Benutzeranleitung / Produktwartung AL-1551 des Produzenten Sharp
Zur Seite of 54
Digital Laser Copier/Printer Operation Manual MODEL AL-1551.
FOR Y OUR PR O TECTION... T o aid in repor ting this compact copier in case of loss or theft, please record below the model number and serial number located on the bac k of the unit. W e also suggest you record all the inf or mation listed and retain f or future ref erence.
1 CONTENTS 1 GETTING ST AR TED INTRODUCTION 3 CA UTIONS 3 MAIN FEA TURES 4 P AR T NAMES 6 OPERA TION P ANEL 7 2 INSTALLATION COPIER INST ALLA TION 8 CA UTIONS ON HANDLING 9 CHECKING P ACKED COMPONENTS.
2 5 SUPPLIES AND USER MAINTENANCE TD CAR TRIDGE REPLACEMENT 29 DR UM CARTRIDGE REPLA CEMENT 30 USER MAINTENANCE 32 – Cabinet 32 – Original table and original cov er 32 – T ransf er charger 33 .
3 1 Getting star ted 1 GETTING ST AR TED This chapter provides basic inf or mation f or using the copier . INTR ODUCTION This copier has been designed to provide intuitiv e operating ease while requiring a minimum amount of space. T o get full use of all copier f eatures, be sure to f amiliarize yourself with this manual and the copier .
4 1 Getting star ted CA UTIONS ● Place the copier on a firm, lev el surf ace. ● Do not install the copier in a humid or dusty location. ● When the copier is not used f or long time, f or example f or consecutiv e holidays, tur n the po wer s witch off and remove the po wer cord from the outlet.
5 1 Getting star ted MAIN FEA TURES Substantial copying functions ● Zoom cop ying from 50% to 200% in 1% increments can be performed. ● Continuous cop ying of maximum 99 sheets can also be perf or med. ● A utomatic document feeding through the re versing single pass f eeder (RSPF) can be perf or med.
6 1 Getting star ted P AR T NAMES RSPF e xit area Original guides F eeding roller cover Document f eeder tray T ransf er charger TD car tridge lock release button TD car tridge Drum car tridge Drum ca.
7 1 Getting star ted OPERA TION P ANEL Original to copy ke y and indicators : T wo-sided copies from one- sided originals. T ur n on Long Edge or T ur n on Shor t Edge can be selected. : T wo-sided copies from two- sided originals. (Can be selected only when the RSPF is used.
8 2 Installation 2 INST ALLA TION F ollow the installation procedure below to use the copier properly . COPIER INST ALLA TION Improper installation ma y damage the copier . Please note the follo wing during initial installation and whenev er the copier is mov ed.
9 2 Installation Be sure to allow the required space ar ound the machine f or ser vicing and pr oper ventilation. A small amount of ozone is produced within the copier during operation. The emission le vel is insufficient to cause an y health hazard. NO TE: The present recommended long ter m e xposure limit f or ozone is 0.
10 2 Installation CHECKING P A CKED COMPONENTS AND A CCESSORIES Open the car ton and check if the f ollowing components and accessories are included. Copier P ower cord TD car tridge Drum car tridge (.
11 2 Installation REMO VING PR O TECTIVE P A CKING MA TERIALS 1 Remov e all pieces of tape shown in the illustration belo w . Then open the original cov er and remov e protectiv e mater ials , and . 2 Use a coin (or suitable object) to remo ve the scre w .
12 2 Installation INST ALLING THE TD CAR TRIDGE 1 Open the bypass tr ay and then open the side co ver while pressing the side co ver open button. Bypass tray 2 Remov e the CA UTION tape from the front cov er and remov e the two protective pins from the fusing unit by pulling the strings upward one at a time .
13 2 Installation INST ALLING THE TD CARTRIDGE 5 Gently inser t the TD car tridge until it locks in place. 6 Close the front cov er and then the side cov er by pressing the round projections near the side cov er open button. When closing the cov ers, be sure to close the front cov er securely and then close the side cov er .
14 2 Installation LO ADING COPY P APER 2 Remov e the pressure plate lock. Rotate the pressure plate lock in the direction of the arrow to remov e it while pressing down the pressure plate of the paper tr ay .
15 2 Installation LO ADING COPY P APER 6 Gently push the paper tra y back into the copier . After loading cop y paper , to cancel the blinking “ P ” without restar ting cop ying, press the clear ( ) ke y . The “ P ” in the display will go out and the ready ( ) indicator will light up .
16 2 Installation PO WER ON T ur n the po wer s witch on the left side of the copier to the “ ON ” position. The ready ( ) indicator will light up and other indicators which show the initial settings of the operation panel will also light up to indicate the ready condition.
17 3 Making copies 3 MAKING COPIES This chapter describes basic copying functions and some other cop ying functions using the b ypass tray . P APER F or best results, use only paper recommended by SHARP . T ype of paper T ype of media Size W eight f eeding P aper tr ay Standard paper Letter (8-1/2" x 11") 15 lbs.
18 3 Making copies NORMAL COPYING This copier has two document input stations - a re v ersing single pass feeder (RSPF) f or automatic document f eeding and an original table for man ual handling of documents.
19 3 Making copies NORMAL COPYING A. When using the RSPF: (1) Mak e sure that no original is left on the or iginal table . (2) Adjust the original guides to the size of originals.
20 3 Making copies NORMAL COPYING When cop ying a book or an original which has been folded or a crumpled original, press down the original cover lightly .
21 3 Making copies ZOOM Tens digit Unit digit NORMAL COPYING 5 Ensure that the desired paper tra y is selected. ● P aper sizes that can be used in the duple x copy mode are letter , legal, and in voice. (When cop ying from the or iginal tab le in the duple x copy mode, only letter size paper can be used.
22 3 Making copies NORMAL COPYING 8 When making two-sided copies from the original table , place the second original on the original table and press the print ( ) k ey . T o cancel two-sided cop ying after scanning the first original, press the clear ( ) k ey .
23 3 Making copies EXPOSURE ADJUSTMENT/PHO TO COPYING 3 Use the light ( ) and dark ( ) k eys to adjust the e xposure lev el. If e xposure lev el 2 is selected, the two left-handmost indicators f or that le vel will light up simultaneously .
24 3 Making copies REDUCTION/ENLARGEMENT/ZOOM T o decrease or increase the zoom ratio r apidly , press and hold down the or k ey . Howe v er the value will stop at the preset reduction or enlargement ratios. T o move be yond these ratios , release the ke y and then press and hold it down again.
25 3 Making copies BYP ASS FEED T o close the bypass tra y , perf or m step1 and then step 2 in the illustration and push the round projections at the right of the tray until they clic k. 3 Set the paper guides to the cop y paper width. Inser t the copy paper (print face do wn) all the wa y into the bypass tra y .
26 4 Special functions SPECIAL FUNCTIONS DESCRIPTION OF SPECIAL FUNCTIONS This chapter describes the special functions of this copier . Use these functions as needed.
27 4 Special functions T ONER SA VE MODE 2 Press and hold down the e xposure mode selector ke y for appro ximately 5 seconds. The manual ( ) indicator will go out and the photo ( ) indicator will begin to blink. The exposure indicator mark ed “ 5 ” will light up , indicating the standard toner mode is activ e.
28 4 Special functions USER PROGRAMS 3 Press the print ( ) k ey . The entered program number will be steadily lit and the currently selected parameter number f or the program will blink on the right side of the displa y . 4 Select the desired parameter using the right cop y quantity ( ) ke y .
29 5 Supplies and user maintenance 5 SUPPLIES AND USER MAINTENANCE This chapter describes how to replace the TD car tr idge and the drum car tr idge . Be sure to use only genuine SHARP par ts and supplies . TD CAR TRIDGE REPLA CEMENT The TD car tr idge replacement required ( ) indicator will light up when toner is needed.
30 5 Supplies and user maintenance TD CARTRIDGE REPLA CEMENT 3 Install a new TD car tr idge. T o install the new car tridge, see page 12, INST ALLING THE TD CAR TRIDGE . 4 Close the front cov er and then the side cov er by pressing the round projections near the side cov er open button.
31 5 Supplies and user maintenance DRUM CAR TRIDGE REPLA CEMENT 4 Remov e the new drum car tridge from the protective bag and remov e the protective cov er from the car tridge. Then gently install the new drum car tr idge . Do not touch the surf ace of the drum (green por tion) of the car tridge.
32 5 Supplies and user maintenance USER MAINTENANCE Proper care is essential in order to get clean, shar p copies. Be sure to take a f ew min utes to regularly clean the copier . Bef ore cleaning, be sure to tur n the power s witch off and remov e the power cord from the outlet.
33 5 Supplies and user maintenance USER MAINTENANCE T ransfer c harg er If copies star t becoming streaky or blotch y , the transf er charger may be dir ty .
34 5 Supplies and user maintenance When copier is not in use T o prev ent entr y of dust and f oreign matter , store the copier as follo ws. 1 Remov e the power cord and secure the copier using tape (f our locations).
35 6 Copier trouble? 6 COPIER TR OUBLE? This chapter describes misfeed remov al and troubleshooting. MISFEED REMO V AL When the misfeed ( ) indicator b links or blinks in the displa y , the copier will stop because of a misfeed. If a misf eed occurs when using the RSPF , a number ma y appear in the display after a min us sign.
36 6 Copier trouble? MISFEED REMO V AL A Misfeed in the paper feed area 1 Gently remov e the misf ed paper from the paper feed area as sho wn in the illustration. When b links in the display and the misf ed paper is not seen from the paper feed area, pull out the paper tra y and remov e the misf ed paper .
37 6 Copier trouble? MISFEED REMO V AL ● Do not touch the surf ace of the drum (green por tion) of the dr um cartr idge when removing the misf ed paper . Doing so ma y cause smudges on copies. ● Do not remov e the misf ed paper from abov e the fusing unit.
38 6 Copier trouble? 3 Rotate the f eeding roller in the direction of the arrow and gently remov e the misf ed paper from the e xit area. F eeding roller 4 Raise the fusing unit release lev er , close the front cov er and then close the side cov er b y pressing the round projections near the side cov er open button.
39 6 Copier trouble? MISFEED REMO V AL E Misfeed in the RSPF An original misfeed ma y occur at one of three locations: if the misfed original is seen from the document f eeder tra y , (A) in the document f eeder tray; if the misfed original is not seen from the document f eeder tra y , (B) in the e xit area or (C) under the feeding roller .
40 6 Copier trouble? MISFEED REMO V AL (C) If the or iginal does not mo ve easily into the e xit area, remov e it in the direction of the arrow while rotating the knob . A number ma y appear in the display after a minus sign, indicating the n umber of the originals that must be retur ned to the document f eeder tray .
41 6 Copier trouble? TR OUBLESHOO TING If any prob lem occurs, chec k the list below bef ore contacting our T echnical Assistance Depar tment. See page: 15 16 – – 18 26 26 43 22 32 22 Solution Copier does not operate. Blank copies Copier plugged in? Prob lem Possib le cause Plug the copier into a grounded outlet.
42 6 Copier trouble? ST A TUS INDICA T ORS When the f ollowing indicators light up or blink on the oper ation panel or the follo wing alphanumer ic codes appear in the displa y , solve the prob lem immediately ref erring to both the table below and the relev ant page.
43 6 Copier trouble? A UT OMA TIC EXPOSURE ADJUSTMENT The automatic exposure le vel can be adjusted to suit y our copying needs. This lev el is set for cop ying from the or iginal tab le and copying from the RSPF respectiv ely .
44 7 Appendix 7 APPENDIX SPECIFICA TIONS T yp e Digital laser copier/printer , desk-top type Copy system Dr y , electrostatic transfer Originals Sheets, bound documents Original siz e Max.
45 7 Appendix Memor y 6 MB P ower supply A C 120V (±10%), 60 Hz (±2%) P ower consumption 1,000 W Ov erall dimensions 31.9" (W) x 18.8" (D) (809 mm (W) x 477 mm (D)) W eight 54.3 lbs. (24.6 k g ) (Appro ximately) TD and drum car tr idges included Copier dimensions 20.
46 7 Appendix SUPPL Y P AR T NUMBERS AND ST ORA GE When ordering supplies, please use the correct par t numbers as listed below . Be sure to use only genuine SHARP par ts and supplies .
47 7 Appendix MO VING INSTR UCTIONS When moving this copier , follo w the procedure below . When moving this copier , be sure to remov e the TD car tr idge in adv ance. 1 T ur n the po wer s witch off and disconnect the power cord. 2 Ensure that the bypass tr ay is open and then open the side co v er while pressing the side cov er open button.
INDEX A A uto clear . . . . . . . . . . . . . . . . . . . . 26, 27 A utomatic e xposure adjustment . . . . . . 43 A uto power shut-off mode . . . . . . . . 26, 27 B Bypass tra y . . . . . . . . . . . . . . . . . . . . . . 24 C Cautions . . . . . . . .
P P ack ed components . . . . . . . . . . . . . . . 10 P aper – loading . . . . . . . . . . . . . . . . . . . . . . . . 13 – special . . . . . . . . . . . . . . . . . . . . . . . . 17 – specifications . . . . . . . . . . . . . . . . . . . 17 P aper f eed area .
.
For users in the USA This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRINTED IN CHINA 2001J KS TINSE0679QSZZ SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07430-2135. www.sharp-usa.com SHARP ELECTRONICS OF CANADA LTD.
Ein wichtiger Punkt beim Kauf des Geräts Sharp AL-1551 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sharp AL-1551 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sharp AL-1551 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sharp AL-1551 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sharp AL-1551 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sharp AL-1551 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sharp AL-1551 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sharp AL-1551. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sharp AL-1551 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
