Benutzeranleitung / Produktwartung 67372 des Produzenten Seymour Duncan
Zur Seite of 59
Owners Manual V ineyard Seeder Pt. No. 67372 Issue 0806 Head Office: P .O. Box 2018 Hilton Highway , W ashdyke T imaru, New Zealand T elephone (03) 688 2029 Facsimile (03) 688 2821 Australian Branch: .
.
1 Introduction Acquisition and W arranty . . . . . . . . . . 2 The Owner ’s Manual . . . . . . . . . . . . . . 2 Description of Machine Working Principle . . . . . . . . . . . . . . . . 3 Specification . . . . . . . . . . . . . . . . . . . . . . . .
2 Introduction Acquisition & W arranty On delivery of your new Duncan Ag Vineyard Seeder please check that the machine is not damaged. In cases of shipping damage, please ask your dealer to arrange for the appropriate claim to be lodged immediately .
3 Description of Machine The Duncan Ag Vineyard Seeder is either a single curved disc or double disc drill with dual boxes for seed and fertilizer . The drill is carried and operated from the three point linkage of the tractor . The sowing depth control is achieved from two trailing wheels with individual wheel retraction stops.
4 Do not ride or allow p assengers on the machine. Under no circumstances are p assengers to be permitted on the machine while it is in operation or being transported. Any footboards and/or footstep s are provided solely for the purpose of preparing the machine for use.
5 SAFETY - General This section of the manual offers general guidelines for the safe operation of machinery . It does not replace local safety regulations. These guidelines were current at the time of publication, but may be superseded by later regulations.
6 SAFETY - General (Continued) Appropriate Dress Wear close fitting clothing and avoid rings or other forms of jewellery which could become caught in the machinery . People with long hair must have it securely fixed and confined close to the head. Refer to local safety standards for protective clothing and recommended safety equipment.
7 SAFETY - General (Continued) Handle Agricultural Chemicals Safely All farm chemicals should be stored, used, handled and disposed of safely and in accordance with the supplier ’s/manufacturer ’s recommendations.
8 SAFETY - General (Continued) Practise Safe Maintenance Keep the machine in safe working condition. Routine maintenance and regular servicing will help reduce risks and prolong the life of the machine. General Maintenance Accidents occur most frequently during servicing and rep air .
9 Pt. No. 67372 Issue 0806 SAFETY - Machine S pecific This section of the manual gives specific guidelines for the safe operation of the Vineyard Seeder . These guidelines were current at the time of publication, but may be superseded by later circumstances.
10 SAFETY - Machine Specific (Continued) Hazard Point s on the Vineyard Seeder (Continued) Guards Gearbox deflection and flap handle guards are provided to avoid grape vines getting caught up in componentry . They also assist in preventing hands getting caught up in sprockets, drive chains and chain tensioners.
11 Pt. No. 67372 Issue 0806 SAFETY - Machine Specific (Continued) Safety Decals & Safety Guards Item Decal/Guard Cross Reference Qty . 1 ‘No Ride’ Refer Page 10 & 33 3 2 ‘Pinch Point/Mov.
12 T ransport 1 Raise the three point linkage as high as possible to maximise ground clearance. Ensure ground clearance is sufficient. Do not transport with the wheels in cont act with the ground. 2 Ensure that all linkage pins and security clips are fitted and are secure.
13 Sowing Speed T ypical travel speeds when sowing range from 6-12 km/hr in good conditions. In stoney and uneven ground conditions a lower speed is recommended to minimise rapid part deterioration. Sowing too fast can result in: 1 Poor contour following and uneven sowing depth.
14 V ineyard Seeder Sowing Chart Row Sp acing 180 T able 2 T est Seed T ype/ Seed Rate (kg/ha) Thousand Seed Gearbox Setting Position Hint s Wgt., TSW*(gm) Position T ype 15 20 30 40 50 60 70 80 90 100 Wheat (41.2) 3/4 3 N 82.22 103.66 122.65 144.91 167.
15 Basic Calibration Procedure Gearbox Setting Lever T o set the seed rate at the gearbox, slacken the star knob (1) by turning counter-clockwise and push from below into the position indicated in the Sowing Chart. Retighten the star knob firmly (Fig 3).
16 Basic Calibration Procedure (Continued) Seed Calibration The calibration test should be done to confirm the required seed rate and is done with the drill stationary and level. Seed Calibration Procedures 1 Remove the calibration tray from the storage brackets on the seedbox.
17 Basic Calibration Procedure (Continued) Seed Calibration Procedures (Continued) 8 T urn the crank handle clockwise the required number of revolutions as detailed in T able 3. Note The Calibration is usually done for 1/80th hectare. For very small seed rates or when using inaccurate scales (i.
18 Basic Calibration Procedure (Continued) Recalculating the Const ant It is especially import ant in arable situations to check the rolling circumference of the tyre when in the cultivated area to be sown, and if necessary , to recalculate the constant and hence the number of crank turns.
19 Basic Calibration Procedure (Continued) Calibration Deviations Deviations Between the Calibration T est and the Actual Seed Rate The most frequent cause for changes between the calibration test and the seed rate lies in the flowing properties of seed during sowing.
20 Fig 1 1 Basic Calibration Procedure (Continued) Sowing Fine Seeds For sowing fine seeds the Vineyard Seeder is equipped as standard with a combined normal and fine seed “Elite” metering wheel (1). During grain sowing and other larger varieties of seed both the normal and fine seed metering wheels are coupled and both rotate.
21 Basic Calibration Procedure (Continued) Sowing Small Seeds Calibration with Disconnected Agit ator Shaft The fine seed metering wheel used in Duncan Drills is especially well suited for sowing small seeds such as rape.
22 Hect aremeter Settings Setup Refer to the installation and operation instructions supplied with your hectaremeter kit (1) for information on inst allation, calibration, operation and servicing (Fig 15). T able 6 gives the effective working widths for the various machines depending on the machine size and the row spacing.
23 Basic Calibration Procedure (Continued) Hect aremeter Settings (Continued) Example 1 : Computronics 1 100 Area Meter Setup for 10 Run Vineyard Seeder (when fitted with 155R13 tyres) (Referring to Sowing Width T able Above) 10 Run Machine x 180mm Sp acings = 1.
24 V ineyard Seeder Calibration Notes.
25 Maintenance & Care - General General Safety and Accident Prevention Advice 1 Make sure that if the tractor remains attached to the drill that the ignition key is removed. 2 During maintenance the drill should be supported in such a manner that if hydraulic failure was to occur the machine would still be adequately supported.
26 Maintenance & Care Lubrication Instructions Y our new Duncan Ag Vineyard Seeder will give long and efficient service if given normal care and maintained properly Lubrication Precautions Keep the service area clean and dry . Only service or lubricate the machine when it is stationary and securely supported.
27 Maintenance & Care 1 Bolted Connections All bolted connections of the machine should be checked after the first 30 hours of operation and retightened if necessary and thereafter at regular intervals. It is suggested that this is done every 500 hectares or annually , whichever occurs first.
28 Maintenance & Care Maintenance Schedule (Continued) 3 Roller Chains Pedestal and agit ator drive chains (1) Fig 19 & (2) Fig 21 should first be checked after 20 hours of operation and there.
29 Maintenance & Care Maintenance Schedule (Continued) 9 Bottom Flap s (Fig 20) The required seed rate is controlled by both the metering wheels and the bottom flaps. The seed flows from the seed box into the metering wheel housings. Inside the metering wheel housing (1) the seed is caught between the metering wheel (2) and the bottom flap (3).
30 V ineyard Seeder Maintenance Notes.
31 Part s List V ineyard Seeder Head Office: P .O. Box 2018 Hilton Highway , Washdyke T imaru, New Zealand T elephone (03) 688 2029 Facsimile (03) 688 2821 Australian Branch: 4B Silverton Close Laverton North 3026 Melbourne, Australia. T elephone (02) 9314-9666 Facsimile (02) 9314-6810 From Serial Number 06148 Pt.
32 V ineyard Seeder Complete Assembly 2 23 34 4 19 13 14 14 13 16 12 9 6 1 15 21 20 3 7 11 33 8 28 35 36 37 24 26 20 21 22 32 30 29 18 18 28 27 31 25 17 45 44 43.
33 V ineyard Seeder Complete Assembly Item Part No. Description Qty . 1 Refer Page 36 Main Frame and Wheel Leg Arrangement 1 2 Refer Page 39/40 Dragbar Assemblies 10 3 Refer Page 42 Drive Arrangement .
34 V ineyard Seeder Mainframe & Wheel Leg Arrangment 4 3 1 8 17 18 12 13 6 7 10 11 11 10 9 20 19 16 2 14 15 1 5 5 15.
35 V ineyard Seeder Mainframe & Wheel Leg Arrangement Item Part No. Description Qty . 1 27710 Main Frame Assembly 1 2 27280 Front Frame Assembly (Single Coulters) 1 2 27785 Front Frame Assembly (D.
36 V ineyard Seeder Wheel Leg & Axle Assembly 5 1 3 8 5 12 13 7 6 6 7 11 14 2 14 10 6 6 7 4 9.
37 V ineyard Seeder Wheel Leg & Axle Assembly Item Part No. Description Qty . 1 27732 Drive Wheel Leg Assembly 1 2 27733 Non-Drive Wheel Leg Assembly 1 3 27740 Drive Leg Axle Welded Assembly 1 4 2.
38 V ineyard Seeder Single Disc Dragbars 19 13 18 17 14 16 15 9 20 21 30 25 1 5 7 2 4 4 3 2 6 6 8 8 31 32 27 26 37.
39 V ineyard Seeder Single Disc Dragbars Item Part No. Description Qty . 1 27350 Dragbar Assembly - LH Long 3 2 27351 Dragbar Assembly - LH Short 2 3 27352 Dragbar Assembly - RH Long 3 4 27353 Dragbar.
40 V ineyard Seeder Double Disc Dragbars 8 18 19 23 22 20 28 27 25 1 34 18 29 3 4 5 6 2 11 12 5 6 18 16 8 7 9 12 17 10 13 14 15 21 26 24 4.
Item Part No. Description Qty . 1 27785 Double Disc Front Frame Assembly 1 2 27790 Dragbar Assy . Long 5 3 27795 Dragbar Assy . Short 5 4 27766 Double Disc Coulter Assy 10 5 45445 M12 x 100 Bolt 20 6 .
42 V ineyard Seeder Complete Drive Arrangement 3 6 1 4 5 8 9 5 4 2 7 6 3 7 6 1 7 2 6 7.
43 V ineyard Seeder Complete Drive Arrangement Item Part No. Description Qty . 1 Refer Page 46 Gearbox Input Drive System 1 2 22537 25 T S procket 1/2” P x 20mm Bore (Also See ‘Seed Box Drive Shaf.
Item Part No. Description Qty . 1 22535 Nylon Roller 1 2 22480 RH Arm Assembly 1 3 22522 LH T orsion Spring 1 4 23376 Chain T ensioner Anchor 1 5 45132 M16 Half Nut 1 6 45461 M16x65 Bolt 1 44 V ineyar.
45 Item Part No. Description Qty . 1 22535 Nylon Roller 1 2 22480 RH Arm Assembly 1 3 22523 RH T orsion Spring 1 4 23376 Chain T ensioner Anchor 1 5 45132 M16 Half Nut 1 6 45461 M16x65 Bolt 1 V ineyard Seeder Rear Box Shaf t Chain T ensioner 6 1 2 3 4 5 Pt.
46 V ineyard Seeder Gearbox Input Drive System Item Part No. Description Qty . 1 26568 Hexagonal Drive Shaft (Left Hand Thread) 1 2 43876 Drive Cassette 21/21T 1 3 27764 Hexagonal T ransfer Drive Shaf.
47 8 5 5 3 2 6 4 8 7 6 9 1 5 5 4 9 Item Part No. Description Qty . 1 22537 S procket, 25T x 1/2” Pitch, 20mm Bore 1 2 22294 Key , S procket 6 x6 x 25 1 3 25758 Shaft, Box Drive 1 4 43385 “Y” Bea.
48 V ineyard Seeder Gearbox Final Assembly 10 10 13 4 2 11 12 8 9 11 10 9 7 13 10 11 12 10 8 12 11 3 11 6 10 10 5 1 14, 15, 16, 17 2 7.
49 V ineyard Seeder Gearbox Final Assembly Item Part No. Description Qty . 1 25756 Gearbox Sub-Assembly 1 2 22036 Quadrant, S peed Adjusting 2 3 25754 Lever , Front, S peed Adjusting 1 4 25755 Lever ,.
50 V ineyard Seeder Seedbox Assembly 40 1 10 11 12 24 23 23 5 33 25 36 33 25 32 37 17, 21, 28 25, 30, 33, 30 14, 29 7, 27, 21 25, 33, 36 25, 33, 35 9 8 21 27 31 21 22 28 4 38 6 Lid Hinge Det ail Locat.
51 V ineyard Seeder Seedbox Assembly Item Part No. Description Qty . 1 27400 Combi Box Complete Assembly 1 2 27410 Combi Box with Lid 2 3 Refer Page 53 Agitator Assembly (Inside Box) 2 4 Refer Page 54.
52 Item Part No. Description Qty .* ** 1 22414 Agitator Drive Rear Housing 1 2 22415 Agitator Drive Front Housing 1 3 22416 Agitator Drive S pacer 2 4 22418 3/8” Pitch x 20mm Bore 21T S procket 2 5 .
53 Item Part No. Description Qty .* 1 27440 Agitator Shaft Assembly 1 3 22420 16mm Agitator Joining Collar 1 4 22423 Agitator Shaft Support RH (Short) 1 5 22424 Agitator Shaft Support LH (Long) 1 6 22.
54 1 1 2 3 3 4 4 5 6 6 7 7 8 8 9 9 10 10 11 12 13 V ineyard Seeder Seeder Mechanism.
55 Item Part No. Description Qty .* 1 43375 Metering Housing 20 2 43376 Shutter Slide 20 3 43377 Seed Metering Wheel Assembly (Includes item 4) 20 4 43374 Fine Seed Wheel (For S pares Ordering Only) 5.
2 56 V ineyard Seeder Press Wheel Arrangement 5 4 3 18 12 7 6 16 10 8 13 19 9 14 11 15 17 1 Note position of RH Press Wheel Arm.
57 V ineyard Seeder Press Wheel Arrangement Item Part No. Description Qty . 1 43880 13” x 48mm Press Wheel 1 2 27805 Press Wheel Mount Assy 1 3 27800 LH Press Wheel Arm Assy 1 3 27802 RH Press Wheel Arm Assy 1 4 43872 Bearing 2 5 26890 Bearing S pacer 16.
Ein wichtiger Punkt beim Kauf des Geräts Seymour Duncan 67372 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Seymour Duncan 67372 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Seymour Duncan 67372 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Seymour Duncan 67372 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Seymour Duncan 67372 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Seymour Duncan 67372 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Seymour Duncan 67372 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Seymour Duncan 67372. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Seymour Duncan 67372 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
