Benutzeranleitung / Produktwartung ALH-616ds des Produzenten Acer
Zur Seite of 32
Dual-Speed Ethernet Hub User's Guide ALH-616ds A c e rHub.
.
.
.
.
Quick Installation Guide 1. Unpack the AcerHub ALH-616ds dual-speed Hub and it'saccessories (refer section 1.3). 2. Connect the Hub to the external Power supply (refer to section 2.4.1) 3. Use the normal ports to connect to PCs and computers. 4. Use the uplink port to connect to another hub or LAN switch.
C ongratulations on your purchase of the AcerHub 616ds. The AcerHub ALH- 616ds is a 16-port dual-speed fast Ethernet repeater hub for connection with multiple PCs to a workgroup LAN (Local Area Network) environment to sharenetwork resources.
large network,refer section 3.1 for details.) • Built-in switch auto-disable function to avoid data looping when stacking • External switching power supply for lower power consumption and heat emission • Compact design for SOHO desktop environment for easy networking 1.
This chapter will guide you through how to install the AcerHub ALH-616ds. It includes procedures for connecting to the external power supply , installing the hub on your working surface, connecting the Hub to your computer , and guidelines to see if it works well.
Figure 2-1 Get the hub and power adapter 2.1.2 Place the hub on the desktop and remove the packing box of the power adapter , as shown in Figure 2-2. Figure 2-2 Put the hub on desktop and find the pro.
2.1.3 V erify it's a 5V ,3A power adapter by looking at the indicating label. If the adapter is correct, please stretch the cable and plug the cord into the power jack of the hub, as shown in Figure 2-3. AcerSOHO Series Figure 2-3 Connect to the power adapter 2.
2.1.5 Plug the power cord into the outlet on the wall and check if the power LED lights up. If it lights up, then the hub is ready to be connected to the network, as shown in Figure 2-5.
Figure 2-6 Lay hub on stable desktop 2.2.2 If you are installing more than one hub, please turn off the power of all hubs first. Then you can get another hub and place it above the previous one on the working surface, as shown in Figure 2-7.
2.2.3 Get the stackable cable and connect the cable to the stacking connectoron the hub, as shown inFigure 2-8. Connect "Down" SCSI port of the upperhub to "Up" SCSI port of the lower hub. Any loose connection of the stackablecable will cause problems with network performance and quality .
Figure 2-9 Stack multiple hubs together 2.3 Connecting to computers 2.3.1 Make sure the hub is ready for networking by checking if the PWR indicator displays. 2.3.2 See if the computer is working and find the RJ-45 connector of the adapter card in computers.
2.3.3 Arrange the route for cabling if no fixed cabling box is provided. Otherwise, It's right way to connect from your computer to the fixed cabling box on your working surface and plug the other end of the cable to the RJ- 45 connector on the hub, as shown in Figure 2-1 1.
Figure 2-12 Check the Link LEDs both on hub and adapter card 2.4 Does the hub work well? Y ou can observe the LED status to see if the hub works fine. The meanings of LEDs are defined in section 2.4.1. 2.4.1 LED overview The locations of LED indicators are shown in Figure 2-13.
There are three groups of LED indicators in the front panel: • System status indicators: Indicate the overall system status of the hub. It includes system PWR, Fan Err .
2.4.3 Network Status Indicators There are 3 LED indicators to indicate the network status of each connection port. Note : It's normal either Master or Slave LED will display when hubs are stacking. Note : The difference between Master hub and Slave hub will be explained in chapter 3.
6 4 8 Figure 2-15 Network Status Indicators 100/10 : Indicates if the port is working at 100Mbps or 10Mbps. Color On/Off Indication Green On 100Mbps Off 10Mbps LNK/ACT : Indicates if the port is linked to another port or receiving data. Color On/Off Indication Green On Link succeeds Blink Receiving Off Link fails 2.
The number of utilization is in percentage. For example, "15" of "100M" means 15% of 100Mbps, "55+" of "10M" means the utilization is more than 55% of 10Mbps.
This chapter describes the network topology for hybrid 10Mbps and 100Mbps networks, cabling requirement for connections, the interoperability between hubs and switches and the function of bridge Up-Link port. Please turn over the page to see the different T opologies.
Figure 3-2 Master and Slave hubs in stacking ALH-616ds. Note : 1. T o concern the convenience of the cross-wiring connection between hubs, ALH-616ds provide 1 normal port (marked as "II) and 1 cross-over port (marked as "X"). These 2 ports are wired to each other by different wiring assignments.
• By way of an uplink port with a Bridge function, the limitations on 100Mbps hub count(maximum 2) can be eliminated. The hub count is unlimited and cable length between hubs can reach 100 meters, as shown in Figure 3- 4. Figure 3-4 Unlimited cascading of ALH-616ds.
• The data in 10Mbps or 100Mbps domain will be inter-connected by internal built-in switch in the Master hub consequently . • All hubs delivering data by the shared-bus always work on half-duplex mode;that is, data can be sent or received at one time in one direction.
3.2.2 Connecting to Ethernet Switches : The factors governing hub and switch interconnection are: • The hubs are only connected to Ethernet switches by an uplink port.
Symptoms All LEDs are off Link LED of a connected port is off 100 LED is not lit when connected to a 100 NIC or 100 Hub(but Link LED is lit.) Possible Reason Suggestions The hub is not receiving DC power 1.The UTP cable is not securely connected 2.The port is bad 3.
LED state Stacking condition Result & action Malfunction, Contact your vendor For all ALH-616ds ,both standalone and stacking condition Both Master And Slave Led lit on None or Master and Slave LE.
Appendix A.Specifications Network Interface 16-port 10/100 dual-speed auto-detection function • 10Mbps Ethernet IEEE 802.3 10Base-T • 100Mbps Ethernet IEEE 802.3u 100Base-TX One of the ports(Port NO.1)has two RJ-45 connector to provide either normal or uplink connection.
Product Limited Warranty Acer Netxus Incorporated (ANI) warrants its product to be free from defects in materials and workmanship, under normal use and service, for the following lengths of time from the date of purchase from ANI or its Authorized Resellers.
Acer Computer International Ltd. T aiwan Branch T el: 886-2-2713 9099 ext.7293 Fax: 886-2-2718 4895 http://www .aci.acer .com.tw Acer America Corporation T el: 1-408-432 6200 Fax:1-408-922 2993 http://www .acer .com/aac Distribution/Information Hotline: 1-800-369 6736 Fax: 1-408-432 0496 http://www .
100% Recyclable Paper Acer Netxus Inc. A Communications Company of Acer P/N: 49.22013.101.
Ein wichtiger Punkt beim Kauf des Geräts Acer ALH-616ds (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Acer ALH-616ds noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Acer ALH-616ds - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Acer ALH-616ds reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Acer ALH-616ds erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Acer ALH-616ds besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Acer ALH-616ds verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Acer ALH-616ds. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Acer ALH-616ds gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
