Benutzeranleitung / Produktwartung EB1304 NET des Produzenten Avermedia
Zur Seite of 56
AVerMedia ® AVerDiG i EB1304 NET Operation Manual www .avermedia.com www .averdigi.com.
FCC NOT ICE (Class B) This device complies with Part 15 of the FCC Rules. Operatio n is subject to the following two conditions: (1) this device may n ot cause ha rmful interference, and (2) this device m ust accept any interference received, including interference that ma y cause undesired operation.
- WARNING TO REDUCE RISK OF FIRE OR ELECTRIC S HOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN O R MOISTURE CAUTION IF THERE IS ANY DAMAGE, SHORTAGE OR IN APP ROPRIATE ITEM IN T HE P ACKAGE, PLEASE CONTACT W ITH YOUR LOCAL DEALER.
T a b l e o f C o n t e n t s Chapter 1 Intro duction ....................................... ............................... 1 1.1 Package Conte n t....................................................................................... . 1 1.2 Features and S peci fications .
8.2.1 T o Setup Remote Cons ole Setting....................................................... 44 8.3 Using the Re m ote Play back ..................................................................... 45 8.3.1 Familiariz ing the Local Playback But ton s .
.
1 C h a p t e r 1 I n t r o d u c t i o n 1.1 Package Content (1) A V erDiGi EB1 304 NET unit (2) Remote Control (batteries in cluded) (3) Quick Installation Guide (4) Power Cord * The power cord varies d epending on the standard p ower outlet of the country where it is sold.
2 1.3 Front Panel (1)(2) (3) (4) Name Function (1) DVR Power LED : Light when the unit is power on (2) HDD LED : Indicate the hard disk running state. Light when t he HDD is running (Read/Wr ite) (3) IR Sensor : Receive the signa l from the remote contr ol to operate t he unit (4) USB 2.
3 1.5 Setting Up the DVR Unit 1.5.1 Inst alling the H ard Disk The DVR unit allows user to install one hard disk. Before installing t he hard disk, make su re to set the hard d isk master jumper settin g. Adjust the jumper setting according to the instructions on the hard disk label.
4 5. Connect the end of the IDE cab le and the power connector to the hard disk 6. Secure the hard disk inside the unit then replace unit cover 7. Push the cover forward 8.
5 1.5.2 Connecting De vices The back panel of the DVR unit, user can conn ect up to 4 video came ras, 4 sensor devices, 1 alarm device and output video to a TV or CRT/LCD mon itor. Connecting the un it to a PC, through USB connection, the bundled software e nables user to transfer, playback and segmen t the video.
6 1.5.3.1 I/O Card Sensor a nd Rela y pinhole al location: The signal from the sensor (i.e., i nfra red sensors, smoke detectors, prox im ity sensors, door sensors, e tc.) is be ing tran smitted to the unit and this t riggers the system to respond and send signal to relay device (i.
7 C h a p t e r 2 O p e r a t i n g t h e E B 1 3 0 4 N E T 2.1 Familiarizing the Remote Control Buttons Use the Remote control to op erate the OSD menu on surveillance screen.
8 Button Function ( 1 1) ▼ ▼ D e c r e a s e t h e v i d e o p l a y b a c k a t t h e s p e e d o f 2 x , 4 x 8 x o r 1 6 x ( 12) ▼ ▼ F a s t p l a y t h e v i d e o p l a y b a c k a t t h e s p e e d o f 2 x , 4 x 8 x o r 1 6 x ( 1 3 ) S top pla ying / S top recording ( 1 4 ) USB backup(see 2.
9 USB BAKCUP YES(SELECT) / NO(MENU) 2.1.2 Using USB Bac kup Button User can press button to backup the AB Repeat video file. 1. Set the AB Repeat f ile (see 2.1.1 ). 2. Plug in pen drive or external hard disk to DVR system. 3. During the AB Repeat playback, pre ss button.
10 2.3 Surveillance Screen To know if the channel is b eing recorded, the “ ” record symbol would appear beside the channel number. T he (microphone) a nd (speaker) indicate th at the audio is available.
1 1 TIM E SEARCH (search b y date and tim e): 1. Use the ▲ and ▼ buttons and select SEARCH TIME . T hen press or ▼ again to m ake the selection . 2. In the SEARCH T IME , user m ay no w select the date and tim e from where you want to begin the video playback .
12 C h a p t e r 3 O S D N a v i g a t i o n T r e e The follow figure is an OSD menu t ree map. To call out the OSD men u, press on the remote control.
13 3.1 Menu Function If the unit is currently recording the video, user may have to stop video re cording to change the settings. Use remote contro l to navigate in the OS D menu.
14 OSD M ENU Description RECORD SCHEDULE 00 : 00 - 01 : 00 01 : 00 - 02 : 00 02 : 00 - 03 : 00 05 : 00 - 06 : 00 06 : 00 - 07 : 00 07 : 00 - 08 : 00 08 : 00 - 09 : 00 09 : 00 - 10 : 00 10 : 00 - 11 : .
15 OSD M ENU Description SET NW PASSWORD CURRENT NEW CONFIRM 2006 / 04 / 20 17 : 54 : 50 ON ON ON OFF NO SUBMENU PASSWORD CHANGE VIDEO ADJUSTMENT DATE TIME AUTO RECORD AUTO SCAN PASSWORD SETUP AUDIO R.
16 OSD M ENU Description AUDIO RECORD : Enable/disable a udio recor ding. To record s ound, mak e sure the audio input dev ice(ex: m icrophone) is connected to the unit AUDIO M UTE : Enable/disable to hear audi o sound. To hear so und, mak e sure the unit is connec ted to a audio o utput device (ex: sp eaker).
17 OSD M ENU Description YES HARD DRIVE SETUP OVERWRITE ENABLED HDD SIZE 37 GB 78MB HDD USED 0 GB 232MB 0% HDD FORMAT * HDD SIZE sho ws the tota l capacity of the hard disk . * HDD USED sho ws the a mount of space that has been used. OVERWRITE EN ABLED : Enable/disable over writing t he earl iest record when the hard disk space runs out.
18 OSD M ENU Description 010 SEC 010 SEC NOT INSTALLED NOT INSTALLED NOT INSTALLED NOT INSTALLED SENSOR SETUP SENSOR REC TIME ALARM OUT TIME CHANNEL - 1 CHANNEL - 2 CHANNEL - 3 CHANNEL - 4 SENSOR REC .
19 OSD M ENU Description 1 2 3 4 5001 5005 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT STATIC host addresses. Enter the subnet m ask of the I P address which user has assigned to DVR system . - GATEW A Y: A network device act as a passagewa y to inter net.
20 OSD M ENU Description 1 2 3 4 5001 5005 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT STATIC W hen DVR system gets an IP a ddress from DHCP server, the inf ormation will displ ay as below: 192.168.153.254 192.168.153.1 00.00.00.00.00.00 NETWORK INFORMATION IP ADDRESS SUB NET GATEWAY DNS MAC ADDRESS 192.
21 OSD M ENU Description 1 2 3 4 5001 5005 1 NETWORK SETUP IP MODE NW ENABLE VIDEO PORT UPGARDE PORT USER SET NW PASSWORD STATIC values and pres s or ▼ to confirm. VIDEO PORT : A port f or the rem ote c onnection. An y por t can b e assigned as a video port, except the ports already used by the network services.
22 OSD M ENU Description USB BAKCUP TIME SET START TIME END TIME : 2006 / 05 / 05 13 : 08 : 13 : 2006 / 05 / 04 10 : 00 : 01 BACKUP CHANNEL BACKUP SIZE BACKUP EXECUTE 1 2 3 4 73GB 89MB 4. And t hen, s elect BACKU P EXEC UTE to start backup video t o the USB d evice.
23 C h a p t e r 4 Using the USB Pl ayback Console 4.1 Recommended system requirements Pentium®4 2.4GHZ or abo ve W indows®2000/ XP DDR 256 MB Graphic function must support Direct Draw Audio card or built-in S p eaker 1 available USB2.0 port 4.2 Installing th e USB Playback Console T o install the USB Playback Console: 1.
24 4.3 Running the USB Pla yback Console To run the application, click the r icon on the PC desktop (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (16) (15) (14) (13) ( 17) (1) Name Function (1) Video playback sc reen (2) Open File T o select the v ideo f ile f or pla ying.
25 Name Function (3) Event List Select the event you want to playback . The event list o nly availa ble when user sel ect to playba ck in DVR Reco rded File(HD) . (4) Full screen Use the entire area of th e screen to onl y displ ay the video. T o return, press the right butto n of the mouse or ESC on the ke yboard.
26 Name Function (17) Sou nd /Sound bar Turn on an d off the sound Increase and d ecrease the volume 4.3.1 T o Cut and Sa ve the P ortion of the Recorded Video 1. Use the Playback Co ntrol b uttons or drag the ba r on the playback progress bar and pause on where you want to start the cut.
27 4.3.3 P layback Back up File(*.d vr) 1. Click Open File button. 2. Select Backup File(*.dvr) and click OK . 3. Locate the backup file folde r and click OK . i W hen o pen th e backup video file, just locate th e where backup file folder is. 4. And then, Playback Date/Time Selection window app ears.
28 C h a p t e r 5 Backup Recorded Vi deo File 5.1 Recommended system requirements Pentium®4 2.4GHZ or abo ve W indows®2000/ XP DDR 256 MB Graphic function must support Direct Draw Audio card or built-in S p eaker 1 available USB2.
29 Name Function (4) Source Disk T o select the hard d isk drive (5) T arget Path T o locate on where user wa nt to save the f ile (6) Event (%) Display the back up progres s rate of event in percenta.
30 6. Select the hard disk drive and click OK 7. And then, all the recorded video f iles w ill list out. 8. Select the event which use r wants to backup. Or mark the Select All t o select all listed recorded video event 9. Locate on where user wants to save the backup file 10.
31 C h a p t e r 6 I m a g e V e r i f i c a t i o n Image V e rification is a watermark-checking program to id entify the authenticity of a saved image (e.g. by snapshot). T his pro gram can only verify uncompressed bmp image files. 6.1 To Run the I mageVe rification 1.
32 C h a p t e r 7 Vi d e o E n h a n c e r The bundled V ideo Enhancer is a video editing t ool and can only be used with *.dvr video file. I t a llows you to adjust the video p icture quality , se gment and save the wanted portion of the video , zoom in and ou t the image, and print or save the screen shot.
33 Name Function (9) Default S et the video back to origi nal state and d elete all the c hanges in the history box. (10) Histor y Box List all the actio ns. (1 1) Undo Delete the last action. (12) Noise Red uce Adjust the softness and repair the dam aged colours.
34 C h a p t e r 8 U s i n g t h e R e m o t e P r o g r a m s User can use Microsoft Internet Explorer to access DVR system by ent ering th e IP address. T o use this f eature, m ake sure that you PC and E B 1304 NET both are connected to the internet and the Network feature is ena bled.
35 8.1 Familiarizing the WebCam Buttons Right-clicking on th e webcam video screen, en ables you to start video recording, change video quality , switch camera and enable/disable DirectDraw . Name Function (1) DirectDra w Enhance the video quality . i Not all graphic cards can support this function.
36 Name Function (1 1) Select cam eras to view Select to th e view c amera f rom dif ferent server . In Select Cam era dialog box, Displa y column, click to enable/disable vie wing the camera. Click Add Server and sel ect the server type bet ween DVR and IP Cam to add.
37 (3) Video Adjustment Select the camera and adju st the Brightness, Contrast, Hue and Saturation of the selected camera. (4) Default V al ue Set the video value back to default 8.
38 or LOW . (5) A uto Record Enable/disable auto con tinue recording when interrup ted (i.e., power breakdown, video p layback or configuration setu p). It continue recording af ter 10 second of idleness. Th is is applicable in A lways Reco rd m ode un der schedule setting.
39 - A l arm Out Time Set the amount of time (in second) to con tinue sending the alarm once activated (2) Sensor Setup - Sensor St atus Customize the initial state of the attached sensor for every camera . Refer to the table below to customize the sensor state.
40 8.1.1.4 Network Setup (1) (2) (3) (1) IP Mode - St atic IP Assign a fixed and global IP address for the DVR system IP: A ssign a constant IP add ress which real IP ad dresses give from ISP . Mask: Enter the subnet mask of the IP address which user has assigned to DVR system.
41 register their own domain name on http://www.ddns. a vers.com.tw . (See Appendix A ) - Domain Name Enter the domain name that u ser wanted. - A u th Ke y A password use to access DDNS t o register the domain name. MAC add ress of the DVR sy ste m is the key for user to register the d o main name o n A V erMedia DDNS web site.
42 8.1.1.5 Pass w ord Chang e Click Remote setup b utton on WebCam main interface, and then, click User button to call out the Password Change interface. (1) (2) (1) Superuser Change the remote accessing password o f super user . Superuser has t he authority to remote setup the DV R system configuration on W ebCam viewer .
43 8.2 Familiarizing the Remote Console Buttons (1) (3) (7) (6) (5) (4) (8) (9) (11) (12) (2) (10) (13) Name Function (1) Exit Close the Rem ote Console.
44 8.2.1 T o Setup Remote Console S etting Click Setup bu tton to call ou t the System Setting windows. Click OK to exit an d save the setting and Cancel to exit without saving the setting. (1) (1) (1) (1) (1) Storage Path Set the directory on where to save the data .
45 8.3 Using the Remote Pla yback T o use this feature, first you need to select th e so urce of the file. Click the P lay ba ck button. And then, in the Select Playback Mode dialo g box, choose Local Playback to open the file that is reco rded in the Remote Con sole, and Remote Playback to open the file that is recorded in the DVR server .
46 T o Ma ke a Selection: 1. Select the date in the c ale ndar . Use and buttons to shift the calendar to the left or right. 2. In the table below , click on the blue block to select and open the recorded f ile. T he blue block turns red when it is selected.
47 Name Function (3) Hour Buttons Select and click to pla yback the r ecorded video file o n the sp ecific time f rame. i The Hour buttons repres ent the tim e in 24-ho ur clock . The blue bar on top of the hour butto n indicates that there is a recorded video file on t hat period of time.
48 8.3.2 Familiarizi ng the Dow nload and Pla yback Buttons (2) (8) (7) (4) (6) (5) (1) (3) Name Function (1) Progress bar Show th e pro gress of the f ile b eing played. Y ou m ay move the b ar to seek at an y location of the t rack. (2) Playback Control Buttons Begin: Move at t he beginni ng of the video f ile.
49 A ppend ix A Registering Domain Names DDNS ( Dynamic Domain Name Service) is a da t a query service mainly used on t he Internet for translating domain names into Internet addresses. It allows re mote clients to intelligently sea rch dynamic se rvers without an y previous en quiring for servers’ I nternet addresses.
50 W arranty Notice L I M I T E D W A R R A N T Y AVerMedia TECHNOLOGIES, Inc . w arrants this product to be free of defects resulting from faulty manufacture or components under the following terms: .
Ein wichtiger Punkt beim Kauf des Geräts Avermedia EB1304 NET (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Avermedia EB1304 NET noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Avermedia EB1304 NET - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Avermedia EB1304 NET reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Avermedia EB1304 NET erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Avermedia EB1304 NET besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Avermedia EB1304 NET verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Avermedia EB1304 NET. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Avermedia EB1304 NET gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
