will see words scroll. T o cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X- BASS/DEMO button.
16 Sound Control V olume control Main unit operation: When the VOLUME control is turned clockwise, the volume will increase. When it is turned counterclockwise, the volume will decrease. Remote control operation: Press the VOLUME UP button to increase the volume and the VOLUME DOWN but- ton for decreasing.
17 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T o confirm the time display: Press the CLOCK button. The time display will appear for about 5 seconds. Note: The “CLOCK” or time will flash at the push of the CLOCK button when the AC power supply is restored after a power failure or after unplugging the unit.
18 Listening to a CD (CDs) 1 Press the POWER button to turn the power on. 2 Press the CD button. 3 Press the 7 7 7 7 7 OPEN/CLOSE button to open the disc tray . 4 Place the CD(s) on the disc tray , label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray , then place the CD in the open position.
19 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7 Press the 0/R 0/R 0/R 0/R 0/R ( 0 R 0 R 0 R 0 R 0 R ) button to start playback. Playback will begin from track 1 on the disc you have selected to play . After that disc finishes playing, the next disc will automatically play .
20 Repeat Play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. T o repeat all tracks on up to 3 discs: Press the 0/R ( 0 R ) button twice. T o repeat a desired track: Perform steps 1 - 4 in the “Programmed Play” section and then press the 0/R ( 0 R ) button twice.
21 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Programmed Play 1 While in the stop mode, press one of the s s s s s 1 - s s s s s 3 buttons to select the de- sired disc. 2 Press the 5 5 5 5 5 3 3 3 3 3 PRESET X X X X X or W W W W W PRESET 2 4 2 4 2 4 2 4 2 4 button to select the desired track.
22 T o receive an FM stereo transmission: Press the TUNER (BAND) button so that the “ST” indicator lights up. “ j ” will appear when an FM broadcast is in stereo. If the FM reception is weak, press the TUNER (BAND) button so that the “ST” indi- cator goes out.
23 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T o recall a memorized station Press the 5 5 5 5 5 3 3 3 3 3 PRESET X X X X X or W W W W W PRESET 2 2 2 2 2 4 4 4 4 4 button for less than 0.5 seconds to select the desired station. Memorizing a station Y ou can store 40 AM and FM stations in memory and recall them at the push of a button.
24 Listening to a Cassette T ape (T APE 1 or T APE 2) 1 Press the POWER button to turn the power on. 2 Open the cassette door by pushing the area marked “ 7 7 7 7 7 PUSH EJECT”. 3 Load the cassette into the T APE 1 or T APE 2 cassette compartment with the side to be played facing toward you.
25 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T ape Recording – Recording from the Radio – 1 T une in to the desired station (see page 22). 2 Load a cassette into the T APE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed.
26 T ape Recording – Recording from a CD (CDs) – Y ou can record 3 CDs continuously . 1 Press the POWER button to turn the power on. 2 Load a cassette into the T APE 2 cassette compartment with the side to be recorded on facing you. Wind past the leader of the tape, on which recording cannot be performed.
27 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Y ou can record from T APE 1 to T APE 2. For recording, use only normal tapes. Do not use metal and CrO 2 tapes. 1 Press the POWER button to turn the power on. 2 Load a prerecorded cassette into the T APE 1 cassette compart- ment.
28 When you connect this unit to a DVD player which is playing a disc with the trademark, you can enjoy realistic, powerful sound by playing back the recorded signal through 5 speakers with the sound coming from the front left, front right, center , sur- round left and surround right speakers.
29 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Enjoy the Surround Sound Normal/Phantom/Bypass mode When you connect this unit to other equipment (DVD player , VCR, etc.) which is play- ing sound sources that have the or trademarks, you can enjoy Dolby surround sound.
30 Enjoy the Surround Sound (Continued) V irtual Dolby Surround Three-dimensional stereo image processing modifies the sound for the 2 front speak- ers to make it seem as if surround speakers were being sent signals, even though they are not actually used.
31 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speaker size setting 1 Press the MENU button repeatedly to select “SP SIZE”. 2 Within 8 seconds, press the ITEM button to select “FRONT”.
32 Changing the Speaker Setting (Continued) Speaker delay setting The best sound will be achieved by placing the front speakers, center speaker and surround speakers at the same distance from the listener .
33 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Speaker level setting The output level of each speaker can be adjusted. 1 Press the MENU button repeatedly to select “SP LEVEL”. 2 Within 8 seconds, press the ITEM button repeatedly to select the speaker (CENT , RSUR, LSUR or SWFR) you want to adjust.
34 Changing the Speaker Setting (Continued) Dynamic range setting DVD discs have a wider dynamic range (sound volume range) than existing VHS vid- eotapes or CD discs. If they are played in home systems, there may be too much difference between the loud and quiet sounds.
35 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description of T erminology Surround Operation – Description of T erminology – Dolby Pro Logic Surround: This refers to the Dolby Surround sound decoder system which is used for movies. Using 4 channels, the sound effects, dialog, sound direction, music, etc.
36 1 Press the POWER button to turn the power on. 2 Press the CD, TUNER (BAND) or T APE (1 V V V V V 2) button to select the desired function. T o select the timer playback source: CD, TUNER (BAND) or T APE (1 V 2). T o select the timer recording source: TUNER (BAND).
37 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 Press the TUNING/TIME ( W W W W W or X X X X X ) button to specify the minute, then press the MEMOR Y/SET button. 7 The unit will enter the timer stand-by mode automatically . T o cancel the timer playback/timer recording: Press the POWER button to turn the power on.
38 Advanced Features – Enhancing Y our System – Cords required to connect an external unit When external units are connected, commercially available cords are needed. Enhancing Y our System T o the digital output jack Optical digital cord (not supplied) T o the line output jack VCR etc.
39 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Enhancing Y our System (Continued) T o record on a tape from DVD or VCR etc. 1 Load a cassette in the T APE 2 cassette compartment. 2 Press the DVD/VCR button. T o select the unit connected to the DVD jack Press the DVD/VCR button repeatedly to select “DVD”.
40 References – Troubleshooting Chart – T roubleshooting Chart Many potential “problems” can be resolved by the owner without calling a service tech- nician. If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center .
41 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 T roubleshooting Chart (continued) References – T roubleshooting Chart – ■ Remote control Symptom ● The remote control does not op- erate.
42 When TIMER indicator is flashing The unit will be overheated when TIMER indicator is flashing. Due to a problem in the speaker circuit, the unit will enter the stand-by mode automatically . In this case, take the following corrective actions. 1 . Unplug the AC power plug from the AC outlet.
43 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Cleaning the tape-handling parts Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.
44 References – Specifications – CD player T ype 3-disc multi-play compact disc player Signal readout Non-contact, 3-beam semiconductor laser pickup D/A converter 1-bit D/A converter Frequency response 20 - 20,000 Hz Dynamic range 100 dB (1 kHz) T uner Frequency range FM: 87.
45 CD-DD4500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Front speaker with subwoofer T ype 3 - way , 5-1/8" (130 mm) subwoofer , 4" (100 mm) woofer and 2" (50 mm) tweeter Maximum input power S.
MEMO.
MEMO.
Printed in Malaysia A0104.YT CD-DD4500 Mini Component System TINSE0378AWZZ SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07430-2135 SHARP CORPORA TION 9906 CONSUMER LIMITED W ARRANTY .
Ein wichtiger Punkt beim Kauf des Geräts Sharp CD-DD4500 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp CD-DD4500 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp CD-DD4500 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp CD-DD4500 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp CD-DD4500 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp CD-DD4500 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp CD-DD4500 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp CD-DD4500. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp CD-DD4500 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
