Benutzeranleitung / Produktwartung EK 3041-U des Produzenten Sennheiser
Zur Seite of 25
27 EK 3041-U Instructions for use Diversity Receiver.
28 Thank you for choosing Sennheiser! We have designed this product to give you reliable operation over many years. Please take a few moments to read these instructions carefully, as we want you to enjoy your new Sennheiser product quickly and to the full.
29 1 Brief description The EK 3041-U is a miniature true diversity radiomicrophone receiver designed for use with the new digital ENG camcorders. It can be inserted in the slot-in facility of most professional camcorders such as the Philips LDK 120, Ikegami Hl-77 or Sony SX.
30 4 Noise reduction with HiDyn plus ® This receiver is equipped with HiDyn plus ® , the Sennheiser noise reduction system that reduces RF interference.
31 electronic switching from one signal to another receiver 2 receiver 1 AF-signal AF-signal 5 Diversity reception The EK 3041-U receiver operates on the „true diversity“ principle: A receiving an.
32 햲햳 햴 햶 햷 햸 햵 햲 SET button for menu selection and programming 햳 Antenna socket, diversity branch A 햴 ON / OFF switch 햵 Multi-function display panel 햶 Button for adjusting the.
33 Your EK 3041-U receiver is supplied with two antenna which are necessary for true diversity operation (see chapter 5). The length of the antenna has been matched to the frequency range of your EK 3041-U receiver. Insert the antenna into sockets 햳 and 햸 and screw them tight.
34 PHILIPS 8 Mounting the EK 3041-U into the Philips LDK 120 camcorder Preparation: Mount the base plate suitable for the Philips camcorder and fix it to the left and right of the receiver by means of two screws. The Philips adaptor features a 44-pin connector (accessories).
35 IKEGAMI 9 Mounting the EK 3041-U into the Ikegami HL-V77 camcorder Preparation: Mount the base plate suitable for the Ikegami camcorder and fix it to the left and right of the receiver by means of two screws. The Ikegami adaptor features a 25-pin connector (accessories).
36 SONY 10 Mounting the EK 3041-U into the Sony SX camcorder Preparation: Mount the base plate suitable for the Sony camcorder and fix it to the left and right of the receiver by means of two screws. The Sony adaptor features a 15-pin connector (accessories).
37 11 Power supply Your EK 3041-U receiver can be powered from different power sources. The adaption to these power sources is via the plug-in connector at the bottom of the receiver and the corresponding accessories. The EK 3041-U can be powered • directly via the camcorder with 12 V or 5.
38 14 Display of receiving frequency or channel number You can choose the content of the display i.e. whether the preselected receiving frequency or its respective channel number is indicated. To do so, please proceed as follows: 씰 If you press button , the preselected receiving frequency is indicated.
39 씰 Press the SET button three times to select a receiving frequency ( see chapter 19). 씰 Press the SET button four times to assign a channel number to a receiving frequency ( see chapter 20). 씰 Press the SET button five times to adjust the limiter of the headphone output.
40 17 Adjusting the headphone volume 씰 Briefly press the SET button once . The display now indicates „PHonE“ in alternation with a three-digit number indicating the current volume level at the headphone output of your EK 3041- U receiver. The adjustment range of the headphone volume is between 0 an 126 (on the display).
41 18 Adjusting the squelch Your EK 3041-U receiver is equipped with an adjustable squelch control which eliminates annoying noise when the transmitters are switched on and off. It also suppresses sudden noise when a transmitter leaves the reception area and there is no longer sufficient transmitter power received by the receiver.
42 19 Changing the receiving frequency 씰 Briefly press the SET button three times . The display now indicates the preset receiving frequency in alternation with the channel number assigned. (If no channel number has been assigned, three „hyphens“ appear on the display): 씰 With the / buttons you can now select a different frequency.
43 20 Assigning a channel number You can assign a channel number (from 001 to 255) to each of the 32 receiving frequencies. With larger systems, it is recommended to use the same channel number for both transmitters and receivers in order to provide for simpler monitoring of the system.
44 21 Limiter Your EK 3041-U receiver is equipped with a switchable limiter which limits the output voltage of the built-in headphone amplifier. The limiter protects your hearing and should therefore always be switched on.
45 22 Locking the operating buttons / „ Lock mode “ function You can lock the operating buttons of your EK 3041-U to prevent accidental programming or switching off by a user inexperienced in handling the receiver. Locking the buttons 씰 Briefly press the SET button six times until „Loc“ begins to flash on the display.
46 23 Sennheiser transmitters report their battery/accupack status Sennheiser supplies hand-held and pocket transmitters ( see chapter 24) which provide information on the available transmitter battery/accupack status to the receiver. This information can be evaluated with the EM 3041- U receiver.
47 24 Suitable Sennheiser transmitters For the optimum use of the excellent reception qualities of the EK 3041-U receiver, Sennheiser offers hand-held and pocket transmitters in a variety of configura.
48 25 Safety instructions 씰 Never open electronic devices! Servicing and programming must only be done by authorised personnel and is all the more important for current- carrying units. If devices are opened by customers in breach of this instruction, the warranty becomes null and void.
49 28 Recommended accessories • GA 3041-C Base plate with special housing Cat. no. 04642 • GA 3041-B Power adaptor Cat. no. 04643 • GA 3041-15 Sony adaptor Cat. no. 04639 • GA 3041-25 Ikegami adaptor Cat. no. 04640 • GA 3041-44 Philips adaptor Cat.
50 29 Technical data Frequency range 450–960 MHz Receiver frequencies max. 32, pre-programmed to customer specifications Switching bandwidth 24 MHz Frequency stability ± 10 ppm (– 10 ° C to + 55 ° C) Sensitivity (with HiDyn plus ® ) typ.
148 Sennheiser electronic GmbH & Co. KG D-30900 Wedemark Telefon: +49 (0) 5130 600 0 Telefax: +49 (0) 5130 600 300 Printed in Germany Publ. 04/98 69668 / A 01 Aktuelle Informationen zu Sennheiser-Produkten erhalten Sie auch im Internet unter „http://www.
Ein wichtiger Punkt beim Kauf des Geräts Sennheiser EK 3041-U (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sennheiser EK 3041-U noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sennheiser EK 3041-U - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sennheiser EK 3041-U reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sennheiser EK 3041-U erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sennheiser EK 3041-U besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sennheiser EK 3041-U verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sennheiser EK 3041-U. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sennheiser EK 3041-U gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
